How to replace door seal rubber gasket on a Samsung washing machine drum
Vložit
- čas přidán 2. 07. 2024
- How to replace and fit a Samsung washing machine door seal a replacement door seal gasket is not an expensive part.
The replacement door seal gasket or boot as known in the USA is not an expensive part.
On Samsung washing machines the seal can be changed easily and the process will only take you under 1 hour.
▶ How to maintain and clean a Samsung washing machine drum
• How to clean a seal & ...
▶ Playlist on Samsung washing machine faults/ error codes and also tutorials and faq’s
• Samsung Washing Machin...
🛒 Samsung Door seals and tutorials and faq's
www.how-to-repair.com/help/se...
Please remember to subscribe to our channel and click on the bell notification to get reminders
czcams.com/users/Apart4u?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us as your favorites also I would be grateful if you would subscribe to our channel's
social media as this really helps my site and keeps us going.
CZcams. / apart4u
#replace_samsung_washing_machine_door_seal #fit_samsung_door_gasket_boot #how_to
How to replace Samsung washing machine time stamps:
00:00 Replace a door seal gasket or boot on 6kg, 7kg, 8kg, 9kg 10kg Samsung washing machine.
00:42 Tools needed to replace door seal gasket
00:42 About us
01:13 Remove the lid and screws holding the facial panel.
02:13 Remove the front panel, door seal retaining clips.
02:57 Replace door boot seal gasket Samsung Ecobubble QuickDrive, Direct drive, Digital inverter.
03:24 Unclip soapbox from the control panel.
04:14 IMPORTANT. procedure for drum retaining band removal.
04:14 Remove bad smells grime and mold out of Samsung washing machines.
06:40 Lining up the door sea boot gasket to drum.
09:32 Front panel clip alignment chassis or case.
11:00 Samsung drums comply with the right to repair act.
12:14 Outer door band clip fitting.
13:47 Testing for leaks.
14:09 Support how-to-repair.com buy Paul a beer - Jak na to + styl
Thanks
Fantastic video thanks for making that - made my job straightforward and simple!
"The retaining clip screws the wrong way!" Thank you so much this one comment has just saved my sanity!
Thank you for doing such an amazing job here. It is so thorough and clear. It’s like taking a master class. You can’t know how much it is appreciated!
Awesome video. Thorough and straight forward to follow. Thank you so much. Seal replaced and tested fine! I’m off to buy you a beer!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
I think this is the best tutorial on replacing a door bib gasket and thanks very much, I have a few comments based on my experience.
My model is a Samsung WF42H5000AW/A2. Some of the screws were in slightly different locations than the one above, but everything made sense. The only obvious oddity was that the only reverse thread screw was not on the gasket ring, but just on the big hose that attaches to the gasket, the gasket ring was the usual righty tighty. After spending ten minutes trying to get the gasket ring on between the weights, I decided to remove the weights. Oh, for sure you want to remove the weights, both top and bottom. Six bolts and you have complete access to the rim. No issues getting the ring in place with the weights off.
I wound up undoing and re-doing my ring three times, so I would put a fair amount of emphasis on where the tightening screw is located. I tried to put it in a slightly easier place to have access to the screw, but it was in a place where the weights were going to cinched it, so I moved it back. The next round I had a small leak and had to go back and really screw down that ring as far as I could. The screw has a phillips and a hex head as well. When I could turn the screw anymore I used a small ratchet to really clamp the ring on and that made the difference
I watched so many videos trying to figure this out. Wish I’d found yours first. Perfectly explained. Thank you!
I've spent a couple of hours trying to work out how to do the seal on the door. I can't thank you enough for this video!
Great video, and very supportive when you have all the covers off and the job ahead. Mine was a Samsung WW95N6 10kg and about 3 years old, and had a few slight differences - an extra pipe going into the top of the new gasket that required me to cut a hole to attach the new one in. and a wired cable attached to the front cover that I had to unplug from the wiring loom to allow me to fully remove that front panel. Apart from that the video was a blessing and great company to work along side me 🙂 All done and great job!!
Great video, helped me immensely. It does need an update though, as my Samsung (ecobubble, but presumably a later model than the one shown?) had got a hose going into the seal at the top, plus some cables and cable ties on the control panel which meant it didn't lift straight out and it took quite a while to find out what the problem was. I crossed my fingers and gave it a go anyway, and thankfully for everything else I could just follow these instructions. One other observation. Mini sockets - OH MY GOD, what a revelation! Used one on the front panel screws as suggested, and also on the inner band screw (the anticlock-to-tighten one) after I couldn't get the proper purchase with a screwdriver. SOOOO much easier.
Thanks again, wouldn't even have attempted it without this video.
Really glad I was able to help, there are so many bad videos that do not explain the simplest of things. I try to make videos in the way that everyone understands. Really glad you're getting your machine back together. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @Bluefin21-qt2st please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Excellent video. Saved me loads of time trying to figure it out myself. Top job!
Thank you so much, my husband did as you instructed. No chance without your assistance. Thank you again.
Thanks so much for this.. I'm from Australia. Different model, different seal but same same but different process.. Saved me a fortune getting out a serviceman.. Much easier to take off concrete weights to fit.
Absolutely fantastic explanation, buy this guy a beer!
Thank you so much! This video is so clear and step by step. We managed to not call the technician. We'll always rely on you whether we need supplies from now on!
Thank you for taking the time to do this in such a methodical and clear way. Very much appreciated :)
No probs Thank you for leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
This was so helpful, thank you. I feel like a superhero having managed to do it in my own with this video as a guide!
Thank you for this superb how to video. It took a good hour but our machine is back in operation and good for another couple of years.
This.Was.Wonderful, THANK YOU!
Thanks a lot for this video. I have replaced the seal without any problem. And it was not my first time working with you :)
Awesome video, spot on. I needed to buy a new inner band as it wouldn't turn at all and the new one was easy. The external band was too hard (it's an old machine so I did stretch the spring a little, if it leaks I'll just need to buy a new outer band. Thanks Paul!
Thanks a lot for helping me out. I made the same mistake by turning the screw anti-clockwise. Fortunately I didn't damage the screw. God bless you and have an amazing weekend matey. Big love from the Netherlands.
Thank you! Great tips
Thank you for some clear well described set of instructions, perfect 👍
Excellent presentation & attention to detail
Great video. I managed to successfully replace the door seal on my Samsung washing machine after watching this. Small tip. Use the plastic levers from a bicycle type repair kit to assist removing
eplacing the (sprung) wire band to avoid any risk of damaging the rubber or scratching the paint.
This was really helpful and quite a straightforward replacement once you can see all the steps/order to do it in. Thanks for putting such an essential bit of knowledge up here. Not sure I could have done it from a manual without watching an expert do it first.
Glad it helped! Thank you for leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi, first thank you so much for the video on how to change the seal, had a bit of a time getting the back seal retainer clip of as the screw would not screw clockwise, eventually manged to get the band off, got the new seal on and rebuilt it all but when tried to get it to do a wash I was getting a dc error code, took the door lock switch back off to see if I'd not connected the cable plug but all connections where made, any suggestions would be greatly appreciated, also the door has another bit on front for letting you drop a sock or whatever in, model number is WW70K5410UW
Thank you so much for this video👊🏻
Thnx a million. Very good and clear explanation. Terrific job. Made the job very good to do with this guide.
This video was really helpful for me! much appreciated! great work!
Thank you! Very clear step by step instructions and guidance. Took approx 2hrs from start to finish being very careful with each step. Test run resulted in no leaks!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thank you soo much. i followed every step, and everything worked out
Superb video. Straight to the point. I gave up with a few others but not this one. Highly recommended.
Thank you very much for the lovely compliment What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @healyfamily8877 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Excellent Video.Great Job👍🙏
Helpful, explanatory video. Needed to replace the gasket on a Montpellier MW5101P model. thanks for posting!
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
@@How-to-repair done
Thank you for your video! Helped me a lot!
Just done this on a WW90TA046AE/EU - thanks to this video it was a lot easier I'm sure that thumbing through the service manual (if you can even easily find them these days!) - be methodical and follow the steps shown and it will work out!
Thank you sir for such detailed video instuction with seal rubber gasket. I appreciate it! 👍
Glad it helped
You are a legend thanks for the tips
Thank you, really helps!
Really helpful video, thanks! Took a million attempts but I got the outer retaining wire on
please remember to subscribe as that's is was keeps this channel going. Thanks 👍
You guys are legends keep posting how to videos 👍
Thanks! Will do!
Great help ! Really good video
Thanks for the video it was a great help
very useful and very clear keep going
Brilliant explaining thank you
Thank you For leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Excellent presentation and help! very clear. Thank you!
Glad you managed to get your door seal sorted. I have a new version of this video as well just in case you have a later model. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @kootenayprecisionearthwork6012 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
انت قمة في الذوق و الأخلاق
thankyou very much its Great explanations
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Amazing thanks so much! Helped immensely!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Another great video.
glad you enjoyed it please remember to subscribe to
Thank you for the video. The rubber beeding was slipped in my unit and fixed it with the help of your video
Glad it helped
instructions worked perfectly on my machine, which happens to have a 'normal' thread on the circular clip.
Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Great video, thank you. I only had two differences on an EU 7 liter model: the inner wire screw could not be tightened all the way, just a little bit and the top front panel with the dials was a bit more difficult to remove and wires had to be unclipped. I even managed to break off a little wire holding plastic flap but that should not impact functionality. All seems to work fine now after replacement. Thanks
Great job, I turned the air blue trying to refit that outer spring !
Glad the video helped you @OffshoreNath please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Many thanks really helpful tutorial
Really glad it helped you fix your problem Thank you for leaving a comment this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Very helpful! Thank You! Works also on newer ww80t754dbt/s7 just the reverse screw is regular one.
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. czcams.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video. Thank you for the detailed tutorial
Hi @stephanhogenboom3012 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
@@How-to-repair i will look into sharing it. Meanwhile enjoy the beer i donated
great vid my,makes my job much better..
Good to hear! glad we could help you @williammathews6603 this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks a million for a fantastic video! I am pretty sure that I could not have done the job without it.
I took the weights of the front of the drum to make access a bit easier and get a bit more confidence that I had a good seal.
Anyway, thanks again! 🎉
Amazing thank you so much. Very clear and perfect level of detail. Mine was brand new less than two years ago and didn’t have the front retaining clip on it.. I wonder if this was a new design or a mistake at assembly ?
Thanks!!! Just finished my repair and in a test run for leaks now.
I hope you don't have any leaks I'm glad the video assisted you
It worked! No leaks 🙏
Can I ask for link how to clean seal rubber. Thank you for good explanations how replacement.
Supper Danke
I had great trouble getting the soabox out and it turned out i broke it, im halfway the repair at this moment, the doorseal came of the soapbox i dare not touch, cause i think it might still work, that means that if i can manage to clean and replace the door seal im out in the clean, but this video needs more guidance on removing the soapbox for the model
wf1704ysw
(samsung ecobuble 7.0 kg)
otherwise great video, especialy the part where you told me about the anticlockwise screw, now lets hope i can still use it with a broken soapbox
update - in this model the panel comes off before the soapbox holder, there are extra screws in there, it now totaly broke off, but i might still be able to fix it - continuing and salvaging what is possible at this point
Teşekkürler
please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thank you. I’ve just cHnged mine using this video. However I didn’t have the metal spring you took off at start and was the last thing you put on. Mines an ecobubble 9.0kg. I guess they don’t all have one ???
yes some machines will be different please remember to subscribe as that's is was keeps this channel going. Thanks 👍
@@How-to-repair thanks will do
Good video! Thank you. Is there any video for a newer Samsung model? (wd10n642raw)
I have not made a video on this yet, but when one comes into the workshop I imagine I will be making a video. Have a great Christmas and a happy New Year. Thank you very much for subscribing to the channel as that really does help our CZcams channel
No need to take the front of machine off. Use a long reach screw driver for retaining clip.
for those that know what there doing can do it this way but a lot of people need to take the front of as it might be their first attempt
To put the spring and band on instead of screwdrivers I used bicycle tyre levers
That really is the perfect tool to use as it will not pinch the rubber. Have a great New Year and please remember to subscribe to the channel.
glad we could help you @stix1079 this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
I broke my mother's washing machine seal and need to quickly figure out how to put the metal ring back on. This video has save me and my bank account from her wrath thank you.
Hello how 2repair great content as usual, have you got any tutorials on Bosch tumble dryer belt replacement, be good to know a different technique thanks..
you are a lucky guy as just picked up a bosch clasic7 to do belt replacement over the next couple of weeks
Thanks very much appreciated I’ll look forward to seeing it done👍
Any idea what drum seal o need for this WW80K5410UW ?
You should be able to find it on the website use your model number. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Great video. Extremely helpful.
I am looking for a door seal for my washing machine. The model number is WF60F4EFW2W/WS.
Can you point me the correct seal?
Many thanks.
Hi @diogotavares5995 I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/
this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
So the only machines that allow you to change bearings are Samsung, Fisher & Paykel and Haier?
You do not post the email to email you. That seal that you just replaced is the exact one that I need I believe and I cannot find it anywhere.
If door seal is just dirty, does it need to be replaced? They go for $120 or so apiece.
Jezus its possible to put it on without deinstalling the front panel? I never deinstalled it whilr changing the rubber but that was Gorenje and other companies
A lot of machines now are very difficult due to the way the manufacturers assemble them @LordCarlSagan please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
If I could offer advice to those who are changing their front loader gasket. Stop, watch this video and follow his instructions… don’t try and cut corners by not taking the front off like those other videos..
اتمنى إضافة اللغة العربية
need to change mine major black mold issue
Once you have fitted the new one, it is always worth leaving the door ajar, so that moisture does not buildup glad we could help you @jamesz8496 this is for you czcams.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
But you can not mowe that screw from metal wire only 3 turn andbits block
Without actually seeing which one do you have a problem with it is very hard for me to answer this comment. Sorry to be vague feel free to contact me through the website if you need further assistance