EP 06 || Modification To Upper Aluminium Tailgate | Range Rover Classic
Vložit
- čas přidán 2. 01. 2022
- With the upper tailgate rusting out, i thought whilst i'm going to the effort of doing everything else properly the first time, why not do the same and replace the upper tailgate with an aluminium frame and modify the lifting of the tailgate so that it pulls in on close (eradicating the classic lifting tailgate experienced by most range rover owners).
After all, with a galvanised chassis, galvanised shell and aluminium panels, the car is virtually rust proof.
Your attention to detail is spot on you really are kicking goals mate. I also like this new format with a focus on the finer details - keep it up!
Thank you Sir🙌🏾
Good to have another video from you.
Like the voice-over explaining what’s going on.
Thanks Andrew! I’ll try to do more of that overall in all the videos!
Love your vids man. Keep it up!
Cheers Josh!
Awesome. Great attention to the fine details.
Thanks mate! If your going to do it right, you might aswell do it properly!
Brilliant work, Thanks for sharing your journey!
No problem - Glad your enjoying it mate!
Yassss looking great mane!
Cheers Bawse🙌🏾
Love it - champion!
Cheers Travis!
Also that slide in intro was fire 🔥
Ahahahah cheers boss🙌🏾
New aftermarket locks on the side are absolutely sheit quality. I reused the original ones. And the rail for stopping the whiper was never on the original frame.
Hey mate, nothing is rarely as good as OEM but they seem to work fine for me!. in regards to the rail, there's a channel that stops the whippers from going up past a certain point on my old frame! so i assume that's factory.
Yes totally - two thumbs up for the nitty gritty!
Great vide mate. I've been following you on FB and insta. Well done!
Thank you sir🙌🏾
Really good vid mate.
Thanks Chris, appreciate it mate
Nice job! I did this on my 1985 RRC a few months ago. I wish I had seen the video before. :D Greetings from Germany keep it up!
Atleast you’ve done it now, definitely a great mod to these vehicles👌🏾
Excellent video. Thanks for posting. I cannot wait to swap my RRC upper gas struts like that.
No drammas mate!
Man, that is a fancy pivot gun.
Great bud! Thanks
Great video bro, I need the old frame to rebuild for my classic.
It was the slide for me. 😍
Thanks Tig wigs 🙌🏾
Keep it up
Many thanks for this detailed video!! I just ordered a frame from Famous Four - they were speedy to respond to questions and shipping overseas was quick! Although I haven't started, I had a thought while watching you remove the old frame. On my old sailboat I used a product called "Debond Marine Formula" which proved itself invaluable in removing some of the toughest 3M materials ever! Spraying this on the old frame may help alleviate the difficulty in removing it from the glass.
Great Tip! Thanks for the heads up Don! I’ll try it out on the next project 👌🏾
Brilliant
Thanks mate, glad you enjoyed it!
Great vid! i’ve never seen the relocation mod you did. It’s a great idea. I will do it to mine i think as it’s horrible to close.
Such a great mod! Wish I did it ages ago!
@@endakhudson i will rebuild my tailgate next week (finally)! Which struts did you use, they are not the factory ones if I understand correctly ?
@@hade-mw7zq struts i actually picked up from Bunnings, cheap and actually well built. i downgraded the struts to 200N from 250N as the frame is now a lot lighter being Aluminium.
Where did you get the aluminium tailgate assy? Great work.
From the UK, online store is called Famous Four!
Spot on mate..I need to replace mine it's totally rusted off the glass!
Fantastic video and instructions, thank you. My rear floor panel is rusted and you can see air in places which used to be a cross member beam. How did you remove the rear floor panel so nicely on your green RRC? Cheers - Dave Oz
Excellent job! Did you reuse the old handle/key or new handle re-keyed? Subscribed
Thanks Robert! I reused the old handle and key & glass. Everything else I replaced
Great Video!
I only have one question, Why didn't you filled the glass slot with the silicon to avoid water ingress? Seems to me that that amount of silicon is prone to water ingress if a little crack on the silicon happens. Not a big issue with aluminium, but deadly on steel.
Cheers and keep it going!
Think you answered your question there. It’s aluminium, so no need. If you silicon it right and maintain it over the years you shouldn’t have any problem. Pump silicon for the sake of filling the void seems very pointless to me, if you end up get water in there you just end up trapping it
Hey nice video and great work! Thanks for sharing! I just want to replace my glass is it really complicated or pretty simple. I have the glass in a rusted out one.
Much appreciated mate. Nope, pretty straight forward job!
Looks mint. Are you spraying Windex onto Sikaflex to allow you to shape it with no mess?
Yeap that’s it mate 👍🏾
@@endakhudson thanks I saw someone else.do it but had no idea what they were spraying on it so didn't want to screw anything up.
@@007Yoghurt thanks mate, that is exactly what I wanted to know
Great video thank you, Can you please let me know where the aliminium kit was purchased
G’day Tony, thanks mate, Glad you enjoyed! I got the kit from Famous Four over in the UK
@@endakhudson Ok thanks for the info, i have to replace mine, was there anything else that you recomend to get at the same time for replacing the frame. Im restoring a 93 Vogue SE. Finding it difficult sourcing parts in Australia.
Hey there - Great video - I know you said the lower liftgate seal was in transit. When you installed did you have to use additional silicone or sikaflex? I have a new seal & new channel from Famous Four but I'm unsure if I should be adding Sikaflex as well? Cheers from SoCal, USA!
I did end up using a bit of black Silicon on the corners to pull it up, but not a great deal.
Hi there, maybe could you please tell me where i can buy the 1995 land rover country classic, rear tailgate set frame. thank you.
Super bro do you still get them part.i need door lock both left and right any help...I can't find any parts here in Kenya 🇰🇪🤕
All off various LR website mate just need to search around for what’s available unfortunately
@@endakhudson sometimes we just have to make it weld it grind it drill it
Good job. ( 14:59) Why is the direction of the hydraulic arm on the upper tailgate upside down? Hydraulic reservoir must be up...
Hey Adel, rushed mistake. Swapped it not long after to ensure the seals are lubricated
Thanks for your reply. Everything is perfect.
I'm looking forward to the result👍
where to buy this set?
i got the kit from Famous Four in the UK