1988 CRX Si Restore Part 44 - European Interior
Vložit
- čas přidán 17. 06. 2023
- Step-by-step working toward getting this CRX back on the road.
Adhesion Promoter: amzn.to/448uggO
SEM Color Coat: amzn.to/3pdEgX9
Dash Gasket: amzn.to/3CWx05m
Genuine Honda 08F03-SHJ-1100D Molding: amzn.to/3OQRYK1
Restotuner Bolts & more: www.restotuner.com/honda
Butyl Adhesive: amzn.to/3MFMqPR
Vapor Barrier Plastic: amzn.to/3OHt8Mn
Golden Era Parts Seals & more: www.goldeneraparts.com
SEM Trim Black: amzn.to/3MthfXG
Windshield molding: www.ebay.com/itm/313178712809
Rear Quarter Glass Moldings: www.ebay.com/itm/283842929266
In-Line Water Desiccant: amzn.to/3p294cI
Master Paint System Disposable Cups: amzn.to/3GnPywF
Rust-Oleum Adhesion Promotor: amzn.to/3Ftd62I
Abrasive Nylon Wheel: amzn.to/3wYjzPU
Front Brake Rotors: amzn.to/3xK2wlq
Front Wheel Hubs: amzn.to/36zGUwX
Trailing Arm Bushings: amzn.to/3MkZ193
M12x1.25 Thread Repair Kit: amzn.to/3CtC8wM
Zinc-coated hose clamps: amzn.to/3viTXwC
Harness zip-clips: amzn.to/354IcPN
Bolt Buster Induction Tool: amzn.to/34EEn37
Rust Reformer Primer: amzn.to/3L8cIsp
VHT Chassis Paint: amzn.to/3goBYwm
Nylon Abrasive Brushes: amzn.to/3rulZ64
Yellow 3M Masking Tape: amzn.to/3Lgm8lu
Masking Paper: amzn.to/3soB608
Wax & Tar Remover: amzn.to/3soKIYG
Coupon code: CRXSETH for discount!
Maxpeedingrods T7 Coilovers:
www.maxpeedingrods.com/produc...
If you'd like to get some merch and support the builds you see on the channel, check out my store at: www.etsy.com/shop/CRXseth
Instagram: @crxseth /
Amazon: www.amazon.com/shop/crxseth - Auta a dopravní prostředky
You must be the incarnation of Houdini because this transformation is magical!
Haha!
Let's Go Jimmy Dale, one time for the one time!
That rivet gun on the vin plate was super satisfying.
Glad to see someone else using SEM instead of Duplicolor. 😁
Looks amazing! Everything you are doing looks outstanding!
Thanks so much!
13:56 Watching that speedomer console go in reminded me how I used to live on redline in my '85 Si. Used to wring the piss out of it as a 16 y/o car enthusiast. It was a lot better to me, than I was to it. I sold it with 110,000 miles, running perfeclty, and the only thing that failed on me was the alternator. Wasn't even burning any oil.
Absolutely outstanding work.
Great 👍 job man Looks beautiful
That is looking insane. I live in Portugal and we have a few cool CRXs but i think this one is the best i ever seen... Wow... Great Work Mate.❤
Wow, thank you!
Man that interior's clean. Especially the dash. The entire time you were prepping it I was saying to myself "don't flock it" 🤣 Should've trusted you better. A+ job
Looks good seth
Looking good Seth
Thank you.
Looks awesome bro
It would be nice if you could also like the video alongside your love-filled comments, folks !!!
Thanks!
It's a thing of beauty. Wish I could find a SIR crx one day and restore it to this high standard.
The way it looks now is incredible.
Love those crank handles ❤
Great video! You only missed trim painting the glove compartment release latch😂
I may go ahead and do that since it is quite faded. Just a couple screws for that one.
This car has come along way, excellent work Seth!
Thank you! Super happy with how it’s turning out.
Another home run buddy 🔥💪🤙 the door panels look sick!! Love the way they look.
Thank you!
Loving the progress so far!
Thanks!
Your work is amazing with this car, keep both of it 😊, I am watching your chanel from Hungary.
Thanks for watching!
looks awesome
Love the videos
Looking mint! Glad you didn’t flock the dash.
You are a CRX wizard.
looking so sweet
Crx Seth your a perfectionest, enjoy all your content just takes me back to my youth wen I used to own a crx been looking n looking for one no luck here in Tucson
Thanks 👍
Man this was sooooooo good. ❤😊
Looks great!
Thanks!
Incredible work as usual Seth. I did half expect you to have flocked the dash in this video though 😆
Don’t think I didn’t seriously consider it.
cant wait for PART 50
Can’t wait to be done!
This CRX is going to end up in some museum or big collector garage.
All because Seth wanted the hood from it. 😂
Hahaha. That’s so funny that you remember that’s why I bought the car.
Amazing as always, the dash looks amazing, takes me back to car sharing at work with someone who had a black 91 SiR
Good thing you didn’t flock it because mine wasn’t all even out .! .. it’s all weird now but the reason why people flock it is the dang sun glare..
Yeah, pros and cons of each.
If I'm not mistaken it's not necessary to remove the vent to unplug the clock while removing the dash. Can be done from behind but I think doesn't need unplugged.
You’re right. If you leave the dash harness on the dash, you don’t have to mess with the clock.
@@crxseth I was just thinking to avoid cracking the vent as some are really fragile.
@@TheJohnnyef9 I broke one trying to remove it, so I agree. Leave it in place.
Hey that felt could be a good way to fix ef door card's. Well the hatchback and crx
Hi Seth,
don't you have on the USDM models, the hard rear HP plastics intended to stiffen the rear linings?
On my dashboard, I disassembled the metal structure to sand it and varnish it with Rustol (owatrol).
I’m not aware of any additional plastics in the rear.
You are doing an amazing job. In the last video when you removed the sound deadening from the floor pan you didn't apply new sound deadening pads, are you leaving it out or reapplying later?
Leaving it out.
Are all the rear pieces new? I have the blue interior and they are sun faded. I also have a small crack in th dash.
No, the rear pieces were repainted.
Can you tell me what you're using for the rubber seals you put around the hvac vents under the dash? Mine have completely disintegrated on my EG Hatch and I haven't come across a good solution until I saw this video. Thanks!
Basically this:
amzn.to/3CWx05m
@@crxseth Hey whatever works! Thanks!
That Dash was immaculate!!! Looks Great!!! How much are you selling it for if you sell it?
I’m not sure of a price yet. I’ve had several good offers.
Such a great inspiration. Sadly I have a dash with the top felt part which has sun burnt patches...any options to fix this ? Much appreciated
You could probably re-flock it, but I would almost sand it all down and do what I did with the vinyl paint.
@@crxseth thanks heaps
So nice!
How old is CRX Seth?
I'm just curious: what ballpark price would crxseth sell something like this for? Thinking around 12-15k?
That sounds somewhat reasonable to me. I’ll have to check out the spending and see how the market is once it’s done.
Did you use the SEM gloss or satin?
Landau Black. Link is in the video description.
Hi. I enjoy watching all the progress. I'm a long-time viewer and very interested buyer. My husband met you at the tail of the dragon event a couple of years back. We want to buy it. Just name your price!
Oh wow! Can you reach out on Instagram? Same screen name.
Or you can email me at CRXseth at gmail dot com.
@@crxseth I sent you an email! Thank you for reaching back out.
So were you the lucky buyer? If so, I'm hoping it's as satisfying as I imagine!
@@kings17court WE WISH! We were so bummed out when he announced he sold it! I'm really happy for whoever got lucky enough to buy it. ☺️
👍🏼
Man my 88crxsi needs the SETH touch.
Sell it to me. ;)
@@crxseth i couldn't sell it.I've had my crx since 1998 and I drove it until 2008 and its just been sitting for 15yrs😔 in the carport. Its out of the sun and no rain touches it. One day ill get it back on the road again.
@@crxseth say if you had a price on doing a restore on a crx I would pay you the cash to do my crx. And that would be some good content, restoring a subscribers crx...... And keep up the awesome work.
So the dash looks fantastic, but was there a reason for not flocking it?
I’ve seen people have issues with evenness with flocking, and I didn’t want to chance it not turning out as nice as a uniform finish. I bought a flocking kit, but never felt good about that option.
makes perfect sense, looks great the way you did it! keep it up man
Not a fan of fully flocked dashboards, but flocking the upper trim to match the door-cards would have made sense.
I've just filled some cracks in the polypropylene dash structural plastic (top demist area) of my EG with superglue & sodium bicarbonate. Can be sanded afterward but hard not to loose texture.
Hey Seth sure youve been asked but what year CRX do you think is best and why?
I like the 1988 since it’s lighter, and doesn’t have the door mounted seat belts in the USA. It just needs some brake upgrades since they were a bit undersized.
Looking great. 👍🏾
Do you have a buyer.? And do know how much you’re going to be asking for it.?
I don’t have a buyer, but I have several people that have expressed interest. I do not know a price yet. I have to tally up the time and expenses first.
At least 10/15k this this is basically going to be brand new from the Seth factory
@@crxseth 👍🏾 it’d be cool to see who ends up with it.
What is the base coat for dashboard you used
Link is in the video description.
are you using that 90-91 cluster sub harness??? $$$
No plans to do so. I might throw some stuff on Facebook or eBay to sell before I scrap the green CRX.
what did you use to paint the dash again?
SEM color coat, greatest interior paint of all time
Link is in the video description.
Hell yeah first
Lets GOOOOOOOO
Hi Seth, could you provide a email so I can contact you? Thanks
CRXseth at gmail dot com.