Fully Built Subaru STi Engine | ASMR
Vložit
- čas přidán 25. 04. 2024
- Enter to win this STi: www.dvniemela.com
• Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
As an eBay Partner, I may be compensated if you make a purchase
Amazon: amzn.to/2z6hMbF
• Camera Equipment I Use:
Main Camera: amzn.to/2W2ZLId
Backup Camera: amzn.to/3gMgjwj
Go Pro: amzn.to/31Yi59n
Main Lens: amzn.to/2ZX7ZTB
Backup Lens: amzn.to/2W2OgAM
Photo Lens: amzn.to/2O8sc35
Microphone: amzn.to/31ZRDfo
Drone: amzn.to/3iMOIwJ
Gimbal: amzn.to/321daUZ
• Instagram: / dvniemela
• Facebook: / dvniemela
• Sponsors: (Discount Codes)
avalonking.com/ref/dvniemela (DEVIN25)
SK Tools: bit.ly/3mdXhSl (DVNIEMELA)
IAA: bit.ly/3cMmRKk (DEVIN23)
www.braumracing.com (DVNIEMELA)
www.prismaticpowders.com - Auta a dopravní prostředky
Man, thank you for all the entertainment over the past few years. I’m so glad I found this channel.
Thoroughly enjoyed watching this. None of this annoying music or voice-overs, just the satisfying click of a torque wrench and the sound of a master engineer at work.
ASMR engine assembly 😆
Real relaxing
This is some of the most dialed-in precision work I've ever seen. This is addiction, and this is the best form of what addiction is.
I'm getting this Guy over to the UK next time I Hydrolock my engine! The level of detail and knowledge on the EJ25 is beyond excellent 👌
He's not that precise, calm down.
He did make some mistakes. For example he torqued the rod bolts instead of stretch them. Rod bearing will go if he pushes alot of power through it.
Going to make an ASMR EJ build myself here soon.
Aisin timing kit should have been used. That's another weak point.
Also he forgot to put the water pump hard lines behind the tensioner. Those will be a bitch to install later.
@@saabaru2248arp torques once, not torque to yield like stock
you're talking about precision? you don't use a reduction with a torque wrench. it distorts the torque. you can turn a blind eye to other things, but certainly not to internal engine measures such as connecting rods.
What a good looking motor. Looked like a peaceful day of building
Sincere question from someone who has never done anything like this: Would this actually be doable in a day, if you knew what you were doing? I have watched quite a few engine build videos but it's sometimes hard to judge, especially because you don't know how much has been cut and if every step was included in the video. Just curious how long this would take on average, for someone with at least some experience
In any case, looks like a lot of fun, I can imagine it being therapeutic indeed
One of the most satisfying videos to watch
This video was exactly what I needed after a stressful week. Just watching a EJ motor get built in silence. Magical. (Minus the gates timing kit!) Thanks for this!
Devin, thanks for all the videos over the years. Glad to see you still enjoying the builds. Take care and best wishes for you, Bobby and your families. Peace bro and live it up!
Didn’t know I needed this in my life, I enjoy all your videos but this was awesome! Thank you!
I don’t think I’ve ever came across someone so motivated and dedicated in my 25 years on this earth. Truly inspiring and I mean that from the bottom of my heart.
So very Chad of you
Best type of video straight work no talking
Excelent work Dev. this is so exciting ! congrats man!
So satisfying. Thanks Devin!🫡🫡👌🏽🔥🔥
That built engine is pure metal eye candy! Thanks for all that you do in your videos Devin!
Tremendous quality of video, congrats!!
Sooo clean! Lovin the build brother! ✨🤙🏼
Great job, always enjoy watching your builds! Have you ever thought about building a MazdaSpeed 3?
This would be sick I just finished my 2013 Mazda speed 3 build car is making 632hp took months but it’s finally done and drive able.
@@toothpicka1468Dang that’s awesome man! I’m working on rebuilding my RX-8 Rn. Parts just came in today!
But I I’m interested in getting a new daily. So I’ve been eyeballing the speed 3. Lots of aftermarket support for them too!
@@modernblitz thanks man good luck with your build. I’ve been a Honda and Subaru guy pretty much since I started. I have no idea why I slept on the speed 3 for so long. People says it’s expensive but my built motor is a 2.5l. Spent $300 on it out of a junk yard ford fusion everything said and done costed me 7k.
super relaxing to see all the assembly 🙌🏽
This is a skilled man , I don’t know anyone else works as hard as this dude
One of the best videos i have ever watched.
Hands down 10/10.
So relaxing. May God continue to bless you @devin
That’s a top quality video! Asmr. Really cool Devin.
This is totally my ASMR. Just quite background with the sounds of assembly and the tools used.
Excellent work..so relaxing to watch...well done..
No talking just a master at work. ✅
after a long day in the workshop, this was peaceful to watch lol the irony of it being an engine assembly in a workshop 😅🥹🥹
So satisfying. So captivating!
You do not become a wizard over nite..
Great videos Devin Niemela !!!
I needed to see this to motivate me to get my engine off the stand and back into my foz. Thanks ❤❤❤❤❤❤❤❤
they really are cool little engines.
totally focused on the task good for you devin
Thanks I need this…..and can’t wait to be ripping this beast in New Jersey ….awesome build and content
A huge fan of boxer engine. One of the most interesting concepts about cars engine in my opinion. Congrats for the work! Regards from Brazil. 👏🏼👏🏼👏🏼
Quality all the way. Great attention to detail
Always doin great work! 🤙🤙
No words needed!!!!! 💯🔥🔥🔥🔥🤘🏻👊🏻 (Insert first bump sounds effect) 😁
Always good to see my Boi do his thing
This man doesn't play around!!!! 👌 content
Hi Devin I feel you should do a video of all the parts required for a engine rebuild including all seals and gaskets
Amazing work what a good looking motor
So satisfying keep it up
Beautiful work, bro
These ASMR engine build videos are 🔥🔥🔥🔥🔥
Thank you for such a satisfying video. You're such a an inspiration. How did it cost for building this entire engine (including parts and engine block)
❤️ the ASMR style videos
Devin, would be cool if you made a whole series of videos like this for each and every 4-banger 👍
Amazing build bro
Something about assembling an ej257 gets me every time. This inspires me😂
The no talkie talk vid is almost meditation for guys
Que gozada de motor y que gozada de mecánico, limpio, ordenado y siguiendo toda la secuencia de montaje paso a paso y comprobando todos los ajustes. Perfecto.
Super cool I always enjoy these
The gates timing kit is no good. They supply Chinese bearings with the kit. Aisin kit uses oem NTN bearings
I can watch this all day
Sweetness. Thats going to be a unit right there.
Devin is the goat with content 🔥🔥
Absolute perfection a pleasure to watch 👌
such a special video i want to own one of your builds so badly top tier effort
always a pleasure to watch!!!❤
This is wildly impressive.
I have never seen a boxer engine apart. This was educational for me. When you were installing the retainers for the wrist pin I was thinking " Holy nerves of iron, Batman, if he drops that he might have to take the crank case apart."
pure entertaining video
Happy victory and viewer appreciation ❤
Very cool build looks bulky, also The torque to ft lbs wrench looks legit 🏎🏎
well done .... put it on a stand in your house pure art 👍👍👍👍👍👍
Very neat work.
You truly are the man
Great fan of the ASMR videos, keep it up!
Wow that was great to see. Thanks. Originally a Ford RS Escort guy who rebuilt and modded his 1.6l Pinto on a Mk 2 RS Mexico then moved to the original Mk 3 Escort turbo, before switching to a 1999 Impreza WRX Turbo in Switzerland and in 2013 to a WRX STi and then to an Auto XV Hybrid after a stroke in 2019 - I enjoyed this immensely but was a bit confused by how the Gudgeon pins and surclips were inserted - very strange
Neither one of us said a word for those 19 mins. it was beautiful.
I'm obsessed with this, I'd be living a dream if I could do this all day every day.
Love the asmr video 👍
one of my favorite things to do in life, watch your content.
This actualy is a good ASMR video..
When measuring the cylinders the block should be torqued with a torque plate.
U are fire buddy awesome channel 💪👍
Killin it buddy. I love the progression. Keep up the great content. One thing I’ve noticed that might contribute to a leaking rear main is squeezing it in place rather than driving it in place. Not for sure on it though. #shebuilt
Stay putting out videos. Ima stay watching it.
Beautiful building 👌
excellent video: did i miss how the conrods and pistons went together?
Great good work❤
Im speechless. wow Devin,mad props man.. THANKS FOR THE ASMR!! Hopefully we get more of those too.. God bless🙏🏼🙏🏼🙏🏼💪🏼💪🏼🔥🔥🥵🥵❤️
This car is going to be badass! Would love to drive it
Looking at this engine.... an people are saying that an EV is not environmentally friendly to produce when the fact is that there are over 2000 parts for an ICE and around 30 parts for an EV Motor. Nice job on building the engine
Brilliant job, most people don't realise what goes in to an engine.
I finished my build not that long ago. I regret spending the extra bucks on forged internals and a billet block. After realizing that no matter what you do, the EJ engine cannot be made reliable, I concluded that this is a labor of love. Oh and a money pit that the wife does not at all enjoy 😂
good job man 👍💪
Wow it looks ready to rip up the asphalt
Que belleza de video 👏🏼
Good job 👍
Damn man! I love it. ❤
Awesome. more videos like this and I might actually subscribe. 🙂
I'd like to see a list of the specialty tools that were need
What did you calculate for the torque in the beginning? Would you explain to me? How did you you come up with it?
Never watched a Subaru engine being built before … I was so confused on how’d you get the wrist pins in with the rods installed on the crank and in the block lol very interesting design
Bro, I literally wanted to keep watching 😮💨😫😫
Отличная сборка👍👍👍
This is a good one
It’s the freaking art! ;)
Man please make a video on how exactly you do all of your bearing clearances, would love a more in depth explanation on all of that
I wanted to know if you think something is wrong with supporting the head of your torque wrench when tightening fasteners? Do you feel you're getting an accurate torque when you don't support the head? Especially when you use an extension and let it pull to one side at an angle?
I ask this because I noticed through the entire engine assembly that you are making it a point not to touch the torque wrench head. At times, you would be supporting the wrench, and just before it reached final torque, you would remove your hand completely.
That when i told you was a year after they come out had diffrent setup though big 3 inch pipe turbo whole nine yards 6:55
Nice ASMR man..
great build
now, where can I see this engine in action?