Greetings Danny 🙏🏽Thanks for the video it really helps one problem u am having after I do transmission reset the transmission reset light still blinking is there a problem with the transmission? Because after you reset i see your lights went out ..please help me Danny all the way from Jamaica.thanks
Thanks for this. Had the 'cog' error light on, but everything else seemed to be normal. Did the reset, and just like in your video needed to give it two goes before it started the sequence. Out of interest, just before it started, it did a flash sequence which was one pause one pause 8 pause. Does that mean anything?
Hello brother...I have got an Isuzu NLR85-4JJ1 - it’s has got AMT I changed the engine but now the transmission makes a sound when shifting to R or D. It makes a loud sound of engaging into R or D.
I'm working on a 56 plate NPR that the customer has changed the auto gearbox. Got no speedo/tacho operation. Is there a certain position the drive for the tacho needs to be fitted in to the gearbox to engage the bevel gear? Its a dustbin lorry with non standard tacho drive and when its bolted up, the drive can be turned by hand which is wrong. Any help would be greatly appreciated, thanks in advance.
engage in any gear with your left foot on the brake and accelerates,if the engine revs normaly the most possibilty,your automatic side major parts are worn out..like oil pump,clutch packed and maybe tourque converter..check also your tcm.
Very useful video, I have an npr at the moment that won't shift past 2nd gear, also won't engage pto. I had texa on and found no faults, all seems good. Had the three shift solenoids off and they check out also, any suggestions appreciated ta
I have an Isuzu but the GMC w5500 HD 5.2 L diesel and I'm having problems with the transmission I can shift it from Drive second first and go from 1st 2nd drive and it shifts but if I just put it in drive it won't shift at all it will drive but the gears won't shift can you please help me
Hi Danny, just tried this relearn and can’t get it to work, trucks just had the valve body thing in front of the clutch pack, got a fault code active p0718 input shaft turbine speed, any ideas or directions for me to go in, with my diagnostic?
Hello, We have an ISUZU NPR85 2014 automatic transmission and is not shifting on sixth gear. Even not on manual. Sometimes shifts but engine rpms goes high like you keep the clutch pressed.. any recommendations?
I'm having the same issue, go up to 6th the drop down to 5th. Did you get it sorted out? Because I was thinking it's the shift solenoid or strainer is blocked 🤔
My isuzu elf 4jj1 got towed while the gear is in drive mode.and now when it a time to start after it got fixed,it keeps alarming on the dashboard with a gear symbol. My question is how to reset it? Or is it resetable or not?
The cog light comes on when I am trying to start off. But goes off after sometime . Sometimes the truck slips in gear 2,3 and then in 6th gear when a acsending uphill the cog light comes one and slows down the engine speed.
On a 2018 npr hd gas jobber we just installed a new jasper trans. Buttoning it up tomorrow. I'm told it will need a dealer to flash it once we are done.will this essentially be the same thing ? Thanks in advance.
@@dannyandrew725 we finishing it up .we appreciate you getting back to us.doing the exhaust manifold bolts while we wait for a few parts.if u got a way to get me your adress wed like to send u one of our company shirts. Thanks again
@@dannyandrew725 hallstead, Pennsylvania .we are a trucking company and have a heavy equipment garage.doing this job for the company that brings us our semi truck tires.we normally don't work on anything non diesel,much less isuzus with chevy parts.lol. I do have the software and TeamViewer but not a version I can connect to there mainframe.
Hello. My Isuzu 400 truck does go on reverse gear but it does nothing. The drive gear works correcty it only the reverse gear that does not work even if i put it on reverse. Please help brother
Hi Danny I've blown my tcm, getting a new one off Isuzu and they say it needs programing to the vehicle by them before you can even try a gearbox relearn, do you know if this is correct, the problem I have is getting the truck to the dealer as it won't drive at all and they won't come out to my place to do it. Cheers Mike
My question is, I have an Isuzu NQR 2009 diesel 4 cylinder. In The USA,. 5.2 L. With bad solenoids automatic transmission., I changed 4 shifting Solenoid, but my Scanner doesnt read anything now.?. Do I need to reset my transmission in order to Scan again any codes.?. All my old codes are gone, thanks JC
Hey. What issues was your transmission having for you to replace the solenoids? Reason I ask is; I have a 2007 gmc w4500 5.2 diesel and it’s not shifting into 4th gear/Overdrive.
Hi Danny Any idea how to reset the 2006 isuzu npr 200? I can get the paperclip to bring up the gearbox light to flash but i can't get it to do anything from there. The problem is when I put the truck into drive it beeps and then is delayed for about 6 seconds then thumps into gear a bit hard... This is why im.trying to reset it but can't get it to happen. There's no info out there on how to do it. Any idea?
i have the same truck and my tranny light is on and my level indicator light in dash keeps showing R no matter what gear you put it in. helpppppppppppppppppppp
I have come across a similar transmission that is showing N even when shifting to R or D. Will this reset help out in fixing my problem..? Transmission has been serviced recently by someone else and now owner has this issue. Thanks in advance.
L0L clip it into the b d i read em you'll know which one it is there's two ofem wot ya connect! (out of 16 connections on the OBD plug) yeah but if short the live wire to the ground wire pop goes the fuse!
Ive got 69reg and the gear change is so slow its actually a hazard even more so when Im towing a chipper and carrying woodchip. It changes gear so slow that once its done it the road speed has gone down so it changes back down to second and it happens all over again. I just take it out of eco and use the manual shift.
Hi I have the NPR got in it to start it and dash lights flickered now no power in cab at all,,, Fused wire is fine power is ok to alternator... I now have no clue, any ideas ?
Hi i got 2008 isuzu frr 500 amt, 2nd gear gets stuck and doesn't goes to 3rd when i am standing at set of lights or in traffic, it happens couple of times a day. Like we can say delays in gearing up and i usually do neutral and put drive again to keep it moving. I tried ur way as in video but the beep doesn't comes up. The light flashing due to wire inserted but nothing happens with fast and slow button. Please advise. Thanks
Hi Danny, my 2017 NPR 55-155 AMT is stuck in neutral but saying it is in reverse on the dash. Have you got any ideas of what this could be. Thanks Trent
@@dannyandrew725 thanks Danny. I should have given you the fault codes P0889 P0685 P0700 U0100. Hope this can help. Also I tried the paper clip trick and that didn’t work.
I had tried it to my truck this morning but it doesn't reset. will you give me more troubleshooting as my unit will not go further to 6th gear. Thanks in advance.
Hi Danny would you ? recommend this, just as maintenance procedure if has never been done , 500k , drives good . Just super paranoid about this box packing up some day. So I try do everything to prolong its life . Touch wood all good for now . ?
What do you call the 3 big solenoids in an automatic transmission.? The smalls are called Shift Solenoids. ButI dont know the name of these 3 big solenoids in my automatic transmission. Thanx
Hi, how do you permanently disable eco mode or ensure the truck starts in 1st gear everytime. We have 9 trucks, and we have suffered gearbox failures on all of these trucks due to this eco mode. Isuzu says we have to press eco mode everytime we start the truck. I cant relay on my drivers to do that..
@@dannyandrew725 денни здравствуйте, напишите свой номер вотсап, у меня проблема с автоматической кпп смузер, нигде немогу найти информацию про эту поробку
I did the reset and after the clanging in the transmission the nutral light did not come back up and now the truck can't go in any gear. How can I correct it
@@dannyandrew725 thanks for the reply, would love to see a vid on how to do an AMT fluid change, I only seem to get less than a litre of fluid out when I drain it.
@@Sidrcride hi mate the way you done it is the only way apart from taking the gearbox out 1 and a halve lts out same back in and run for 20 mins and do the same again probably 4 . 5 times until its looks clean I hope this helps thanks danny
Hi, i have an Isuzu LT434P with AMT. The gearbox will randomly shift out of gear while moving, i.e suddenly the same warning light will show up on the dash, engine revs but vehicle isn't responding, causing me to be stuck in the middle of traffic. Had to shift to neutral and drive again for a few times for the gearbox to re-engage the gear. Had tried servicing the gearbox and even changing the fluids but the problem is still resurfacing. Any idea if your method will help? Thanks in advance
You can always try my method but if it keeps coming out of gear it could possibly be 1 of the 3 gear change cylinders on the side of the gearbox faulty
@@dannyandrew725 its always the 3rd gear that has this issue. It only happens to the 2nd or 4th gear a few times. But most of the time its the 3rd gear
Batteries were installed incorrect for about 10 seconds! Now only have first and reverse and not charging Code UO 101 loss compunction Any advice would be appreciated
@@dannyandrew725 Thanks Just seen your reply now what’s a good time to call ? Also not charging batteries, probably fried the alternator. Is there a fuse anyway?
There is a fuse but start it up and check the voltage coming out of the alternator 1st easiest way the fuse box behind the n/s wheel swap the 2 yellow relays and try your gears when you have swapped them
@@dannyandrew725 it had a code for this mode shifter I cleared the code and performed the reset procedure just as you instructed it went down to the last stage where the screen went blank for the shifter now it's stuck there not able to move the truck
Thanks pal, you saved me from absolutely terrible time in central of London 😅
Great info, thanks heaps
Put a brang new smoothbox in a NPR 400 today , this will help me greatly tomorrow. Thank you👍
Greetings Danny 🙏🏽Thanks for the video it really helps one problem u am having after I do transmission reset the transmission reset light still blinking is there a problem with the transmission? Because after you reset i see your lights went out ..please help me Danny all the way from Jamaica.thanks
Thanks for this. Had the 'cog' error light on, but everything else seemed to be normal. Did the reset, and just like in your video needed to give it two goes before it started the sequence. Out of interest, just before it started, it did a flash sequence which was one pause one pause 8 pause. Does that mean anything?
I’ve got an FRR600 with AMT, if I brake heavy it will grind to change back to 2nd once I’ve stopped, have you had this fault before ??
Do the stroke sensors on the AMT need programming if replaced with new ones?
No plug n play
How do I no on which hole do I put the wire when doing the reset.
Hi thanks for the vid my isuzu 11 ton f series when I start it it is in 5 and I have to go down the gears to get it into 1 to take off
Does your speedo work when you are driving? If not change the speedo and that should sort out your problem.
@@mahlatse3138 hi hello ...where do i find the speedo ,mine has a blank off where the speedo is suppousd to be
Is it Same procedure for a 2019 nps? Can't get it to work
Hello brother...I have got an Isuzu NLR85-4JJ1 - it’s has got AMT I changed the engine but now the transmission makes a sound when shifting to R or D.
It makes a loud sound of engaging into R or D.
I'm working on a 56 plate NPR that the customer has changed the auto gearbox. Got no speedo/tacho operation. Is there a certain position the drive for the tacho needs to be fitted in to the gearbox to engage the bevel gear? Its a dustbin lorry with non standard tacho drive and when its bolted up, the drive can be turned by hand which is wrong. Any help would be greatly appreciated, thanks in advance.
Hi Danny, I have a 7.5tonne slide and tilt isuzu n75 190, the electrics (pto in) all work but the slide and tilt won't work? Any recommendations?
Sorry without seeing it I haven't a clue
Hi Danny I have a 2019 NLR only selects Reverse and 1 gear. Auto trans light and check engine light on. Any suggestions?
engage in any gear with your left foot on the brake and accelerates,if the engine revs normaly the most possibilty,your automatic side major parts are worn out..like oil pump,clutch packed and maybe tourque converter..check also your tcm.
Hey mate i have npr 400 smoother auto idle up adjuster not working and cant engage pto since it stoped working
Hi got one with a gearbox light on.. jumped the OBD and got a flash code of 38!! I think Amy thoughts
It doesn’t drive at all.. it’s an 06 plate
@@jonwilkins5402 not sure matey you can call me any time 07887480560
Very useful video, I have an npr at the moment that won't shift past 2nd gear, also won't engage pto. I had texa on and found no faults, all seems good. Had the three shift solenoids off and they check out also, any suggestions appreciated ta
Check the wiring going to the fuse box behind the n/s/f wheel where it goes round the chassis sounds like a split wire
@@dannyandrew725 will give it a check in the morning, much appreciated 👍
Are you near manchester
Dublin! Appreciate your help though
I have an Isuzu but the GMC w5500 HD 5.2 L diesel and I'm having problems with the transmission I can shift it from Drive second first and go from 1st 2nd drive and it shifts but if I just put it in drive it won't shift at all it will drive but the gears won't shift can you please help me
Hi i own a 2016 npr which gets stuck gears. But after running awhile there seems to be no problem please help
Hi Danny, just tried this relearn and can’t get it to work, trucks just had the valve body thing in front of the clutch pack, got a fault code active p0718 input shaft turbine speed, any ideas or directions for me to go in, with my diagnostic?
On the bellowing 2 sensor 1 on each side faulty you can wotsapp me on 07887480560
Hey bro, my Isuzu 2020 4hk1 paired to Amt MYY6S transmission has lost gear number 6. Any suggestions to fix?
2020 mate is under warranty back to the dealers
Does it not go in 6th gear in manual aswell
Hello,
We have an ISUZU NPR85 2014 automatic transmission and is not shifting on sixth gear. Even not on manual. Sometimes shifts but engine rpms goes high like you keep the clutch pressed.. any recommendations?
I'm having the same issue, go up to 6th the drop down to 5th.
Did you get it sorted out?
Because I was thinking it's the shift solenoid or strainer is blocked 🤔
Yes if I remember was the shift solenoid. Need to clean them good with WD40.
WHICH PINS ARE YOU JUMPING 4 AND 11 ?
Did you figure out which pins should be used
4 and 12
My isuzu elf 4jj1 got towed while the gear is in drive mode.and now when it a time to start after it got fixed,it keeps alarming on the dashboard with a gear symbol. My question is how to reset it? Or is it resetable or not?
Sorry reset by dealers only way
Hello Danny
For the isuzu transmission reset can i know the red button must be press or not
Thanks
Out mate
The cog light comes on when I am trying to start off. But goes off after sometime . Sometimes the truck slips in gear 2,3 and then in 6th gear when a acsending uphill the cog light comes one and slows down the engine speed.
Can you get a error code of it
Do it through WhatsApp cheers
I can't reach you on wattsapp
On a 2018 npr hd gas jobber we just installed a new jasper trans. Buttoning it up tomorrow. I'm told it will need a dealer to flash it once we are done.will this essentially be the same thing ? Thanks in advance.
No mate it should be plug n play
@@dannyandrew725 we finishing it up .we appreciate you getting back to us.doing the exhaust manifold bolts while we wait for a few parts.if u got a way to get me your adress wed like to send u one of our company shirts.
Thanks again
Hi mate you can send it to danny andrew c/o crowfoot carriers park street stalybridge Manchester England SK152BT. TEL 07887480560 THANKS
Where you based
@@dannyandrew725 hallstead, Pennsylvania .we are a trucking company and have a heavy equipment garage.doing this job for the company that brings us our semi truck tires.we normally don't work on anything non diesel,much less isuzus with chevy parts.lol. I do have the software and TeamViewer but not a version I can connect to there mainframe.
Hello. My Isuzu 400 truck does go on reverse gear but it does nothing. The drive gear works correcty it only the reverse gear that does not work even if i put it on reverse. Please help brother
Hello can you reset the trans on?a 2007 npr the same way?
With the fast and slow button yes
Hi danny i have a isuzu elf 2007 4jj1 engine . The cog light comes on , no reverse , onlt 1 and 5 . Can you help .
Can you WhatsApp me thanks 07887480560
Hi Danny I've blown my tcm, getting a new one off Isuzu and they say it needs programing to the vehicle by them before you can even try a gearbox relearn, do you know if this is correct, the problem I have is getting the truck to the dealer as it won't drive at all and they won't come out to my place to do it.
Cheers Mike
07887480560 can you WhatsApp me matey
My question is, I have an Isuzu NQR 2009 diesel 4 cylinder. In The USA,. 5.2 L. With bad solenoids automatic transmission., I changed 4 shifting Solenoid, but my Scanner doesnt read anything now.?. Do I need to reset my transmission in order to Scan again any codes.?. All my old codes are gone, thanks JC
Hey. What issues was your transmission having for you to replace the solenoids?
Reason I ask is; I have a 2007 gmc w4500 5.2 diesel and it’s not shifting into 4th gear/Overdrive.
Hi Danny
Any idea how to reset the 2006 isuzu npr 200?
I can get the paperclip to bring up the gearbox light to flash but i can't get it to do anything from there.
The problem is when I put the truck into drive it beeps and then is delayed for about 6 seconds then thumps into gear a bit hard...
This is why im.trying to reset it but can't get it to happen. There's no info out there on how to do it. Any idea?
Can you WhatsApp me
I dont have whatsapp. Why not just tell me here
i have the same truck and my tranny light is on and my level indicator light in dash keeps showing R no matter what gear you put it in. helpppppppppppppppppppp
Do you have npr 85 lorry gear box learning procedure?
No sorry matey I dont but send me the full reg and I'll check to see if there is 1 for it
Ese gancho que puso en los fusibles ?
I have come across a similar transmission that is showing N even when shifting to R or D. Will this reset help out in fixing my problem..? Transmission has been serviced recently by someone else and now owner has this issue. Thanks in advance.
No it won't when you do a relearn it's normally when you've replaced something or you have a slow gear change
No it won't
Hi
Question I lost the key for my Isuzu elf truck , but I cannot get someone to cut a spee
Wot year is the truck
@@dannyandrew725
2007 Isuzu Elf
Thanks for your reply
L0L clip it into the b d i read em you'll know which one it is there's two ofem wot ya connect! (out of 16 connections on the OBD plug) yeah but if short the live wire to the ground wire pop goes the fuse!
Which two I plug the wire on
Can you WhatsApp me and I'll send you a picture cheers
Ive got 69reg and the gear change is so slow its actually a hazard even more so when Im towing a chipper and carrying woodchip. It changes gear so slow that once its done it the road speed has gone down so it changes back down to second and it happens all over again. I just take it out of eco and use the manual shift.
69 reg take it back to the dealer they should sort it out for you
@@dannyandrew725 cheers mate ur nice bloke for doing this
Which plugs are you using 4 n 12..??for the paper clip to go in???
Hi I have the NPR got in it to start it and dash lights flickered now no power in cab at all,,, Fused wire is fine power is ok to alternator... I now have no clue, any ideas ?
Have you checked live feed to starter motor
Or check your batteries maybe flat jump leads
What do you drink mate? Thanks heaps for posting this.
I take it it solved your problem
Any donations through PayPal to my mobile number 07887480560 cheers
Hello...mine is engaging the gears but not moving
You save me
Hi i got 2008 isuzu frr 500 amt, 2nd gear gets stuck and doesn't goes to 3rd when i am standing at set of lights or in traffic, it happens couple of times a day. Like we can say delays in gearing up and i usually do neutral and put drive again to keep it moving.
I tried ur way as in video but the beep doesn't comes up. The light flashing due to wire inserted but nothing happens with fast and slow button.
Please advise.
Thanks
Can you add me to your WhatsApp and ill send you a video
@@dannyandrew725 please send your contact no. With country code
07887480560 thanks
@@dannyandrew725 how do I no on which hole or port do I put the wire?
Can you WhatsApp me 07887480560
Hi i have isuzu 2012 npr 200 amt 4hk1 engine has fault code p700 and p0909. P0900 and the gear doesn’t move down Shift or upshifting
Can you WhatsApp me
@@dannyandrew725 how to get your whatsapp bro
@@dannyandrew725 how to get your whatsapp
@@dannyandrew725 how to get your whatsapp
How to get your whatspp
Hi Danny my truck keeps taking transmission oil bit can't see any oil leaks
Hi mate red oil or gearbox oil
Hi Danny, my 2017 NPR 55-155 AMT is stuck in neutral but saying it is in reverse on the dash. Have you got any ideas of what this could be. Thanks Trent
Sorry only guessing without a error code
@@dannyandrew725 thanks Danny. I should have given you the fault codes P0889 P0685 P0700 U0100. Hope this can help. Also I tried the paper clip trick and that didn’t work.
Can you WhatsApp me 07887480560 thanks
889 is earth wire from tcm broken going to the fuse box on n/s outer fuse check wires near the fuse box where they go under the chassis
Thanks I’ll check that when I get home. I can hear the relay clicking when changing gear shifter.
I had tried it to my truck this morning but it doesn't reset. will you give me more troubleshooting as my unit will not go further to 6th gear. Thanks in advance.
Hi, I'm having the same issue did you get it sorted?
Hi Danny would you ? recommend this, just as maintenance procedure if has never been done , 500k , drives good . Just super paranoid about this box packing up some day. So I try do everything to prolong its life . Touch wood all good for now . ?
No mate only do when it starts to play up pretty bullet proof theses gearboxes
What do you call the 3 big solenoids in an automatic transmission.? The smalls are called Shift Solenoids. ButI dont know the name of these 3 big solenoids in my automatic transmission. Thanx
Can you WhatsApp me
07887480560
Having issue p0766 when it’s in drive
Can you WhatsApp me a picture of the fault cheers
Hi, how do you permanently disable eco mode or ensure the truck starts in 1st gear everytime. We have 9 trucks, and we have suffered gearbox failures on all of these trucks due to this eco mode.
Isuzu says we have to press eco mode everytime we start the truck. I cant relay on my drivers to do that..
Sorry matey but that's the only way it can be done
@@dannyandrew725 денни здравствуйте, напишите свой номер вотсап, у меня проблема с автоматической кпп смузер, нигде немогу найти информацию про эту поробку
Sorry matey you cant
You could hook up a timer and relay to "press" it automatically whenever the vehicle is turned on.
Hi Dannie I hve this Isuzu 250 NMR automatic when I put it on drive it select gear 5 what could be the problem
Without a error code its just guess work quite possibly the wireing
Did you find the problem. I have a 2006 problem doing the same thing. Goes to 5th when you select drive.
please ,which pins are you jumping 4 and 11! to reset
4 and 12 and the gearbox light should flash
You can WhatsApp me if you need to
I have isuzu N75 190 and speed sensor is disturbing what can I do?
Wot do you mean
I did the reset and after the clanging in the transmission the nutral light did not come back up and now the truck can't go in any gear. How can I correct it
Wot reason did you try a relearn
Are you on WhatsApp if you are send me a message 07887480560
What was your fix bro. Am in the same spot too. No gear indicator light in dash and struggling to go in gear
I tried to reset my transmission and am not hearing the beeps after pressing the fast button for 15 seconds
Can you WhatsApp me 07887480560
My transition is now stuck In nutral and the light does not me back in Das board
Why have you done a relearn
Hi, what's the difference between npr and nqr
They are the same
Nqr are the early truck npr are the later
what was the reason that it need to be reset?
]
If it has new parts fitted and sometimes its starts missing gears and so on so a reset now and again does no harm
@@dannyandrew725 thanks for the reply, would love to see a vid on how to do an AMT fluid change, I only seem to get less than a litre of fluid out when I drain it.
@@Sidrcride hi mate the way you done it is the only way apart from taking the gearbox out 1 and a halve lts out same back in and run for 20 mins and do the same again probably 4 . 5 times until its looks clean I hope this helps thanks danny
@@dannyandrew725 thanks alot mate.
Hi, i have an Isuzu LT434P with AMT. The gearbox will randomly shift out of gear while moving, i.e suddenly the same warning light will show up on the dash, engine revs but vehicle isn't responding, causing me to be stuck in the middle of traffic. Had to shift to neutral and drive again for a few times for the gearbox to re-engage the gear. Had tried servicing the gearbox and even changing the fluids but the problem is still resurfacing. Any idea if your method will help? Thanks in advance
You can always try my method but if it keeps coming out of gear it could possibly be 1 of the 3 gear change cylinders on the side of the gearbox faulty
@@dannyandrew725 its always the 3rd gear that has this issue. It only happens to the 2nd or 4th gear a few times. But most of the time its the 3rd gear
@@jjd8865 can you send me a picture of your gearbox on WhatsApp 07887480560
Bro my truck not starting and the truck is on reverse not nutral
Batteries were installed incorrect for about 10 seconds! Now only have first and reverse and not charging
Code UO 101 loss compunction Any advice would be appreciated
You've probly popped the tcm
Can you call me 07887480560 thanks
@@dannyandrew725
Thanks
Just seen your reply now what’s a good time to call ?
Also not charging batteries, probably fried the alternator. Is there a fuse anyway?
There is a fuse but start it up and check the voltage coming out of the alternator 1st easiest way the fuse box behind the n/s wheel swap the 2 yellow relays and try your gears when you have swapped them
That fixed the transmission, all gears working now!!
Still not charging , alternator is good ,
Fuses 27 to 33 are all good but don’t have any power
I need help with my Isuzu can you help me
07887480560
Please give me your country code
Hi,, how to check engine code ,,what pin no
@@dannyandrew725 i need help my friend
@@andersonbisnath2566 wots up my mate
How can you clear the transmission and differential oil error on the dashboard
You have to press the button and it will change to more milage
Also, what does the red button do?
The red button is 1 gear emergency if all gears lost
@@dannyandrew725 is it normal that you cant rev the engine in P? Only with the red button depressed, it revs
No it should rev up in both
@@dannyandrew725 Do you know its rev limit? Ours rev up to 3800 rpm only
Yep sounds about right for revs
I performed this video now my vehicle will not go into Park Drive nothing at all shifter display blank
Why did you do it in the 1st place did it have a fault
Can you ring me
@@dannyandrew725 it had a code for this mode shifter I cleared the code and performed the reset procedure just as you instructed it went down to the last stage where the screen went blank for the shifter now it's stuck there not able to move the truck
@@tafarimarsh9975 Hi I got the same problem I did the reset and now it won't shift in gear
@@dannyandrew725 Hi I did the reset and now nothing in the display can you and it's not shifting can you please help
Pointless video you don’t even mention which prongs to bridge together all you say is you’ll work it out
@@gt3505 like it says in the video you can call me on WhatsApp