Subaru Engine Build (ASMR)
Vložit
- čas přidán 8. 03. 2019
- My Subaru Forester XT motor has lasted 147k hard miles, after losing compression on Cylinder #4 it was time to build a new engine. Without hesitation, Andrewtech Automotive was there ready to build a much stronger, forged engine.
Rather than showing you this process in an over stimulated video, we decided to simplify things a bit and cut out the excess. We filmed this entire video in silence so that you could hear the slew of different sounds that emit from an engine assembling process. We put a professional grade microphone up close to hear some quite amazing sounds that you wouldn't normally hear with your own ears. I'm very excited to release this ASMR style video, and I hope you enjoy!
Huge thanks to Andrewtech Automotive for dealing with me filming this engine build in silence and doing a great job! I'd highly recommend them if you're looking to have an engine built.
Also, special thanks to TurboXS for helping make this engine something that I can rely on!
Andrewtech Automotive can be reached at www.andrewtechautomotive.com/
TurboXS can be reached at turboxs.com/
Music:
First Innocence Solitude
app.soundstripe.com/songs/1337
Primary camera gear that we film with:
Panasonic S1h with MC1 adaptor
amzn.to/3G918cO
Panasonic S1
amzn.to/3HajZ8q
Gopro Hero 9
amzn.to/35vHU4s
Rode VidoeMicro
amzn.to/3g4YpGA
Rode mic go
amzn.to/3rVWeeb
Sandisk Extreme Pro 300mbs
amzn.to/3g6vn9H
Ronin Rs2
amzn.to/32FStAU
Canon 24-105
amzn.to/33VIKXK
Canon 70-200
amzn.to/35k3lFo
Rokinon 35mm
amzn.to/35krZpq
Rokinon 14mm
amzn.to/3Gej9GM
Sigma 35mm
amzn.to/3II1NU7 - Auta a dopravní prostředky
ASMR mechanic work? Unlikely. Because every 10 seconds I'm yelling, cursing and asking where my damn 10 mm went
Colin Campbell “it’s in your hand dad”
Accurate
8mm and 10mm are the worst, they just disappear every 2 seconds
Or 12mm
The infamous 10mm
How can a shop be THIS quiet!?
@@object5711 no that is bad grammar
I used to work in a body shop. In the main area? Dudes were screaming at the cars and each other nonstop. In my area? It was always silence or music. I loved it so much more than being with the other mechanics.
@@jacobteter2893 bet everybody had hearing issues. Would hate too work there.
Probably was filmed at night or after hours
That's because the "asmr" sounds are added in post-production OMEGALUL
-knock knock.
-who's there?
-the 4th cylinder.
-The 4th cylinder wh-
-*POP*
-are you shitin me!
This is an underrated comment
Ля, даже тут есть эти дибильные шутки про четвёртый цилиндр
@@Sn3zhkov а что хотел?
And where is the house he is knocking on? Outer space?
When you own a Subaru, being able to rebuild an engine is a good skill to have.
bravofighter nah. 250,000 on my na Forester and still runs just fine. Just little maintenance every few months
Jessy Jacobson you just got lucky 😂
deutsche auto fabrikate
Facts
At the very least pulling the motor for plugs n packs
That electronic torque wrench isn’t nearly as satisfying as a ka-CLICK
👌 so true
i hate our torque wrenches at work despite being snap on they make an ear piercing TINK sound and they literally hurt your ears lol
shineything4444 "Hurt your ears" come on... Then are you shift to next gear always at 2000 RPM because it hurt your ears too?
truuuuu
Well, the click is one thing, but I like being able to creep up to the torque on critical fasteners. You can also do rolling torque with that torque wrench and angles. It really is several tools in one.
A shop that specializes in rebuilding Subaru engines? Now that’s job security 😝
Caleb O'Malley lol
That's the damn truth I got the base engine in a freaking Forester damn head gasket popped again what brand of head gaskets are these guys using?
damn driver side head gasket again....
@@jamesstacey529 I've heard mywrxchannel and others say great things about Grimmspeed gaskets
@@jamesstacey529 get your heads resurfaced.
Garrett Luluquisin Thanks for reply, Yes both heads were resurfaced .. I used five star gaskets
People in the comments: Joking about how Subarus need rebuilds often.
Mazda Rotary Engine: "Hold my Doritos."
As an ex Mazda RX2 owner, and as a current Subaru owner I can really appreciate your comment. I am a sucker for punishment...
There are two words you never say to a rotary owner and those are “apex seals”
To be fair though they're much easier to rebuild.
Air cooled engine: “First time?”
I genuinely feel bad for you guys in the us.
Got a ej25 for the sake of more performance,just to prove damn unreliable and in some cases, making even less hp than ej20s. Poor guys lol.
Didn’t loose 10mm
Didn’t curse
Isn’t angry
0/10 isn’t ASMR enough
Weird, theres actiually no explosions, falling tools and blood on tools
Impacts didn't go 2 ugga juggas. Not satisfied
@@leobow3333 theres blood on a lot of my tools lol
@@hellothere-xz7kf A small price to pay, "everyone has blood on at least something of theirs or they didnt do it right"
My boss said this when I was rotating tires at my first job.
All the cursing is done during disassembly 😂
Edit: For those of you wondering what the green threads are, it is plastigage; used for measuring oil clearance on the bearings.
Aμz thanks, I was looking for this comment
Thanks Capt!
probably a few bits along with some rtv turn up on the gauze of the oil pick up after a few miles....dont understand why some stretch bolts were dipped in oil also....i thought bad practise?
thanks a lot
@@kaisersoze5236 Lubrication helps ensure consistent stretch/torque values. Torque specs usually specify if a bolt should be lubed.
installing a crankshaft into stepsister's engine (POV)
Thats fuggin funny.
Wife gets rod bolts torqued while husband films
@@mikeymike2552 wife's pistons get flooded while her step bro engages the clutch
Brazzers
Well lubbed.
Girls ASMR: "Eating carrot ASMR"
Mans ASMR :
Hell yea
Fuck yea
Um, not true.
idek anymore always that one nigga 😂🤦🏻♂️
@@crispyfurburgerthe4th669 not a nigga.
Let's be honest
This was not on your reccomended
You searched for this
yo buscaba asmr de aozora subaru
Well kinda... put in asmr, and youtube provided.
Nope
It was in my recommendation the first time but yeah I searched for it all the other times
I wanted to see subaru from Hololive
An engine assembly is always appreciated.
IKR, and this shit was so satisfying and paid really close attention to detail, always a very appreciated idea!!!
Yeah this was actually pretty phenom.
I was your 2000th subscriber be happy boi
I didn’t know how to build an engine but after watching this I still have no idea how.
lmao nice 😁
I am a Polymath what are the basics?
Kevin Ruiz don’t worry because this vid doesn’t show nearly enough I’ve done it before and I was lost what was going on at the end
Softly, just like in the video
Well you stick the doodad on the dohicky and torque it down to about 3 grunts and repeat.
I've been at this shop just last week. Great customer service and the guy in the video was who I spoke with. AndrewTech Automotive, they are located in Gaithersburg, MD. Co-worker of mine recommended me to them. Great video!
0:27 thanks for showing me that
You made an ASMR video without a clicking torque wrench?
The beeping and lights from the digital torque wrench gave me tingles tho
@@dinocat7490 😂😂🤣
Manuel Agras lolz 😝
Thank you, i knew i wasen't the only one.
5:59 8:51
i thought porn wasnt allowed on CZcams
It is if you know where to look ;)
Looks like he checked the right spot then
indeed
PocketDrummer I agree
For real. Awesome video. I wish it was longer
2:29
me: whats wrong with my car
mechanic: a tiny bit of green string gave way
was wondering what that was. Could you please explain? :)
@@polostone8876 It plastigauge, the crankshaft is torqued to spec and it compresses the string. Then you remove the crankshaft again and look how stretched the string is using the measuring tape you saw in the video. A certain amount of stretch relates to a certain clearance between the shaft and the bearing. If this is not in spec you must sand down the bearing or buy bigger ones. So the string is the tool to measure it
@@andries4561 thanks a lot mate!
@@polostone8876 It's a reaaaally precise matter but vital for your engine, if not enough, engine breakes, if too much, oil consuming, and engine also breakes
@@andries4561 thanks Im supposed to be studying for my exam in 20 mins and this will be on it!
This has to be the best kind of asmr especially to a car enthusiast like me
Bro, you’re a car enthusiast bro?
That’s crazy bro, that you are a car enthusiast bro
Everyone on this channel is a car enthusiast bro😂
You know Humans have reached peak evolution when there's an asmr on building an engine
Heh boi
Lol true
You mean peak revolutions ;)
Not yet. Wait till NASA releases ASMR videos on building rocket propulsion systems.
Evolution?can you provide a cockroach evolving from a 🍌,this is a beautiful work of grace of God giving us the ability to live our life fun with Christ bro,i love you in Christ and may Gods presence, wisdom and love be with you all now and forevermore.
There needs to be more ASMR engine builds. Kinda weird to say, but i find them strangely soothing
JDMlatino these are honestly great but knowing what engine it is makes me sad they wasted their time hahahaha
@@Christian_Bonsai just be honest, we came here just for entertainment of machine building xD
yep
About two minutes in I was thinking "I still prefer time-lapse videos", but then the satisfaction took hold of me...
Just somthing so beautiful when all these mechanical parts are all made for eachother and work in precise and perfect harmony with one another
That's a fancy torque wrench. Mine just clicks angrily at me when I overtorque...
Even that is advanced for me lol
Mine moans
His needs batteries, yours does not.
Boss Man where can I get one off those 😂
@@coochieman9742 Oklahoma ardmore Walmart
This is the only kind of ASMR I'll watch
same lol
i literally just said the exact same thing word for word outloud to myself like an idiot
Subi Performance, all he does is this and his builds are way cleaner and methodical.
Fuck yes not food munchers 😂😂
wink..
Probably the best 10 minutes I've ever spent on YT. People who disliked probably can't afford a pair of headphones or something.
that sound when the cylinder slips in, pure asmr satisfaction.
Not an accurate representation of a mechanic he didn’t lose his 10mm
you have never touched a real car in your entire life
Quii are u dumb or sthg ?
Il Dxnny lI yeah ik 🤔
@@quii2035 Chicken leg
True even i lose my 10mm
Legend has it. It blew the head gaskets 75 miles after install. ❤️
Frustration... it’s what makes a Subaru, a Subaru
Trash motor
i've seen a Swedish mechanic machining thin grooves around the cylinder heads to make a housing for a copper wire ring, which will give a bit extra pressure to the gasket where it needs most.he said that it is possible to perform if the cylinder head is measured 100% flat digitally.
@@ZAKIRHUSSAIN-vq2ml thats a nice fact
@Merl Klarhoelter but then what about when the new gasket blows as soon as he fires it up?
ZAKIR HUSSAIN you are talking about Subi performance. He is German. But his work is levels above this. And those engines last. No plasti gage and dirty bench.
I like how when he wiped his hands with the towel nothing came off the gloves
Every torque wrench moment "make the Noise?"
James May would love this.
Rip
@@cop-killer-james may isn’t dead
I hope you all enjoy the video! What was your favorite sound? I really liked hearing the assembly line being put on the bearings and the head studs being tightened.
My favorite is the confirmation beep on the torque wrench because you know it’s perfectly torqued
I really hope you get a decent mileage from this engine, I did not like the apparent lack of oil used in the build. The sound of the piston rings on dry bores was a real worry. Good luck with it though. What were the power figures after the build?
Unpacking is the best ASMR!
5:22 gave me goosebumps
The boxer rumble when it's finished ^^
Wow, this was so much work to film - all those setups for all those shots. So beautiful. I nominate this for the academy award for best automotive short!
1:30 woke everyone right the hell up. So did the music at the end.
All that silence and wrenching made that boxer rumble at the end so satisfying.
Wow. Once again I see Gears and Gasoline giving the world great content. Thanks for this video. Definitely rewatching after my girlfriend leaves my room 😁😁😁
Classic 🤣
Get her to help!🤣
Myna Imrie she's not that much of a car person 😂😂😂
@@sendsomepsyche that sucks. Her loss.👍
Myna Imrie it's fine. 😁 She makes up for it with her cooking and jokes
My grandpa told me that the Subaru flat 4 is a great engine because it's so simple and the only one that he could remember how everything came apart and where each minor detail went. After watching this I can definitely see how he came to that conclusion it is very neatly laid out, nice video.
A great engine is one where you don't know any of that because you've never had to take it apart
Excellent video. Letting us hear her run was the perfect ending! Thank you for taking the time to make this video.
As a subie owner this video really tickled my pickle
Same
Andrew C did it gargle your marbles
Andrew C now you have an instructional video for doing monthly maintenance
BOPPE funny thing is i blew a motor last month 😂
@@boppe2235 😂
Asmr will be all over my recommended now lol
That's the opposite of ASMR? I want to confuse the algorithm
@@DonaldREdman-wj7jy Ear rape videos
As a petrolhead and an asmr fan this was the best thing ever
This video really makes working on a car look like an art form. Beautiful stuff coming from this channel you guys keep it up.
the next asmr will be: "subaru engine 4-th cylinder breaking after 50.000 km and beating ASMR"
715CREW supposed to laugh ?
Hey Its Me Derek jealous ?
Hey Its Me Derek who wants 400hp in a crossover lmfao.
@@dim33_27 who wouldnt ?
@@dim33_27 wooosh
This is just satisfying for me to see an engine rebuild in 4K
Watching people work on stuff like this is in another level of satisfaction. It feels like they give a soul to the machines they create.
I remember when I first watched this I was so confused because I knew a little about engines, but not enough to know what a boxer engine was. So watching it a few years later and knowing exactly what he’s doing and why is kinda cool.
Now I know how to rebuild my engine when it explodes, and I’m relaxed
And you know who to call when a piston comes through the window and you get hospitalized and can no longer rebuild the engine.
Did not expect to find you here flimsy😳
Fix_it_Felix haii
floof
Never knew an engine rebuilt video could be so relaxing...love it!
This was eye-candy!! I can't thank you enough, an amazing video that captures the beauty.
This is the first of 10 videos that i would like, but i saw that i had already liked it. simple and direct congratulations
As a fan of Mopar and Muscle cars in general, I am forever fascinated by the size of these Subaru engines. They pack such a powerful punch while they are so compact. The only thing I can really relate to this is my v45 Honda Magna, but even then, that's a MOTORCYCLE!!!! This engine is going in a whole car! Incredible. Thanks for the awesome tear down video. Interesting to learn new things about engines that I have never even figured I would work on before let along see the inside of at all.
i never understood what people got out of asmr until now, as a mechanic myself i found this very interesting.
Very rarely do I enjoy a video as much I have enjoyed this one. Thank you Andrewtech.
Great video-love the no talking! Just assembly sounds calm and peaceful working with clean new parts!
You make engine building look very Zen like! Thanks for doing something different and congrats to a new beautiful motor! Well done!
This video is fake I work at a mechanic shop and I can’t go 15 min without cussing and yelling after dropping a socket or something small in to the engine bay only for it never to be seen again
I wonder how many cars are driving around with a 10mm wedged somewhere in the engine bay
Kim Johnny Johnsen personally its to many to remember 😂
Kim Johnny Johnsen Every single pre-2000s car probably has a 10mm trapped somewhere in the engine bay.
Literally dropped a 5/8" sparkplug socket 2 days ago changing sparkplugs. No idea where it went.
I always wondered did all my socket went inside my engine??
Perfect way to start a Saturday morning
So good... I can actually hear the head gasket fail 😫
Thank you for this video and this awesome style. Hopefully it becomes a norm on CZcams. Great job.
I feel like I just watched a fairy tale with a happy ending.
Great work guys!
thetedmang you did!
12 months ago, I never would have thought that I'd be appreciating this kind of stuff.
Now that I work for Subaru, I find beauty in the boxer. Granted, I'd still love this kind of content if it were any other engine.
Quality work there, lads. Quality work.
Hah, what beauty? It's a horrible engine that has been in use for way too long. Subaru doesn't care though cause they probably make more money off servicing them than selling the actual cars.
Hmm, looks like you're upset. Ah well.
Username 1991 meh. It's my opinion, you don't have to agree with it.
Malevolution yes, I am upset because I own one of these "beautiful" engines in my car and I have to work on it. You work for Subaru, you should know what it's really like.
Malevolution hell the only appreciation any Subaru engine gets from me is the one sitting in fourwheeler outside and hell they just designed it Yamaha made the damn thing
Loved the silence of the building process. Made it feel epic to me.
idk why but this is the only asmr video i actually love like it legit gives me chills
That was...Strangely relaxing and calming.
I almost fell asleep haha
Potentially the only Subaru Forester I wouldn't mind being stuck behind on a back road... Thanks for that guys... Saturday morning coffee video for sure!
Nice job, well done, people in your town are so lucky to have such great pro mechanic 👨🔧
As a student engineer, this looks like so much fun XD the precision work makes it so interesting
How much for all the parts?
How many hours?
I'm really curious
aboot threefifty
Yes
Dam loch Ness monster!
Gonna need about tree fiddy
three dollars
fifty cents
Engine assemblies are always satisfying😍
I keep coming back to this video, it's one of the best ever posted to CZcams.
Wouldn’t have skipped the ad if I knew it was going to be this enjoyable 🤤 10/10 would see again. Video gets my like
I'm a simple man I see gears and gasoline posted new vid I click it thx for the great content you guys never disappoint
I never thought I'd finally find my two loves meshed into one perfect video! We need more of this, this needs to be funded
This should just be called building a time bomb
71st like
Another badly informed person repeating the garbage he has heard on the internet, boring the people that know that with proper maintenance and well thought out engineering (no hillbilly tuning for fuck’s sake...) you can make true monsters out of these cars.
Claudy Focan Can u take a joke
@@claudyfocan731 another 50 year old dad that is just complaining everything on internet
@@claudyfocan731 I think he means cause the guy straight up fucks up the engine in video. You can literally see him damaging the piston rings in the video.
My first ever asmr video and I didn’t know I needed this until now
Truly mesmerizing.... And I'm not even a Subaru guy! As an audiophile I very much appreciated the spectacular sound quality. I loved the crispness of all the sounds from the ratchet to the Head studs dropping in to their stop in the bottom end. Bravo!
You guys just made my night a little better
To be completly honest, at first i was unsure what to think of the video ideea. But now i find it quiet satisfying. It summs up the part that makes beeing a mechanic in your free time verry nice. Peacefully assembling something without interruotance of anyone or anything and just enjoying the work and the nice tools.
Holy shit watching this guy just makes me appreciate Andy from Subi Performance even more. It's crazy how skilled and how much passion Andy has. These guys did a great job as well.
Could not get any better engine build in 4k with relaxing music playing remarkable.
The cinematography is amazing as always, thank you for making this masterpiece, good visual of the motor running my wrx 🙏
This was such a good educational video, and without a word to be spoken
I can’t even take of a single bolt without saying at least four cuss words and this mans just built and engine in silence...that is a level of patience that I don’t think anyone else can match.
Giving respect to Gears and Gasoline from Jamaica. Always love the content,editing,commentary and video quality. The no dialogue approach here was a very good idea. Was satisfying hearing all the metallic sounds. Once again,good job.
This vid is just soo calming.. Could watch for hours.. Thanks
Ughhhhh, this is so therapeutic. I’m salivating 🫢
The asmr was soothing and all, but I’d have to say the best sound was the purr of the engine🥵🥵
The only good asmr is car asmr
@@javierpernul3150 jesus christ where'd you pull that one from? Your ass?
@@javierpernul3150 LMFAO DNFDSN
Vicente Maroto go to church asshole, stop watching porn
Not much around tbh
when you think you already saw everything, that is it, someone uploaded an ASMR of subaru engine being build.
now your life is complete.
This is so well done. I was literally hypnotized
Most relaxing engine build ever thank you
This is the most beautiful thing that I have seen in my life!
Amazing video! Im not into ASMR, but this is truly personifies the mechanics of an engine. Well done! 👍🏻
This was pure art from start to finish
If there was a ten thousand like button I would have clicked it ten thousand time
Amazing video and editing. Please make more videos like this for different engines.
I really enjoyed every minute of it.
Finally, some ASMR that makes sense.
This was really good, also enjoyed the music at the end
Thank you
This video is so relaxing to watch
I keep on coming back to this video, thank you for making it