Ford F150 Vacuum Hub and Wheel Bearing Replacement
Vložit
- čas přidán 5. 09. 2024
- This 2016 F-150 is getting a new Vacuum hub and wheel bearing assembly. The manual says this repair covers years 2014-2018. Older models are generally the same procedures but the torque specs are different.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ Vacuum Hub/IWE aftermarket: amzn.to/3ukGyGA
▪️ Vacuum Hub/IWE OEM: Motorcraft 7L1Z-3C247-A (currently not sold on Amazon)
▪️ Wheel bearing hub assembly OEM: amzn.to/3OuLU8R
▪️ Wheel bearing hub assembly aftermarket: amzn.to/3HHoitW
▪️ Thread locker: amzn.to/491k78u
🛒TOOLS NEEDED:
▪️ 1/2 impact: amzn.to/3Sfmiht
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Silicon lube: amzn.to/3HDPTMw
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
▪️ Torque wrench 1/4: amzn.to/493Xr70
▪️ Prybar set: amzn.to/3IkSlWw
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
Well done sir. Thank you for the propper torque spec!🎉
You're welcome. Glad this was helpful!
Thanks for the detailed video.
You're welcome! Glad this video was helpful 👍
Well done
Thank you appreciate it
Great video, thank you for the info and help!👍
You're welcome!
any videos for rear hub wheel bearings?
How did you know for sure it was hub assembly that was issue and not a vacuum leak elsewhere? I have heard that the vaccum line has a tendency to crack and cause issues
Good question. Pull the vacuum line off of the hub and hook up a vacuum gauge. You should see close to engine vacuum at the hub (18"-21"). But as little as 10" of vacuum should be enough to disengage the hub from the integrated wheel end. If you have sufficient vacuum at the hub but the hub is not fully disengaging then suspect a faulty hub. Ford calls these an IWE (integrated wheel end) you may also see them listed as a 4x4 actuator. Hope this helps 👍
Great video, about to change my iwe on my 2017. What made you change the bearings? Play or vibration at high speed? I currently have vibration when doing 110km about 65-70miles, it may be related to my winter tires.
when the iwe is half way engaged the clicking you hear is when the gears are hitting so the gears on the hub become damaged therefore leading to hub replacement.
Do you have links for the vacuum hub and wheel bearings that you used? I'm looking to buy and there are so many different ones on the market.
These are OEM Motorcraft from rockauto.com
Did you replace the ABS ring while you were in there?
that is part of the cv axle ive never ran across such a thing yet but a good visual inspection will tell the tale.
Long shot on an answer but did you need to grease up any part
Good question. All the parts come pre-greased and ready to install 👍
@@ValleyMobileAutomotive my mentors always said make sure you clean the area before installing the new parts and apply xg-11 grease to the needle bearings inside the hbu assembly because -the manufacturer skimp-s out on such things.