Crafting A Wooden Bottle Opener.
Vložit
- čas přidán 28. 06. 2020
- Crafting a wooden bottle opener with magnet this will be an elegant addition to anyone’s home and no two are the same, made from carefully chosen woods, hand sculpted/shaped by myself.
Made from Tiger Oak, Rippled maple, Walnut, Wenge and Oak.
In addition to the elegant look, this wooden bottle opener prevents the bottle caps from being wrinkled upon removal. A inset rare earth magnet holds the cap until you remove it.
They come with their own individual bag made from Kantha silk.
Website: www.hewandawe.com/
💪 Become a Patron - / hewandawe
Find me on Social media
Facebook: / hewandawe
Rumble: rumble.com/c/HewAndAwe
Do you have an idea, a project to work on or a proposal? Please leave a comment below. I will do it for you.
If there’s something I’ve made you would like to buy: www.hewandawe.com/
★Thank for watching!
★Please like, share, and subscribe my channel here : / hewandawe
woodworkingprojects #woodworking #hewandawe - Jak na to + styl
Only you could turn a bottle opener into a piece of practical art. Great work Ben as always.
They’re lovely in the hand I love using mine every day never goes in a drawer I like to see it out 😊
Those are the most beautiful bottle openers I've ever seen.
Fantastic!
Cheers Robert! I can say having used them every day since theyre lovely to hold too - the cold beer is just a plus 😉
Had a bash at one of these for a Father’s Day present - turned out quite nicely. Liked the description of shaping. Found it a pain in the arse to drill through the centre of the coin. Got near enough in the end. Cheers for the videos!
Oh man was that the worst part!!! I remember I only had one more coin than I needed so only one I could screw up, not cause Im tight dont get me wrong I wanted only coins with the three lions on the face, they didnt seem easy to find at the time.
Nice work, I like how comfortable the bottle opener looks!
Thank you, they are nice to use makes a beer at the end of. the day even nicer 😇
So beautiful! I would love to own one in each type of wood! All we have where I’m from is mesquite in Cedar.
Thank you Kevin, you’re kidding right??? Where are you then?
Beautiful! What finish did you use in the bottle openers?
Thank you ☺️ I used Osmo polyX dude.
I really loved it. What did you use to make it look shiny at the end ? I am generally confused between varnish oil and wax
I used a wax oil, Osmo polyX 👍
Excellent work man!!!
Thanks mate, thank you for the compliment 😊
Bit!!in man. I’m going to try that finish with a hi build conversion lacquer.
Liking the cool voice overs too.
Thanks mate, what’s that like in durability terms being handled etc?
Hew and Awe
I use it on all my natural custom cabinets, coffee tables etc. Comes in 3 sheens. Dull rub (flat or satin) medium rub (semi gloss) high rub (high gloss). I add colorant and dye stains as well to it. Drys to the touch in about 5 mins depending on temp and humidity levels. I find it very durable. Just can’t say with the way you polish and buff your finish what it would do. That’s way I’m gonna try it. Peace
Luke thanks bud, let me know how it goes- that would be nice 😊
Lovely craftsmanship 👌😊 I hope your charging enough for these little beauties
Thank you Karl, £40 and ten pence 😂
@@HewAndAwe haha that's down to the penny 😂
👋
They turned out fantastically and that finish!
Would be interested to know about the rasps you used. Also curious if you have recommendation for forstner bits as mine don't cut anything like as neatly as yours.
Thank you Chris, the rasps are IWASAKI CARVING FILE HALF ROUND EXTRA FINE 150MM IW-150CPHREF. Most forstner bits are fine, the fisch Bosch Festool are excellent I have a mixture of crap and good and find what makes the difference is honing them myself, I use a file for taking off the burr from chain saw bars by hand and on a slow speed, speed kills drill bits fast!
@@HewAndAwe thank you for the advice, much appreciated! Really enjoying your videos and learning so much.
Great design. Might give it a go - good use for small scraps. One question: where are your rasps from? Mine are all of the 'tear it to shreds' variety!
Funny I get asked this a lot this is them. www.workshopheaven.com/iwasaki-carving-file-iw-150cphr-halfround-150mm.html?gclid=Cj0KCQjwqPGUBhDwARIsANNwjV7nJYJW8EonK9S-mWzxOb0IIv-cYtpHvcWWAOjsi0w_e33gYlmWm8QaAlEWEALw_wcB worth every penny!
bel lavoro, bravo. sono una bella idea per un regalo. posso chiedere le misure per provare .🤩 grazie
What is the metal part ...looks like a coin?
It's an English 10p piece isnt it ?
Ross Nanfito it’s a 10 pence piece UK money with the lions facing upwards 👍