How to change your oil (10 minutes guide)

Sdílet
Vložit
  • čas přidán 12. 07. 2024
  • Engine oil change & oil filter replacement complete guide. Honda Civic/CR-V 2.2 i-dtec 2010.
    This video does not constitute or replace a real specialized technical manual, and was only made ​​for convenience and educational purposes. "TutoBuild Eng" makes no warranties of any kind and accepts no liability. "TutoBuild Eng" cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk.
  • Auta a dopravní prostředky

Komentáře • 36

  • @henrysteeze5754
    @henrysteeze5754 Před 3 lety +5

    10 minute guide, dude had the whole day turn to night on him

  • @no-shirk
    @no-shirk Před 2 lety

    Great video and a big THANKS!! exactly what I was looking for. Covers specifications of each tool required for the job 👍

  • @MrCharismatix
    @MrCharismatix Před 8 lety +1

    Clear instructions
    Thank you

  • @patrickmurphy7462
    @patrickmurphy7462 Před 4 lety +3

    Thx for sharing.
    Above will work for EU Honda Accord 2.2D also (VIII), same oil and filter arrangement, synthetic 0W-30 oil, and 5.5L for change.

  • @alastairstirling8121
    @alastairstirling8121 Před 7 lety +6

    5w 30 works just fine.. It's what I use along with what my local Honda dealer uses.. As long as it's C3 fully synthetic spec it will be ok..

    • @davc73
      @davc73 Před 6 lety +2

      Yes 5w30 would be ok but It should be C2 oil mate, not C3.

  • @kevinw1090
    @kevinw1090 Před 2 lety

    It's interesting to see cars in many markets outside of the US have the oil filter on the top.

  • @alesjura7846
    @alesjura7846 Před rokem

    Thank you, but can you add torque specs for filter and drain plug.

  • @truckn
    @truckn Před 11 měsíci

    *I think it's also a good idea to run the enging for a minut after putting in new oil and the checking the level a second time, check for leaks and if none your hired.*

  • @robertsingleton1893
    @robertsingleton1893 Před 3 lety +1

    You should have mentioned that the engine and so the oil should be warm but not hot before draining, This will thin the oil and so it will flow better.

  • @NextLevelAutoDiagnostics
    @NextLevelAutoDiagnostics Před 7 lety +4

    What year CR-V is this? I've never seen one with a cartridge style one.

    • @pallikorva11
      @pallikorva11 Před 3 lety +1

      2010-2012

    • @NextLevelAutoDiagnostics
      @NextLevelAutoDiagnostics Před 3 lety +1

      @@pallikorva11 Interesting. I didn't know the UK version was so different.

    • @pallikorva11
      @pallikorva11 Před 3 lety +1

      @@NextLevelAutoDiagnostics Yep. This is the 3rd gen EU facelift with newer diesel engine 2.2 i-Dtec (pre-facelift 07-09 2.2 i-Cdti). I have one just like in the video (AT Exe Adv)

    • @NextLevelAutoDiagnostics
      @NextLevelAutoDiagnostics Před 3 lety +1

      @@pallikorva11 thank you

  • @BisanKoirala
    @BisanKoirala Před 5 lety

    Do power steering fluid next

  • @andrewmosqueda
    @andrewmosqueda Před 6 měsíci

    Why does my manual recommend a Castrol brand?

  • @matejbarta7604
    @matejbarta7604 Před 8 lety +1

    natáček další videja

  • @adrianmccann6428
    @adrianmccann6428 Před 2 lety +1

    Good video, but there is no way you can change the oil in the car in ten minutes.

  • @meme-ml6fc
    @meme-ml6fc Před rokem

    NO mention of torque settings for plug or filter.

  • @thevibes67
    @thevibes67 Před 4 lety +3

    Wow got very dark in 10 mins

  • @TonyCiobanu
    @TonyCiobanu Před 4 lety +1

    Did he just mixed Shell with Elf?

  • @ronangsr
    @ronangsr Před 7 lety +2

    wrong oil. 0w30 fully syntethic honda oil should only be used

  • @gr2262
    @gr2262 Před 5 lety

    Its a euro 2.2L engine not the U.S model. You should change title to euro crv 2.2L oil change. Our filters are standard screw on here in the U.S and are located on the bottom

    • @KW-qq7nu
      @KW-qq7nu Před 11 měsíci

      It's a oil change for a 2.2 i-dtec 2010. Are the 2.2 i-dtec 2010s different in the US?

  • @georgedbuntsr6581
    @georgedbuntsr6581 Před 4 lety +3

    Get that old, dirty oil filter out of the way first! Then install new o rings. Don't work around that old, dirty oil !

  • @hannahh2941
    @hannahh2941 Před 7 lety

    hi i have better one than this car jack ,if you intereted in electric jack ,please reply me .

  • @thunderdan85008
    @thunderdan85008 Před 4 lety +2

    You should change the name of the video. This is a European vehicle.

    • @Qbhoy79
      @Qbhoy79 Před 3 lety +2

      It’s just that it’s a diesel. Not a petrol.

    • @WyreForestBiker
      @WyreForestBiker Před 2 lety +3

      Why ? America is not the center of the world ... you should assume video's are not
      centered around you own location .

    • @KW-qq7nu
      @KW-qq7nu Před 11 měsíci

      @@WyreForestBiker Well said. The title couldn't be clearer too.

  • @obrianthinline8514
    @obrianthinline8514 Před 3 lety +2

    Useless video. Doesn’t explain exactly where the jack points are. Nothing about the size of the drain plug. Yet they give useless information about counting the sides and measuring the diameter of oil filter. I stopped at the 2:00 min mark.

    • @timtim8468
      @timtim8468 Před 2 lety

      Well, the point where he lifts the car looks already bent, but it works. So we know it can be done that way. I would not do it that way.