How to Remove Horn 07-13 Chevy Silverado
VloĆŸit
- Äas pĆidĂĄn 3. 12. 2018
- In the video, 1A Auto shows how to replace a broken horn. The video is applicable to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
đ§ List of tools used:
âą 10mm Socket 1aau.to/oZ4/1AXAA00017
âą 7mm Socket 1aau.to/oZ4/1AXAA00017
âą Trim Tool Set 1aau.to/oqs/1AXXX00004
âą Ratchet 1aau.to/oaqr/1AXAA00016
âą Socket Extensions 1aau.to/o9z/1AXAA00015
âą Rust Penetrant
For More Info visit us at 1aau.to/h/brg/
â DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravnĂ prostĆedky
â *Watch the Video*
â *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
â *Do it Yourself*
â *Save Money*
Big help
Could they put it in a dumber place ! My god !
Seeing all the rust on this truck makes me so appreciative for living in Texas!
No thanks, Iâll just install a stand-alone horn under the hood and itâs own button inside.That location is nuts!!
Thank you, sir, for creating this video. I watched it several months ago when I know I needed to repair my horn, but thought it too complicated for me being that I consider myself non-mechanical. I did it, though. Thanks again. January 7, 2019.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Bruce Robinson
Instead of just putting it behind the grill where you can reach under the bumper to get to it they make it where you gotta take 1/2 of the front clip of to get to it. Engineering degree needed.
They basically hung the horn by a string from the ceiling and then built the truck around it... lololol
@ 8:17, if the horn hadn't been working, now would be the time to test the horn before burying it again. Great video!
Removing the rusted bolts alone is an adventure! Cut the wires from the stupid rusted horns and add new horns in an auto-friendly approachable location. This is what happen when the GM engineers try to reinvent the wheel.
+Bader Rammal Thanks for checking us out!
07-13 Sierra.. just remove (2) 7mm bolts from wheel well, pull out bumper piece (just clips), 10mm horn bolt.. took me 5 minutes for both horns đđŒ
Thank you so much for this video You're a godsend
So how do I do this for a 1999 Silverado? I can't find it anywhere on CZcams. :(
I took a deep 10mm and extension in between the bumper. no need for the 7mm. You can literally see it.
+axis810 Thanks for the feedback!
Is the location the same on older (2006) body style. Can't find much info on my year.
Where can I buy does covers above the tire? Mines are tearing down
Well I know for a fact they'll never try to steal my horn
changing the water pump was easier than this.
The hell with that, to much work
Easier just to lay on the ground if there's no lift. No major parts removal at all. It's not necessarily this fricking complicated people. Thinking this is the way a shop does it for extra time charge on your bill.
So I can reach it from the bottom?
What if the horn is really faint do you suggest cleaning the connections on the button or does that mean the horn is out?
+Devin Brown Thanks for watching! You can certainly try that first to see if that helps, but they will usually need to be replaced at that point.
Is it the same process on an avalanche?
I just went through 5in of rain water the other day going fast and now my horn is only sounding halfway. Do you think the water stopped some connection and will it get better or will I need to replace the horn? It's a 2012 Silverado
Probably replaced....that's what I'm doing now because of road flooding. Horn sounds like it muffled.
How do you know is was 5 inches of rain? Did you get out and measure it? Lol. Just a joke. I'm sure you eyeballed it much like I did accept I then went through about 10" of flooded road and at 40 mph. Water shot up taller than the truck and my Truck has a 3 inch lift. Didn't notice till days later because who thinks to test the horn if you don't need it. I Did notice a difference when locking the doors with the remote, the horn sound muffled and faint.
Hello my horn completely died and does this work for a 03 yukon??
+Tia Bullock This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
đŻđŻđŻđ
Good Ole rust belt truck đ
Doesnât these vehicles have 2 horn locations? High and low
Whats the replacement part number for this horn?
+Alexis Coronado Thanks for checking us out. We do not carry the horn shown in this video.
the horn model is a fiamm am80s
What's the SKU for the horn.
+@HEATH3NRacing Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You guys need to get more detailed on most of your videos. For example for this .. there's 2 horns high and low, you don't specify which one is this one.
+Whisper Garcia Thanks for the tip! We'll pass this info along to our production team.
Which horn is depicted on the video? And where is the other horn?
@@VictorMarines06 same place on passenger side
And o believe the one in the video is the hightone
Now I get it. I went through some flood waters at around 40 mph couple of days later my horn is high pitch and weird sounding. I ordered a new horn on Amazon but I'm stalling because of all the labor to change the stupid horn. Since you just let me know there's 2 horns, now it makes since. My low tone horn must have gone out and the High tone is still working. I was almost gonna replace the weird high tone sounding horn thinking it was a single horn and bad but I know now to replace the other horn since it's the one making no sound at all. đđŸđđŸ
I seen the last rusty truck come out of a salt mine
dang man i know this video is kinda old but there are some more recent comments, im wondering if anyone here has tried reusing both ends of the pigtail on another horn. im a little lazy and want to make this harder for myself haha.
Why put used horn back in?
+fred siddall We are just showing the removal and install process.
Mine doesnât have a plug its connected by two wires but the horn I bought has a female plug ???
just put some male connectors on the two wires and connect them. horns donât usually have polarity so it shouldnât matter whether the wire is hot or ground.
2010 gmc sierra can be removed and replaced in less than 5 minutes. Size up your job.
Guess I won't have a horn. No way I'm doing this.
All that for a horn? What idiot designed that?
So in other words. Take the 3/4 of the front end off just to reach a stupid Horn. How Genius of them. A 10 yo old could've designed this better. I would've bet it all that this thing was behind the front Grille and reachable without removing the Grille. I see now I would've lost it all messing with GM. Not that I can't do it, I feel like why should I even have too spend my Sunday tearing apart the front end to replace a horn? So for now, the top cover and clips go back on and I'll save this job for a day when it's not cold and I've had time to forgive GM for this idiotic decision on the horns location. Good day truck owners.
Shouldâve just put a new horn since all that work was done. That horn looked all rusty lol
Why doesn't the audio work on this video?
+Benjamin M The audio is working when I pull up the video. Your settings may need to be adjusted. Thanks for watching.
@@1AAuto Audio on other videos work. It isn't my settings. I'm not quite sure why but it happens on some videos. :/
Chevy is Piece of junk I change the horn of my Toyota Matrix with in 5 minutes
But you still ended up with a toyota matrix...