1988 CRX Si Restore Part 37 - SEM Trim Black
Vložit
- čas přidán 12. 03. 2023
- Step-by-step working toward getting this CRX back on the road.
SEM Trim Black Paint: amzn.to/3JD1i15
Master Paint System Disposable Cups: amzn.to/3GnPywF
Rust-Oleum Adhesion Promotor: amzn.to/3Ftd62I
Abrasive Nylon Wheel: amzn.to/3wYjzPU
Front Brake Rotors: amzn.to/3xK2wlq
Front Wheel Hubs: amzn.to/36zGUwX
Trailing Arm Bushings: amzn.to/3MkZ193
M12x1.25 Thread Repair Kit: amzn.to/3CtC8wM
Zinc-coated hose clamps: amzn.to/3viTXwC
Harness zip-clips: amzn.to/354IcPN
Bolt Buster Induction Tool: amzn.to/34EEn37
Rust Reformer Primer: amzn.to/3L8cIsp
VHT Chassis Paint: amzn.to/3goBYwm
Nylon Abrasive Brushes: amzn.to/3rulZ64
Yellow 3M Masking Tape: amzn.to/3Lgm8lu
Masking Paper: amzn.to/3soB608
Wax & Tar Remover: amzn.to/3soKIYG
If you'd like to get some merch and support the builds you see on the channel, check out my store at: www.etsy.com/shop/CRXseth
Instagram: @crxseth /
Amazon: www.amazon.com/shop/crxseth - Auta a dopravní prostředky
Man, I know you are a little disappointed, but honestly, looks amazing! Your attention to detail is astonishing. You rock, my friend!
Thanks for the continued support and encouragement. I’m looking forward to getting past the painting portion since it’s taking so long. Once I start bolting on these panels, it’s going to be a game-changer.
Thanks, Seth! Looks great!
Man you are an absolute hero. Love getting the notification for a new episode. As bad as it sounds, I wish this series wouldn't end! Unbelievable work.
Mate, it’s so enjoyable to watch this journey play out. True dedication to an amazing car! Can’t wait to see the finished product mate!
That's why I enjoy this channel, his attention to detail is insane. Thanks for the content Seth.
Thanks!
I really like the gloss/satin next to each other looks great
Love that stuff!! Been using it on all my trim for the last 5 years!
Tamiya yellow tape reels are great for the curves, good quality and come in 3mm, 6mm and 10mm rolls
Hey mate. When I did this same job on my CRX, I bought some super slim masking tape 5mm w stuff to mask those curves. Then used the wider stuff. Worked wonders.
You're perfecting your craft. Progress man!
Looking really nice seth. The 3 little spots doesnt matter. It looks awesome. Nice job ✌🏻🇳🇱
Yet another great video Seth👏👏
Good job! I like this style.
So sick! Love SEM, bummer about about those 3 spots, still looks killer!
Looks amazing, highly suggest some PPF for atleast the front end when this is all done
another banger!!
I wish I had a 100th of your painting skills 😅
Hah! I’m a noob that’s just doing what I can.
Fire!!!!!
Beautiful as usual !
Can you tell me Seth, how many spray paints were needed to do the 3 coats of the two bumpers ?
And in sanding before painting,what grain do you get on these plastics ?
Two cans. I sanded with 600, but went over it with some red scuff pad because this paint likes a rougher base layer.
When it comes to any kind of tape, it's 3M or nothing. My father worked at 3M for 30 years.
I believe that. I threw away the off brand. I should have known better.
Be happy when weather betterr here so in can get on with bodywork repairs on my 1.5x JDM, need to watch more Spraying Videos to get better so reduce Orange Peel. Engine swap this summer from Dual Carb to Del Sol D15B Vtec, should be awesome then
What paint formula did you use for this ? I was interested in doing some oil base paint like rustlers with some hardener ? I’ve never in my life painted a car but your paint came out very smooth. I’m looking for an economical option with some nice results.
Just a Nason brand basecoat clear coat or the original color.
This is great. I love this build. Its an 89 correct guys?
It is a 1988. Pillar mounted seat belts.
🔥🔥🔥🔥
Did you use primer before spraying the SEM black trim?
On these bumpers, yes.
the gun dessicant works but it fills up fast and has to be changed. dont throw it away it can be re used by drying in an oven. if left wet in the filter it can corrode the filter
looks fckn insane!
Hey Seth I just painted my car about a day ago how long should I wait to tape of my bumper
Definitely give it a few days. Bare minimum 24 hours.
Looks great! I used that same SEM trim paint on my civics door trim and it came out looking fantastic!
I used to just use the Duplicolor trim and bumper paint, but this is even better than that.
Which paint did you used for the gloss section of the bumper?
Same as the rest of the car.
almost 30k subz
So close!!!
@@crxseth yes buddy !
Love the build. Is there any updates on the CivicSeth civic love the content either way
Not yet. I am focusing on this CRX before I do anything to that car. I don’t want to end up with unfinished projects. It’s a slippery slope.
@@crxseth i completely agree I’ll watch both restorations come back to life love what your doing man
Looking awesome though, the trim paint looks brilliant for cans, Its very Frustrating, definitely pays to buy a well known brand you know can be trusted and pay a little extra, recently painted my partners bumper, Blue to Yellow, it has a black plastic protector that was Suzuki Accessory at top which i wanted to keep, masking off in poor light, i went over edge of it in few tiny areas so can see some blue.
If you could do it again would you have just painted the whole bumper black and then lay on the trim paint?
No, but I would have used a high quality name brand masking tape for the fine line tape. When I redid it, I used 3M and it did great.
@crxseth I tried it your way but I did the sem trim 1st. Now when I go to tape it up if I adjust my tape the sem peels off. At least for me the sem should be easier to repair I hope. BTW what blender brand did you use. Also do you have a tape recommendation for the trim so it doesn't pull it off. I'm doing the front bumper now. The rear bumper was the one that had peel
@@dajahvue It shouldn’t have peeled it off. Always use 3M tape. How long did you wait after painting to tape it? Did you prep it properly?
@@dajahvue I used SprayMax blender that you can buy in a spray can.
@crxseth that stuff is good I just blended the A pillar and you couldn't even tell
any reason not to use a black primer?
Only downside that I can think of is not being able to see how well your paint covered.
That's a shame. Based on its placement and it's black, I'd touch in the base, wetsand, then touch in some clear, then sand an polish just the area. If your going to mask and repaint, it'll be a nightmare to get it bang on the trim paint edge.
I think I’m going to do that whole section and mask it up to the trim paint. I think it will be fine and have a better result than touching it up. I’ll probably do some clear blending just under the bumper light to avoid respraying the entire bumper.
@@crxseth yeah that sounds like a good compromise.
I want to see more of the silver Honda Civic coupe not those ugly hatch Honda’s your working on right now
The name of this channel is CRXSeth - Not CivicSeth!
Yes but those crx hondas are ugly ass hell
@@darray7472 What’s funny is my original screen name is civicseth.
Oh nos😨!
We are here for the CRXs.
You need the blue fine line tape.
Expecting delivery of it today!
Do you ever use frog tape?
I’ve never heard of it. Is that a brand?