DK, lot of great information in this video sir !!! Hub Centric is obvious the best way to go after seeing your video. I’m a new subscriber, watching your videos and will get with you when I’m ready for some wheels.
DK you are 💯.awesome info ironic I talked to you in the morning about a set of 24 smoothei for my 1982 chevy dually and here's this video explaining how it work. I will be reaching out for my 24 smoothei Thanks💯🙏
Great video I learned a lot. I just picked up a 1996 Extended Cab that I am going to do a Dually swap on and will need some wheels for. Keep up the great work.
very informative DK, I didnt even know the direct fitment was an option....reason being, I've got a bagged 93 GMC sitting on stock wheels. I've been wanting the semi wheels, but was waiting until i purchased wider rear fenders so they would tuck. Hopefully ill be ordering from you soon. appreciate the information Gracias, Brutha!
I purchased a set of 22.5 Alcoa for my Ram 5500 with tires, adapters, and covers. Could not be any happier with the finished product and level of service I received from DK. Ill be sending those pics soon!!
Very informative video. Do you have a Facebook link ? I love how you explained everything. I’m doing a dually conversion to a truck my grandfather gave me and I want to make sure I’m doing everything correctly. I greatly appreciate any help and guidance !
Thank you for the detailed information. I was wondering if the semi rims come in black? I’m working on a future truck build. I tried to look for a website is see what a set of dually rims are. Thanks
I am going to purchase an F450 4X4 soon. As part of that I would like to get 22 inch steel wheels to handle 7,500 lbs in the bed of the truck. They would need to be hub centric like you stated. I would also like the wheels to be rotatable from front to outside rear. Outside rear to inside rear. Inside rear to front. I am I asking too much? Is that even possible. With steel wheels I can just give them a quick paint job when I rotate the tires and wheels. Thanks for your opinion.
Thank you for the info Sir. I've try to get info but hard to get people to tell one the truth. Can you tell me what a set for an 87 dually tucked 22" go for? Thank you for the information.
Dually king, I am new to the Dually world and I am looking for some guidance. I'm looking at some 22x8.5 wheels but I am reading alot of 22×12. I don't want it too wide, specially my front wheels but I also don't want them too thin where they don't look good. What should I do?
So what would I need to do to run 22’s on my dually sorry I’m new to them. I know I’m going to get some hub centric wheels but not sure if I have to install longer studs also? I may just have to get all my stuff from y’all. I live down in KY.
Got a 8 lug suburban want to put dually fenders on it what would I have to do to get the Diesel wheels on it would I have to change all the suspension are what
Hey I'm interested in doing some super singles on my gmc 2500 ,want to know if you carry them 22.5x14 I want them milled down to 22inch and see if if you could mill a design on the face ,and price please ????
Thanks for info. I have a 2016 ram 3500 dually mega cab. I have a set 22.5 Arcola with 255/70r22.5 tires. I'm going to need a set adapter plates from you.
You need a list of options and prices there are so many different ways to go and us people out here that are interested cant find info on all of the options
Ok I'm wanting a price on alcoa milled to 22 inch.The rear is gonna be super single.ALSO THIS TRUCK IS F-250 YES 3/4 TON NOT DUALLY AXEL! Now I need price on those 4 wheels 2- normal 2- super single. I'm gonna put an old school western hauler bed on truck please help.thanks
Appreciate the video but the pressure between the wheel and hub handles the sheer force. If you want a true hubcentric wheel id want to see a tigher fit, and see the squareness. Your philosophy makes sense for short studs and threads available.
Now that was a very informative video DK. I've been watching your videos for awhile now. I have a '97 Silverado dually. How do I get pricing for your setups. Website? Thanks brother, keep doing what you do. It's always a pleasure to watch your videos.
What's benefit of direct vs adapter? Direct.. Fits tighter into the fender, less weight?? You mention strength.. A stock 350 rim is what.. 1/2" thick? People gotta remember that these alcoa's are on semi trucks that haul way more weight than what a pickup would.
By milling down the face of those rims you have effectively reduced their load capacity. You have also created a dangerous situation because that inner wheel hub seat is now taking 100% of the force that's normally spread between 2 rims. This would not be DOT approved and could result in massive fines because now the stamping on the rims is not in compliance and the rim seat method is not dot approved. 100% of this situation is dangerous and Illegal. It could result in fines, vehicles being impounded and even causing death or serious injury when that inner wheel fails due to the stress situation you created.
Stay in your lane. you CLEARLY don't know what you're talking about. This is my profession. You are a tire salesman. I have a degree in Machining, CAD/CAM Design & Engineering. Until you have those Credentials, Don't TRY to school me & or tell me how to do my job!
DK, lot of great information in this video sir !!! Hub Centric is obvious the best way to go after seeing your video. I’m a new subscriber, watching your videos and will get with you when I’m ready for some wheels.
I love it! Knowledge is power! Thank you I’ve got a big build coming up soon and this helps me sleep better at night!
DK you are 💯.awesome info ironic I talked to you in the morning about a set of 24 smoothei for my 1982 chevy dually and here's this video explaining how it work. I will be reaching out for my 24 smoothei
Thanks💯🙏
I just picked up my first dually. This is all new to me and in my opinion. This is brilliant
Great video I learned a lot. I just picked up a 1996 Extended Cab that I am going to do a Dually swap on and will need some wheels for. Keep up the great work.
Clean as hell, I get a dually, you the man… “small shop that packs a big punch” I run my stuff the same …. Thanks man
Thanx for that info. "Dk" and the wheels look killa bro. Fo-sho !!!
thanks for the heads up..
i'm comptemplating going that way with my dually.. i Will check you out when i'm ready.
Loved your video man. Mad props to you from Jersey
Thank you for all the great content.
very informative DK, I didnt even know the direct fitment was an option....reason being, I've got a bagged 93 GMC sitting on stock wheels. I've been wanting the semi wheels, but was waiting until i purchased wider rear fenders so they would tuck. Hopefully ill be ordering from you soon. appreciate the information
Gracias, Brutha!
Great video DK,you need to post more. Ready to see that obs finished up and on the road...
Great information... keep up the great work
Please talk about direct bolt super singles. Thanks for all the knowledge
Great informational video my brotha
I purchased a set of 22.5 Alcoa for my Ram 5500 with tires, adapters, and covers. Could not be any happier with the finished product and level of service I received from DK. Ill be sending those pics soon!!
Thanks much appreciated!! An definitely appreciate the business!!
Wow! Those wheels are beautiful.
Thanks for the info. Those wheels look great
just got your channel very informative thx
Good info bro. Proud of you
That’s good information DK
Great video and thanks for sharing
DK it’s JT u making me want direct bolt on now can’t wait to see my wheels though
Very informative video. Do you have a Facebook link ? I love how you explained everything. I’m doing a dually conversion to a truck my grandfather gave me and I want to make sure I’m doing everything correctly. I greatly appreciate any help and guidance !
Thanks. Very good information
🔥 need new look for my f350 lariat 2005 ✌ nice work
I have a 2016 sr5 tundra with a long be and I want to give it a dually vibe.
Thank you for the detailed information. I was wondering if the semi rims come in black? I’m working on a future truck build. I tried to look for a website is see what a set of dually rims are. Thanks
Super content! Thanks.
I am going to purchase an F450 4X4 soon. As part of that I would like to get 22 inch steel wheels to handle 7,500 lbs in the bed of the truck. They would need to be hub centric like you stated. I would also like the wheels to be rotatable from front to outside rear. Outside rear to inside rear. Inside rear to front.
I am I asking too much? Is that even possible. With steel wheels I can just give them a quick paint job when I rotate the tires and wheels.
Thanks for your opinion.
Love it DK
Nice work
Question, I have always wanted that dually look, but I don't want duals. Can I put front wheels on the back of my F250. Thanks!
The right way. Nuff said!
Thank you for the info Sir. I've try to get info but hard to get people to tell one the truth. Can you tell me what a set for an 87 dually tucked 22" go for?
Thank you for the information.
I want to run direct bolt on for my F350. I tow trailer daily. Need to talk.....what I should do to get large wheels and not compromise safety
Dually king, I am new to the Dually world and I am looking for some guidance. I'm looking at some 22x8.5 wheels but I am reading alot of 22×12. I don't want it too wide, specially my front wheels but I also don't want them too thin where they don't look good. What should I do?
Going 24in 8x6.25 direct bolt on here. Definitely need to be hub centric so I can move effectively
So what would I need to do to run 22’s on my dually sorry I’m new to them. I know I’m going to get some hub centric wheels but not sure if I have to install longer studs also? I may just have to get all my stuff from y’all. I live down in KY.
Got a 8 lug suburban want to put dually fenders on it what would I have to do to get the Diesel wheels on it would I have to change all the suspension are what
Hey I'm interested in doing some super singles on my gmc 2500 ,want to know if you carry them 22.5x14 I want them milled down to 22inch and see if if you could mill a design on the face ,and price please ????
How you due for alignment de billet caps for drilling holes for installing
Thanks for info. I have a 2016 ram 3500 dually mega cab. I have a set 22.5 Arcola with 255/70r22.5 tires. I'm going to need a set adapter plates from you.
How much are your adapters for a 2007 dodge 3500. 8 to 10 bolt. I'm just wanting to run semi rims. Thank you
Great video.....
Do you have any sales on wheels and tire 24
Good Job Boss.
You need a list of options and prices there are so many different ways to go and us people out here that are interested cant find info on all of the options
Ok I'm wanting a price on alcoa milled to 22 inch.The rear is gonna be super single.ALSO THIS TRUCK IS F-250 YES 3/4 TON NOT DUALLY AXEL!
Now I need price on those 4 wheels 2- normal 2- super single.
I'm gonna put an old school western hauler bed on truck please help.thanks
Appreciate the video but the pressure between the wheel and hub handles the sheer force. If you want a true hubcentric wheel id want to see a tigher fit, and see the squareness. Your philosophy makes sense for short studs and threads available.
22 Direct bolt price? Basic wheels. Building my 96 CC on a budget but not sacrificing wheel integrity
Where are you located my man?
U say umm 🧐 a lot 🤣🤣🤣 love ya bro
Ummmm...... I dont think so lol 😂🤣
got a 2001 how much for 22s
I really appreciate you taking the time to share this great information. Where you located?
Fort Wayne Indiana
Now that was a very informative video DK. I've been watching your videos for awhile now. I have a '97 Silverado dually. How do I get pricing for your setups. Website? Thanks brother, keep doing what you do. It's always a pleasure to watch your videos.
Appreciate it budd!! Just call or text the shop number
@@duallykingindustries1297 where ar you locate information
CAN I GET THESE RIMS FROM YOU
DK how can I get in contact with you? I need you to fix mine for me thanks
there is no contact information on your CZcams page. how can we contact you?
Good info do company like American force and specialty forged make wheels that you approve?
i dont sell either brand so i dont know sorry
What's benefit of direct vs adapter?
Direct.. Fits tighter into the fender, less weight??
You mention strength.. A stock 350 rim is what.. 1/2" thick? People gotta remember that these alcoa's are on semi trucks that haul way more weight than what a pickup would.
Nice
Super nice
Wheel. Prices
Thanks...
What will a set of gloss black and machined custom cut 24 inch wheels cost me
just did a set! check our facebook page
Hello Sr. I need my 22.5 cut and I’m in Colorado can’t find nobody to do it. Any ideas or do you know of anybody? Thank you for your time and help
dont know anyone in that state but you can always ship them to me
DK, are your adapters Hub Centric? 2018 Ram 3500 Dually
yes
I see you do a lot of chevy. I have a 95 f350 that I would like to tuck 22s on. Any suggestion on the route to take?
We have a tuck setup that will work for that
@@duallykingindustries1297 Would Luv a price on that.
@@duallykingindustries1297
What's the price range on that setup?
Yo dk u got a website to see your wheels been trying to get in touch with you but i dont have social media
Facebook or Instagram or call the shop. It's all public
Anyone have a life hack to take off a stuck back dually rim 78 Chevy crew cab 3+3 manual.tyia
a 4x4 block of wood an a sledge hammer
So are all the wheels hub centric& do you rotate the rims as well after so many miles?
yes they are an no you cant rotate the wheels after
@@duallykingindustries1297 after how many miles& what psi you runnin?
What do you do if you have an older dodge that uses coined wheels?
keep them lug centric. plus they have 5/8'' studs anyway. so there beefy
@@duallykingindustries1297 you know what's it usually cost to turn down a set of 22.5 I got access to tons of them?
One day I’ll have a set of 22.5s on my 85 c30
💪🏾💪🏾💪🏾😎
Know what I mean yes brother you know what you mean @ get down cool bro keep real you people
If I want to tow up to 30k lbs, can I still do that with your wheels?
Nope
Yes you can. Your wheels will just be made differently than what's in this video
@@duallykingindustries1297 Thanks. How can I get in touch with you.
I'm trying to place an order
call the shop
you ship to South Africa ?
Everywhere
@@duallykingindustries1297 well sir i will be in touch as we looking to crack open the dually game in Africa
How can I order these?
Just call the shop when you ready to order
Shine on DK
That’s how you shine up your Rims
New subscriber I love u content help me a lot….🙏🙏🙏🙏
What’s your number to order some rims
812 two1two nine07six is the shop. M-F 8am-5pm
Dk can u call me! Trying to buy rims n adapters for my 1993 c3500 display.... it’s Ronnie!
im buy 78 dully
Where your location
Fort Wayne Indiana
How do I find info
Where you located and what’s ur IG?
Fort Wayne Indiana.
IG @dk.customduallywheels
I say u know what I’m saying a lot 🤣🤣🤣🤣
By milling down the face of those rims you have effectively reduced their load capacity. You have also created a dangerous situation because that inner wheel hub seat is now taking 100% of the force that's normally spread between 2 rims. This would not be DOT approved and could result in massive fines because now the stamping on the rims is not in compliance and the rim seat method is not dot approved. 100% of this situation is dangerous and Illegal. It could result in fines, vehicles being impounded and even causing death or serious injury when that inner wheel fails due to the stress situation you created.
Stay in your lane. you CLEARLY don't know what you're talking about. This is my profession. You are a tire salesman. I have a degree in Machining, CAD/CAM Design & Engineering. Until you have those Credentials, Don't TRY to school me & or tell me how to do my job!