BMW E30 Turbo Install (drift car)
Vložit
- čas přidán 25. 08. 2024
- Hey everyone that watches my channel and my videos. Leave me a comment down below and let me know if u liked this video or not. hopefully u all enjoyed this video.
My Instagram
pdx_ashton:
/ pdx_ashton
Music by
John Kenza - Wicked:
/ kadenza-hitti
Nothing like running a turbo with no oil feed line smh
Jovani Valle Read my New comment I put on the video
spools up quicker do....
Next week running engine with no oil
Thats why They "blow up"
Well done man. I didn't know anything about cars before deciding to do an engine swap + turbo on my e30. I was in WAAAY over my head but I went from not knowing where the coolant goes, to a fairly competent DIY mechanic. Should be a cool project and i'm sure it will teach you a ton and give you lots of pride to drive it.
Put a link for the kit !
i have an e30 myself, where did you get the turbo kit?!
Dude putting work with a cardboard matt. Love it
Amazing, I have a 1986 325e and I am having hard time to locate the relay for injectors!
Holy shit he started it up with no oil supply ya'll! hahahahahahaha
Hey. Im a new subscriber from Latvia. I just saw my first video of yours and i think you may be a big yt star one day. You should get oil and intercooler and then run it. Hope turbo will last very long and good day.
Apple yummy thanks man
Found the video I was looking for .
Just watched all your videos. Super stoked for the turbo build man. Keep up the good work!!
Damon Marrazzo thanks man stay tuned for the next video.😁
Not seeing any links for the kit you used and haven't found a follow up video of it finished either.
bmw and stutututu. left a sub
acelerate with cold start will damage motor (diesel and no diesel) and turbo , thats why they blow. And turn off the car is the same. Cold start needs the oil to enter the circuit (2m + - ) ...and Before turn off you will need to use the rest of the oil in the circuit (2m is enough)
Come on man it's been 6 months what happen to a video each week?! We gotta see what the car can do now
Subscribed can't wait till you get more progress on the turbo
J Rod siiiick thank my dude
I have an 89 e34 2.5 manual thinking on the same set up um the kit is for all who doesn't know you have to buy Ebay universal hoses and just a turbo manifold and a t3 turbo do it your self basically the e30 turbo kit
sweet ride i love em m20s boosted
Good luck!
I am also doing the same, not a drift but daily car tho...
Boosting m20b20... Doing everything myself, did even manifold adapter for turbo, so i know what what you are doing and how hard it can be... it is never just "plug and play " :)
Subscribed...
Tomo Reso haha I completely agree and hopefully your car build it goes to plan👌
Did you do it yet?
Hey bro hows it am from Africa wana do an M10 turbo now my question is since the M10 doesnt have the oil plug that goes to the turbo like other cars do, whats the solution is it safe to leave it out.... How will the turbo lubricate.... And one more question the engine is carburated will it still work. Thanks in advance
That looks sick ... I like this kind of videos...so new sub
BMW is very nice bro'!! I'm from Bosnia
✌ E30
Man !! You’re amazing.
I'm looking forward to more videos
You're awsome keep at it kid
Nice car dude
Ashn Legacy thanks man
Nice! Still got it?
I have m40 316i ican put mannyfold and tourbo only??
Pls informe thanks from greece
please keep going on this e30 im so intrested 😂😁😁😁😁
felix reinaldo no problem man look forward for the next video man.👌
turbo update video?
looks good bro, what's the power ya got out of it?
Were. Can l find the kit?
What kit is this fam? Or did you piece it together?
Godman it that fucking music again
Is that 318i ???
What kit did you get? What injectors are you going with
Aye man it looks good cant say alot from Ebay turbos but looks good. Fuck everyone else man do you
I need to turbo my 95 Toyota Celica GT . Where can I get a turbo kit ? Need advice, thanks
Subscriber from Sweden
Nice
hello, is the brain and flowmeter required for turbo?
Yes 🙌🙌🙌🙌
nice video man!
Did you use the original injection? Is the engine stock?
Cool videos man, are you going to eventually convert it to a manual transmission?
What in the wheel stop?
what is the size of the turbo?
where did you get the turbo?
Where did you bough your kit?
Any idea what caused that dent in the drivers front fender? I have almost the same dent on my 86' 325es but a few inches forward on the same fender lol. Cool videos
vtecjosh haha wow. Thanks man
where did you get your turbo?
U stopped uploading
What kind of turbo is it?
Nice. How many hp does it have now?
i didn't see intercooler ..hmm
what turbo did u use ?
Can you lmk what kit you got?
good job ✌😎
Update us with the E30
Subed with notifications ;)
No intercooler?
link for that front bumper?
Please can you leave a link for this kit
What year and model is this e30?
Turbo bearings damaged!!! Try giving it oil before starting it!!
Good video only problem get your haircut please
if you dont want to buy garret go and rebalance turbo befor starting the car, it will help a lot, "dont belive what chineez write ebay/alliexpress"
Artūrs .Romanovskis thanks man I'll look into getting that done.😁
YO ANY UPDATES?
Building my own turbo e30 currently. Just thought it'd give you a pointer. DON'T forget to replace the fpr (fuel pressure regulator) before actually making boost. The stock reg can't keep up even with low boost
That1guy ? Thanks man I’ll make sure to replace it
U know what fuck all of u that keep saying shit about no oil Being fed to the turbo if you paid attention and listen to me talk in the video I said I was going to prime the turbo with some oil before I started it and that’s what I did also I said I would include another clip in the video and that other clip I added was after I had oil lines already ran so the turbo is 100% FUCKING FINE so shut up already and I don’t t care if I piss off anyone that has said anything about the turbo and it not getting oil it not my fault that u people can’t Pay attention and listen
bimmer auto
The turbo may seem fine but you could have added alot of wear to it, you can't "prime" a turbo with som oil, it needs constant pressure and flow.
ZeroPie HD Dude I honestly don’t care about this turbo I even said that in the video as well it’s a Crappy journal bearing turbo anyway that’s why I said I’ll get a Garrett turbo in the future
There's nothing really "crappy" about a journal bearing, most cheap turbos are journal bearing and they work really well. What are you going to win using a ball bearing Garrett turbo on this engine? Have you even done anything to the bottom end? The only thing you will get out of a ball bearing turbo is faster spool and a larger hole in your wallet.
Hey nice video
Do you have a link for the kit?
Update video?
ECU ?
Can't understand why guys can't remove those leaves😂😒
Watching to see how the ebay turbo kit does. What's the turbo? T3/T4 internal wastegate?
Sorry, see the turbo in the vid now...
Pat Johnston sweet thanks man and yes that’s what the turbo is.
Cool, looking forward to your next vid Man. Do you plan on ditching the A/C stuff and relocating your oil filter? Plans for engine management?
Pat Johnston stay tuned for the next video it will answer your your first questions and oil filter didn’t need to be moved. And I’m not going to be running a tune on it just manual adjustments.
I saw in your video that the oil filter fits the way it is. Most guys talk about moving it. Maybe because of heat. Obviously cheapest and least work to leave it there if the header doesn't hit it. Looking forward to the next vid! Cheers!
I have a cool project for you. Get rid of that Justin Bieber hairdo.
Greetings from indonesia
I'm curious to see how long that turbo is going to last...
Noah Sharif ya me too Read the comment I added to the video today
Probably not very long since it most likely developed shaft play the minute he started it up with no oil feed.
How much HP
Hop up underneath the car. Lol
Hi, what displacement is the engine? 2.5L?
Mike.25 sorry this is a late response, but yes. That should be the m20b25 engine.
poor e30 ... and start a turbo whithout oil (facepalm)
Ace Andy hope it blows up on him and he crashes it while ”drifting”
how are u getting more gas into engine?
He's not. The turbo is just hooked to the exhaust at the time of the video with no down pipe and no intake piping.
where did you buy the kit from?
Josue Garcia eBay
You got a new subscriber
Facts
oil ? :D
Co za bez muzg... Odpalił bez podłączonego smarowania turbo hahaha
this is not a good tutorial if your trying to turbo your car. if u want more life in your car dont do things like he did
We need more bmw videos I’m tired of hondas
Ramen Tony thanks man And I’ve been thinking about starting up the CZcams channel again stay tuned
Did u actually start the turbo with no oil. Hahaha u can say bye bye to the turbo
Albert Mkhitaryan I’m going to say this read the comment I just added to this video
Dude, fix that paint job and dent on the front-left side... I have no idea how this does not bother you
This is so weird my name is Ashton and I’m also a car guy
csu csu noises
Link fon eBay ....
justim berber
coil heat shield unnecessary?
Nice!!
omg
Really? I'm no expert, but no oil in the turbo while running it??? Oh dear....
motomx69 Sorry man but I’ve told multiple people that I didn’t run the car with no oil in the turbo. I specifically said in the video that I was going to prime the turbo with oil to do a test start and that I would put a clip from my phone because I finished the oil system and had footage of it running with oil. Trust me I know how all this stuff works if I didn’t I wouldn’t have even started or bought this car. Plus the turbo that’s in the car right now is a shitty journal bearing turbo from eBay
Ashton Hanson @5:42 I don’t see any oil feed lines lol
Ashton Hanson you can’t just prime the turbo with oil and then start it up, doesn’t work like that. I’ve been rebuilding turbos for over a year now and I’ve seen worn shafts from one dry start up.