Why are stability control, steering (wheel) and check engine lights all on at the same time?
Vložit
- čas přidán 3. 07. 2024
- We've covered stability control lights in a number of ways on the web and on video, but we continue to hear from drivers who are seeing one of these warning light variations, but alongside other warning lights. And this multiple light phenomenon is what we'll cover here. Why are stability control, steering (wheel) and check engine lights all on at the same time?
So, if you in fact have more than one light on the instrument panel, continue on. But, if you have seen the slip or stability control light on its own, click the link supplied early on in he video.
For more videos and information on automotive warning lights and push-button start cars, check our channel here on CZcams or go to DashboardSymbols.com.
If we helped you and you see the "Thanks" button below the video, please lend your support to our efforts.
#Stability #esc
-------------------------------------------------------------------
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true. - Auta a dopravní prostředky
Awesome! Super helpful. On way to work and freaking out about how screwed my Monday will be dealing w this. Pulled over, watch this video, checked the gas cap and it was dangling off! This morning at work will still suck but not because of the car! Thx!
Glad to help...
Thank you for being so simple. This actually helped so much.
That's the plan. You're welcome...
You have no idea how much of a relief this video is! I've got a 2012 Scion XB and out of nowhere it started running badly and the check engine light and slip indicator was on too. I took it to a shop that said the number 3 cylinder is misfiring. I bought all new spark plugs and ignition coils and will install them tomorrow. I sure do hope that fixes all the issues. They had said the slip indicator was from possibly a faulty ABS sensor, but I think it's more what you say: that the engine running bad is messing it up. Again, thanks for the great info!!!
Should do the trick! Let us know...
Did it fix the problem?
THANK YOU for this very detailed information. I got all three of the lights on the night before I hosted a party for 45 at my home. Not having a car was not super helpful and I needed more information. Safely used the car for a 5 mile errand, hosted the event, care to the shop the next day!
Glad to help and glad you're being cautious. Not a good time for a problem, yes? Not that there ever is...
I was encountered with the engine and stability control of my 2012 Toyota Camry lights on yesterday. I tried to fixed it by myself and watched several CZcams videos. Most of them gave me wrong information or solutions. Lucky i watched your video and convinced by the way you presented. So, I run bdm and found out that the cause was from the spark plugs, So I bought from auto zone and changed it. walla ! Problem solved! One thing I would suggest other people watching your CZcams is that, they have to erase or maybe wait for a while before the light go away. For me after I changed the spark plugs the reader showed me that there is an electrical coil problem, however, after I erased the reading , somehow the light vanished. Thank you so much you saved one soul after 4 years you posted your video. 😅
So first, glad to help. Second, good work too. And finally, don't be totally surprised to find there really is a coil problem (and the lights come back). More common than plugs and the new ones may mask a weak coil...
Great info. Thanks a million.
You're welcome...
Excellent video, thank you.
Thanks and hope it helped...
You saved me! Fantastic!
Glad to help...
I found you and you're so helpful.I have a lexus ES350 2008 and the VSC and engine light on and of .Tomorrow I am going to buy the gas cap and see what happens.
Let us know what happens. We may be able to advise going forward...
Thank you for the information
You're welcome...
I'm glad they have these videos for when people including myself go into panic mode😂😅
Pretty much the idea...
It worked. Thanks.
Perfect...
Thank you for this video. My 2008 Toyota Highlander is "sick" and needs it's rear electrical components fixed. YIKES! Over a thousand dollars to fix, but the car is still a baby at 145,000 miles. I was just going to ignore it, but you emphasized having it checked out so I did. Not happy about the repair cost but better than buying a new car as a result of ignoring the warning lights.
145,000 miles is great service regardless of what it needs, but a some TLC is warranted. And happy to have helped...
Ohhh you dear helped big with my problem thank you so much.
Glad to help...
Thank you very helpful
Glad to help...
Awesome a lot of help thank you so much
You're welcome. Do make sure your tires are good...
@@DashboardSymbols yes thanks
Good Video...Learned A lot 😊
Good to hear...
Awesome
One way or another am subscribing
Thanks...
@@DashboardSymbols thank you🌱😀✌
Hey, appreciate all the good info. I have a 2005 Toyota crown v6 (215hp) RHD, vehicle drive great for a bit when I bought it, then one day out of the blue I get a check engine light, followed by a VCS. Thinking it was something like an O2 sensor, wanted to do a quick check with a diagnostic, hooked in and set off a power steering light P/S. Now thinking I just set off a chain reaction. Steering was perfect one second, then tight a second later, no ps leaks or anything. Maybe an electrical issue? Would appreciate your thoughts
Not so much a chain reaction. Everything hinges on proper engine operation. All else then resolves. You're likely at the point of needing a Toyota dealer. Sorry, but they know the machine best...
Most helpful, thanks! I have a Honda CRV 2014. The steering wheel light, slidy light, engine light, and tire pressure light came on but drives good. I have repairs happening on the sixth of April (got in a minor accident in January finally can fix it). Can I wait till then or get it in sooner at a different place just to check it first?
Given the accident, I would not recommend driving it. Too many possibilities and likely the result of the accident. Stay safe...
What was the issue?
@@alleninda912 I dont rightly remember but I needed some new wheel stuff and a new belt of some kind... It was expensive but I was told I was lucky I made it that long and not fallen apart on the road and been in a major crash. It was in the shop for three days.
What was ur issue with the car i have the same problem
I had a engine light come on last week, Garage diagnosed and cleaned EGR valve and no engine light anymore, but after 3 days got the stability control on. No problems for 6 years and now suddenly 2 different problem in 5 days. Car is Chevrolet Orlando Auto Diesel in UK. The garage has tried to recalibrate/reprogram SWASM(Steering Wheel Angle Sensor Module) but stability control light is still on. He says we may need to order this part itself again online. Could something else be causing this ?
First, sorry, this question was not visible earlier. And yes, of course something else could cause the light to be on. Feels like something is missing. Assuming it is not simply turned off, has the car hit a curb or pothole recently??
After a oil change and about 5 miles my check engine light and vehicle stability control system turns on and I cannot accelerate past 40 mph. Before this my car was fine. What does this sound like to you?
Certainly an engine issue. Its tempting to blame the oil change (DO check the oil!!), but cannot say for sure. You'll need a good tech soon as possible...
Wow am just watching this and I have the same issues on my 2012 Nissan Maxima last am on the highway when the stability light comes up and I can accelerate past 30-40 mph. I managed to drive to my mechanic and he say the airflow on the air filter so I change that that was this past Saturday and this afternoon on my way home the light came back on but I was like 3 minutes away from the mechanic shop so one of his boys checked it out and clean all the light and the car was fine too I drive home and tonight I start up the car and the engine light come up and I try to drive also the stability light also shows up I just park the car. So am this of taking the car to a different mechanic but did u have any idea of what is wrong.
Thanks so much for posting this. I just had my 2011 Toyota Tacoma in to have the front rotors turned 2 days ago, and this morning the chk engine and slip indicator came on. Don't know if this was a coincidence but went and checked the gas cap and was able to tighten it by a click or two. Since then I had stopped for gas, then drove 70 mi and the indicators were still lit at present. I'm wondering if the system needs longer to reset itself or perhaps do I need to disconnect the battery for a few minutes to reset before purchasing a new gas cap? Thank again.
So first, no, it does not need longer to reset if the cap was loose. Second, you can disconnect the battery and hope for a reset, but it would be more expedient to have someone diagnose the engine problem...
@@DashboardSymbols Just went and had a scan at O'Reilly's and it was the gas cap...replaced w/ new. Indicator light cleared within a couple of seconds! Thanks again for your reply. Much appreciated!👍😀
@@rmguest Ha! The cap itself. Not unheard of but rare. Glad it was a simple fix...
Thank you. I had check engine , tpms and traction control lights on
TPMS is odd with this, so make sure your tire pressures are good. Otherwise, hope it was helpful...
I'm currently dealing with this exact combination.
@@mendez2753 Start at the engine...
My friend suggested the battery made my mass air sensor go out. Changed the two, now I’m good to go! Thank you for your help.
@@emcladybug22 Great! Glad you're up and running. Great tip too...
Can bad brakes cause these two lighta to come on ?
I have a question!!! I got a flat and got it fixed. My tire pressure light had already been on the dash. but the moment I got my flat tire changed, the traction control light came on and check engine. I had my O2 sensor changed, and I had a diagnosis, the mechanic said only thing that pops up is my catalytic converter. So after he changed my O2 sensor he reset the codes and next day after I drove home from work all the lights came back on? Do u know what this could be? Btw I have a 2011 Toyota Camry xle
Well, first its likely none of this has anything to do with the flat tire. No impact on the engine light, which is in control. Simply no way to diagnose from afar -- many, many, many possibilities. I would however, make sure the gas cap is tight and if it is, find a new mechanic to make sure you get a good diagnosis...
A couple days after my oil change i have the ESP error popping up and the tire pressure and traction lights come up on the dash. Now today my check engine light. What do you think the problem is?
If the engine light hadn't been added there may have been an answer. But with 4 lights, please find a good mechanic for a hands on diagnosis. And unless you're leaking oil, its not likely related to the oil change...
¡Gracias!
De nada...
Ok so i have a 2015 jeep cherokee latitude. My traction control light comes on from time to time on its own and turns off on its own. A couple days ago I actually got a full Christmas tree including service trans, service emergency brake. Check engine came on and i pulled two codes p1daf for implausible torque requested and also p0562 which is pcm voltage low. It threw my jeep into limp mode. Anyway i cleared the codes and got it out of limp but the cluster still flickers accompanied by traction light and occasionally it shuts the radio off. I am stumped.
Sounds like an electrical problem, but impossible to be definitive. You'll need good hands-on help. Good luck!
@@DashboardSymbols I fully agree with you on that. I can make it act up by just turning the steering wheel while parked!
Multiple lightning, power steering, and speedometer all went crazy. Turned out to be a loose battery cable.
Good job getting to the bottom of it...
Would you mind elaborate what lights all went on? Over the last few days, my BRAKE, ABS, POWER STEERING, and TRACTION lights have gone on and stayed on for a few hours, then gone off shortly, come on again and then after being parked for a bit, they come on shortly and then turn off for a day and a half or so. Then it repeated the process again. Car is running totally fine...no issues whatsoever.
@@huskertj same problem with me! I'll try cleaning the battery cables!
I have a 2010 Dodge Ram 1500, My check engine light keeps turning on and when it does the traction control light turns on with it as well. It happens while I drive or even idle sometimes. When this happens I turn my truck off and then back on and the traction control light turns back off and the engine light stays on. The code is P0340 camshaft position sensor , I’ve changed it out multiple times with different sensors but this same cycle keeps happening over and over randomly. Any ideas what’s going on?
Well first, ignore the traction control light. It will resolve once the engine problem is resolved. Unfortunately, not much else I can add, although my code reading adds "...circuit malfunction", which suggests the sensor's power path has an issue. Let us know what u find...
I had drove my car yesterday and the engine light was on then the car locks started going up and down, and the car was slowing down and then accelerating. The slippery light and the service power steering light came on too. I have a 2014 Chevy Cruze. The engine code was something like P1101, the MAF sensor...
Seems like you already have the answer. Time for a new sensor, unless you think you need something else from me...
@@DashboardSymbols I wasn't sure, but thanks for your comment!
@@Mama4n5 Have a good tech verify it. Once its taken care of, all will be well...
Even the obd 2 scanner said it was that. Replaced all 4 spark plugs and the wires and the coils and the car was running better than b4.
I have a 07 Subaru. When I bout the car. The engine light and cruise and traction lights come on. I've had the diagnostic done. I was retold the traction light is the problem. Its AWD. And my car is losing gas. And now when I crank it up. The lights have went off. What would cause it to just go off the dasboard
First, traction control will NOT impact the engine, but an engine problem WILL turn off the traction control (so the light comes on). Why the lights are off I do not know, and I don't know what you mean by "losing" gas. Its time for a new mechanic...
My lights came on only when I steering fully to the left, put the first gear in and start to accelerate. I’ve got the ABS the stability control lights on and parking sensor. After they disappear... I’ve been to my local repair shop they said it’s because my tyres worn so they changed them, I came home and the problem is still persisting. Any Idea please?
Given the THREE lights, my first thought is physical damage: a pot hole, a curb, etc, and only on one side. But there's no way to see it and diagnose from afar, so you'll need someone more competent than used (I will say that it never hurts to have new tires). Hit anything recently?? Even just a little?
DashboardSymbols.com thanks for the answer. I might hit something but that was maybe on the other side and went under the car it was some plastic or metal thing went under both wheels.. anyway thanks for the advice!
@@zajecer That leaves a bit of detective work. Best of luck...
I have a 2019 Nissan Altima sr and
Check engine light
Feb off
Slip indicator
Are all lit up on my dash. Any idea?
Pretty much as the vid indicates: an engine problem needs to be addressed. Once done, the rest will turn off. What problem? No way to tell without hands on (but do make sure your gas cap is tight).
Hello, I have Camry 2010, yesterday was snowing 🌨 a lot and when drove to home I saw in my dashboard on and off the stability signal , it’s that ok to drive it?
Assuming your tires are good, it should be. The system light comes on when helping keep the car stable in slippery conditions...
All these lights started to come on. When I turn on the AC it seems to idle worse and get shaky. I'm assuming it has something to do with the spark plugs and something misfiring
Misfire likely. Hard to say exactly what, but hang in. Last time I dealt with a similar situation, it was plug wires...
Car skidding lght along with caution sign with a cresent wrench 2 different lights.code say replace part on steering colm.replaced part both lights went out,start car press traction button on off working light comes as indicated that its working,ok car in drive vehicle moving turn wheel light come back on,push button nothing no more on off light.what else can you look at for this.2008 Chevy trailblazer anything you could tell me would be greatly appreciated.
It "feels" like an alignment issue, but can't be sure of course. Replacing parts in the steering column could have impacted proper alignment. Lots of stuff up front in a 4WD vehicle to keep stable...
2012 cadilac srx AWD getting engine reduce and service stabilitrak massage came and check engine light and car sleep sign came on odb code reader says fuel pressure regulator 1 circiut control is high please help me to solve this problem
You already know what needs repair, but sorry, you'll need a good hands-on mechanic to actually get it done (all problems will be solved when the engine is repaired)...
My 2011 toyota camry with 174,900 miles has a check engine light as well as the slippery sign. I got my alternator replaced and the lights went off. 3-4 weeks later, both lights comes back on. My car has trouble starting when I pump gas (it had this issue before i got my alternator replaced too) any idea of what it may be?
Believe it or not, start by replacing the gas cap. "Feels" like a vacuum problem, starting at the cap...
Its spark plugs and or the ceramic plugs especially if it runs crappy at slow speeds and fine when you give it gas
I have a 2013 Mazda 3 skyactive. The check engine light and the skidding car lights are flashing. When starting the car it starts shaking, and the power keeps dying down. My husband changed the spark plugs, the ignition coils and the mass air flow sensor. It's still doing the same thing.
I'm scared of driving it to AutoZone to diagnose because I'm worried it might turn off on the street. What could it be?
Sorry, there's no way to know exactly without a hands on diagnosis. And I'm not sure I'd trust AutoZone to know. Find a good tech!!
I am having the same issues on my Mazda 3 as well. Did you get the problems resolved? Thank you.
When my stability light appear it will not let me shift into gear.
Unless I turn the vehicle off then on again. All The while my check engine light is on.
Had that checked says it's a Catalytic converter.
Stability control is not the issue. Whatever engine problem that exists is. Have it addressed, stability control will be restored...
I have a Dodge Durango RT with the hemi 5.7 Lit AWD, but my service is electric stability control. It's been on for a whole month. Any help?
Not really. Head over to Autozone and snag their code reader. Then you can focus on the resulting code...
After changing my steering coupling, the stability control turns on whenever I pass 40 and will go when I turn the car of and back on.
Assuming no other lights on, it sounds like something ended up out of alignment...
I have a check engine light & a slip light on , I scan the car code P0113 ? Air intake sensor ?
Looking for knowledge;
15 infinity Q50 (rwd)
Air temperature circuit. But, search the web for the code + your year, make and model...
I have the power steering light on (not flashing), and the electric stability light on, but nothing else. Any idea what could cause that? Power steering is not working. Thanks.
Stability control is off (light on). It depends on other systems working properly, including steering. Fix the power steering...
@@DashboardSymbols Yes, I figured as much. So it will have to go into a workshop, then, as I would not know how to do that. Thanks.
Hey what’s up man I have 2015 Dodge Challenger and this is all popping up in my car and the power steering went out and I can’t turn off my windshield whispers any idea as to why and how that could of happened? Thank you
Sorry, no. Sure suggests a serious electrical issue though. Going to need a good mechanic...
I have a 2010 lexus es 350 both malfunction indicator lamp and traction control light is on what does it mean ?
Ok, so two comments from you. First, here I would initially answer that there is an engine issue that needs to be addressed, because I assume you mean the check engine light is on. U then asked about brakes, and yes a brake problem would indeed impact the traction control! So, first, if there is a known brake problem, address it for safety's sake! And second, have the check engine light diagnosed and repaired...
I have a 2014 Honda Accord and my power steering light came on only for a second but went off and my car drives fine. Should I be concerned?
Only if it does it again. Otherwise, just a random hiccup...
So I installed an aftermarket intake system and a new crankcase filter as well, after 20mins my traction, vsc, and engine lights came on lmao, how can I disable this? Cause car drives PERFECTLY NORMAL. Took it to 120 no problem, tried to spin in out and hilariously all 3 lights turned off but then came back 1 week later
Well, I may not be able to advise fully here, but the only reason why ALL the lights are on is that your system is reading an engine problem. Likely related to emission control. So long as the aftermarket stuff is involved, you will likely be stuck with it, it may cause other engine problems, and you may not pass emissions tests, if there are some where you are. Check with the manufacturer...
@@DashboardSymbols we learn to live with it haha, and Im sure its a simple intake issue nothing crazy I mean it is a lexus 😅
Also thank you so much for such a quick reply brother
My car dashboard showing red steering wheel sign my steering is very heavy any ideas
A problem with the steering clearly. Check the fluid, but likely a bad pump...
I have a 2011 corolla and the check engine light and car sliding light is on and my car won't accelerate at all. Like I push the gas and I don't move. However it will move at idle. Forward and reverse at an idle. But won't accelerate when I push the gas.
Clearly an engine problem that will require a hands on diagnosis. Too many possibilities to speculate. Find a mechanic you or someone you know trusts...
My gas cap keeps coming on. It did and then a bit later the steering and the wheel slip light came on… hoping that’s it. No issues with driving the car. Engine is firing fine
Ok, the gas cap light -- and assuming its seal is good -- essentially points to a vacuum leak, which is an engine issue, which will cause the car to believe that steering and slip may not work properly. Even though the engine seems fine, have it properly checked out...
My electric stability control light comes on sometimes and when I try to accelerate it doesn’t let me when I turn off my car the light will turn off and while drive completely normal but sometimes out of no where the electronic stability light will come on and the check engine light will also come on at the same time and my car will turn off and when I turn it on it goes away ! I have a 2017 Hyundai Elantra
Can't diagnose it from here, but it IS an engine issue, likely electrical. Have a good tech check it out...
I have VSA, Power Steering, ABS & Break light on in Honda Civic 2015. What could be the issue..?
Brakes. Period. And serious, so get them checked out...
I have check engine light, slippery road, low pressure ,ABs lights which happens ata the same time... on my vw polo 2011.. what could be the problem
@@alicekarimi5223 As the video suggests, it all starts with the engine light. And a hands on diagnosis will be necessary. One of the few things the average driver can do is make sure the gas cap is tight...
High engine coolant temperature warning light, check engine light and tcs/dsc indicator light are all on and after some minutes the engine went off and can’t start the car
No easy answers here and well beyond on-line capabilities. A clear engine issue that needs a hands on diagnosis and repair. Good luck!!
My 2015 Nissan Murano has both the check engine light and the skidding car light on but neither of them are flashing.
Solid lights = a solid problem. Have the engine issue diagnosed and corrected. Stability control will resolve itself (light off)...
My 2004 Toyota Rav4 4WD VSC TRAC warning light doesn't come on dashboard when ignition is turned ON to confirm it's working.
How do I get around it?
I don't believe there is a workaround for this. First check for recalls on the RAV 4 (google search). If none, you'll need a good tech to repair the problem...
@@DashboardSymbols OK thank you
My Camry did this and a frend said to tghten the wheel nutz really tightly. This fixed
Interesting idea. Suggests that the alignment should be checked...
Hopefully you can help.. today I finished my 2013 Subaru Impreza electric rack and pinion replacement and after i took it out for a test drive and everything worked perfectly except when I get the mph up to about 40 the traction control light, (car with skidding tracks) comes on and flickers as it cuts power to the wheels.. I let off the throttle and the light goes out... Any ideas what's happening... ?
Honestly no. It could point to any number of issues with the rack and the rest of the front end. It sounds like you replaced it yourself, yes? So, did everything get properly aligned? Was the fluid purged of any air? Was it a used rack?? Etc., etc., etc. Have a good shop check it out...
@@DashboardSymbols yes I replaced it myself... It's 100% working properly and was taken out of a car that was rear ended .. it's electric with no fluid.. I haven't had it aligned yet but it set up almost spot on . I've done several rack and pinion's before...
@@Brent700 A good jolt from behind can still damage parts in the front. Let me know how this turns out...
Had similar issue with those lights check engine steering abs and brakes, but in my case It felt as if I lost power steering control and pulled over. Due to the warnin signs it didn't let the car start.. as we were waitin and I was callin my tow company some how the car managed to turn on and stay on... anyone come across that issue
Likely (but not guaranteed) an anomalous electrical issue in the engine resulting in power loss that set off the other issues. However, the lights will have left codes behind that a good tech can interpret. Take it in...
My check engine, and traction control, and power steering all came on today. All orange. I am due for an oil change. I am pretty clueless about cars 🤦 any ideas? I have a 2014 Honda CR-V. TIA
So sorry I missed this. Have the engine issue repaired and the rest will take care of themselves...
What was the issue
I have the same lights on PLUS the tire pressure light. I have enough air in all four tires. Car does not slide/skid. Brakes work good. But my steering wheel was pretty loose a few days ago. Now its stiff when I turn corners. Only codes on vehicle is showing wheel speed sensor issue on front right wheel. Idk whats going on with my car. 🤷♀️😔
@@carladenise486 hello! When you find out the problem please let us know🥺 at first I only had tire pressure sensor light on and then out of no where a whole bunch of lights came on all at once and then about after 10m of driving my speedometer and eco light do not work anymore. Idk what It could be, never had any problems before with 2017 Camry 💔
@@RomHackk Its so frustrating. Im getting abs wheel speed sensor replaced today. I hope it resolves the issue. 😔
This has been happening to my 2018 Silverado z71. The check engine light flashes then the skidding car comes on. Then it’ll all go away then come back later again.
There is a recurring engine issue that needs to be diagnosed and repaired. There should be a code saved in the car's computer...
My 2012 Honda accord was due for an oil change a week ago but I was waiting for the following week to get my oil changed, after starting my car I noticed check engine light and ths VSC swirling car symbol was on I started to drive and upon accelerating a bit my car started to shake a bit, prior to this happening I was speeding to work all week while I still had my oil change pending, do you think that caused my issue
Unless your oill level was very low, its unlikely that simply being late for an oil change would create a problem. What you describe is more likely electrical, and needs a hands on diagnosis from a good tech...
@@DashboardSymbols so maybe bad spark plugs then huh 🤔 Thank you so much for answering by the way! Really appreciate that!!
@@hectorcarrasco3394 Could be, but also a half dozen other things too. And you're welcome...
@@DashboardSymbols turns out it's my crank shaft position sensor A having intermittent issues, misfiring at times, did a scan with an OBD reader, Thanks for the information, just wanted to update you!! 😊👍
@@hectorcarrasco3394 Nice solve...
Hi after I got an oil change on my 2012 Nissan Altima the check engine light stayed on and the slip sign. Can you recommend anything?
Well, first the slip warning is on because of the engine light. If the garage actually gave you the car back with the engine light on, please check the oil immediately. If the level is ok, there's likely something else at play and it will need a hands on diagnosis...
Hi there I drove on a bumpy road and my abs light, brake light , traction light come on and my fuel gauge fluctuates , speedometerdoest move , temperature gauge is off and odometer doesn’t move also what could be the problem
Something has likely come loose behind the instrument panel. Nothing to trifle with, so I'd recommend finding a good mechanic...
Mine did the same thing today....I'm checking all of my fuses and my steering control sensor. I hit a pot hole the size of Texas and it was fine until I got home shut it off and when I went to leave again all of my dash lights were in spedo not working fuel and temp Guage goes off and on randomly, check engine light, abs, traction, steering wheel and seat belt lights all on for no reason....I'm hoping it's one of the fuses....I use my car for work everyday and drive all day....I'm freaking out now....
My check engine light and the traction control light came on last night.I pulled to the side of road and turned off car and when I restarted it the lights cleared.I recently ran over a huge boulder in a canyon.Last week I had a wheel bearing replaced because of the rock I ran over.What do you think might be the problem?Thanks
Its simply not possible to determine from a distance. you'll need a proper hands on diagnosis. It can be said that likely as not there is some issue developing in the emissions system...
@@DashboardSymbols the code on computer says c1419(deceleration sensor internal circuit)
Sill need a local tech. Although its electronic and may never show up again...@@genebrimage9150
@@DashboardSymbolsthank you
Hello. I have a Ford Explorer 2008 LT. last month my battery died. I had it jumped. Then it died again. I had it jumped a second time. The “Service RSC Now” warning popped up and then the traction.
I replaced the battery.
Eventually, the check engine light came on with a code for the PRNDL of the transmission. I had that replaced. The transmission shop says the computer has bad programming. I had the computer replaced in March. The dealership that replaced it claims the computer is fine, that it’s my after market Wheel Bearings losing signal and causing the lights to come on.
None of these lights/codes came on till I jumped my battery.
Any advice?
Thanks!!!!
Ok, a lot to unpack. First RSC and Traction are definitely related, so solving one will likely take care of the other. I have 2 questions: did u actually replace the computer? and Second, wheel bearings doesn't make sense. Maybe just Wheels???
@@DashboardSymbols yes we had the computer replaced or at least we paid for it!
I traded in the vehicle on Saturday. So I no longer had to deal with it. I just don’t like being lied to by a dealership service department or my concerns ignored and belittled because I’m not as educated in vehicle repair and they’re able to take advantage.
Thank you for taking the time to reply. 🤗
@@prixer925 Oh my. Well, I feel for you. I come out of the dealership environment and am happy to be out. Its a very fine line between being scammed and personnel simply being over their heads trying to repair complex electronics. I'm guessing u went elsewhere this time! Best of luck with the new car...
@@DashboardSymbols Thank you! I appreciate people like yourself who truly care to help others! Be blessed!
@@prixer925 My pleasure. And thank you for the kind words...
I'm pretty sure my power steering is going out.. and I haven't done an oil change in a few months
If the check engine light is on, always start there. Have it checked out and fixed...
Can one of those easy fill gas tank things become loose like a regular cap? If so, how would I know? Can the gas itself be causing the check engine light to come on?
Ok, so difficult question. Going backwards, contaminated gas can cause the check engine light to come on, but the car would be running very badly. Its most likely a small vacuum leak, which is where the gas cap MAY come in. Regardless of cap type, there will be a seal where it contacts the pipe. However, its more likely that a good mechanic will be needed for a diagnosis...
@@DashboardSymbols issue with that is I had the dealership look it over & they never saw a problem. They use Sam's gas. I put gas from a different station the previous fill up & no light at all. Went to Sam's a few days ago bc I'm broke & it lit back up yesterday.
Try to stay with the 'better' gas for a while. If the light stays off, it will save you at least anxiety!!@@crazylablady
I have 2013 Honda CRV 73k miles
Check engine, traction control and power steering lights all came on.
It drives perfectly normal.
When I get gas and drive it a couple miles the lights will go off but will eventually come back on.
Been doing this for about 3 weeks.
I had a shop read the codes but I have read that might not be any of the issues and could be a easier fix that I could do myself any suggestions?
Thank You.
Sorry, but you need to start with the codes. Its an engine problem, so ignore any others. What were the codes???
@@DashboardSymbols the only code that came up on the report was p0341. Thank You for the response
That's a camshaft position sensor issue. Not likely a simple fix, and I'd recommend getting it fixed. Good luck!!@@CromKull19
Thank You! That is on the list of things with the code. Said it could be that or engine time chain, timing chain kit, variable valve timing actuator, vetec solenoid valve or engine camshaft.
Thanks for all your help sir.
Where is the link smh?
If its the one mentioned early in the vid, look to the upper right at about 41 seconds...
Hi i have a question …. I got steering sign first and after few seconds i got check stability control and engine light and code is P2716 I have toyota camry 2017 … can you please help me if you know what should I do to fix my car … i went to mechanic he said change transmission filter and fluid… i did but same code is still coming back
Tranny fluid! Really. P2716 is a pressure control solenoid, but you'll need a GOOD mechanic or repair manual to nail down exactly what and where it is. The other lights will resolve once that's done...
Tata hexa vehicle how to remove stability control system fault show the Dash board pls help me?
Not much that can be done from a chair. Do check your tire pressures, but beyond that, you need a good mechanic to do a hands-on diagnosis. Did u hit a pot hole recently?? No matter what, find a good tech...
What if its vdc, abs and trac off?
Have the abs checked. The rest turned off until abs is working...
I have a 2016 Chevy Cruze LT and the engine light comes on with the traction control and those are the only two lights that come on and the traction control only comes on when I’m going up hill would u know what that is plz answer it’s urgent??
I think its the engine light coming on going up hill. You'll need to get that resolved. The traction control light comes on because it gets turned off (light on) when the engine light comes on...
@@DashboardSymbols ohhh ok thank u I went to get it tested and they said that one of my coils went out they said it has a misfiring
@@jax4134 Once fixed, it should take care of everything...
@@DashboardSymbols ok thank you so much I appreciate it
I have a power steering light in yellow and also engine check, the speedometer isn't properly functioning as the needle isn't moving correctly or moving at all, the fuel gauge is dropping and rising at the same time then comes to normal. what could be wrong? VW POLO
This is ONLY a guess, but since you didn't mention an actual problem with how the car runs, I would GUESS that the instrument panel circuit board has failed. However, you MUST get a hands-on diagnosis from a competent mechanic. Good luck and let us know what they find...
My SLIP INDICATOR LIGHT, CHECK ENGINE, AND 4WD are always on...what could be the cause?
Toyota RAV4 2010 limited edition
@@kingsleyuka7267 I was going to suggest it was a Toyota or Lexus. Which gives u ONE chance. Make sure the gas cap is tight and/or the seal on the cap is good. It sets off the check engine light, which shuts down the use of the other systems. If tightening or replacing the cap doesn't work, you'll need a hands on engine diagnosis...
Okay...I will diagnose the car
I drive a Chevy Impala 2010, and recently it started to do this thing where the Check Engine light and Traction Control light comes on. The engine power is reduced and my dash says to service STABILITRAK and service tire traction system. Most of the time it would go away on its own and the car would drive normally again, but it comes back every now and then. Any ideas?
So long as the check engine light is on, its NOT a stabilitrak issue. Have the engine codes read and get the resulting problems serviced. Stabilitrak will then resolve...
Did u found the problem
my golf 6 is flashing that stability control lights when I only accelerate on 60 to 80 speed what to do to fix the problem help please
I can only guess. No other times? Rare. Check that you have good tread on the tires. Otherwise, a good mechanic will have to do a hands on diagnostic.
Again , Abs , slip light .
That makes my car to so low down to a stop and the gas peddle won’t work I have to turn off the car wait for 5 minutes or more and then turn it on the slip and abs light would turn off and then it lets me drive the car normally . Do u happen to know what’s going on I took it to 4 places and no one knows and I wasted $ 800 on trying to fix it but it doesn’t work . Please and thank u
Is the engine light on?? Also, make model and year?
My dash only shows check engine light with the slippery car. I got the check engine due to no cats
No cats?? Whatever is going on begins and ends with the check engine light. Get it addressed and the slip indicator will disappear...
Vsa, steering lights and tire pressure (after getting my tires slashed by ex and changing the tires*one tire is slightly larger than my rim*) Honda Civic 2013
The tires MUST match. Start there...
GO get a check engine light test like I did they told me “P0172(1 / 1) Stored
System Too Rich (Bank 1)
DTC Severity 2 of 3: Repair immediately if drivability issues are present. Threat to essential” all I did was run the gas out and it went away but I bought a fuel injector cleaner used that then went to a big name busy gas station where I know it’s fresh gas and fill my tank up completely. Car was driving fine with the lights still driving fine as of now
The light test is always a good idea, but are u saying the light is still on?? If so, get reset done and if it comes back please find a good tech!!
Have both lights but no check engine light
Well, all I can do is guess that one of the lights is the Off light. There's likely an issue with the system that's needs to be checked out...
Mine was BATTERY and CHECK ENGINE....can't turn the wheel
Seems like a charge issue, but someone will need to do a hands-on check...
@@DashboardSymbols I checked under the hood and the damn serpentine belt is MISSING 😂😂😂
Yikes! Some diagnoses are easier than others! @@keithawallin6325
My check engine and slip control lights been on for months. The mechanic re set it and said it was just fuel so I had to fill up with a better quality. Well this morning my wheel was turning real easily and my tyres were slowly going with. My steering wheel was on its side and my tyres were straight. I wasn’t driving it so stayed home. Not sure what’s wrong but I have to put it in to a mechanic
Indeed, a mechanic is needed. The two incidents are likely unrelated. In many models, stability control is turned off (light on) whenever the check engine light is on. Something has currently broken loose in the steering linkages, and if the check engine light is still on, have them check that too... Good luck!
Wait a second! So you mean that if my check engine and VSC are on, than the problem might be to the engine?
I am have seen that when the engine light is coming on, afterwards the VSC is following it. But when I sent my car to a service today, they said me that catalyct system and VSC System, both have problems. But I don't believe them Tbh.
A bad catalytic converter would indeed cause the check engine light to come on. That would shut off the VSC, so that light would come on. Not very likely that there is an issue with the VSC. But since they don't know that, I would find a better tech and get a second opinion on the engine issue...
@@DashboardSymbols thanks for the response. I would buy a catalytic cleaner and would see what will happen.
@@TechSignn Probably won't help, but shouldn't hurt either...
@@DashboardSymbols I have read some catalytic cleaner reviews on Amazon, and they are saying that after using it the check engine light went of. I bought a OBDII, and even it gives me P0420 code failure, and says bank 1 efficiency below threshold. It doesn't complain for VSC light at all.
@@TechSignn Its the right code, so I'll keep my fingers crossed. Let me know how it goes...
I was just driving and my car suddenly gave me a engine light and traction control warning light
Yea, its developed an engine problem. Traction control is simply off until the engine issue is resolved...
Hi! What about check engine, tcs and at lights on?
There is a serious issue, likely with the engine. Once a good mechanic takes care of that the other lights will resolve.
@@DashboardSymbols my friend's car has that right now. After turning on the ignition check engine, TCS and AT light went on..
@@felmeamercado7990 The car needs a good, hands-on diagnosis...
@@DashboardSymbols I'll let her take the car tomorrow and see the mechanic. You think it's safe to drive it?
@@felmeamercado7990If the car "feels" the same or similar, yes it will be safe to drive it to the mechanic. If not, or if she is just not comfortable, do get a tow truck. (PS Just in case, check to see if the gas cap is loose (seriously!). If it is, tighten in properly and drive it around the block a few times...)
can you please answer me ! what car is this? the one you showing us !
Sure. 2007 Audi A4. Why??
@@DashboardSymbols hehe, i make bet with my friend, to know what car he has, its looks like urs XD thanks and yeah its audi :) thanks anway
@@heddibouziani9194 Did you lose the bet??
@@DashboardSymbols hehe i didnt XD i search on google, and i just guess the car, and it was audi XD
Not true. VSC traction control and check engine light turned on and slide into the lane and I was driving 20 mph slower on the freeway. It turned out the spark plug needed to me changed and set off all 3 lights and my car slide on a dry road.
Evidently not true in your case. And be careful -- bad spark plugs won't cause a car to slide -- dry or wet road...
@@DashboardSymbols something made my car slide which is the same thing that made the VSC traction control and check engine light to turn on. I was going 20 miles under the speed limit on a dry Road. So I had it towed to AutoZone they hooked it up to scanner and it turned out it was a bad spark plugs. So I got replaced and it works great now ever since then no problems whatsoever. I know I might not know anything about cars but I know what I experienced I was driving the damn thing for crying out loud. And that is what the scanner said it was. Whenever I got it fixed it runs like a new car. The problem was solved.
The check engine light turned on because the engine wasn't working properly and a bad spark plug can make the engine not work properly. So because of that it triggered the VSC and traction control light which caused it to slide.
What the code said was a cylinder misfire so I took it to go get fixed and it was a bad spark plug. Bad spark plug can cause a cylinder to misfire which can cause to check engine light to turn on and it take engine light that's on can turn off traction control in VCS causing the car to slide. For once the issue was resolved the car was running new again. That was the only major thing wrong with my car since I bought it.
@@BryanG830 Turning off the VSC does not cause a car to slide, period. Hopefully, the tires are good...
So i spin my tires and it needs fixed,
Not exactly sure what you mean here, but, yes, the light comes on when the wheels spin. The system is helping you maintain control. Make sure your tires are good...
No help here, I will sum it up for you, if you have warning lights, take it to the dealer, if you have other warning lights, take it to the dealer, etc... etc... etc...
No argument here. But it doesn't hurt to have some added info...
If it's a Toyota, probably the gas cap
That does happen...
My 2012 Jeep grand Cherokee traction and check engine light will come on when going up a steep hill and lose power
Have the engine issue addressed...
Never got it fixed idk what it could be
You're going to need a hands on diagnosis from a good technician. Too many possibilities to speculate from afar...
It would have been nice if you discovered exactly what you said you were gonna cover with the slip indicator and the check engine adding the power steering thing on. To most of this explanation did nothing for me thanks a lot
Agreed. All this to tell you to bring it to a mechanic.
Hey. I have a Lexus ES350 2015 and it has ABS, check engine, traction control, steering light on. What could it be? An urgent reply will be appreciated.
Given the check engine light, I'd start there. But an actual diagnosis will require hands on checks. Just make sure the gas cap is tight first...