Stability control lights: Assuming you have good tires, when and why do they pop up?
Vložit
- čas přidán 17. 02. 2016
- We discuss the various Stability Control lights, and how and why you might see them illuminated on your instrument panel -- even when there's nothing wrong. This assumes you have good tires. There are three distinct situations that may result in one of these lights being illuminated, and unlike ANY other warning light, this one will come on to indicate that the system is doing its job! Watch our demonstrations.
We'll add that worn tires can contribute to this light activating more often than they should, so do check your tread depth -- or have someone knowledgeable do so.
We'll also add that some manufacturers add control of engine power to their systems. So if you are actually slipping, you may experience a power loss. Engine power will be restored when control is restored.
For more videos and information on automotive warning lights and push-button start cars, check our channel here on CZcams or go to DashboardSymbols.com.
If we helped you and you see the "Thanks" button below the video, please lend your support to our efforts.
#CarDeadKeyFob #DeadKeySolutions
----------------------------------------------------------------------
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true. - Auta a dopravní prostředky
That was a great help my wife was concerned but you reassured her through this video thank you once agin👍👍👍👍👍👌
Cool. Reassurance and clarity are the driving forces, thank you!
Thank you sir. I wanted to go visit my parents this weekend but wasn't sure if I should since this light popped up and stayed on yesterday! They live 6 hours away so I'll have it checked out anyway but now I'm not too alarmed lol
Good. Drive careful...
Can you visit me I live in Buffalo 😍❤
Same here , mine pops up every like say 3 days then goes away an I’m not on freeway an not raining so I guess I’ll get it checked out soon but this video helps
The most clear and elaborate explanation on CZcams
Hope it was helpful...
love this video plain very clear and informative
Thanks...
DashboardSymbols.com
the 2nd demonstration you said where the light stays on! well my engine light also came on do you have an idea what it could be?2011 dodge grand caravan
Sorry, no, the trouble code will need to be read. But, the engine light being on is likely WHY the stability control light is on. The engine trouble light likely shut down the stability control.
Thank you well explained
You're welcome...
Glad I found this video. My 2010 Chevy Colorado has been doing this for months and my brakes pump sometimes. I think I figured the problem and the best I could come up with is that my steering sensor is triggering that. I also think I may need to replace my drum brakes. Is there a way I could turn the stabilitrak or what do you think is causing my truck to pump it's brakes sometimes when I brake? Thanks.
If your brakes pump on their own, forget about steering sensors, etc. and get that fixed. Brake booster or ABS...
Thank you for sharing this tips its really helpful for me god bless
You're welcome. Please do make sure you have good tires. Bad ones slip more often...
thanks so much!
You're welcome. Do make sure your tires are good! Worn tires will cause more slip and the system to activate...
I saw this light come on when I was parking my 2008 Lexus IS250 on a weirdly paved and angled street. It went on briefly for like 1 or 2 seconds and now I never seen it again. It’s gone, never seen it happen after I left the parking spot and drove normally. Now, I once had it never go off with the VSC and ABS light on. What it ended up being was a Wheel speed sensor went bad.
Don't actually see a question here, but it all sounds quite normal. And the bad sensor shut down multiple systems which were restored on repair...
DashboardSymbols.com I have a 2006 jeep grand Cherokee 4x4 limited I had the traction light and esp/bas light both popped on at the same time(pushing off button does not turn it off, completely turn off the car it does go off), then it revs to higher than normal rpms during acceleration and feels like it give a jerk during gear changes..
Hi one two. Well this sounds like a transmission or axle problem, and not a traction or stability control issue. Of course, it will take an actual hands on examination to properly diagnose. Don't wait -- it will likely get worse and could be quite dangerous.
Had this problem today in my infiniti g37...i live in Atlanta and we’ve been getting a lot of rain lately and my stability control light just came on and stayed on until I made it to work. I shut my car off for a few minutes and restarted but the light didn’t come back on. Glad to know that’s normal.
Honestly, what you described is NOT normal. If the lights stays on -- not flashing or blinking intermittently -- it means the system activated and discovered a problem with the SC system. A number of issues COULD have resolved themselves, but do NOT ignore this if it continues to happen.
+dashboardsymbols.com thank you for replying. I will definitely keep an eye on it!
Hello I have a 2011 Mazda 3i sport and that light comes one sometimes but then diseaper and I have a hard time controlling my car at some turns and my engine still makes a strange noise. Do you have any advice?
Well yes. Given the fact that the car is difficult to control at times, my best advice is to find a repair shop you trust and have the car looked at. Soon...
It cannot be diagnosed from afar.
This took a load off my mind ty so much
I'm sorry to burst your bubble, but is the light stays on, there is a problem with the stability control system. A very important safety system, particularly in the winter...
@@DashboardSymbols so basically I would start driving and when I turn onto the road called academy it would come on no other lights just came on and then this morning wasnt on at all
@@rainbear1987 Well, keep an eye out. If its stays on, have the system checked out.
@@DashboardSymbols ty so much appreciate you
Good. Best to be sure...
Thank you sir for sharing your knowledge with the rest of us. Perhaps you have some insights on my particular situation. I have a Dodge caravan with an odd problem. Occasionally when I start the engine, the traction control light AND the check engine light stay on. This is BEFORE I even put it in gear. When driving, I experience an obvious loss in power and struggle to reach 60 mph. When I then pull over and shut off my engine, wait a minute and restart the engine, the Traction Control light will go out but the check engine light will remain on. Now it will drive normally and I can once again reach 60 mph easily. In fact, I can put the pedal to the floor and accelerate rapidly, which I could NOT do previously. After a while, the check engine light will go out as well, and the vehicle operates just fine. What do you think???
Wow, sorry, but that will need someone hands on. However, I can say that the traction control (likely off) light is on because the engine has a problem. The problem is resolved, so the car runs normal and the traction control is back on (light out). However, the car knows somethings needs to be checked out, so the check engine light stays on. Make sense?
Bottom line, you need a good mechanic/auto shop...
Thanks for the quick reply. Yes, your comment does make sense and I wish I could find someone who is so well-versed in this kind of diagnosis. Because it is so intermittent, I'm going to check all wiring connections to my wheel speed sensors and also see if something might need to be cleaned. Sometimes the most perplexing problems have the simplest solutions. I'm hoping anyway. Thanks again.
Actually, the check engine light is staying on, so the trouble code should be a direct read! Regardless, good luck.
How do I turn on the stablility control when it is off in my Vauxhall’s corsa
You didn't let on a year, but in a 2016 for instance, its in front of the shift lever. Note that it is on by default and may be off because of a problem...
brilliant explanation, I just got the stayed on light with car being shaky,5 mins from Edinburgh airport to park car and go on holiday for 11 days,so a worry when I comeback,I'm hoping my dacia duster has a esp button to fix this?or drive to nearest garage ,I got such a fright when it happened, its sorta ruining my holiday
If its "shaky", you'll need a garage. Hit a pot hole??
thanks alot for this helpful video..
My car is new rav4 2019 awd and when I go off road using awd system the light of traction control is flashing for seconds when the tires are slipping..
Is there aproblem here ?? hope u answer me
No problem at all. Working exactly as it is designed...
@@DashboardSymbols
Thank you so much my friend, I realy appreciate your efforts
You're welcome.
Hi
Nice video. Does the all time on icon has anything to do with the misaligned of the chassè ? Does one of the front ends of the chassè beams results in the traction sensor not properly engaging with the tire and causing the traction icon appears ? Is so would just balancing the wheels solve the problem ? Your answer is highly appreciated. Thanks
In short, yes. Bent frame components (if that is the issue) will be detected and the system will not function. So, the light stays on. Wheel balancing etc won't help.
@@DashboardSymbols
Thanks for your great reply .
Could it mean needing new tires?? Mone turns on during a right turn and then with jerk to the right during acceleration
So I have two stability control symbols apparently. I noticed it was on and remained solid while I was driving home. I decided to hit the stability control button thinking I had knocked it but then it had the same symbol with the word off attached to it. The other one also remained in place, which made two of them on at the same time. Both are the skidding car but one specifically says off and the other doesn’t. There is no flashing but it’s just constantly illuminated. Any ideas as to what could cause this?
Well, without intending to be trite, an actual problem with the system. However, the two lights sounds suspiciously like a Japanese branded product. Is the check engine light on as well?? If so, stability control will stay off (lights on) until the engine issue is resolved...
I have the same thing. My abs light is on and emergency break. Along with the warning stabilitrak off. I have a 2010 captiva. My dealership says i have to release 2 computers but it is like 4000 to replace it. Do u think they are right or it could be something simpler to replace.
Really impossible to say from afar. But by all means get a second opinion from another qualified shop. Always possible that something simpler could be at fault...
I got a 2013 Nissan June and had my starter replaced and this light came on along with the check engine light. Could you tell me what I should do
Have the check engine light dealt with. Stability control will stay off (light on) until then.
Should I drive In the rain with the traction control ? This morning I hydroplaned on the freeway and I’m so spooked trying to learn the most i can
Ok, please read this carefully. "...with the traction control?" YES! However, I think you mean with the traction control light on (which means the traction control is off). Then you CAN, but VERY carefully. Further, I am 99% sure you need to check your tires. Worn tires in the rain are worse than no traction control. Please check them or have them checked ASAP and drive carefully...
My service stabilitrat Ligth stay on, can't tune it off
Well, the light on all the time indicates a problem with the system. It is not functioning, so be careful in bad weather, etc. You will need a good mechanic.
Can a P03 (multipal engen misfire) code trigger the traction control light to come on? This is occurring on a 2010 Toyota Tacoma.
Yes. What you've said tells me the check engine light is on. So the trac or stab control is turned off (light on). It will be restored once the misfire is addressed...
Mine is coming on randomly. Even when sitting in park. Cleaned the speed censors and it seems to help it not happen as often but it is still doing it. Going to change the brakes (front & rear) and then go from there.
If the brakes need work, then yes. I doubt the light would come on while in park. Cleaning sensors was a great idea. Stay with it and let us know what happens! We'll pass it on...
2013 G37x - Mine stays on the entire drive every drive for some reason. Also the emergency brake light (red bold letters saying "BRAKE") comes on during and acceleration then will shut off again. Idk why that comes on even though the emergency brake is off.
There's a brake issue. Address it and the stab control will reactivate (and the light will go out).
I have a 2016 chrysler town & country. On several occasions the stability control light comes on at start up and won't let the shifter go into any gear. Any help it's appreciated.
Well, there is little that can be offered remotely, but I will say this. Any issue with stability control will NOT cause an issue with the transmission or anything else. I suspect that there is another warning light on as well. It will be the one that needs attention.
Hi, I have a 2014 Toyota Markx. I've changed both back tires recently and since then the *traction control* light came on (traction control not off) and won't go off. Do u think it messed wit the ABS sensor? What u suggest
?
Well, lets see. The simply act of changing tires wouldn't affect anything in the traction control. Reading between the lines, is it possible that the tires on the back are now a different size?? Then the sensors (not ASBS) would detect that those wheels are turning at an unexpected speed. Has the tire size been changed?
DashboardSymbols.com yes the tire size on the back has changed...thanks much
I don't know how to do this, but it MIGHT be possible to recalibrate the system. Good luck.
DashboardSymbols.com ok thanks much
Andre Beason the thread is different now. The front tires are worn down and you have new in the rear. Go get two new tires for the front. Same brand and design. All the tires need to be the same thread depth and thread design or the computer reads it if it is not. Do not mix and match tires.
Good evening! I have a 2000 Toyota Avalon XLS. I was hoping if you can help me out! I driving today and hit a bump that caused my car to bounce up and down. The vsc off light then came on. Do you know what would of caused that light to come on? I also have the vsc light on as well but I believe that comes and goes. I just recently purchased this car from the son of the only owner.
Sorry for the late reply. The light should not be randomly on. The system needs to be checked out and repaired...
Thank you so much for the explanation
You're welcome...
Mine came on for a little after being parked with my front left tire turned to the left sharp while parked. Is that okay?
Likely yes. One wheel likely slipped on the paint used as markings. Less traction available on paint. Keep an eye out and make sure you have good tread on the tires.
I have a 2008 GMC Acadia and my traction light just recently start coming on after driving it for a few miles. When the light comes on it seems to sputter when on the brakes as if I have gotten bad gas. Any suggestions
Well first, I can promise you its not gas. The symptom points to the brakes, which are an intimate part of traction control. Have them checked out (and DO mention the light!).
I just started having the same problem, only after tire rotation the brake light started illuminating with the stabilatrac light
mine to and it said service traction and service esc some one knows how much I will be spending on the service
This won't help at all, because it could run anywhere from $50 to $1,000. It needs a proper diagnosis...
I have a 2017 challenger, and the light came up, but the issue is that the wheel drags a bit to the left.. only when goin under 5mph anything higher it’s normal. Should I just take it to shop to make sure nothing is wrong
Absolutely yes. Sounds like a pot hole or curb bent something that will, at minimum, eventually cost you a tire. Or worse...
Thank you mine was flashing what I was doing some four-wheeling and I was a little worried because none of the stuff I looked up told me that it was going to do it just because it was working
Good. Glad to help. But do be sure you have good tires...
Will this light come on if the wheels need balancing?
Quite likely, yes.
Lett me ask you this, and I hope to get a good answer: I have Skode Octavia A5 2005, and this light comes up and it doesn't disappear, so the ESP warning light in the dashboard, that cause the brake light doesn't come up as this is an automatic car, and the surprise that the gear is stuck on Park, and never move.
Note: my car does not have a shift lock button to release the gear unfortunately.
What could be the problem here??
Note: that problem occurred RR days after changing the battery.
The oldest Skoda manual I have access to is from 2011, and the shift lock release is not a button, but is a lever hiding beneath a compartment in front of the shifter. There absolutely HAS to be something to get you out of park, and your manual will have the procedure. Start there -- I don NOT believe that the stability control system is controlling the shifter, BUT if there is a transmission problem, stability control will be off and the warning light on. Start with the transmission, and good luck!
Ok, did a little extra digging and found the manual for your car. First, though, I did NOT notice the line stating that the battery had been changed (don't know how to translate RR days). Anyway, unless the car was switched on when the battery was disconnected/installed, there should not be an issue. However, I would recommend making sure it was properly installed.
As to your manual, I too could NOT find a park release option. If you are on a hill, it could be jammed. It that case, have some friends push up hill will you try to shift the car. The fact that the ESP light is on suggests a deeper problem though.
Not much more I can do from here.
well first of all i'd really love to thank you for your fast reply, however, the thing is i finally found the release button, and no one can ever imagine where it is, but for your info, its under the transmission it self, you need to remove a plastic chrome piece under the transmission, and then you will find a yellow lever when you push it, it will release the transmission, however the car will be driven on a fixed speed and will not shift to the next speed.
And that depends on the problem where it's coming from on the first place, and in my situation, i was driving on the 3rd speed, and it's an Automatic car, and the RPM is between 35 and 40 and the car didn't move to the next speed.
And later on today, i went to the dealer, and found that the problem is with something under the Brake Pedal, am not sure how to translate it :D but i guess it can be something like stop controller or or stop machine, but it a small part that is not bigger than a finger. and it's under the brake pedal and this is how it looks like
www.mediafire.com/file/rmx2a9dczep7igp/7fc4d82d-9c5f-46ba-b5aa-124a83fd05e3.jpg
Once i changed it everything was cool and got back to normal and it was very cheap as well
and by the way, when it got broken, Cruise control, back brake lights, shifter, ABS, EPC completely stopped working
sorry for that long reply, but i wanted to provide you with the full info, you might be interested to know :)
Well, first thank you for the follow up. Great info, and good for you getting what you needed. I am not familiar with the part OR the transmission release! That had to come from a repair manual, and I am going to check mine for my 07 Audi (same company). I am left to wonder if somehow that 'controller' got damaged when the battery was changed, or the timing is simply a coincidence.
Time will tell if all this helps someone else in the future!
For me the light comes on for no reason and then loses power. I've been to a number of garages, but I don't know exactly what the problem is. Is there an issue with the sensor?
This has to be the check engine light not the stability control light yes?? And if both are on, deal with the engine light only!!
Hi! I have a Jeep Grand Cherokee 2014, when I made a slight right turn the ESC indicator light turned on and it started to shake and move weirdly. I didn’t know if I should have kept on going, so I turned it off and when I tried to turn it back on the brake was hard and it made some noise as if it had no fuel that it was struggling to turn on, and it was not able to turn it on. I’m not sure if this is an electric problem
It sounds like a brake problem, which is part of the stability system, but you'll definitely need a hands on diagnosis. And don't wait -- it's serious no matter the source...
@@DashboardSymbols okay thank you!
@@amyromero8249 Good luck...
I have a 2013 Nissan Altima and my traction light is on and it want go into gear or accelerate
The video discusses the normal appearance of the light. Your Nissan needs a proper fault diagnosis at a qualified service shop. It is not possible to diagnose remotely. Good luck!
My car is doing the same thing why could be the problem I have a 2011 lacrosse
Lashon.....wat fixed the problem?
That sounds like a transmission problem if it won’t accelerate or go into reverse
2008 chevy uplander . brakes went out , scanned , replaced front hubs/speed sensor . didn't fix . replaced master brake cylinder, fixed for 3 days . then all four calbors are sticking ?? What would that be???
Way too many possibilities and a diagnosis from afar is sure to be wrong. While I admire the initiative and tenacity needed to problem solve something like this, brakes are far too important. The best advice at this stage is to find a pro you trust.
DashboardSymbols.com thanks but yes I took it to 3 master mechanics also dealer no one seen this problem before . replaced 3 master cylinders ? Brakes wont decompress now?? But remember started by loosing brakes . pedal went soft plus. Master cylinder was leaking ! Now brakes won't decompress. We have scanned this thing over 5 × by different shops ?? First guy said front hub . speed sensor. So 300$ later still no brakes .then took it to my mechanic replaced master cylinder ..... Fixed for 2 days then started sticking replacement was leaking so replaced again ! Stuck calibers then replaced 3rd time all four stuck.? Any other trouble shooting would be helpful ? Only thing I haven't or anyone else has checked was if the brake lines may have collapsed from New master cylinder?? I'm not abel to check till Monday ??
Wow Josh, this one has you by the short hairs. You've done the right things, getting help and all, and most curious that the dealer couldn't fix it. As to brake lines, they are metal and will leak before collapsing. One idea -- the abs control module.
I have tralblazer 2006 and it stays on it also has the same light but with a wench..
There are two things telling you the system needs service. Any warning light with a wrench in it says this, and you have it. Plus, the light stays on. With stability control, this is always an indicator or a system problem. It needs hands on diagnosis. Any damage done recently? Accident, BIG pothole, or??
Why do they come on and stay on with Automatic AT transaxle light on and both stays on car is all over the road. and won't go In gears and bogs down
Ok, this is a transmission problem, and a serious one from what you've written. Please have it looked at as soon as possible! The transmission issue automatically shuts down the stability control system, which is why its light is on. Stability control will be restored when the transmission is repaired. Good luck!
What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
They should indeed, as a test. I'm afraid that only a hands on check can resolve the problem...
I have a 2014 impala the stability track light comes on and engine reduced speed is on the dash as well as check engine it stay on for days on in then goes off and the check engine light is left on for a few days then it goes off and everything stays off for a week or two then starts all over again
This is ALL about an engine problem and it needs a hands-on diagnosis. Once the reason the check engine light comes on is properly addressed, all else will be resolved...
I have the EPS and ESC lights on and my steering wheel is locked. I just drove my car to the store, when i came back out they were on. I have slight low pressure in some of my tires. Could this be why?
Ok, lots to unpack. Low tire pressure is not the issue. If your steering wheel is locked, THAT has to be the first concern. I'm not sure if the car is running, but it 'feels' to me like it's not. True??
DashboardSymbols.com thank you for the quick response. The car is running fine. It is just very difficult to turn my steering wheel
Ok, so the car is running, and the steering works (NOT locked) but works hard. If I now have this right, there is a serious steering problem, AND I'm am just realizing that EPS is Electric Power Steering!!!!!!! So, there are only two things you can do. With an electrical issue in today's cars, sometimes a re-start of the car will reset it. BUT, I think you've done that. So, the other is to check fuses. Maybe you'll get lucky. ESC will resolve once the steering is working.
If it comes on by it self and I can’t turn it off unless I turn off the engine. Is that normal?
Absolutely NOT normal. The light on steadily indicates a problem with the stability control system that will need a good service shop.
I have a 2011 Chevy avalanche and this randomly pops up when i go over 30mph and struggles to get into 6th gear when on the highway. I had a mechanic look at it and replaced my spark plugs and gas pump because he said fuel pressure wasnt consistent. But even after that my truck still has the lights coming on
You're saying lights, so I imagine the Check Engine light is one of them. You need s proper diagnosis from a top notch mechanic. You may not like it, but a Chevy dealer with a good reputation would be the way to go...
@@DashboardSymbols Yeah thats what i was thinking too since the mechanic i went to works out of his garage but i live right next to a chevy dealer and also a reputable repair shop so ill give those a try. Thank you
@@christianmendez8321 Good. The work you described would have resolved problems seen at ALL speeds/rpms. Good luck. (in case it isn't obvious, the stability control will resolve once the engine problem is resolved)
2013 Mustang - the light came on as I was traveling about 60mph. I felt like the steering wheel and brake system were shaking. Like pulsating at that speed. ....is that normal? It only happens occasionally, but still scary.
Ah, no! Please have the car checked out asap.
Jerome Carlton do you have bigger tires in the rear and smaller tires in the front?
@@noellopez9159 i do on my 2011 and it did that shit today man will i was about to turn i need to work in the morning man i drive pretty far away thats the only car i have at the moment i hope i dont fucking crash and die
@@charlyBrown7 drive on the slow lane, and get them the same size asap.
@@noellopez9159 funny honestly i thought you werent going to reply man it been years since your comment thanks man i kinda needed some sort of motivation to keep going man life has been pretty shit lately. When ever i have the enough money ill change them man thank you i wish you the best brother
Hi I have bigger tires in the rear of my 2011 Kia optima and when I drive past 65mpg the traction control light comes on...do you think it might be because I have bigger tires in the rear. Fronts are 225/45R18 and rears are 235/50R18
There's a VERY easy and short answer to this. Yes. And to my understanding, there is nothing you can do other than return to the original tire size. The stability control is not available to help control the car when that light comes on. (I am assuming it is on, not flashing, indicating that the system is off.)
DashboardSymbols.com thanks! Yeah that's what I'm doing this morning. Changing them to the same size tires.
You're welcome...
DashboardSymbols.com i have another question now that I put on the tires of the same size I noticed the traction control light doesn't pop up anymore but now i feel like my car lost power and the car idles on its own when I'm on a full stop (parked)... what should i do..please help..
Well, first, "the car idles on its own" sounds completely normal, so I'm sure I'm missing your point. And second, the car may "feel" like its lost power because the tires are smaller, but I can assure you this is only an illusion. It has the same power it did before the tire change.
This flashed up on my car yesterday, a day after a crash on the drivers side. But it was accompanied with a strange engine noise and vibration. I pulled over and then carried on after five minutes and all was fine again. But the whirring noise from the engine is still a problem. Any idea what this could be? The steering wheel is also around 30 degrees to the left, even though the car is driving straight and so is not aligned.
Wow, well given the fact that there has been an accident, the only help will come from a service shop. Your steering, and everything associated with it, is damaged. That includes the Stability Control system.
Yes however did this safety shet should be castrated
Will this light come on if back breaks are bad ?
Could very well. But regardless, fix your brakes!!!
I had the flickering of the stability control light and I couldn’t accelerate for a second so I pulled over and it kinda went away but comes back when I press on my brakes too hard.
Have the tires and brakes checked...
Mines says it is "off" but when I press the button to turn it on again nothing happens! Do you think there is a fault with the on-off button?
Not very likely. Far more likely a fault in the system.
I know ! The traction control is to rob you off the money!
I was in grass and i went to pull out on the road, my stability light came on and once i was on the road it went off and never turned back on. So that means it was working properly?
Exactly right! Grass is slippery and your tires likely spun a little or wanted to. Stability control took over and kept you on the straight and narrow.
The ESC light stays on because it's a more serious issue for the stability control to be activating than the ABS. My GM car from 2009 actually has a 2 stage stability control light. It flashes if the system has to intervene lightly, but if it steps in heavily, it will flash AND beep.
Agreed, but I maintain that at that moment, a driver's eyes belong on the road, not distracted by the light. BTW, NHTSA's own research found that an audible alert was a greater distraction and recommended against its use. It also found the light was indeed distracting, but as much. Manufacturers were given the choice, and as far as we are concerned, chose badly...
@@DashboardSymbols I'm not defending the manufacturers at all. It was their thinking that led to the proliferation of stop/start systems.
I changed break pads and outer tire rod then the light was on after changed everything, so could you tell me whats going on ? Why is on now ?
First, its possible a sensor was disconnected or damaged during the repairs. Second, was the car aligned after the tie rod was replaced?? If not, that's the problem!! If yes, then you used a repair shop (sounded like you did this on your own) and they should have a look at their work...
Mine flickered on my Pacifica when I started to skid and after correcting the skid by letting off the brake or whatever I, as the driver needed to do on my part, it would stop flickering which let me know, and I could feel, I was now fine. I don't think people really believe it means anything more than what it really means..that the car is engaging stability control and helping you to become safe quickly. In my Pacifica, it's simply referred to Traction Control with the same symbol of a skidding car as the button- meaning turn it on to avoid skids, not turn it on and you WILL skid now! Who would think an auto manufacturer purposely installed a button that when pressed will make you start skidding out of control to purposely kill you? LOL.
I drive a Hyundai now and it is always engaged which makes me feel even more safe opposed to realizing I forgot to turn it on after I felt I was starting to skid. Cars can slip just as easily is rain, on gravel in the summer in bright sunlight, and on leaves or other debris in the road. I don't get why anyone would want to turn it off! I would also add that you should never turn it OFF while it is actively controlling or correcting your steering because it can cause your car to go crazy and then you WILL be driving out of control.
That last sentence it truly important. Do not turn Stability Control off while it is doing its job!
Should I get a new TCM to fix this issue?
If the problem runs that deep, it will need a proper diagnosis before that question could be answered.
My stability control comes on whether its wet or dry then the car automatic slows down and I have to break Then Car will Go. What would cause that? Abs sensor was shown bad replaced it and still shows need replacing and car still does same thing.
Not enough to go on here, but I'm going to guess that the check engine light is also on and an engine issue needs to ne diagnosed and addressed. Nothing else would slow down the car...
Im having trouble with my 2016 ford ranger. The lights popups randomly then car brakes suddenly. Need to stop the engine to turn off the light, otherwise car will almost brakes everytime when i exceed certain speed. Been to several mechanics but all have same answer, checked the system with no faulty sensor, nothing unusual. I even changed the tyres to a new one and did an allignment but the problem is still there. Any advice?
Yes! Find better mechanics! If I understand correctly, the truck is braking on its own, yes? THAT needs to be the focus. Fix the brakes (have u seen an ABS light??)...
HI
MY son got a CORSA and light come on but we can`t find a button on dash board, Is anywhere else in system that we can turn light off. Thank you.
Sorry to say that I have little familiarity with Opel products. I would say however, the light likely means a service is needed. The light never has a shut off. The system does.
@@DashboardSymbols Thank you very much.
mine came on when i took off at a light while making a left turn i might have took off to fast i just got a used Jeep Sahara and when lights come on i think it's bad.
Ah yes. If you were in an intersection, they are criss crossed with painted lines for crosswalks etc. The paint itself is slippery and a wheel under power can easily slip on the paint or a wheel can slip by simply taking off too fast. The stability control system will activate for a moment and the light will come on. Again, a warning light pointlessly flashing when the car is doing its job leaving the driver to wonder if there is a problem with the car. There is not...
@@DashboardSymbols This literally what just happened to me twice in the last 3 days out of the 10 yrs I've had my Jeep Patriot which has brought me here. Thank you 🙏🙏🙏
@@KayFlowidity This vid (czcams.com/video/ovRK8cEJsvA/video.html) will help you put a new battery in the key fob...
@@DashboardSymbols Why do I need a new battery for my Key fob for my ESP? Was this reply intended for another comment thread?
@@KayFlowidity Yes, sorry, quite likely. The mobile app doesn't always behave like it should. Have to do some digging.,,
I have a 2011 Ford Fusion and my ABS light along with the traction stability light came on yesterday while driving on the interstate. I also had a message pop up saying ‘Service Advancetrac’. I was going around 80 mph at the time. I slowed down a bit to see if that helped. Any ideas?
Yes. Chances are this is an ABS problem first. The Advancetrac (stability control actually) needs the brakes functioning properly to work. So, repairing the ABS will take care of the stability control. Start with the ABS.
DashboardSymbols.com Is it still safe to drive?
While both ABS and stability control are important safety systems, they kick in in more extreme conditions -- slippery, hard turns, hard stops, slippery etc. Your brakes will work normally though and it is safe to drive in 'normal' conditions. Never know when something out of the ordinary can happen, so be extra careful.
DashboardSymbols.com ah ok. thanks so much. I was just wondering if it was ok for the time being until I can get it checked out. The lights went off after I reached my destination and turned the car off/on again.
If they stay off, it may have been an electrical anomaly and all will be well. I f you see them again, it will be time for help. Good luck!
My 2011 Mitsubishi lancer traction controll turns off on it's own and can't turn it on unless I restart the car also my cruise control stopped working too idk if they have anything to do with one another? Any help much appreciated!
An interesting question not asked before. So its not so much that the cruise control is the issue. What caused the cruise control failure likely is. Its not much help, but diagnose the cruise control problem and the other will likely resolve.
3500 GMC Denali, lifted 6 inches , stability control light comes on aftermarket wheels and tires. I want to get rid of this light please help!
Sorry Mel. The stability control is dependent on the truck's original configuration. Making it work again is not in our bag of tricks and we would not recommend modifications of this type in the electronics era. Do you really want to go without stability control?
DashboardSymbols.com
first Thank you for taking the time to respond, but I was hoping you can guide in the right direction to on what to do. I do not want go without it, and I'm .ore worried if is going to cause a bigger headache if I do t repair now!
The headache exists and the only advice I can offer is to contact a GMC dealer. I truly doubt that the system can be reconfigured to work, and if that's the case, the light stays on. Good luck...
DashboardSymbols.com
I saw this light briefly flash at me when i made a right turn up a hill that looks like it wasn’t paved evenly at some parts on the corner. So this light is normal to go on like that ? It’s basically just a small annoying warning? I wasn’t even driving that fast at all Around the corner too. It’s that sensitive? Now when I turn on the car that light isn’t on. If it was stuck on then I know there’s a deeper issue but there are no lights on my dashboard right now. The ABS light didn’t go off the same time this traction light went off.
Honestly, yes, just an annoying light seen when a wheel slips. I would caution only to make sure your tires are good -- they'll slip more as they wear...
I have a 2004 chevy express my stability light stay on when i drive couple miles on the road.
When i turn off engine it will reset and eluminate again after miles of driving. Need your help thanks.
What u actually need is a good mechanic. Assuming the light is on alone, there is a failure in one of many systems involved. Find someone u trust!!
Hi, i have a audi a4 2006 and the light come on but the ESP bottom don't do anything? Any easy way to fix that ?? Thanks. Good video
Well, on that car, the button simply turns off the ESP which then turns the light on. So nothing to be gained using the button, and likely no easy fix. Someone will need to do a hands-on diagnosis. But first, are there ANY other lights on??
@@DashboardSymbols Yes the air bag light it's on that's all
Ok. Likely an electrical problem. Start with the fuses, but don't expect much. The buttons for both are close together, so maybe the switches themselves. Find a good garage... both are very important systems!!
@@DashboardSymbols Ok, thanks
my mercedes benz E350 2006 model- whenever the ESP lights shows on the dashboard, the car will stop acceleration? please whats the cause and possible solution.
Is there another light on as well? ESP should not impact the engine.
no. only ESP shows and the car will no longer accelerate?
Sorry, not something we've seen. You'll need a good mechanic. Good luck!
Will I still pass inspection with this light on or no?
It depends very much on the state, but it is possible, unless there is an obvious and serious problem with the brakes. Also, that light is often on because of a check engine light, in which case it won't pass. Don't take the chance -- repair the issue, whatever it is...
When the light popped up the car felt like it was going to turn off. Does anyone know if that's supposed to happen when it comes on??
That's NOT supposed to happen. Sounds more like an engine issue and likely as not the check engine light is or was on as well...
My nissan note engine light is on and power lag issue..scanned the vehicle and find cam shaft and turbo charger,peddal sensors issue.. and we changed camshft sensor still the same.. while i drive in slopes or hill lag of power and traction control lights also came on.. not identified in garage plz advise
Sorry, this needs a hands on diagnosis. If you didn't use a dealership to do the scan, that's the way to go. We all have trust issues with them, but they have the experience. In the meantime, continue to search CZcams for the SPECIFIC symptoms. Also, any vacuum leaks??
Yeah my mazda 6 2016 sport just had the engine came on wit that lil light also. It's snowin here. Car slowed down. I stopped and parked light went out but now my engine is still on
Again it's snowin the light wasn't flicking it was solid then went out and didn't come on my car was slippin alil n was gave it to much gas to accelerate
Engine issue only. Get it resolved and all will be well...
I have a 2005 audi a6 quattro 3.2s, my traction light control is on and it won’t diasappear, how do I turn it off?
You don't. If there is no other warning light, the system needs to be serviced. Otherwise, the system may be turned off. If you hit the button on the dash to turn it on, the light will go out. Any accidents recently? Even hitting a pothole can knock things out of whack...
I have a 2017 Dodge Charger. It was running fine I have not had any warning lights come on. I stepped into the store the car would not start. This locked in park now and won’t move. I’ve reset the battery but I don’t know what could have caused it to not start. It turns on but does not start if that makes sense
Interesting video you found under the circumstances. Anyway, turns on, but does not start suggests there is power but the engine is not turning over, yes? I can only speculate, but at first blush, make absolutely sure that the transmission really is in park and try again. Otherwise, a hands-on diagnosis will be necessary. Best of luck...
I can’t find the esc thing on my 2018 rolls Royce Ghost any idea where it is
quite possibly at the dealership, with the car
Sorry, but we simply don't have access to owner's manuals for Rolls models. The best speculation is that it might be in a screen menu. Rolls SHOULD leave an owner the opportunity to turn it off when needed, but that's not a guarantee.
🤣🤣😂😂👌👌
Take it back to best buy tell them to exchange it for a hot wheels ferrari that one is bad....😁😂
My 2016 Dodge Charger have service electronic stability control , and some times it won’t let me accelerate , and some times it will
Time for a hands on diagnosis by a good mechanic...
Do any of you happen to know why the check engine light AND the traction light illuminate? The check engine light indicates P0344 (camshaft position sensor) and I have replaced it along with the crankshaft position sensor. PCM has been replaced, relearned, and reprogrammed as well.
The stability control light is on because it is shut off. Address the engine problem. I am posting a new video tomorrow addressing this very thing. Very good question.
@Texas Boomslang you fix your car? I have one Hyundai Elantra 2017 I have the same code in my car I change crankshaft, coils, spark plugs, clean transmission....but every time if i try drive my traction light illuminate and my car stop.
@@brunosantana5059 I wound up replacing the coolant temperature sensor and I didn't have any more issues. The same solution may not apply to your hyandai as my dodge which i no longer drive. I totaled it by pulling out in front of someone and ended up getting a Silverado. Overall, i think that it's a glitch that originates from any of your sensors. I hope you can get your ride acting right, bro.
@@TX_BoomSlang thanks bro
I have one Hyundai Elantra 2017 I have the code P0014, P0017 and P0335 in my car I change crankshaft, coils, spark plugs, clean transmission....but every time if i try drive my traction light illuminate and my car stop.
Wow. A lot unpack. First, the traction control light is not relevant. Clearly an engine issue, so the check engine light is on too, yes?? Or an EPC (power control) light? Resolve this and the other goes away. Frankly, it sounds electrical -- a relay somewhere, but trust your dealer to be able to figure this out! They know the product best...
2016 ram 1500 6cyl. Need new tires badly, traction light stays on 48mph max speed high rpms?? Help please??
Likely the only help needed is the tires you already know about. Why delay? Do what's necessary!
My mom's 2014 dodge avenger traction control light stays on and her electronic throttle body light comes on throwing it in limp mode hopefully changing the throttle body will fix the light's.
Can't verify a diagnosis from here, but its clear that stability control will remain disabled (light on) until the engine issue is fixed. Best of luck...
I have a 2012 Chrysler T&C after half and hour i drive, light turns ON and stay like that all the time the car is on if the van is off like 2 or 3 hours light goes OFF again.
Impossible to say. Clearly something that needs a hands on diagnosis. So long as that light stays on, the benefit of stability control is unavailable.
I have an 06 explorer with the check engine light on. Recently the traction light came on and wouldnt go more than 55. Turned it on later that day and the light was off. The next day it was on again and the truck started to shake as if the wheels were about to lock. What could be the cause of this?
Address the check engine light. Without a hands on diagnosis, my best guess is that the stability control issues will resolve once the engine is repaired.
Nayeli Perez did you solve the issue I have the same problems but with a chevy Cruze 14 😞
@@minervagarate1251 He may not answer, but likely as not you need to have the emission system checked. The stability control will stay off (and the light on) until the engine is fixed.
Well we took it to the mecanic bought two coils, something like that. He knew which ones needed replaced so he changed them out the light hasnt turned on since
@@nayeliperez8935 Excellent. Thanks for the update!
Hi I've got 2012 jetta 6 it displayed stability control, ABS and steering one please help me
Likely as not an ABS problem at the root of it. You'll need a hands-on diagnosis to confirm...
I have a 2012 nissan sentra the light turned on and rpms won't go over 2,000 second time this happened changed my transmission fluid and it went away car drove fine till it came back on again 4 months later any thoughts?
I do, but they may not help much.
I honestly don't believe that changing the trans fluid made any difference, which suggests a temporary issue that may be repeating now. Were there any other lights on then, or now??
@@DashboardSymbols no other light has came up but the light does not flicker stays on the dash solid.
The bottom line here is there will need to be a hands on diagnosis done by a qualified shop. I have not seen a case where the stability control light alone was activated while a vehicle was RPM limited. What you may be looking at is the Check Engine light, not the stability control light. Regardless, get it checked out. Good luck.
mine is on all the time on my 2005 audi a5 ! for months now! is it a sencer problem??
Well, assuming isn't simply turned off (dash switch) and that the check engine light is not on too, there's no way to say without a hands-on diagnosis. Find a good tech...
@@DashboardSymbols would a code show up on a diagnosis machine?
@@catscantfly Might. Might not. And if it does, it may not be definitive. Way too many possibilities. Sorry, not something easily diagnosed...
I purchased a used Toyota solara and the trac control light turns on and starts beeping. the brakes will also occasionally pump. I don’t know how to fix this do you have any idea what this could be?
Have the brakes looked at very very soon...
I have a 2013 focus se in which the light stayed on. Stability control I believe it reads when I turn the car on any idea?
Well, first, make sure it isn't simply turned off (check the manual). Second, is there another light on?? If yes, start there. Finally, has anything changed? Hit a pot hole? A curb? etc...
@@DashboardSymbols ok thank you much appreciated 🙏
@@joec9739 Good luck with it...
Mine flashes intermittent when switched off. Flashes fast if wheels spin. I’m assuming flashing intermittent and not permanently on Just means that’s how it is for my car? Some permanent on. Some flash intermittent?
The light WILL flash if the wheels slip. Absolutely normal. However, it soumds like you are getting a lot of slipping, which itself is not normal, unless you like to squeel the tires. Are the tires good, or badly worn???
DashboardSymbols.com no slipping no wheel spinning. Not understood my concern really so here goes again. Switch it off. The light flashes fast if I spin the wheels which is correct. If I drive slowly or fast 5mph or 50mph it flashes intermittent. No spinning involved. Tread of tyres are legal. The intermittent is like its saying it’s on. Maybe an update from steady on. It flashes slowly to let you know ESP is off? B6 Passat.
Ok, yes, if its turned off, there is a system issue. The light would simply stay on to indicate that the system is off. You will need a technician to do a hands on check.
DashboardSymbols.com thanks. I have VCDS and it shows no faults. Could be a common sensor fault then that fault finding doesn’t pick up.
I have a 2006 Chevy equinox my abs and tc lights stay on and when I go to put my foot on my break to stop there's a grabbing noice like I'm not going to stop but it does but why is the breaks making the noise. And my abs and tc lights staying on
tina pointer Get to a repair shop asap! Your brakes are very likely worn to the metal, and if so it's very dangerous. Someone needs to check it out, again, asap!
So I have a 2012 Toyota Tacoma and the traction control light has been on for quite a while meaning traction control is off but it doesn’t let me turn it back on to get rid of the light on the dash, someone reversed and hit my passenger side messing up my wheel more then anything I got all the parts replaced including the wheel the frame around the engine bay was all straighten out but my steering wheel needs and alignment it’s angled to the left even though I’m going straight could that be the problem? Or what do you recommend I do? Luckily I live in California so no snow or really any heavy rain
I also have the tire pressure light on but all tires have been checked on pressure including the spare so I’m assuming that’s just a bad pressure sensor right?
My truck also did pass the smog check here in California with both those lights on so everything todo under the hood is in good shape
Yes, poor alignment won't allow TC to operate. And it will wear out your tires fast too...
I have a 2008 impala lt traction control came on and it said service traction control engine light comes on but then turns off and after driving a little bit the traction light turns of but when in idle it stutters I bit
Well, you are well into problem territory that will take a hand on diagnosis. Find a good tech!
Narciso Alix air filter plugs fuel injector cleaner!!! Start with this!!! If you don’t eventually you will get a reduce engine!!
Hi I have a holden cruze cdx, my stability light, abs and tc light is on & wont turn off it came on randomly while I was driving
This is likely an ABS issue. Once you have it resolved, the stability and traction control will reactivate. Have a good tech check it out, and drive careful in the meantime...
Be careful you need to get that fix I just had and accident las week
@@vicvijuarez Good advice. Hope you're ok.
I have same promblem and my car doesnot move forward while it shows tc on my screen.
@@surajbhandari5844 Clearly need to find good, solid hands on help. Best of luck...
So I went to the store today and I made a right turn and the DBC downhill brake control light and the ESP electronic stability programme both turned on. When I try to put the car in park it wouldn't shift into park only drive and neutral. So I pressed the release button so I can put the car in park and I shut the car off. Now I cant turn my car on. All the lights come on but the car wont fully turn on. What could be happening? What should I do?
What release button did you press? Also, what is the make, model and year?
Did you work it out??
I have a 2017 equinox. My Traction Light and Stabili Track Light came on yesterday. Felt like a rubber band pull first, then the Traction Light and Stabili Track. It drove home fine but I parked it. I need help with this.
And it will need to be hands-on help and diagnostics. it "feels" like a steering problem, but truly not possible to properly diagnose from a distance...
@@DashboardSymbols not a steering problem. It might be my engine correct but the light isn't on.
@@flyGUySM0kE The check engine light should be on, and since it isn't likely not. Please do find a good tech to check it out. Good luck!!
Ok. Help! My engine lights along with the traction light both turned on and has been on for about a week. Pretty much worried. It was after going up a hill of snow. How to turn off? It's not that bottom to the left. Tried it
Ok, well, likely as not the traction light is on because the check engine light is on. Take care of the engine problem, and the traction control will be available again and the light will go out. As to the check engine light, there is only ONE thing the driver can look into. Make sure your gas cap is tight. If its loose, tighten it and the lights will resolve in a few minutes of driving. If its already tight, you will need the help of a qualified repair shop. Don't wait!
Ok, so I have a 2017 Chevy Malibu and my check engine light has been on like forever! On Yesterday I was driving home and the Stabilitrak light, ABS, Battery light, drive with care; came on while I was sitting at a red light in turning lane! Then the traffic light turned green and I couldn’t go! The car stalled on me in the turning lane! Bummer! I’ve gotten an email from Chevy about the emissions system! I’ve taken my car to the dealership once before about the car reduced speed out of nowhere in the past. They say they couldn’t service it at the time!🥺😔 I don’t know what to do! Any suggestions; what are your thoughts on this?
Well, nothing that will be much help. Although I can say that the stability control light can be ignored. There's a serious engine/emissions problem that needs to be dealt with, period! The other lights will go away once the engine is taken care of. The car has turned off the stability control because it can't trust signals coming from the engine. The other lights/messages are responding to no power.
A really good tech is needed and evidently not at your dealership, sadly (warranty???). No way to diagnose from a distance. Good luck!
Thanks for responding! And yes, everything is still under warranty as to why they probably keep ignoring me!
@@ArtSeeFriend Wow, well they HAVE to help you! HAVE to! Or another Chevy dealer!
It’s known that the intake bolts are loose and need to be retourque! Many will put a scare to you but you will be taken just retourque the bolts only like 6-8 of them
Hello, I have a 2012 Nissan rogue and my traction light comes on every once in a while. When it does come on, my car starts jerking and will sometimes cut off. When I cut it off and start it back up, my car will sometimes be hesitant to start up and the traction light comes back on. Do you have any idea what that can be ?
I've changed my tires and it would still come back on.
Is it the only light on??
@@DashboardSymbols no my engine sometimes comes on then stays off.
@@thehacker4089 Actually sounds like an engine issue that needs to be addressed. The traction control will stay off (light on) until then.
@@DashboardSymbols okay thank you so much.