Honda Foreman TRX 450 Leaking Gas: How to Fix it!
Vložit
- čas přidán 22. 09. 2022
- This Honda Foreman came in with a fuel leak and would not start! Full walkthrough on how to replace the carburetor and how to make sure you buy the correct one! it’s easier than you think! Subscribe for more content and how to videos!
🌎WE SHIP PARTS WORLDWIDE 🌎
Get Merch & Parts Request:
shopleftys.com
Find us on Facebook and Instagram
Lefty's Snowmobile & ATV Salvage
#honda foreman
#gas leak
#repair - Auta a dopravní prostředky
Hi , I have the same problem with may 450S it that an Original new carb or after market one as I’m look for one In UK
Where is the pilot screw located at on Honda foreman 400
Great video! If you were just going to replace that primer pump where it was leaking….is it as
simple as taking those two screws off and throwing a new primer pump assembly on there? Or do you have to pull out the carb to do that? Thanks!
Thanks Al! Yes the primer can just be replaced without even removing the carb. In this particular situation the customer had someone else do some work inside the carburetor that he didn’t trust, and came to us wanting to just replace the entire thing.
How did the cheap carb do..we didn’t get to hear much running during and after adjustments
It ran great!!
what is the black hose that hangs from the bottom? doesn't connect to anything? bleeder hose? Mine just went missing and gas leaking out the nipple on the bottom. Can't seem figure out what used to be there.
Ya that should be the drain for the fuel bowl. The hose doesn’t really matter as it’s just to direct the fuel down to the ground when you open the drain screw. I would make sure the drain screw is tight.
@@leftyssnowmobileatvsalvage2344 mmm guess i need figure out which one the drain screw is.... it was pouring out the nipple at the bottom but since seems to be coming out from everywhere. not sure if fuel filter is backed up or what happened... i look for the drain screw tomorrow! ty
@@guyseamster7573by by by😢😅 6:52
Does this replacement carb still working good after almost two years?
It hasn’t returned for warranty work so I’m assuming it’s still running good 🤷♂️
Yeah and as soon as you shut it off. Carb was leaking again..right? Been there.
So basically you have to buy a whole new carb to fix the leak
You can purchase just the plunger kit and reseal just that, but in this case the customer opted for a brand new carb.