CYLINDER SLEEVE INSTALLATION PROCEDURE
Vložit
- čas přidán 3. 06. 2023
- Cylinder sleeves are typically installed into the cylinder
using an
"interference fit" (sometimes referred to as
"press fit"). This means the size of the block or cylinder
bore is smaller than the outside diameter of the sleeve.
The sleeve is "pressed" into the cylinder and the size
variance holds the sleeve in place. Generally, the
interference fit for the sleeve to a cast iron bore is
.0025". And for aluminum bore the interference fit is
.004"
#howto #installation #cylinder #sleeves #process #om #mercedes #benz #diesel #engine #amazing #intresting #satisfying #skills #vintage #classic #old #cars #car #mechanical #tricks #method #easy #simple #good #eduction #video #workshop #press #honing - Auta a dopravní prostředky
感恩了解,謝謝分享!
You’re welcome 😊
useful👍
Thank you 🙏🏾
May I ask what's the tolerance of the liner. Im a beginner in machining.🥰
The liner is 0.04 mm larger than the cylinder
Qual o aço para fazer camisa de cilindros obrigado
Cast iron
good engine new metal sleeves installation in the combystion chamber # but before installation diameter of sleeve should be extremely accurately measured since it will decrease the diameter of cylinder ( combustion chamber ) & sleeve diameter should allow piston to move inside it without having any tiny gap # 👍🇵🇰
Correct 👍🙏🙏
What no hammering😂
It is not necessary in our method
First time i see no hammering or dry ice
Yes, the impossible becomes possible in our workshop
Sir kindly apna address ya contect numbr dain
Hello, my friend, you can contact me at this email address
Video has no point
Thank you for watching and commenting