Yamaha blaster kick start spring repair
Vložit
- čas přidán 2. 02. 2013
- Quick video to help anyone out having problems with their yamaha blaster kick start after taking the crank case off and loosing the spring tension! REMEMBER!! Always put it back together fully without any oil just incase you have done it incorrectly and have to drain the oil again. Once back together, disconnect the spark plug lead and crank engine over manually to test, then once happy top up with 650ml of oil (your choice). Please note I am not held responsible for any loss or damage of your equipment or quad, or damage to yourself! Enjoy and hope this helps!
- Auta a dopravní prostředky
Thank you!!! I was searching the internet on properly installing the kickstart shaft and was having no luck, until I found your video!!!
thanks very much mate, you have saved my skin, changed my clutch on my ybr and the kick start came out , didn't know how it goes back in but now I do !! thanks
Thanks I had some issues removing the oil pump and this was a life saver.
Absolutely amazing thankyou I put the sod on 3 times everytime I tightened everything up to see if the kick wont wobble about then tapped out asked Google and you was the first thanks dude I was looking about to see if I dropped anything shes back together and smashing it thanks bro saved me so much headache 😂😂
No problem at all, glad it's still helping people after all this time ❤
Awesome. Your video was the first to show the issue. The accent was an added plus, although I had difficulty understanding every word :-) , you showed exactly what to do. Nobody else on youtube did, they all failed. Thank you sir, you are a night-saver ! I was ready to spend a night at the garage to fix the darn thing until I found this. BIG Thank you !
Thankyou for your kind words. Unfortunately I'm not very good Infront of a camera and don't like my own voice haha but I'm glad this helped you. All the best
Thanks so much this was clear and easy to follow, subbed 👍
Thank you for the help man I couldn’t figure that out for the life of me.
Thanks man for whatever reason I couldn't figure it out an you made it simple I appreciate it sir
No problem dude, This was some time ago now lol. I miss that quad tbh.
tanx man i had problem installing the spring back good tip brother
Excellent tip brotha. Good kick starter ass. Basics
Thanks bro! Took mine apart last night and got stuck. Now you helped me!!!
Video just saved my ass . Thank you much
Legend!! So ive got to take the thing out
dude you a legend thanks for the help
helpfull video!! thanks 4 posting it
when I went to take out the other one it came out with the casing and everything so I didn't see how it hooked up
Thanks, I like your vid btw
Do u know what could be the problem on yamaha banshee whe the kick start got stuck
Dude...thank you so much...this worked on my dt200lc...i was going crazy...
No problem my friend
me sirvio para un dt 125 . ty
do you know if any other kick start lever will fit on the blaster?
helped me out thanks man
Thank you man!
Thank you!
Thanks a bunch man
Doest the little thing next to that stopper need to be tight or loose
Nice video
You rock! Thankyou
No problem matey.
Hay my friend my name id mark an i jost purchased a Polaris 250 and it needs work and the one thing that is hard to move is the kick start you think the spring is out of wack in the crank case get back with me mark thanks
hey bro i just got a Kawasaki 250 quad...an the kick starter is really and i mean really hard to push down...ive had penty soooo i know how to start them..i was just wondering what could it be...it runs good thoe
Thank your the best keep up
CAN I USE OTHER BIKE SPRING IN MY BIKE?????/
I done this and when I put my case back on my kick start wouldn't retract to the start position..what should I do?
does anyone out there have a video showing me how to put the crank start shaft into a 2002 Yamaha pw80
Thanks you so fvcking much dude. The quality its a bit poor but the video is so much useful. I will repais this on muy own thanks to you!
Is this the same for dirtbikes?
Kawasaki 85 btw
THANK YOU!
Pleasure
Get a magnet tripod it'll help you with your videos btw awesome video
Does anybody know how can I fine the owners menú,?
Thanks 😊
No problem, I'm glad this video is still helping people after all this time.
Thxs bro
Thank you so much
No problem mate.
thank you so much!!
Thank u very much for the. I’d fixed my bike thank u
Dustin Goff no problem
I have a problem my kicked start doesn't close it has the spring broken inside
It goes back up but doesn't close
Jus broke a socket trying take the bolt off kickstart😭🫠
it did help tho
Do you need a new gasket after this? Thanks
Yes mate.
Hi I have a 2000 Kawasaki KX100 and I was wondering if you knew what could cause my kick start to skip the first knotch when I kick it if I kick it slow it does grab though is this normal or do I need to replace something ??
Mathew LaBarge probably a snapped tooth on the kick start gear. Hard to say without stripping it down. best of luck chap
Thanks dude I think it is the kick start shaft I forgot when me and my dad rebuilt the whole engine there was a little chip missing out of it thanks for your input I subscribed nice video 😎
I see this Yamaha blaster on Craigslist for $750 and it says all it needs it a kickstart spring idek if i should trust it because if i buy the bike and not start it before hand i couldn’t be in trouble
YSG NIKO the spring will not matter you can still start it but the Kickstarter will have to be pulled back by hand everytime you kick it. It will just make it a pain in the ass to start
Ya boy Aaron ok thx
Like.
How much oil and what kind is preferred for a 02 blaster after kickstart is done
Did u have to take the brake off
I just pulled the pin on my brake to get the cover off on the clutch.
pavan sagar harsolaw nagur
OBVIOUSLY
haha, I'm no good being on camera mate, never mind filming myself :)
Uhh..so..yeah...haha....repeat 50 times!
You loved it :) 😂
Obviously...
haha, I'm no good being on camera mate, never mind filming myself :)
Why my kick start so easy to kick
Probably broken
Please get a tri pod.
Sorry mate this was a long time ago and recorded on an iPhone, long before CZcams was what it is now. Hope this video helped you. Thanks
thats a disgrace to a blaster wtf did u do to it
That's how I bought it :). Probably had too many previous owners
Pretty sure my problem is the springs worn out cuz it’s supper easy to put my spring on an usually it’s not the easiest but great video describes it perfectly an shows it