SuperATV Terminator Max Mud Tire Review | Extreme Mud Testing and True Specs!
Vložit
- čas přidán 7. 07. 2024
- Like, Comment, Share, and Subscribe!!
This week on Let Dirt Fly, we check out the SuperATV Terminator Max tires! In this review we have a 30” set we mount up to our 2019 Can-Am Outlander 650 XMR. We go over all the specs as well as put them deep in some nasty mud!
Save money on the products we us! Use our discount codes below:
- Perfex Industries 10% Savings : Letdirtfly10
- TowCord Timmy 10% Savings : LetDirtFly
- Dooplicator 10% Savings : LETDIRTFLY
- Fodsports 12% Savings: LETDIRTFLY
- Kong Motorsport 15% Savings : #LDF
Follow Us On:
Instagram - letdirtfly...
Facebook - / letdirtfly
Subscribe to our friends!
@ADVENTURESThisWay
@AmotorB
@j-muddy93
@theben4x4
@ScootersGarageYT
@XMR_Mudding_420
@loudnproudatv3502
Sponsors, Affiliates and Supporters:
- Perfex
- Quad Logic
- DP Brakes
- Kong Motorsport
- FodSports
- Novawinch
- Dooplicator!
- Towcord Timmy - Auta a dopravní prostředky
Looks like a decent tire. I have the same rims on my xmr. Nice test and review. 👍.
do u guys have risers? i hear that helps with chatter and the stearing stem upgrade u can do.
i was going to go mud testing today but its 40c humidex out. too hot for my air cooled bike. these tires seem to work well.
can you review the intimidator tires 🙏🏽
What exaust is that if you don’t mind me asking ?
If you had a grizzly 700 xtr, how would these compare between 30 aztex, motoslayers, or sludgehammers? I’m finding more and more videos on good tires and I just can’t decide. I do a bit of everything riding. Road riding to the trail that goes to the mud holes and most of the holes are soft bottomless marsh mud
Haven't had a chance to ride the motoslayers or sledgehammer tires yet. The teraches are lighter and thinner, and we all know they pull hard. Heard hid things about the motoslayers, but nothing spectacular. Again the sledgehammers are a beefed up mudzilla by appearance.
What risers are you running I like the low profile of them my wife’s 570 is in need of a set of risers
This quad actually just has aftermarket bars and some 1/2” spacers with longer bolts under the mounts for the bars. On Marshall’s 850, he runs Rox 2” risers with pro taper bars
@@LetDirtFly good info thank you, also what snorkles is marshal running on his 650?
Might be an interesting contender for my next choice, I have a xmr 700 I’m going to run 32s on. I know Seth is a big aztex fan, how would he rate these to them? 700 is a good crawler if you’ve never been on one. Tried a friends 32 assassinators this past weekend for a day and it pulls them well, I can tell a few time in high they were there but low it turns them great. Was thinking about aztex, sassy, or maybe these. Any thoughts or opinions?
They are similar in many aspects. They are wider and heavier, but work well. They do seem to push more in the turns. The Aztex are the lightest, sassy's pull the hardest in the mud. haven't put enough time on these tires yet. We will be putting some time on them at stuck in the muck this weekend so stay tuned for that.
@@sethharman3006 definitely will do! I’m trying to make a choice within the next few weeks for sure. Still might lean on aztex. 700 has great low end torque and turns tires really well but I will admit it’s not really a “wheel speed” machine if that makes any sense at all. I’m in eastern nc so most of my riding is Busco (main) and surrounding places like deep creek etc. going to river neck in SC this weekend gonna see how that spot is.
I got 32 in aztex on my 700 xmr and they are amazing in thick mud and crawling out. I have a few videos on my page if your curious
i imagine they bog it down lol. u got 30' superatv's on the poor old girl lol. i so wish i could come play too lol.
10psi seems like a lot but they are 30's i guess. i use 4-7 psi. with the 28' executioners i had they were run flats so i always had 4psi in them. keep in mind though it was all trail and woods not much road.
These are 6 ply so you need to add more to keep the side wall up. I usually run 2-5 in 8ply and 5-10 in 6 ply
the test i went on concluded i need bigger jets. so change them out and then back out and first video maybe if i can get it to stop backfireing. it ruins the shots.
Next test.. skimming😬
Of course 🤘🏼
this weekend we will test them.
Ok what kind of tape measure is that for that to be 5 inches bc that is at least 12 maybe even 14
What? We were talking about lug separation not wheel size. Wheel size is 14”
He was using a standard measuring tape, it's off a little from the bedside measuring tape 😂👍
@@LetDirtFly ok I was confused how it was that small
@@chrisgoetz3889 ok I knew it look a little bit big
im at 8;45. if u had less air it would have been no issue. i am not pestering just advice.
That is just new silverbacks basically
Similar sidewall but very different tread. We’ve always wanted to test a set of them
@@LetDirtFly same tread pattern as well
I do agree they’re similar because they’re both a “V” pattern, but the tread itself is completely different.