Wood Turning a Big Vase
Vložit
- čas přidán 19. 02. 2020
- This is the first vase I woodturned with a gouge. I put a very green log on the lathe, so it made practicing very fun again. I decided to change the shape halfway through, and I'm glad I did. I wasn't liking the look, and hollowing it out would have been a pain.
My tools:
Starbond Glue: bit.ly/2RFrayA (Use discount code "cook" for 10% off!)
Resin: amzn.to/2nUhFPg
Finishing Oil: amzn.to/2oAFPP6
Carbide Chisels: amzn.to/2NUiEdq
Face Shield: amzn.to/2Ac4Cvj
Center Finder: amzn.to/2ld06Ju
Jet Lathe: amzn.to/2qG2wD5
Nova Chuck: amzn.to/32tJvkm
Respirator: amzn.to/2N7mxfm
Miter Saw: amzn.to/2ZpjuBW
Drill: amzn.to/2XtnW0G
Square: amzn.to/2VaCNzW
Clamps: amzn.to/2UvPSiZ
*if you shop through these links I may receive a small commission. The price is the same for you, but it helps support me as a beginner woodturner in my quest to get a bigger lathe to make bigger projects, and I really appreciate it!
#woodturning
#woodworking - Jak na to + styl
Beautiful wood. Love the vase. What kind of wood is it? How thick is your base? I'm wondering if it will crack when drying.
Thanks Suzette! It jacaranda. I have a big stash drying now haha. The base was maybe 3/4" thick, and very surprisingly it hasn't cracked in the 2 weeks since I made it
Cook Woodworks - not familiar with that kind of wood. It looks like alabaster. Quite lovely.
@@CookWoodworks I love wood turnings. I want to be a professional like you!
@@CookWoodworks I want to get into wood turning but I don't know watch lathe to buy what would you recommend and what wood do you recommend and where would I get the chisel for woodturning
@@matthewkelly-barnett4480 tr
All those wood chippings and dust spewing out is almost just as satisfying as the wood cutting to me haha
It's really cool how you can actually see the wood changing colors from oxidizing as you cut it.
Yeah I was a little mesmerized a few times in the middle of turning it haha
Sean, it's not oxidizing... it's drying.
Beautiful vase. My brother who is a carpenter, uses jacaranda quite a lot for furniture. It’s a beautiful wood 👏👏👏
This woodworking is so satisfying! I love woodworking so much!♡
That's a beautiful outline you gave to your vase and the grain's gorgeous. Thank you very much for sharing.
Thank you!
Looks like antique vase. Good job Drew and nice practice with bowl gouge 👍
Stunning vase
Nice work, turned out great, cheers John
Thanks John!
I love turning green wood, I could almost smell it :)
Great looking vase
Beautiful wood and graceful vase. Nice
Like the unusual colour, looks like marble. 👍🏼
That smells so good
Nice vase....
Another great project buddy....looks awesome! Have a great weekend
I see the CZcams safety police are on your case 😝
Great video! You got good fast with that gouge!!! I need lots more practice. Good job!!!
Thanks Gayle! I still make plenty of mistakes, but the practice does help
When you do a log... I worry about the pith ... did it stay intact and not crack as you dried? I do like the wood too.
Looks great btw
Beatiful!!
Great looking vase :-)
Is that a green log? If so how do you keep it from cracking after it is turned? Thanks
Nice brother👍
Jupiter Vase. Awesome stuff.
I thought the same about jupiter 😁👍
Dạ cho em hỏi gỗ đó gỗ gì mà thấy tiện mềm vậy
Thanks for throwing in some parts that were not sped up!
Amazing 👌👌👌👍 great job
Can i know how you can made it ? Because i really want to learning about wood ... with college in university or from what you can do that ? Please share ... thankyou
Good Job 👍👍👍
What tool do you use for hollowing? And please let us know how it dries, with that pith in the middle! :D
This is the tool I use: amzn.to/2SMDnl6
I made this vase about 2 weeks ago, and shockingly there have been no cracks. I totally assumed it would
Great first try 👍👍👍👍
Nicely proportioned piece. What are the overall height & width?
Very nice!
Thanks!
What tool did you use to core the vase
I love the big vase. I went to Workbench this week and got motivated. I am ready to buy my first lathe. Do you have any suggestion on which brand or size to purchase? Thanks, Mark
Mine is a Jet, and it's a good combo of quality and affordability. I'd start with a medium size lathe. A mini lathe is too small, and I'd only get a full size if you've tried it a few times and know for sure it's a long term hobby. But it's impossible not to get hooked!
I own a nova comet II and love it the combo kit is a good value, but you'll want/need to buy more chisels shortly after.
I really like my 70-1420 Rikon. It’s a little bigger than midi.
What did you use for a finish?? The vase looks GREAT
This one I used danish oil, thanks for watching!
How’s you get that chuck to hold that vase without the tail stock? My G3 was notorious for letting it go.
Yeah I have a few videos where that happens haha. Now I’m very slow and delicate hollowing vases
Watching you do this is so relaxing.
You make it look so easy, but I'm sure you have a lot of experience under your belt.
Just curious, how much do these pieces sell for? Do you have an online store?
So impressive....stay well
Thanks for the kinds words! I do have an Etsy shop: etsy.me/2y07CO6
What lathe speed do you run whilst using forstner drill bits
As slow as my lathe goes, 320 I think
Looks cool Drew you and that bowl gouge seem to have made friends
Very good work
What kind of wood is it ? Sycamore ? Maple ?
It's called jacaranda
Looks real top heavy
Looks like the surface of Jupiter. I would leave the bottom that you cut in the end but it is not a big deal. Very precise work, though. I like it.
Thanks very much
Belo trabalho friend.
What size forsner bit is that?
Muito bom seu trabalho abraço fique com deus que abençoa
You're not big on conversation are u ??? LOL I understand...u let the craftsmanship do all the talking. I can dig that. OUTSTANDING work !!
good job
I wonder if you can help someone in Nepal who uses their legs to roll the wood to make vase. Can you please share what kinds of motor and equipment needed to roll the vase?
Satisfying
Little late to ask but what brand lathe you have?
looks like my Jet 1221SP
Why did you cut off the bottom at the end? I thought it looked nice with the foot attached
Thanks for sharing, nice Piece. Full View and Like
Thank you!
Вот ты дойош мужик. Классно спасибо за видео
Nice practice piece Drew. Your gouge work looks ready for the big time👍 The shape is pretty too🎨 Thanks for showing to us🙏 -Mike
So how did you make the self-adjusting tool rest seen at 1:40 ? Gotta get me one too 😁
It's a long process to make that tool rest, but the final step is called "Don't tighten." 🤣
@@CookWoodworks gotcha 😁😁😁
what is the name of this machine?
All that saw dust , what is used for? Does it go to waste?
Hope they don't pack it and sell it as kous kous.
👍
Can you do other materials like plastic or sommin, that would be cool!
*splinters have entered the chat*
🤣🤣🤣
I have experience in this business and I hope to have a machine like this one 😓
Came out, sweet Lil brother.
Waow
Очень круто👍
Like a jupiter
Ну почему не оставить ту часть, которую обрезал. Ведь устойчивость вазы была бы лучше, да и вид, по мне лучше. Лайк.
That just look like jupiter 9:40
nice
👌👌👌👌👌
😍😍😍😍😍😍😍
why are is one nail painted, 5:28
It's satisifying
!!! Прелесть)
Thats easy
Are you a wizard?
Show us what it looked like one week later after it dried out.
Красиво, но только дно неустойчивое.
광고제거 10:43
God is coming
Jüpiter ??
Кто Русский лайк
Is this a satisfying video
لا
Aww some broda
Sub from me❤
My name
You are a good person to me I am not a good friend and a person I am not even sure that I can do this to myself you just want me to be a good person and I am not sure that the app does it to be
The base looks very small.....it's a tumble vase.....
Generasi +62 mana suaranya😂
why so many steps
Besides the real fact the base is far too small for its size!!!!!
یه تنه درخت نابود کرد یه گلدان فسقلی ساخت
Неустойчивый.
I won't learn this
این کاره نبود طرف اخرش هم کلا لق میزد از همون اولم بد بست
تنل🦓🦓🦓🦓🦓🦓🦓🦓🦓
Not excellent
Sorry. But my ear is hurting after seeing the video, the sound was too loud. Needs improvement but the video was still good. Like it 👍
Why must you waste so much wood?????
I didn't
Fake
Lol how?
Your so unsafe. You need to be more safe. Why can’t you be safer. Safety is important. Safe safe safe safe safe!!!!