TURBO ROTARY MINIBIKE First Drive! | Ep. 4
Vložit
- čas přidán 20. 08. 2024
- RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
If you would like to get a turbo of your own as well as helping our channel, use the link above!
This is episode 4 of the Turbo Rotary Minibike, where we took it out for the first test drive with the turbo! We changed the gearing to give it more torque but went a little too high, so we need to re-regear it. It sounds absolutely insane when driving and it seemed to be doing well and making boost! Next up is going full send and getting up to some higher speeds to see what it’s capable of!
Thank y’all for watching, stay safe, and be sure to stay tuned for the next episode, the FIRST DRIVE!
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/...
--------------TOOLS------------
RogueFab Tubing Notcher
www.roguefab.c...
Pro-tools Tubing Bender
pro-tools.com/...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com...
Optrel Grinding Mask
usa.optrel.com...
---------MUSIC --------
Music - Background and Montage Music Is From Endemic Sounds
www.epidemicso...
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
-----PARTS-----
RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
Pulse Pump- www.gopowerspo...
Seat - www.gopowerspo...
Chrome Shocks - www.gopowerspo...
Chrome Wheel - www.gopowerspo...
Inner Tubes- www.gopowerspo...
Tires - www.gopowerspo...
Gold Chain - www.gopowerspo...
Fenders - www.gopowerspo...
¾ Lock Collar - www.gopowerspo...
Brake Band- www.gopowerspo...
Brake Band Pin- www.gopowerspo...
Brake Cable and Lever- www.gopowerspo...
Jack Shaft Sprockets - www.gopowerspo...
Jack Shaft Lock Collars- www.gopowerspo...
Jack Shaft (10 inch with lock nuts and key) - www.gopowerspo...
Grips and Throttle - www.gopowerspo...
Clutch - www.gopowerspo...
RLV Muffler - www.gopowerspo...
Weld On Tabs - Amazon affiliate link: amzn.to/2XOoIIv
That thing is sick! I wonder if a juggernaut would fit up 🤔
Better yet, another turbo
Vasily you need to stop watching yt and finish the damn mower cmon man where is it at?
Lol
Two of my fav powersports fabricators
No vastly builds can can watch yt like all us
Get a torque converter with medium/high gearing to fix that low rpm flat spot, and to give higher top speed, you could run premix, probably only 50/1 if you’re on pump gas right now. The premix will stop it from blowing up if you’re really worried about that, and of course porting the tiny intake it has would give a lot more power but I understand you don’t have a lot of time on your hands to fabricate something like that. But you could always Dremel out a little bit of material, and a rough intake surface helps mix the gas with the air better, cleaner burn, more power, bla bla bla
czcams.com/video/C0bw14RAXrU/video.html
That thing would be crazy, with an extra gear or two.
It would be possible to to do rather b welding build his own so it should fit tho this one too.
Or 5
Back in 1963 I had a minibike with 8" wheels and a Scott-Atwater 15 c.i. Outboard engine on it with a water tank up front and it thermo-syphened to cool like a Model T auto. Anyway, I am writing because of your mention of 'wheelieing'. Don't know if that's a word or not. What happened is that the first time that I went around a corner & 'gassed' it, the wheel came up while it was laid over. A real heart stopping moment, I'll say! Got straightened up and rolled off the throttle. I watched out and never did that again. BTW, that engine was from a class "C" race kart. Fun tho', since I survived.
you need to resize the intake ports to be round thats the air restriction that is causing the problems
czcams.com/video/hbaGwxAhuCU/video.html
Y’all shop truck is really cool
You Rock Adam
@@samsgarage1716 thanks Sam right back at ya bud
czcams.com/video/hbaGwxAhuCU/video.html
1967 ish? Made tough.
I wish y'all would've installed a boost gauge. That would've been really cool to see how much boost it's making. That Sachs single rotor is a beast with that small turbo on it.
Heck ya been waiting to see this cool lil bike to rip great job fellas
Nice to see it ripping 👍
Thanks for posting guys!
Thanks Mike! appreciate it!
That turbo sounds so cool man awesome build
6:56 that echo is like a sci fi bomber scene.
Daniel is looking more and more like "Danielle." You're KILLING US, dude! (love the bike, though!) LOL
czcams.com/video/C0bw14RAXrU/video.html
Exactly headbands went out in the 60's and even then only girls wore them. Guess college has taught him to be gender neutral.
@@Hoggdoc1946 rock and roll people wore them shits in the '80s.
Maybe this question have been asked millions times before but I wonder where your intro song comes from.
I really like it and didn't found it elsewhere.
I can't wait to see your next videos!
Thank you guys for sharing your passion 😊
Good work guys👍🏻 Love that the guy injured guy was the test pilot 🤣🤘🏻
Tip: During the 1979 IMSA racing season, Mazda ran it's RX-7 entry with fuel injection... which helped improve it's mid-range throttle response & power.
Definitely need some higher rpm clutching, rotaries don’t make any power low rpm wise so if you could toss an adjustable clutch or a tq converter on it you’d be set for the track. Then dial in the gearing for top end and it would absolutely scream. Definitely check the plugs to see what your mix looks like and then you can play with jet sizes/ 2 stroke mix ratios to really bring it to life. Absolutely wonderful work guys, keep it up 👍🏼
A gold chain? Your mini bike is flexing.
Adjust the pilot jet. Its the small screw under the carb nearest the intake side of the carb. Will help the low speed running
I like his comment, "It does wheelies and I kinda don't like that."
That thing sound like a 2 rotor! Amazing!!
It would be cool to have a sequential clutch setup in that thing.
czcams.com/video/hbaGwxAhuCU/video.html
@@Hitycooking Why did you post this video. It showed nothing about the topic.
Love that 68, Chevy!
i really think it needs a torque converter even stock no turbo
ya I think so too when they don't have a gearbox
@@delta2904 with the rpm been so high it just revs out to fast with out one
@@1981dasimpson yaa
czcams.com/video/hbaGwxAhuCU/video.html
@@Hitycooking are you taking the piss advertising your own page on some one elses comments
Very nice bike, sounds great! Good progression in the build also. I dont like the clutch band-break tho, those are scary with that much power. I am shure you could make a sprocket brake with some sort of mc calipers.
Great job guys, but b careful with that break setup if u break a chain how will you stop it ,that's scary.
What’s not to like? Good clean fun. Awesome!
2.30 I hear a Drumline Baby!!!!
Put a shifter cart transmission on it
This is so sick! I had no idea they made rotary engines this small lol
Was this filmed outside of a Blue Man Group concert?
Lol
Loving the rotary bike.
Coming from a man with a modded 2006 6port 6speed Rx8.
Very nice guys. It turned out excellent so far. I think with the right gearing and a stronger clutch , this thing would be a terror! 🙌🏻
Looks sick, would love to see a boost gauge to see how much boost its making.
Wow it’s got some pep in it’s step now
Sound's Awesome man! Nice work👍
now its anti-lag time!
You guys should put rounder tires on it so that it can lean over a little better.
It got that brap brap
Cool build. If you guys want, or when you can, you guys should port match the intake for better flow
Thanks for sharing your friend Rob from Canada ✌
This needs a 2 speed trans put on it, I love the build so far!
Crazy cool thanks for sharing your build a friend from Canada Rob ✌
If you took that motor apart and did some porting and open up that intake it would help a lot with throttle response but also you have a very long intake so of course the throttle is gonna be really laggy
This turbo rotary minibike is so cool!😎🏍️🏍️
I think i used to work with the tall dude riding the bike. at s&k moving furniture I was a mower tech
Top speed run
Looking forward to seeing that thing rip great vid guys!!!
you haven't hit redline quite yet, sounded about 5-6k when the guy with the boot was riding.
this thing goes!
It sounds good.
Howly i forgot this guy restoring cj7 just realize this is the same channel
Your making me remember snowmobiling with a boot cast on.
boost guage and a tacho would help
Maybe a squirt of nos to top it off. Good job guys.
This is awesome... air up those tires!
MY TURN!!!!!!!! MY TURN!!!!!!
Shouldn't it be smoking a little bit
more even with boost?
czcams.com/video/C0bw14RAXrU/video.html
The tank looks inadequate and if it doesent breath properly it could starve it for fuel. Needs bigger tank and better air/fuel
@@jeeperzcreeperzz ya I agree needs a bigger tank
get a RPM counter on it sounds like you are letting off just as it's about to sing
A boost guage would help also! And they NEVER pulled the plug to see how it was burning...
Try it without the muffler it seems like it may be restricted too much. Great build
That thing Sounds grEat ..it needs to be on the street dont be scared! 👍
Where is ur intercooler?
That did it! I'm Subscribed!
You boys have done a great job on that mini! Very impressed. Now, where would a guy find a Sachs rotary like that?
jo guys in ur carburetor should be 3 jets low rpm mid rpm and high rpm
Sounds like it has way more in it with different gears. Im eager to see what you guys can do with the gearing to change speed!
Like to see this against BoostedBoiz turbo shopping cart
Oh shit that's the ticket boosted bois and build break repeat winning combo
I think its time to take this to next level and get fuel injection system and programmable ecu to optimize power.. also maybe get bit better turbo than that thing so there is not chance of engine failing due turbo braking.
I love his hair he looks like a big poodle 🐕
Dope! But you guys need a better testing location. We need more shots of it
get like a 2 speed auto setup like some of the cars and cameras bikes
How about putting the turbo on the rotary go cart?
Power jet carb and 1inch clutch it will ramp the power jermey williams is a nice outboard
Great build, would make a perfect pit-bike for a rotary drifter ;-)
Damn I want one of these now
That sound ❤️❤️❤️❤️
someone needs to make a shopping cart kart the boosted boiz made one but it wasn’t really in depth lol
Thanks for the video
Pretty Cool. You guys wanna race it ?
you could put that rotary in a dirtbike frame that would be sick
No blow off valve
Noice! I just put a 212 cc in a mini bike similar to urs and it does willys when I do full throttle 😂
You guys should be running premix
I'm pretty sure they are, otherwise they would have already blown the engine, because they have been testing it out quite a bit.
Looks really fast.
I wonder if you can brake boost it
Hell ya love the content
Send it to varus who built hurts rx7s rotory and see if he can port it
Next mission is porting intake and outtake
Can you provide me a source of where you get the Rotory engine ? I want to start messing around with a Rotory and start learning
I say put a way bigger exhaust on it. Just to eliminate backpressure completely
Yeah I agree the turbo already adds back pressure to the exhaust it needs a little bit bigger exhaust
Oh yeah you can tell it’s way faster than before.
This is amazing
If u stretch it out a little bit have same sprocket linkage with beter carb y will run
It*
If you like rotarys check out the Wankelghini. Supercharged Rotary Lamborghini
Sweet I will check it out
Where can I buy a minibike like that one with a rotary engine? Or where can I buy a rotary engine like that one?
Joe and I look like we can be twins
Sounds good
Missing:College student,answers to Jason;Last seen heading west at @50mph yelling "The throttle's stuuuucck....".
Y'all are nuts, that's all i can say...
Where do you find such a small rotary? Do they make larger displacement singles?
Put a 90 on that air filter might give you room for your leg.