Krenov style wall hanging cabinet
Vložit
- čas přidán 24. 08. 2024
- In this video I make a krenov style wall hanging cabinet of drawers. This project came about because I wanted to take on a long term project using materials I already had in my shop, and to make something that would store fasteners and hardware. The case, doors, partitions, and back frame are made from African Mahogany, the pulls are African Blackwood, The drawer fronts are Ebinara, and the back panel is Redwood. The case houses 30 dovetailed drawers. Overall this project took me 6 months working on weekends and nights. The most difficult part of the project was dovetailing the drawers. It was very repetitive haha. Its a long video so if you made it to the end, your rock!
Thanks for watching!
#krenov #cabinet #woodworking
Excellent job!!!
Thanks!!!
Beautiful job, I love the large dovetail on the drawers.
Amazing !
A REALLY nice utilitarian piece. I like seeing those small hand tools put to good use.
Loved this video, please keep posting frank!
Thank you!
I’m planning to attempt make a round bottom plane to try to make my first coopered door. I’ve got David Fincks book and it is awesome but it just leaves something to be desired when it comes to the round bottom.
Would it be possible for you to do a video showing how to make one? I can’t find anything detailed on CZcams of how to do it.
Nothing gives away where you live quite like Malort, glad to see another Chicago person
Great job.
Doors looked a little tricky! Turned outNice in the end 👍🏻👍🏻
Awesome piece of furniture hats off !!!
This is incredible. Well done, Frank. Lee of is a hero for me. This gel like I was watching A Cabinetmaker’s Notebook. It turned out beautifully.
Great piece, you’re attention to detail is impressive. It’s criminal that you only have ~500 subs.
Thank you! By the end of the build I was ready for it to be over haha
What a great video. Thank you.
shocked but also stoked you will be using for this for hardware. arguably the nicest shop cabinet ever made. nice work, so rad.
Thanks Joel! Dont worry, I wont fill it up with generic drywall screws, this guy is getting some of those high end GRK fasteners haha
Standards always start in the workshop.
Wow, what a beautiful piece! And it's a joy to watch such a skilled furniture maker. Thank you!
Thanks for watching! I appreciate your comment, take care
Malort: you must be a Chicagoan :) Beautiful job!
Hahaha you would be correct! Thanks!
Thank you very much for this insights into the furniture making of Krenov. This is what I was looking for since I have read the books. Just ordered the last one missing "Leave Fingerprints" :-). Your video gives me the necessary confidence to include one of those fundamental techniques into my next piece, a book cabinet!
Youre welcome! Im glad youre going to try something like this. Good luck with your book cabinet!
Hi Frank, thank you for posting an excellent video. I plan to make a small Krenov cabinet and this was so useful. Best wishes, Mark
Nice!
I really like your wee dovetail angle tool. Also, the way you sneak up on a line with your chisel is savage. Very nice!
Thank you! That lil dovetail angle tool is the 1/4" marking knife from Hock tools. A fishtail chisel is on the list but itll do until I get one. Works well enough, heres a link to it www.hocktools.com/products/knives.html
@@FrankBowlesFurniture Nice! Thanks for the link. Did you do classes at the Krenov school?
@@uncannyvalleywoods7248 Youre welcome! I didnt go to the Krenov School, I went to Inside Passage in Vancouver BC for a couple months. It was a great experience and I learned a ton
Awesome build,thanks for sharing it. Really enjoy your channel and your work.
Thanks Josh!
absolutely stunning piece ! Superb craftsmanship. Love your channel
Thanks Pierre!
Hi. Just discovered your channel - good work! Loved those planes you made in the other vids.
Regards, from New Zealand
Extraordinary workmanship and beautiful design. Just found and subscribed. Well executed piece and very good camera work as well. A joy to watch.
Thank you!
Fine, fine work. Like being back at IP watching this. Beautiful grain graphics on the drawer fronts. What, no schwong on all those dovetails? ;) That amount of drawers on any piece is an exercise in patience and skill. Well done, it's a lovely piece.
Thank you JR! I thought about putting in some schwong but then I was like yeahhh no theres too many haha. It really was an exercise in patience, halfway through dovetailing I hit a wall and was reconsidering my life choices lol. Thanks for watching!
@@FrankBowlesFurniture Yeah, I know those "life choices" thoughts - always near the end of the project when it needs a final push to get it done! Keep the videos coming - the camera work and voice-over are excellent.
@@jr3002 Exactly! And usually that’s when I want to cut corners haha. I’ve got a new video in the works but I’m moving shops from chicago to Knoxville so it’ll be a while till the next one. Thanks again for your comments! Take care!
What does burnishing w the shavings do? Never tried tht b4.
It polishes the surface, smoothing down fibers. Almost like a very high grit sand paper. You wanna burnish with shavings of the same wood species you’re using it on
Nice project Frank!
Was wondering where you got that little hand drill you used at 7:35
Cheers!
Glenn
Thanks Glenn! It’s called a pin vice and I got it from McMaster-carr. They’re a great resource.
Pin Vises
www.mcmaster.com/8455A31
@@FrankBowlesFurniture awesome. Thank you. Congratulations on the successful build!
Just AWESOME that you let us all know your sexual practices. Literally no other woodworker on CZcams does that. Not one. I so want to know, though, and they just don't don't do it. I'm not solely interested in the project, I want to know about their sexual habits. I only wish you could be more explicit about what you do. "Gay" doesn't really spell it out. Thank you so much for making that a part of your woodworking. It's so important. Keep up the good work!!!
Lol found the Christian
Not just your average run of the mill Christian either. Evidently a rolling stone self righteous Christian. Maybe he should watch Hew and Awe? Pretty sure he likes to make viewers aware he ain’t no gay lol
Idiot, stfu. Your poor mother. She should have aborted you.