Big tip on squeaky trucks, it's 90% the pivot of your trucks and your pivot cup. Just last night I decided to fix the squeaky trucks using chapstick. First I just applied it to the pivot and the pivot cup and that eliminated most of the squeak, but once I gave some to everywhere else, it's basically gone.
This is a very short term fix, in my experience this will just hold on to dirt and stuff and pretty much be gone within a a day or two in my experience. Some wax will last longer (I think I have had it last about a week). But hey maybe that doesn't match your experience.
i want you all to know this is normal. ive been through maybe 6-7 boards with the same trucks. trucks usually last years on years. as long as they're indies tho lmao
Dawn works great in pivot cups of squeaky trucks. just put a drop on your finger a shove you finger in the pivot cup and rub it around a bit. I did it a month ago on my aces and they are smoother and quieter than ever!
1:08 yeah i had some decade old team chris cole thunders i got from a friend because i needed some 145s and he doesn't use em anymore, and i put those hangers on my hollow lights 147s baseplate. also one time i had to put indy stage 10 hangers on a tensor mag baseplate, had to put taller bottom bushing shorter top bushing but oddly it fit perfectly.
I feel like this is for sure one of the parts of the board you can go the most lax on, especially if you mainly just do fliptricks, but its still really important to keep them in check.
ha I typed this up two days ago hoping to see one of ur videos, and then this got recommended to me today. thx! btw I've been skating mine for about a year
The only reason I got new trucks is because I didn’t realize my first ones were too small, so I got new ones that actually fit my board correctly. Other than that, I have had the same ones
Grand video! found a discarded broken skateboard in the bushes across the road from my house and it was just really the deck (broken in half) that needed replaced but had some squeaks when i rode it. Figured out from this video one of the pivot cups was split! Easy fix and I literally have a brand new skateboard for (almost) free :)
It's be great to see what "Frankentruck" combinations work and which don't. I've got spare Thunder 7.75" hangars lying around, and a pair of 8" Tensors that I'd be interested in combining to be able to skate a skinnier deck, and I'd be interested in seeing how they'd turn compared to stock.
I don't think I have a big enough pile of old trucks to try all of the combinations! I'm sure most would fit together, but the turning might feel wonky if the angle of the pivot doesn't match the angle of the pivot cup. If you give it a try let us know how well it worked! Cheers! - Tim
I use a very small amount of lithium grease in my pivot cups. I keep a solution of fragrance/dye free bar soap dissolved in water in a eye dropper type bottle with my board at all times (kept adding water a little at a time until the soap fully dissolved). Lots of dust in the desert, soapy water dries up and flakes out, all the dirt and dust falls away eliminating squeaking and prolonging component life. I soap daily, sometimes twice, only takes a single drop for bushings and for pivot cup. I clean pivot cups with q-tips and reapply lithium grease about once a month. The tip nobody mentions is: Your bearings will not insert and stay flush within the wheel hub while dry. Grease up your wheel hub before inserting your bearings (combined with spacers this is the best tip for speed). Longboarders have the best skate advice when it comes to maintenance considering they rarely have sponsorship and actually care about top end performance. Board stompers are talented with tricks, however seem to be dogmatic and proud of ignorance, two less then respectable qualities I think. I ride pools and bomb hills with 9" ace af1 trucks and a 15.25" wheel base. Via custom bushing (all four are different durometers) my setup will carve on a dime and hill bomb without speed wobbles. Everyone who steps on my board loves it, even the tight truck types acknowledge the balance of responsiveness and stability. Look to long distance pump, slalom and downhill skateboarders for the best advice on bushings, bearings and maintenance tips.
Ahaha Frankenstein Trucks, when I was a kid I use to have the bottom part thunders and the grind part were some royals that a friend gave me. Now I just have indies reg.
If you have a hard time with your trucks not turning good when you first get them no matter how much you loosen them then wax your brand new bushings. The wax keeps your bushings slippery against the washers and hanger and temporarily makes your bushings feel broken in until they actually fully break in.
I thought of an idea that could help stop base plate holes from getting bigger. Have a 45 degree or similar tapered nut and have the same taper in the base plate holes. This could possibly make the base plates last longer. Vehicle's have this design in the wheels. But the only thing is that you would have to have the right nut with the base plate other ways it will not work well and I know many skateboarders would not be happy about the compatibility issues this would cause.
Hey Tactics, I own a truck size for a 7.75 and I’m considering moving up a deck size to an 8. Will there be any differences? Let me know what you guys think
The 7.75 trucks will definitely work on an 8.0 deck. Some tricks will feel a little different because the pressure points will be in a different spot, but it'll only take you about one session to get used to it and you won't even notice it anymore. 👍 Cheers! - Tim
I often pair up 7.75 trucks on 8.00 decks with different wheel combos, you'll most likely never notice the difference. It is less than 1/8" split variance per side when mounted per side.
I still have the trucks that came with my complete, at this point I’ve switched out basically everything except the trucks. I want new ones because these ones have no clearance, so now that I’m trying to learn to grind I’m grinding straight onto the kingpin nut (I don’t know if that’s what it’s called). But I can’t afford new trucks rn so I’ll have to wait.
Unfortunately we and many other online retailers are sold out at the moment. There's a nation-wide skate hard goods shortage because of Covid-19 and it's been hard for skateshops all over to restock. There might be one at your local shop, someone's gotta have one out there! What brand were you looking for? - Tim
I already had a skate tool and didn’t want to go get a new one with a rethreader cause my nuts wouldn’t go back on so I went to ace hardware got a 5/16 24 count rethreader and rethreader holder and some 5/16 24 count locking nuts
Hey. I got an old board and trying to restore it. I realise that the nipple sitting in the pivot cup is worn out by 30%. The diameter is not only smaller, it is not round anymore. Is this even possible when there is a rubber pivot cup in place?
How to fix the broken baseplate, but my baseplate isn't too broke, just a lot of pieces near the pivot area, and that's very disturbing to take control the board,
Use a mini sledge to get them kingpins out! If not your gonna have to channel your inner Thor 🤣! Thunders Hollow Lights 2s I bought looked like they had glue or loctite on it helping build the kingpin in?
"Channel your inner Thor" 😂🔨 Yeah, sometimes it's a pain to get that kingpin out! I've never seen loctite on them, but those splines make it much harder to get the kingpin out that it was 10 years ago when they didn't have them. 😄✌ - Tim
@@tacticsboardshop it wasn't red or blue it was clear / yellow. I instantly thought of super glue. I've never seen that before. Most of the time I can knock them out no problem but this time it was a FIGHT. I swap the original Kingpins for Krux dlks for more clearance. They fit alot of trucks as long a the baseplate is flat where the two meet. If the baseplate has a cylindrical canal it won't work. An old bowl skater gave me the idea when I watched his video on swapping kingpins for the old Grind King inverted kingpins.
If people haven't tried Havoc trucks, I'd recommend them, affordable, light weight, can buy several pairs for under 100.00, slick and great for grinds or 50/50. Might also want to skate Bullet trucks.
@@alonsoundesign Since Bullet is more of a price point brand, their not going to be as strong as the major brands like Independent, Thunder, Ace, etc. But they are a decent truck that will serve you well as long as you're not skating in extreme situations. 👍 Cheers! - Tim
I’m trying to get my truck top part with the axel off the baseplate but the kingpin nut is kind of inside the top busing and I can’t take the top part off because it’s stuck in the bushing it happened because I took the protecter cap off and now the nut won’t come off
You're going to need to use a different tool to loosen that sucker. Try using a visegrip to get a solid hold of the kingpin nut. Worst case scenario is you'll have to cut off pieces of your top bushing so you can get to the nut and then just replace the top bushing. I hope that helps! - Tim
Do I need new wheels? For some of em the bearings just slip right out. You don’t have to pry em with the trucks. They just fall out. I don’t think that’s normal. Help pls
Are the wheels super old? There's not much you can do for a wheel if the bearing slot is all stretched out. 😕As long as it doesn't affect your skating and rides fine, you should be able to just skate the wheels anyway. But if they're causing your bearings to bust or make your wheels to fall off, then you should probably get some new wheels. Stay safe out there! - Tim
@@tacticsboardshop alright thanks for your help :) the wheels aren’t super old. It’s my first board and I bought a complete. The bearings that were included were really hard to pry out. Really really hard. And when I was prying em out, I dented the metal bearing shields and they don’t spin anymore. I replaced the bearings to reds. Most of the reds go in and out of the wheel like normal wheels but I think 2 of them just slip out. I can still ride it it’s just really really bumpy. Skating rough pavement is a big no for me cuz it feels like an earthquake in my legs.
Why is it so hard to find replace baseplates for independent trucks? My hardware holes are stretched out too much. Also, I feel like you should have gone over how to prevent this because it can be pretty annoying when your skateboard keeps turning by itself due to this problem.
Tighten your hardware every session this is the determining factor for me and my thunders which are very prone to baseplate stretching prior to me tightening them and checking them all the time I got about a year before they got stretched. I’m current on my second + year on standard thunders and they are only still pretty good. I even had to buy the thunder rebuild kit to get new bushing which is a first for me, I usually just ride trucks till they are stretched and then move on one loose hardware actually makes a difference I dunno how kids purposely and willingly skate with 3 bolts I just retighten every nutt every session and if I’m doing a lot of tailslides or noseslides I’ll even check the mid session sometimes
Does it matter if u have bad skateboard hardware cuz when I first brought my skateboard I decided to use wallmart skateboard hardware so I can save some money and my skateboard is really bad wheels are really slow and skateboard is uneven so m tryna figure the problem
My trucks pop when I lean, and I tried just Greasing them up I little bit and loosening the king pen a bit and it didn’t work. Do you have any tips on how to fix that?
You don't necessarily need them, but they definitely help keep you speed a little better. If you're wanting some, you could go to your local skate shop and they'll probably just give you some for free. Or ask other skaters if they have any extra ones in a box of old parts. Or in the worst case scenario, you could just get some small thin washers from a hardware store. I hope you can track some down! - Tim
I have a problem with my skateboard and it’s probably because I built it and the problem is that on one truck one wheel touches the ground and the other one doesn’t and the same thing with my other truck and it’s not the bushings because their brand new so idk what to do if u have the answer pls let me know 😢
Have you checked to see if the deck is warped? Sometimes skateboard decks aren't perfectly straight and kind of twist very slightly and can make your board wobble like a stool with uneven legs. Look down the deck lengthwise and try to see if the deck slightly corkscrews. If it's slightly warped it wont affect your skating too much, but if it's really warped, it'll make everything feel a little off. If it's warped you should be able to return or exchange it because it's defective. Take care! - Tim
Trucks are identical when they are new, so if you want to be able to differentiate between them, you can put a mark on them or something like that. I usually just know which truck is my front/back from the grind marks on them. Often I'll have a pretty defined groove from doing crooked grinds, so I can always tell which one is the front. But if they're new, then it doesn't matter which one you put on the front/back. Cheers! - Tim
If you have more questions, check out our full truck maintenance guide here. 🤝❤
www.tactics.com/info/how-to-maintain-skateboard-trucks
Big tip on squeaky trucks, it's 90% the pivot of your trucks and your pivot cup. Just last night I decided to fix the squeaky trucks using chapstick. First I just applied it to the pivot and the pivot cup and that eliminated most of the squeak, but once I gave some to everywhere else, it's basically gone.
Board Giveaway At 100 Subs, I’m Almost There🛹⚔️
yeah it’s always the pivot cups for me
This is a very short term fix, in my experience this will just hold on to dirt and stuff and pretty much be gone within a a day or two in my experience. Some wax will last longer (I think I have had it last about a week). But hey maybe that doesn't match your experience.
Or tight/broken bushings
or just sprinkle or put a little piece of wax in it and it the sound is gone
I'm still on my first pair 😅
Same hahahahaha
How long have u been skating
same i’ve been on the same ones for a year and i got pilot ones
I don't ever wanna change mine even though I'm almost almost at the axel on my thunders.
I might just get indys soon
i want you all to know this is normal. ive been through maybe 6-7 boards with the same trucks. trucks usually last years on years. as long as they're indies tho lmao
Thanks for that bushing tip, now it’s quieter than ever
How could anyone dislike Theese videos they're short but still manage to tell you just about everything you need to know on skateboarding
Agree. The video isn’t stretched out to 10 mins for ad rev. No repeated information.
Yeah like these videos are amazing
Probably dislikes from kids/teens who love garbage TikTok "hack" videos instead of knowledgeable people putting out quality information. Smh.
Kooks did it
some men just want to watch the world burn
Loving these these videos been skating for 2 Years now and still learning new things
Wassup tactics!! Hope y’all have. A great day! ☮️
Dawn works great in pivot cups of squeaky trucks. just put a drop on your finger a shove you finger in the pivot cup and rub it around a bit. I did it a month ago on my aces and they are smoother and quieter than ever!
wait whats dawn??
@@ryanlee9150 soap
These videos are very calming for me haha. i love the way theyre edited and filmed
1:08 yeah i had some decade old team chris cole thunders i got from a friend because i needed some 145s and he doesn't use em anymore, and i put those hangers on my hollow lights 147s baseplate. also one time i had to put indy stage 10 hangers on a tensor mag baseplate, had to put taller bottom bushing shorter top bushing but oddly it fit perfectly.
Nice! Always love a good Franken-truck! 🛹🧟♂️ 😄
I feel like this is for sure one of the parts of the board you can go the most lax on, especially if you mainly just do fliptricks, but its still really important to keep them in check.
ha I typed this up two days ago hoping to see one of ur videos, and then this got recommended to me today. thx! btw I've been skating mine for about a year
Board Giveaway At 100 Subs, I’m Almost There🛹⚔️
I usually put a sticker under the baseplate of the trucks on my board so my trucks don't squeak at all and it definitely works for sure.
The only reason I got new trucks is because I didn’t realize my first ones were too small, so I got new ones that actually fit my board correctly. Other than that, I have had the same ones
Grand video! found a discarded broken skateboard in the bushes across the road from my house and it was just really the deck (broken in half) that needed replaced but had some squeaks when i rode it. Figured out from this video one of the pivot cups was split! Easy fix and I literally have a brand new skateboard for (almost) free :)
Hell yeah bro! I remember I dug my first skateboard out the trash lol
I’ve been skating for a year but I still enjoy these videos lol
It's be great to see what "Frankentruck" combinations work and which don't.
I've got spare Thunder 7.75" hangars lying around, and a pair of 8" Tensors that I'd be interested in combining to be able to skate a skinnier deck, and I'd be interested in seeing how they'd turn compared to stock.
I don't think I have a big enough pile of old trucks to try all of the combinations! I'm sure most would fit together, but the turning might feel wonky if the angle of the pivot doesn't match the angle of the pivot cup. If you give it a try let us know how well it worked! Cheers! - Tim
I use a very small amount of lithium grease in my pivot cups. I keep a solution of fragrance/dye free bar soap dissolved in water in a eye dropper type bottle with my board at all times (kept adding water a little at a time until the soap fully dissolved). Lots of dust in the desert, soapy water dries up and flakes out, all the dirt and dust falls away eliminating squeaking and prolonging component life.
I soap daily, sometimes twice, only takes a single drop for bushings and for pivot cup. I clean pivot cups with q-tips and reapply lithium grease about once a month.
The tip nobody mentions is: Your bearings will not insert and stay flush within the wheel hub while dry. Grease up your wheel hub before inserting your bearings (combined with spacers this is the best tip for speed). Longboarders have the best skate advice when it comes to maintenance considering they rarely have sponsorship and actually care about top end performance. Board stompers are talented with tricks, however seem to be dogmatic and proud of ignorance, two less then respectable qualities I think.
I ride pools and bomb hills with 9" ace af1 trucks and a 15.25" wheel base. Via custom bushing (all four are different durometers) my setup will carve on a dime and hill bomb without speed wobbles. Everyone who steps on my board loves it, even the tight truck types acknowledge the balance of responsiveness and stability.
Look to long distance pump, slalom and downhill skateboarders for the best advice on bushings, bearings and maintenance tips.
best skate channel on CZcams! 👍🏻
Been skating the same trucks since '98, thinking about grabbing a new pair.
I've had the same trucks for 4 years
Ahaha Frankenstein Trucks, when I was a kid I use to have the bottom part thunders and the grind part were some royals that a friend gave me. Now I just have indies reg.
3:47 you can also do it with dishwasher, be careful not to add too much though!
Cool idea to put wax on the bushings to stop squeak 🐁. Thanks for that!
If you have a hard time with your trucks not turning good when you first get them no matter how much you loosen them then wax your brand new bushings. The wax keeps your bushings slippery against the washers and hanger and temporarily makes your bushings feel broken in until they actually fully break in.
i need more videos like this. just with all the other skateboard parts haha
When u should get a new skateboard deck ! That’s a good a idea make a video about it
When the old one snaps
Razortail
Board Giveaway At 100 Subs, I’m Almost There🛹⚔️
Most needed tip
Holy shit thank you so much for the squeaky truck tip, just built a new board and the squeak was subtle but annoying
if you wax your pivot cups that can help a lot more with squeaking than waxing bushings
Ill add one. Axle shift.
additional tip, put wax into the pivot cup too
I thought of an idea that could help stop base plate holes from getting bigger. Have a 45 degree or similar tapered nut and have the same taper in the base plate holes. This could possibly make the base plates last longer. Vehicle's have this design in the wheels. But the only thing is that you would have to have the right nut with the base plate other ways it will not work well and I know many skateboarders would not be happy about the compatibility issues this would cause.
Thanks bro
Hey Tactics, I own a truck size for a 7.75 and I’m considering moving up a deck size to an 8. Will there be any differences? Let me know what you guys think
The 7.75 trucks will definitely work on an 8.0 deck. Some tricks will feel a little different because the pressure points will be in a different spot, but it'll only take you about one session to get used to it and you won't even notice it anymore. 👍 Cheers! - Tim
@@tacticsboardshop Good to know! Thank you so much!
I often pair up 7.75 trucks on 8.00 decks with different wheel combos, you'll most likely never notice the difference. It is less than 1/8" split variance per side when mounted per side.
I still have the trucks that came with my complete, at this point I’ve switched out basically everything except the trucks. I want new ones because these ones have no clearance, so now that I’m trying to learn to grind I’m grinding straight onto the kingpin nut (I don’t know if that’s what it’s called). But I can’t afford new trucks rn so I’ll have to wait.
Thank you sir
That squeaking tip was great
Please make a wheel review on the new OJ “Nomads” wheels
(Like this so they see it)
Another on about squeaking, drop some wax pieces inside the pivot, that also fix some squeaking
The bushing game
Instructions unclear, got arrested for assaulting a truck loaded with a shipment of skateboards
0:52 bro pulled a George Poulos
Finally 🙏 thanks sir !!
I have a regular skateboard and I’m gonna put longboard wheels on it
This is a great video, although I do have one question; where can I order truck rebuild kits from online?
Unfortunately we and many other online retailers are sold out at the moment. There's a nation-wide skate hard goods shortage because of Covid-19 and it's been hard for skateshops all over to restock. There might be one at your local shop, someone's gotta have one out there! What brand were you looking for? - Tim
Another way to eliminate the squeaky trucks is rubbing a little dawn dish soap on your finger and putting a light coat on the bushings and pivot cup.
How can we clean over grip tape 👉🏻🤔
One of my bushings are cracked but It still skates well and I don't get wheel bite
Yup, as long as they still skate the way you like them, then it's all good! 👍
been 2 years and I’ve still been on my same pair 💀
My trucks are always luse but i don't do anything, i fix them and they lusen again.
I already had a skate tool and didn’t want to go get a new one with a rethreader cause my nuts wouldn’t go back on so I went to ace hardware got a 5/16 24 count rethreader and rethreader holder and some 5/16 24 count locking nuts
I’ve never went through a pair of trucks. They’ve always either had the threads stripped and messed up beyond repair, or they’ve broken.
Interesting stuff!
I highkey like skating with crushed bushings
buying vs making a board please??
I’m no pro skater but I’ve skated the same trucks for 4-5 years
Recommend you buy a fish gear box, and when you buy new parts put your old parts in the box, is a lifesaver when you need it
Hey. I got an old board and trying to restore it. I realise that the nipple sitting in the pivot cup is worn out by 30%. The diameter is not only smaller, it is not round anymore. Is this even possible when there is a rubber pivot cup in place?
How to fix the broken baseplate, but my baseplate isn't too broke, just a lot of pieces near the pivot area, and that's very disturbing to take control the board,
I ride me trucks so tight a busted the bushings 🤣
Nice vid
What about small trucks?
I skated my first ever trucks for 1 year now and it’s only 25% Through 😂
Mine looked so fucked but idk if I absolutely need new ones
How to use tool Y ,plz
Use a mini sledge to get them kingpins out! If not your gonna have to channel your inner Thor 🤣! Thunders Hollow Lights 2s I bought looked like they had glue or loctite on it helping build the kingpin in?
"Channel your inner Thor" 😂🔨 Yeah, sometimes it's a pain to get that kingpin out! I've never seen loctite on them, but those splines make it much harder to get the kingpin out that it was 10 years ago when they didn't have them. 😄✌ - Tim
@@tacticsboardshop it wasn't red or blue it was clear / yellow. I instantly thought of super glue. I've never seen that before. Most of the time I can knock them out no problem but this time it was a FIGHT. I swap the original Kingpins for Krux dlks for more clearance. They fit alot of trucks as long a the baseplate is flat where the two meet. If the baseplate has a cylindrical canal it won't work. An old bowl skater gave me the idea when I watched his video on swapping kingpins for the old Grind King inverted kingpins.
My trucks are uneven how do I fix?
I think you are supposed to back up the die a little bit every turn or so.
Me and my son replace our trucks and wheels every month there’s always a new flavor 🔥🔥🔥
If people haven't tried Havoc trucks, I'd recommend them, affordable, light weight, can buy several pairs for under 100.00, slick and great for grinds or 50/50.
Might also want to skate Bullet trucks.
How much should a set of trucks worth?
What kingpins would you recommend for venture v-hollow low trucks?
Kreper downlow kingpins
145 thunder trucks do they it into 8 25?
trucks bullet works well with tricks of streets. grinds, gaps, etc etc?
Yes, Bullet trucks will work for whatever kind of skating you're wanting to do. 👍
@@tacticsboardshop durabillity?
@@alonsoundesign Since Bullet is more of a price point brand, their not going to be as strong as the major brands like Independent, Thunder, Ace, etc. But they are a decent truck that will serve you well as long as you're not skating in extreme situations. 👍 Cheers! - Tim
2:51 what wheels are those, they look sick
I think those are some really worn down Bones STF V3 wheels. 🛹🤔 - Tim
So I have a little bit of rust on my axle is that good or not and the trucks a fairly new
You're good! It's normal to have a tiny bit of dusty residual rust on the axle, even on brand new trucks. 👍
How do u measure the hardness of bushing because mine don’t say the hardness
I’m trying to get my truck top part with the axel off the baseplate but the kingpin nut is kind of inside the top busing and I can’t take the top part off because it’s stuck in the bushing it happened because I took the protecter cap off and now the nut won’t come off
You're going to need to use a different tool to loosen that sucker. Try using a visegrip to get a solid hold of the kingpin nut. Worst case scenario is you'll have to cut off pieces of your top bushing so you can get to the nut and then just replace the top bushing. I hope that helps! - Tim
My trucks were squeaky af so I sprayed wd40 in the pivot cup
Will ace trucks AF1s 77 fit a 9.4 deck? Or would the 77s be too big? Thanks!
The ACE AF1 77 have a 9.5 inch axle, so they'll work great for a 9.4 deck. 👍 - Tim
@@tacticsboardshop awesome thanks 👍👍👍
skating my pair of trucks 4 2 years now lol
mine broke i skated mine sinc decmber today
Hi hou are you i am riding a rippa bord and my tale is broken and i cant avord a royol bord if you have old wans let me no
get new trucks when it snaps, bends, or when the part of the truck that holds the wheels breaks
Mine was broken after 2 days🤷🏻♂️🤷🏻♂️
when should I get a new deck?
Do I need new wheels? For some of em the bearings just slip right out. You don’t have to pry em with the trucks. They just fall out. I don’t think that’s normal. Help pls
Are the wheels super old? There's not much you can do for a wheel if the bearing slot is all stretched out. 😕As long as it doesn't affect your skating and rides fine, you should be able to just skate the wheels anyway. But if they're causing your bearings to bust or make your wheels to fall off, then you should probably get some new wheels. Stay safe out there! - Tim
@@tacticsboardshop alright thanks for your help :) the wheels aren’t super old. It’s my first board and I bought a complete. The bearings that were included were really hard to pry out. Really really hard. And when I was prying em out, I dented the metal bearing shields and they don’t spin anymore. I replaced the bearings to reds. Most of the reds go in and out of the wheel like normal wheels but I think 2 of them just slip out. I can still ride it it’s just really really bumpy. Skating rough pavement is a big no for me cuz it feels like an earthquake in my legs.
@@thelambsaucee are the nuts on the axle quite loose??
Would Indy hollows 149 fit on a 8.8 deck? I’ve seen two different charts; 1 chart says yes the other chart says barely. Thank you!
Nah, the 149 has an 8.5 inch axle and it's gonna feel too small. You should go for the Indy 159 trucks (8.75 axle) 👍
@@tacticsboardshop thanks!!!
Why is it so hard to find replace baseplates for independent trucks? My hardware holes are stretched out too much. Also, I feel like you should have gone over how to prevent this because it can be pretty annoying when your skateboard keeps turning by itself due to this problem.
Tighten your hardware every session this is the determining factor for me and my thunders which are very prone to baseplate stretching prior to me tightening them and checking them all the time I got about a year before they got stretched. I’m current on my second + year on standard thunders and they are only still pretty good. I even had to buy the thunder rebuild kit to get new bushing which is a first for me, I usually just ride trucks till they are stretched and then move on one loose hardware actually makes a difference I dunno how kids purposely and willingly skate with 3 bolts I just retighten every nutt every session and if I’m doing a lot of tailslides or noseslides I’ll even check the mid session sometimes
dude my trucks broke after 2 years 😭😭 I broke then this morning while learning a 50-50
Does it matter if u have bad skateboard hardware cuz when I first brought my skateboard I decided to use wallmart skateboard hardware so I can save some money and my skateboard is really bad wheels are really slow and skateboard is uneven so m tryna figure the problem
My trucks pop when I lean, and I tried just Greasing them up I little bit and loosening the king pen a bit and it didn’t work. Do you have any tips on how to fix that?
What do you mean they pop when you lean? Is it just a sound, or is there a physical jolting flop? - Tim
he forgot to mention that you should wax the inside of the pivot cups if youre trucks is squeekin
MMA Inverter Welder - $99, welding auto mask - $30, Angle grinder - $10, Aluminium electrode - $3 piece.
i just need new trucks and bearings
There's a crack in my baseplate, I can't find any sushi baseplates, should I just super glue it back together
How big is the crack?
Hey I was wondering what I should do if I lose my speed washers for my bearings?
You don't necessarily need them, but they definitely help keep you speed a little better. If you're wanting some, you could go to your local skate shop and they'll probably just give you some for free. Or ask other skaters if they have any extra ones in a box of old parts. Or in the worst case scenario, you could just get some small thin washers from a hardware store. I hope you can track some down! - Tim
I have a problem with my skateboard and it’s probably because I built it and the problem is that on one truck one wheel touches the ground and the other one doesn’t and the same thing with my other truck and it’s not the bushings because their brand new so idk what to do if u have the answer pls let me know 😢
Have you checked to see if the deck is warped? Sometimes skateboard decks aren't perfectly straight and kind of twist very slightly and can make your board wobble like a stool with uneven legs. Look down the deck lengthwise and try to see if the deck slightly corkscrews. If it's slightly warped it wont affect your skating too much, but if it's really warped, it'll make everything feel a little off. If it's warped you should be able to return or exchange it because it's defective. Take care! - Tim
I just got brand new trucks how I know the front and the back? Is there a difrence
Trucks are identical when they are new, so if you want to be able to differentiate between them, you can put a mark on them or something like that. I usually just know which truck is my front/back from the grind marks on them. Often I'll have a pretty defined groove from doing crooked grinds, so I can always tell which one is the front. But if they're new, then it doesn't matter which one you put on the front/back. Cheers! - Tim
@@tacticsboardshop aight thanks dude