Honda Foreman won’t stay running. How to clean carb.
Vložit
- čas přidán 7. 07. 2020
- my honda four wheeler wont start. I clean the carb and get her running.
Honda Foreman 4 wheeler won’t run. Honda foreman carb rebuild Visit my sponsors at:
superclean.com/ Super clean is there for all your cleaning needs. Super Easy. Super Fast. Super Clean.
Get some awesome LED lights at www.auxito.com
Use coupon code: BACKYARDGARAGE to get 20% off your purchase. - Auta a dopravní prostředky
Thanks for the thorough video! Impressive one-hand work while you were holding the camera. I’ve got my parts and am about to do this same job.
Thank you!
I have the 500 hundred Rubicon. Air inlet tube that runs into the box is on the otherside. Took me 6 hrs to clean that carb. Always loose them plastic clips that hold the panels on. Bought it last year . Last year as soon as you hit the start button it would crank immediately. Drained all gas. Cleaned carb. Hard to start the first time in 80 deg weather. Once it starts no more problems untill the next day. Driven me mad.lol
Yeah, can be a pain
That’s the carb bowl heater with the electric connector on it.
Very thorough video my friend,, you covered it well. Many thanks!
Thank you so much! Appreciate the feedback.
Great video. Very informative and gives me confidence to do it all myself. Thanks
No problem glad I was able to share my knowledge
Ok cant find that tool to take out the mix screw. I only needed it once ... Its lost. Lol. Now what do i do? Think ill try rigging something i already have. Ill keep ya posted.
Great instruction, I'm totally inspired to rebuild my foreman carburator. This is my first straight gas carburator rebuild. You are so confident in knew what you were doing and made it look like I can do it so here I am doing it. Anyway I got to the mix screw where you're supposed to count two and a half down and then take it out or see how it is 2 and a half or whatever anyways it is a special adjustment tool so I believe that my chainsaw my Husqvarna adjustment tool might work.
Thank you for the kind words. It’s not hard at all just might be daunting at first if you have never done it. For the adjustment screw, You can also use just a flat blade screwdriver. I don’t have any special tools. Just be sure to note where everything goes and how many turns out the mixture screw is and you should be good to go. Good luck with rebuilding it. I hope it runs as good as mine did when I was done.
Appreciate the video, made the process easy
Glad it helped
Great vid helped me
Awesome! Glad I could help you!
Watched video & took notes. You did a good thorough job explaining how to rebuild the Carb. Carb float stuck open on mine, pouring gas.
Have you tried to close it by tapping the carb base with a screwdriver or small hammer?
@@BackyardGarage1 I tried Pecking on carb & Seafoam with no luck. After watching your video I will get to work rebuilding it. Thanks for the help.
@@ancilhall2933 ok great! Good luck! Tilts super easy if you have any doubts, just take pictures as you go and make sure to count the turns on the idle mixture screw from fully seated when you take it all apart to clean.
@@BackyardGarage1 I wrote down step by step what you said in the video & made a diagram of the carb. Thanks you for helping.
@@ancilhall2933 awesome! Super happy to help at least one person.
very informative I used your instructions to do mine but could you tell me about that rubber piece you took out in bottom of carb next to that jet should it have something inside of it mine has something that looks brown in color or should it be just an open hole ?
It’s probably a filter.
Y does it have 2 fuel lines going in to it what is the green or blue one for and y does it have a y in the fuil line for 2 of them mine only has one
I would have to look at yours but it’s because one of mine is a prime and I believe yours is a non prime one
Not too surprised to see that the washer on the main adjustable needle was already lost.
Yep they generally are and of course you can’t just get a new washer
Need to mount camera to a head band to have both hands
Yeah that was before I had my tripods that I have now
I believe that electric line coming off of it is the carb warmer I completely sure of that cuz I know it has manual choke so it don't need electric hook and manual Chuck but I believe it's listed as the carb warmer once again I can be completely wrong but this is what we're here to do share information that's the way I understand it but I can be wrong and a fam disregard it as another idiot on CZcams that would be me LOL
You would be correct on that! I had to check it out as it’s got the manual choke. But thanks for sharing! I learn something new every day. 😊