This needs to be a million subscriber channel. Great information and Steve presents it so well. I found this channel from VGG on drag week. Always been curious about the engine tech in the high HP cars, but could find any resources that really explained it. Thanks for sharing your knowledge.
Thanks so much for posting this stuff. I'm a youngish dude just getting financially set enough to really tool up and start pursuing alot of my passions. I've been building engines for about 11 years on the side and am a mechanical engineer by trade. Spent the last couple years learning and doing fabrication, Composite work, CNC machine work and fixturing. I've had a goal since I was literally a kid to design my own engine platform and put it in my own car. I starting my current pro touring build as a practice run for the next project (the big one). Im two years into the fab and machine work on this build but its been probably 4 years since the engineering began. The next builds engineering just started. Working on a midengine carbon monocoque push rod suspension deal and incorporating a stressed block design for my engine. I've studied the reher Morrison books, other local engine builders, but none are as open about some of the details you go into. It really is appreciated to a noob like me still paying the "tuition" of learning and failing.
It is so hard to believe that you are so willing to go so in depth and share so much knowledge? Not only that but you speak in a way that all can understand and don’t act like the most money spent is automatically the best!!!! I just want to thank you. Very generous.
This really brings back some memories from back in the day when I used to work in an automotive machine shop back in the early 80s. I was the cylinder head guy. ( Peterson TCM 25, Winona surface grinder, a Kwik Way SVSII high performance valve grinder, and a Sunnen guide home station ) I remember the block guy hated installing sleeves. We ended up making it a little easier by putting the block through the hot tank to heat it up and putting the sleeve in the freezer. It's amazing how much energy it takes to install a sleeve with just a thousands or so press fit. On a side note Steve ended up building an engine for a buddy of mine, check out the Mach 1 Mustang owned by Steve Ayesh. I believe the car has went into the low 7's on small tires !!!
Awesome series Steve. Very underrated & under-viewed. I have seen some third parties re-post your content with their channel branding over the top. I hope they have your permission to do so, it disappoints me to see your content getting more views and subscribers for someone else's channel when it is your knowledge and hard work.
I agree and if it was me I would send the video links to Steve so he can get them taken down. And *@Steve Morris Engines* you should start overlaying your SM Logo (or Channel Name) on your videos to 1: deter some of the thieves from posting YOUR videos without permission and 2: the overlay will be your proof that it's Your Video(s) = YTube won't hesitate to notify the channel(s) to remove the your video from they're channels.
this is the reason I had about 7 400 four bolts hanging around lol, hard to get a good machinist to do this, and this is great stuff. guys like steve are the heart beat of every good builder
MAN STEVE WITH ALL THE HOMEWORK YOU HAVE DONE OVER THE YEARS I REALLY LIKE HOW YOU THINK MY DAD WAS A MACHINIST AND WAS CONSIDER A MACHINIST MACHINIST I REALLY APPRECIATE YOU EXPLAINING THINGS AND KNOWING MY DAD WOULD HAVE REALLY LIKED WATCHING THESE VIDEOS
Thanks for sharing all of your experience Steve. Can we get a Steve tech video explaining the pros/cons, dos/don’ts for dry blocks, dry decks, 1/4 fill 1/2 fill 3/4 fill etc. pertaining to maximum effort drag racing?
SMX ! All the way Steve…. A brute block with a killer design. No wonder you’re the king of engines. Thank you for the outstanding explanation of sleeve technique.
Thanks for the very informative videos Steve! As a professor of cell biology, I appreciate method describing how these machines work and their critical points. I teach the same, so it makes learning this stuff easy
Another excellent video walking us through the technical steps of installing sleeves. Great information on what works and what doesn't, saving us time and money. Thanks again.
I'd like to know how much an SMX block would cost and I've really enjoyed watching you and Tom and the knowledge you have shared, Thanks for your time and Tom's sportsmanship.
Its pretty crazy that you spread so much of your knowledge for free, I watch videos I think I know everything about and I learn something new every time. Keep it up man.
Yup, with an alloy block you REALLY ned to use a top register to minimise the affect of the block's thermal expansion - it's small but could cuse problems with the differential if a bottom register is used.👍
This is IMO the best video I have seen on anything having to do with sleeves or sleeving an engine...the information Steve gives here in his genuine ability to explain things to where I can understand it is the best available..That SMX block is a true work of art at its finest.. looks like I will be here all day watching all of Steves videos available here..even the ones I have already watched !
Steve, the information that you provide whenever you speak is invaluable to everyone who has the good fortune to be able to listen. A superb mechanic, fabricator and friend to many. Good luck to you and be safe.
Steve, I'm an engineer by day and a tuner by night. I feel this info is gold and in comparison to tuning, I probably wouldn't share it. Keep up the great work! Love from Oz.
Calm easy going and lots of info. Really enjoy your explanations. Been in this a long time but nice to hear other guys thoughts and especially that turns out product like this. He may not know chassis so he says, but has a good (Really good) handle on noise makers! Keep it coming I’ll be here.
I look forward to your videos , I may not have the ability to build 1500 hp but I’m fascinated by all the details and knowledge you share . Thanks for sharing
I’ve done it for years and never ever had a problem with it. In fact I’ve tore engines down before that I had sleeved and the cylinders looked so much better than the factory cylinders in the same engine. I’ve had customers to come in and have me to sleeve the entire block just because they run so much Truer & wear waaaaaay less. I’m Willing to bet you can run a standard small block Chevy old model with the right sleeves in it 1,000,000 miles and disassemble it and you will not have to bore the cylinders. It will be that little amount of wear in them.
That open block design reminds me of the first 928's and the later HT4100 that Cadi had. Mercedes went to this with the lost foam casting and the Nicasil process developed by G.M. in the sixties. Still no support on the deck.
Awesome video. Thanks. Question: What about sleeving an iron LSX block to then make a 427ci or larger, boosting to 2,000 HP, for strength and reliability?
As im watching this, i have so many questions for each style and a few ideas running thru my head i would love to spend an hour picking your brain about them and a few ideas about how i want to do mine to strengthen the block
When I was a bracket racers all I ran was 350 blocks with cracks in the cylinder walls I would pick em up for $25-50 from kids trying to run NoS on a stock motor take em to my machinist have it bored 60 over, chromoly sleeved and dry block it, NHRA rated the car at 1000HP N/A then it had a 500 HP NoS Kit on top for IHRA use, and we never had any problems running broken blocks to make big power with NoS we were making about 1500HP and I spray from the time the yellows come on till I cross the finish line
Back in the 80s-90s, people tried to run wet sleeve hemis on the street - always an issue with water seeping (you had to run a low pressure radiator cap and change your oil early and often. But they did it. Sounds like they've come a long way...
Nice one, thanks Steve, a very clear explanation. A quick but possibly a stupid question. has anyone tried to machine a spacer plate into the top of the block to use a mid sleeve system but creating a full surface as a dry deck and then machine part of the top of the sleeve so that you still register top and bottom?
It seems like the interference fit sleeves with protrusion and separate head/block water jackets would be hugely beneficial if you live across the country from your engine builder and don't want to trust Clem down at the engineering shop to deck your heads and block and hone your cylinders in the event you torch a head gasket. *ring ring* "Send me a set of sleeves, pistons, and rods, please" Throw it in with new gaskets and hit the track next day. Is there also some modularity to the system? For instance, if SME builds you an engine with a bore size on the smaller end, can you swap sleeves and pistons to change displacement?
Thanks for taking the time to make these videos ! Since the repair sleeve (for iron blocks) is made of a stronger material than the "cast iron" block, if there wasn't a crack in the parent sleeve, wouldn't the repair be actually stronger than the LSX/OE?
Curious what kind of V4 engine Mr Morris can make. You can beef up a V4 engine and then use 2 big twin turbos. 1,250 hp per piston.. I think Mr. Morris can make it happen!
My 92 cadillac deville has the mid sleeve but not with the water ports just smooth sleeves and they're known to have head gasket problem so I'm switching to ls4
Best to use a original 1966 to 2006 Big Block Chevy, they can handle 1,500+ horsepower, without a problem. I just put a original 1967 440 in my old Dodge, BEST CAR EVER. OLD SCHOOL IS BEST.
Awesome video! I didn't realize there were that many kinds of sleeves. Thanks for the info. Hopefully one day i can get you to build me a badass motor!
Very nice explanation and sound engineering on your improved block. What is the max horsepower on your block? I have a question. One of my friends has a 1969 052 Zl1 aluminum block. Some of the sleeves are above the deck with some below. Is it possible to deck this and match all sleeves to top of deck if deck height permits. If so what gaskets would you use. The fire ring should compress directly on top of the sleeve correct. The bore will be 4.310 or .060 over. Love your videos and knowledge much appreciated. Thanks!
So.....what would be a decent price to do a couple sleeves on a Ford 4.6 aluminum block? I "think" I have a crack in one, maybe two cylinders. I know it will vary per market but just a general idea. Not often you find this type of detail in a video, nice job. (subbed)
I just took an 18 minute course with Morris and didn’t have to pay for it amazing appreciate everything you do Steve
The way he explains everything..he makes it so easy to understand
This needs to be a million subscriber channel. Great information and Steve presents it so well. I found this channel from VGG on drag week. Always been curious about the engine tech in the high HP cars, but could find any resources that really explained it. Thanks for sharing your knowledge.
I agree !
@@stevemorrisracing he Steve doyoulsx
Wow. Seeing is believing. Your SMX deck is so much stronger -- has the meat to be a beast.
Thanks so much for posting this stuff. I'm a youngish dude just getting financially set enough to really tool up and start pursuing alot of my passions. I've been building engines for about 11 years on the side and am a mechanical engineer by trade. Spent the last couple years learning and doing fabrication, Composite work, CNC machine work and fixturing.
I've had a goal since I was literally a kid to design my own engine platform and put it in my own car. I starting my current pro touring build as a practice run for the next project (the big one). Im two years into the fab and machine work on this build but its been probably 4 years since the engineering began.
The next builds engineering just started. Working on a midengine carbon monocoque push rod suspension deal and incorporating a stressed block design for my engine. I've studied the reher Morrison books, other local engine builders, but none are as open about some of the details you go into. It really is appreciated to a noob like me still paying the "tuition" of learning and failing.
It is so hard to believe that you are so willing to go so in depth and share so much knowledge? Not only that but you speak in a way that all can understand and don’t act like the most money spent is automatically the best!!!! I just want to thank you. Very generous.
This really brings back some memories from back in the day when I used to work in an automotive machine shop back in the early 80s. I was the cylinder head guy. ( Peterson TCM 25, Winona surface grinder, a Kwik Way SVSII high performance valve grinder, and a Sunnen guide home station )
I remember the block guy hated installing sleeves. We ended up making it a little easier by putting the block through the hot tank to heat it up and putting the sleeve in the freezer. It's amazing how much energy it takes to install a sleeve with just a thousands or so press fit.
On a side note Steve ended up building an engine for a buddy of mine, check out the Mach 1 Mustang owned by Steve Ayesh. I believe the car has went into the low 7's on small tires !!!
Awesome series Steve. Very underrated & under-viewed. I have seen some third parties re-post your content with their channel branding over the top. I hope they have your permission to do so, it disappoints me to see your content getting more views and subscribers for someone else's channel when it is your knowledge and hard work.
I agree and if it was me I would send the video links to Steve so he can get them taken down.
And *@Steve Morris Engines* you should start overlaying your SM Logo (or Channel Name) on your videos to 1: deter some of the thieves from posting YOUR videos without permission and 2: the overlay will be your proof that it's Your Video(s) = YTube won't hesitate to notify the channel(s) to remove the your video from they're channels.
Engine builder has permission.
Thank you Steve for all your technical information. I have learn so much. Please keep you videos coming.
THIS GUY WOULD MAKE A GREAT TEACHER! STRAIGHT THROUGH ON EXPLAINING, NO GETTING LOST IN THE WOODS. 🎉
this is the reason I had about 7 400 four bolts hanging around lol, hard to get a good machinist to do this, and this is great stuff. guys like steve are the heart beat of every good builder
This guy knows so much about engineering. Listen and practice what he says. You be a winner.
MAN STEVE WITH ALL THE HOMEWORK YOU HAVE DONE OVER THE YEARS I REALLY LIKE HOW YOU THINK MY DAD WAS A MACHINIST AND WAS CONSIDER A MACHINIST MACHINIST I REALLY APPRECIATE YOU EXPLAINING THINGS AND KNOWING MY DAD WOULD HAVE REALLY LIKED WATCHING THESE VIDEOS
The smx block is a work of art
I'm amazed at the knowledge you have.
New to the game but learning quickly. Old Dogs can be trained and Steve's expertise and common man's delivery of information is spot on!!
Thanks for sharing all of your experience Steve. Can we get a Steve tech video explaining the pros/cons, dos/don’ts for dry blocks, dry decks, 1/4 fill 1/2 fill 3/4 fill etc. pertaining to maximum effort drag racing?
Great guy with tons of knowledge and experience
SMX !
All the way Steve….
A brute block with a killer design.
No wonder you’re the king of engines.
Thank you for the outstanding explanation of sleeve technique.
Thanks for the very informative videos Steve! As a professor of cell biology, I appreciate method describing how these machines work and their critical points. I teach the same, so it makes learning this stuff easy
Love your work Mr morris. Very talented human being.
Lots of love from down here in australia
This has actually explained something that I have been curious about. Great tutorial!
Another excellent video walking us through the technical steps of installing sleeves. Great information on what works and what doesn't, saving us time and money. Thanks again.
I'd like to know how much an SMX block would cost and I've really enjoyed watching you and Tom and the knowledge you have shared, Thanks for your time and Tom's sportsmanship.
Check his website.
Its pretty crazy that you spread so much of your knowledge for free, I watch videos I think I know everything about and I learn something new every time. Keep it up man.
Also used one of your F1-X pro volutes compared to a smooth aluminum bell, insane how much better yours works.
You re the master - Best explanation of the risks with the Darton mids I have heard - great info - thanks!
Steve you are always "Teaching Me Something!" Thank You, J
Thanks Steve learned alot today me and my son are watching where in the process of sleeve our dart ls block
Making the complex simple is the mark of a great teacher! Thanks so much!
Yup, with an alloy block you REALLY ned to use a top register to minimise the affect of the block's thermal expansion - it's small but could cuse problems with the differential if a bottom register is used.👍
Your the freaking man bro. Love from New Zealand.
Yep I just learned something and realized this channel is excellent. Thanks Steve great job !
This is IMO the best video I have seen on anything having to do with sleeves or sleeving an engine...the information Steve gives here in his genuine ability to explain things to where I can understand it is the best available..That SMX block is a true work of art at its finest.. looks like I will be here all day watching all of Steves videos available here..even the ones I have already watched !
Not something I'm EVER going to find myself involved in, but absolutely fascinating.. Thank you for taking the time to explain :)
I love engines and love watching Steve tech that smx block is badass its a work of art
Thanks Steve for producing your videos. You and KSR are making great videos. You guys could be the Jay Leno of engine and fabrication.
Steve, the information that you provide whenever you speak is invaluable to everyone who has the good fortune to be able to listen. A superb mechanic, fabricator and friend to many. Good luck to you and be safe.
Steve, I'm an engineer by day and a tuner by night. I feel this info is gold and in comparison to tuning, I probably wouldn't share it. Keep up the great work! Love from Oz.
The wet sleeve block reminds me of the most recent Ford focus rs block and all the head gasket issues those had.
I totally freaking feel that you could rule the jet boat world of the water
Awesome explanation! Thank you Mr. Horsepower!
This is really terrific stuff. I had no idea the LSX blocks failed that way.
A wonderful useful informations.
At ur knowledge experiences, you still explain in a way for a beginner enthusiast
Easy to understand. Thank you
Calm easy going and lots of info. Really enjoy your explanations. Been in this a long time but nice to hear other guys thoughts and especially that turns out product like this. He may not know chassis so he says, but has a good (Really good) handle on noise makers! Keep it coming I’ll be here.
I look forward to your videos , I may not have the ability to build 1500 hp but I’m fascinated by all the details and knowledge you share . Thanks for sharing
The probably of me putting a sleeve in an engine is slim to none, but it’s nice to see the process and how they go in
I’ve done it for years and never ever had a problem with it. In fact I’ve tore engines down before that I had sleeved and the cylinders looked so much better than the factory cylinders in the same engine.
I’ve had customers to come in and have me to sleeve the entire block just because they run so much Truer & wear waaaaaay less.
I’m Willing to bet you can run a standard small block Chevy old model with the right sleeves in it 1,000,000 miles and disassemble it and you will not have to bore the cylinders. It will be that little amount of wear in them.
@@e-racer4673 I don’t trust myself to sleeve my own engine I’d rather send it to a machine shop
That open block design reminds me of the first 928's and the later HT4100 that Cadi had. Mercedes went to this with the lost foam casting and the Nicasil process developed by G.M. in the sixties. Still no support on the deck.
This was gold thank you. I learned so much.
Awesome video. Thanks. Question: What about sleeving an iron LSX block to then make a 427ci or larger, boosting to 2,000 HP, for strength and reliability?
Sweet ........ Everyone go racing and have some fun ... Thanks Steve
Thank you for taking the time to teach us. Highly enjoy learning from guys like you.
As im watching this, i have so many questions for each style and a few ideas running thru my head i would love to spend an hour picking your brain about them and a few ideas about how i want to do mine to strengthen the block
Thanks, Steve that was some very good information. I appreciate the time you take to let us know about various stuff. Keep it coming.
When I was a bracket racers all I ran was 350 blocks with cracks in the cylinder walls I would pick em up for $25-50 from kids trying to run NoS on a stock motor take em to my machinist have it bored 60 over, chromoly sleeved and dry block it, NHRA rated the car at 1000HP N/A then it had a 500 HP NoS Kit on top for IHRA use, and we never had any problems running broken blocks to make big power with NoS we were making about 1500HP and I spray from the time the yellows come on till I cross the finish line
ROL gaskets are the best gaskets Ive ever used on sbc.
Awesome. Really cool to see your chan and to see you with Tom.
Back in the 80s-90s, people tried to run wet sleeve hemis on the street - always an issue with water seeping (you had to run a low pressure radiator cap and change your oil early and often. But they did it.
Sounds like they've come a long way...
So wonderfully explained, so clear. Thanks Mr. Morris
Those are some fancy fancy sleeves, but cutting the top of your block hollow weakens the crap out of it.
Nice one, thanks Steve, a very clear explanation. A quick but possibly a stupid question. has anyone tried to machine a spacer plate into the top of the block to use a mid sleeve system but creating a full surface as a dry deck and then machine part of the top of the sleeve so that you still register top and bottom?
thanks steve. love learning this things
Absolutely awesome! Thank you for educating me!
It seems like the interference fit sleeves with protrusion and separate head/block water jackets would be hugely beneficial if you live across the country from your engine builder and don't want to trust Clem down at the engineering shop to deck your heads and block and hone your cylinders in the event you torch a head gasket.
*ring ring* "Send me a set of sleeves, pistons, and rods, please" Throw it in with new gaskets and hit the track next day.
Is there also some modularity to the system? For instance, if SME builds you an engine with a bore size on the smaller end, can you swap sleeves and pistons to change displacement?
Thank you for your wisdom!!! Hopefully one I will have enough money to buy one of your blocks!!!
Thanks for taking the time to make these videos !
Since the repair sleeve (for iron blocks) is made of a stronger material than the "cast iron" block, if there wasn't a crack in the parent sleeve, wouldn't the repair be actually stronger than the LSX/OE?
Yeah should you simply sleeve an OE LSX block to begin with?
Thank Steve. Another great explanation on components and procedures. Very interesting.
Learning about sleeving has never been so interesting
Awesome video Steve , very informative thanks for sharing
Great series ! thank you for the education !
Curious what kind of V4 engine Mr Morris can make. You can beef up a V4 engine and then use 2 big twin turbos. 1,250 hp per piston.. I think Mr. Morris can make it happen!
Thanks
My 92 cadillac deville has the mid sleeve but not with the water ports just smooth sleeves and they're known to have head gasket problem so I'm switching to ls4
Thanks for sharing. Often wondered how that was done.
Best to use a original 1966 to 2006 Big Block Chevy, they can handle 1,500+ horsepower, without a problem.
I just put a original 1967 440 in my old Dodge, BEST CAR EVER.
OLD SCHOOL IS BEST.
Really have enjoyed your tech videos Steve, and its nice you have started doing them more often
Awesome video! I didn't realize there were that many kinds of sleeves. Thanks for the info. Hopefully one day i can get you to build me a badass motor!
Love the smx
Live your videos Steve. Watching this from little old new Zealand
Damn that's good information, I am less dumb than I was yesterday.
Awesome stuff. Very cool
Thanks Steve very interesting and informative. Really enjoy your channel !
Great video easy to understand info!!
Darton MID sleeves have their place on factory engines with an open deck block.
Would love to have your mechanics knowledge!! Awesome info 👌
I absolutely love these videos! I’m curious about other metals used or is aluminum the go to?
Also: Sign the rpm act!!
Nothing to lock in place, Steeve 🏁
The knowledge this dude has is ridiculous
Very nice explanation and sound engineering on your improved block. What is the max horsepower on your block? I have a question. One of my friends has a 1969 052 Zl1 aluminum block. Some of the sleeves are above the deck with some below. Is it possible to deck this and match all sleeves to top of deck if deck height permits. If so what gaskets would you use. The fire ring should compress directly on top of the sleeve correct. The bore will be 4.310 or .060 over.
Love your videos and knowledge much appreciated. Thanks!
Good job Steve.great details.Thank you.
Great video Steve
Thanks you for information I appreciated 👏
thanks Steve,,
These videos are so informative I really appreciate these so much.
Nicely explained 👍
So.....what would be a decent price to do a couple sleeves on a Ford 4.6 aluminum block? I "think" I have a crack in one, maybe two cylinders. I know it will vary per market but just a general idea. Not often you find this type of detail in a video, nice job. (subbed)
Thanks Steve!!
Thanks for your knowledge. I really enjoy learning from u
lots of great infomation....
Thanks again Steve .
Thanks for the info on this i always wanted to know the difference
Thanks Steve for the info the right way. Ronnie.