Reassembling the Range Rover Classic body Pt.2
Vložit
- čas přidán 27. 08. 2024
- Land rover rebuild and tdi swap.
If you want to support the channel, here are some affiliate links to the tools I use!
Milwaukee impact gun: amzn.to/3e7rNLR
Milwaukee batteries: amzn.to/3hXJte7
Plasma cutter: amzn.to/3ra6X3J
Plasma cutter tips: amzn.to/3hXAHg6
grinder: amzn.to/36tLw49
battery Grinder: amzn.to/3hVP4l3
C clamp: amzn.to/3AUvmP6
Coveralls: amzn.to/3wwGQ8b
Channel locks: amzn.to/3kkWgdt
socket set: amzn.to/3hX5bim
breaker bar: amzn.to/3hwo7oU
deep impact sockets: amzn.to/3r16BMR
short impact sockets: amzn.to/2UFLEL6
extensions: amzn.to/3htxTIt
This mans determination is staggering
haha ;)
Love watching the build . I bought my first LR 2 years ago and I have three now! 2 are daily drivers, they have been work but fun at the same time! Keep the videos going!👍🇨🇦
Glad to hear it! Will do ;)
Nice work again Ludi, taking shape now, good luck with the motor too! 👍🏻😊
thanks, I'm going to need it haha
Nice work, great channel, love how this is a “no budget, all labor” build. It retains some of the interesting patina while having taken care of the rust and sorting everything. The previous owners workmanship makes me think I used to own that thing.
Ahah 😂 yeah it's defintely a budget build as I am still young and poor, but gotta start somewhere right! 😉
jeez ludi thats a ton of wiring right there
It looks like a mess but it all has it's place! ;)
Jezzzz, just watching your videos and in the previous to this one I told you to make sticker or T-shirt with the RRC and the chicken, and you already have one with the RRC!! lol
Yeah haha 😂
Happy new year! I see you’ve done quite a bit on the RR. Keep up the good progress:) Looking forward to see it paired with the TDi :)
Happy new year!
Machine mon gars !! Lâches pas 😎😎
Merci merci! ;)
Bro c'est tellement sickkkkkkkkkk haha !!!! crissement hâte d'aller prendre une ride avec toi !
Haha thanks, bien hate de t'amener ;)
Depending on what year you Range Rover is from there is a subwoofer and an amplifier in the right corner so maybe thats what the plug ist for.
Yeah i've seen that before but this one didn't come with one :)
Nice job! And good luck with that arness... Look like a little bit “messy” 😅 Sure you will do it right! And as advice, when spraying oil that mist can be really hazardous for your lungs. Try to use a mask!! 💪🏻💪🏻
Cheers!
defininetly should have worn a mask! Wanted to get it done quick but still not worth it..
I wish I had the facilities to do this build as I think the classic Range Rover is really just a big boys Mechano set. Your video’s could do with being a little longer say in the 20 minute range, hope all goes well with the motor installation, are you using a bigger turbo or just up grading the ecu. Is your chicken a good apprentice 😂
It's exactly that! just more expensive and frustrating haha. I'm probably going to stick with the stock turbo for now, and of course the best apprentice is the chicken apprentice ;)
Good start with the wiring loom mate. They always look like a nest of vipers but they do have a logic. Even Lucas ones.
I hope this workshop manual helps as it is issued by LR North America and covers the 3.9 1990 year. Wiring diagrams are at the rear of a lot of pages. The relative year is clearly marked on the top of each page.
Good luck!
www.landroverresource.com/docs/rangerover/Range_Rover_Manual_1992.pdf
Thanks thats gonna come in handy haha
Hey ludi loving your channel, any chance of one of your stickers
Michael Fletcher
28 oaktree drive
Newport
Gwent
Np10 9JN
United Kingdom
I'll look into posting some :)
I wouldn't mind a drive also but it's not going to happen! Lol, how much hp does the engine have?
Should be around 150hp and 230tq after the tune and nozzles!
@@ludwigseeley6359 good amount of power! I think a 300tdi is only about 111as far as I can remember? I was tempted to ecrire francais mais je pense Parle asset null!!! Lol:)
@@ludwigseeley6359 missed that part. is that 3.9 v8? the one with injectors?
@@jamescunliffe9872 hahah ;)
@@ljuberzy yep!