How to Remove/Replace the Antenna/Aerial base mount on a 2007 Hyundai Getz (AKA Click TB)

How to replace the Antenna Base mount on a 2007 Hyundai Getz. The Hyundai part number of the Mount is 96220-1C010. I bought the Mount from eBay.
Please give a thumbs up if you found this useful!

[@bertrandemeyer3111]

Thanks so much for the great video. My Getz aerial mount had become detached and my dealership told me they'd need to take out the ceiling lining altogether and claimed this would cost them over $500 "to investigate". Your video allowed me to just pull the lining down a bit and reattach the nut to the bolt - costing me nothing. You're awesome - thank you so much!

[@DjClarky78]

That's fantastic.
It's comments like this that make it worthwhile. Glad it helped you and saved you cash. 👍

[@changeablefate435]

Snapped my antenna off some time ago when I went through a car wash (stupid me). I thought it was going to be such a huge job to fix it (I'm not real good with car stuff). So grateful for this video - clear, simple and concise. Cheers!

[@DjClarky78]

Thanks. Glad it helped you and saved you some money.

[@helendownie3594]

Thank you ... I was quoted $100 for installing my Getz antenna from Cheap Auto ....??????? after watching your video I installed it myself within an hour ..Im a 70 year old woman and sick of being ripped off ...Thank you again for posting this video saved me heaps

[@DjClarky78]

That's great - good for you, and thanks for the kind message.

[@rebekahsusanne2557]

this is awesome! I was so confused trying to work out how to skew the new one in. THANK YOU!

[@chhiwatpang]

Thanks mate it saved my money and time. I took my car to local garage n the mechanic told me too leave the car for whole day so that he could remove entire upwholstry to find the bold and fix the antena base. Next I returned home and found ur video. Cheers

[@DjClarky78]

Thanks - glad it helped and saved you some cash.

[@TheDeadpedal]

Thaaaank you so much!!! I accidentally broke mine aswell today and started wondering how much the repair is going to cost. But now I know how to do it myself.

[@ianwhitehead7191]

Clear concise instructions without any flannel - many thanks .

[@DjClarky78]

Thanks Ian - glad you found it helpful.

[@MrMrlosteruk]

Excellent work, clear, accurate, helpful. Recommended 😊

[@DjClarky78]

+Simon Inniss Thanks for the kind words. Glad it helped.

[@riyaroy964]

Simon Inniss

[@pix046]

It was.

[@MusicMovesMe78]

Thank you for your help from Atlanta, Georgia, USA 🙏

[@luizamaiden1863]

thanks a lot. Thanks to you I've just finished changing my Toyota Yaris aerial base and will finally be able to listen to a radio other than Smooth FM (only station I could get without an aerial), so happy:) :)

[@DjClarky78]

+Luiza Maiden Thanks for the feedback - glad it helped!

[@kierenjackson6421]

Excellent video, very clearly explained. Made my job of replacing the antenna base a piece of cake. Thanks again mate.

[@DjClarky78]

kieren jackson - thanks. Glad it helped.

[@jamesfurey]

Followed your instructions and easily replaced my old base mount with a new one. Thanks heaps!

[@DjClarky78]

Thanks James - glad it helped you!

[@MrNgp99]

Thank you for the great video - and so expertly made too. This is just the sort of thing the dealers would charge big bucks for. I thought I would have to drop the entire headlining!

[@DjClarky78]

Thanks. Glad it helped you out. 👍

[@zdenekstepanek6952]

Thanks for instruction from Czech Rep. Great!

[@markbrown8039]

Fantastic little video,
Clear, concise, all that someone needs to do the job themselves, would encourage anyone with a broken antenna to undertake this fix, the knock off short little carbon fibre aerials on eBay work great!

[@DjClarky78]

Thanks for the kind words - glad it helped!

[@lauwe54]

worked without any problem nice new chrome atenna on roof thanks again dj

[@Zekriax]

Thanks for the video bro! Clear and to the point ! Huge difference when I play the radio on
Thanks again :)

[@DjClarky78]

Thanks Ezio - glad it helped.

[@elkarlos1]

Fantastic, thanks for this DJ. we were told by our mechanics & auto sparky that this job was bigger than ben hur, they had never done one before. Thanks for this, we'll change it ourselves real easy.

[@DjClarky78]

elkarlos - thanks. Comments like that make it worthwhile making vids!

[@user-ki7xq5ru1h]

elkarlos1 αρδχδδτυτρ

[@MusicMovesMe78]

Thank you for your help from Atlanta, Georgia, USA

[@DjClarky78]

Thanks. Glad it helped!

[@mustangdude11]

Thanks mate, excellent video.

[@DjClarky78]

mustangdude11 Thanks.

[@VRD00M]

Perfection, good stuff

[@polly5819]

I have a getz plate 08 and my antenna snapped like you are showing in your footage! Been wondering how to get it off but thanks to you you have explained how easy it is. Just need a 10ml ratchet lol. Great video. Dee from County Durham

[@DjClarky78]

Thanks Dee.
Let me know how you get on.
Good luck.

[@videodharma]

Ha! I broke my aerial today and Google brought me here. Cheers for the helpful video. I'm now off to Ebay. :)

[@DjClarky78]

Thanks for the positive feedback - good luck with fixing yours!

[@dodgygeezah4707]

Useful, clearly explained. Thanks mate 😊

[@DjClarky78]

Dodgy Geezah - Thanks. Glad it helped.

[@gverdi96]

Thanks! Clear explanation and very useful. Good job!

[@DjClarky78]

Thanks - Glad it helped!

[@aliceinwonderland087]

Really helpful. Easy to understand. I wouldn't have attempted it otherwise.

[@DjClarky78]

Thanks - glad it helped!

[@jcnnolim]

Many thanks Indeed. I couldn't figure it out without your video. Thanks again

[@DjClarky78]

Thanks. Glad it helped you.

[@marklaunt3747]

Well done, very helpful.

[@agh2815]

Thanks for this video. You've given me the confidence to tackle it. I didn't think I would be able to

[@DjClarky78]

That's great - glad it helped you. Did you get it fixed, or are you about to attempt?

[@agh2815]

After seeing your video I'm going to attempt it. It's on a 2010 Hyundai i10 but the ariel looks the same. I've yet to get the ariel but I've now had a look at the lining and I can see that it comes away just like in your video so now I know I can attempt it. Thanks again.

[@LegendaryUrbanHackerZ]

Very clear instructions! Thanks

[@DjClarky78]

Glad it helped!

[@toosavvy3504]

GR8 M8! 😊
Bought a Getz yesterday = no aerial.
.... You are a star 🥂
tooSavvy

[@DjClarky78]

Nice, hope it helps you.

[@kassgarofalo1879]

thank you! saved me some money watching this

[@DjClarky78]

Thanks - Glad it helped.

[@Menymu]

Thanks! same happened to me :) helped me

[@portosssify]

Man, thanks a lot!!!
I have the same car, awesome value for the money spent on it!!

[@DjClarky78]

Thanks - Glad it helped you!

[@The123456789liam]

Thank you for the informative video, it was very helpful.

[@DjClarky78]

Thanks Liam - Glad it helped.

[@Thiasgaming]

Google brought me here!
Just snapped my antenna
Right off at the same spot. So thanks for the video :) got a getz 2008 Cross :)

[@Oz.Ranger]

Thanks for this! My girlfriends antenna was badly corroded as well and I snapped it without trying.

[@DjClarky78]

Thanks.
Glad it helped you

[@dianaisitt6668]

Wow really well explained. Ariel snapped off and rather than using a drill bit and bolt extractor and risk slipping and scratching car I think Im going to change whole roof base mount. Hope this works on my old Kia Rio 2003. Wish me luck...going to use your video

[@DjClarky78]

Good luck - let us know how you get on.

[@TomDurnin]

Excellent video. Thanks for sharing your experience.

[@DjClarky78]

Thanks - Glad it helped.

[@user-oc6sx4by3z]

Excellent video. Nice and simple, to the point.

[@DjClarky78]

Thank you - glad you found it helpful.

[@may26850]

Thanks. Bendede Getz var anteni değiştirmek istemiştim, videoda hepsi güzel anlatılmış. Teşekkürler.

[@DjClarky78]

Rica ederim

[@miniaktk1983]

Thanks for instruction from Poland !

[@DjClarky78]

Thanks - Glad it helped!

[@ryanGevans]

Added a like. Nicely explained, good job :-).

[@DjClarky78]

Ryan Evans - Thanks Ryan
Glad it helped.

[@albertoalamoarmas8339]

thanks, nice video :)

[@michaeldodemaide6356]

Thanks for this, very helpful. You don't happen to have the part number for the Antenna, do you?

[@MrStevie57]

Very helpful.

[@tommig910]

Very helpful thanks!

[@DjClarky78]

Glad it helped!

[@marksheehan1256]

thank you so much i thought it was going to cost me an arm and a leg to get it replaced :)

[@DjClarky78]

Thanks.
Glad it helped you out. 👍

[@briangibson94]

You are an absolute star. Cheers mate.

[@DjClarky78]

Thanks - glad it helped you!

[@j1ppe]

Same problem here too, thank you so much!

[@DjClarky78]

Welcome. Thanks for the comment.

[@Deckzwabber]

Thank you so much! I'm having exactly this problem with my 2004 Getz

[@DjClarky78]

Thanks.
Hopefully you get it fixed.

[@Deckzwabber]

@@DjClarky78 I did! Thanks to your video, my old clapped out Getz now has a brand spanking new antenna.
And some Hammerite brushed on, where rust was forming under the old base.

[@DjClarky78]

@@Deckzwabber Well done! Glad you got it sorted.

[@rodbeale3523]

Very clear on how to. . . Process for manipulating components for access all good.

[@DjClarky78]

Thanks - glad it helped.

[@anthonylameul7209]

thank you mate

[@Suroyfamilia]

Very helpful indeed 👍 thanks

[@DjClarky78]

Thanks - glad it helped.

[@aditipropertiesmumbai2061]

Tnx for video.

[@satalkingtours5541]

good video! Thanks!

[@DjClarky78]

Thanks - Glad it helped.

[@niclangos]

Thanks great stuff..

[@celebraaraujo]

Wow. You are natural tutor.

[@DjClarky78]

Thanks - hope it helped you.

[@syd_jzx100]

How did it not occur to me to remove the head liner. Cheers mate appreciate the video.

[@DjClarky78]

Charisma - thanks - glad it helped.

[@mkth3pluggm485]

Great help I used your video to help me change mine but....... that must of been hard to film and use the tools

[@adoreslaurel]

I must do that Did not think head lining could drop down, thought it would be a glue job. My radio is lousy on AM reception, don't know if it is high resistance in aerial because of corrosion on threads, I cannot move it up or down also, pity they are not made of brass. greasing threads all round would be a good idea, even working it into the tilt pivot and periodically checking it for lubrication.

[@oldergeologist]

Thanks.This will save some money.

[@DjClarky78]

Thanks - glad it helped!

[@leonardcst2]

Very helpful... Thx

[@DjClarky78]

Welcome. Glad it helped you!

[@pbw1980]

useful video

[@DjClarky78]

Thanks

[@nevadabadger7925]

Man, I thought your antenna was messed up! Somebody moved your steering wheel too.
lol.😂

[@ravia7856]

Good video.
Thank you.

[@DjClarky78]

Thanks. Glad it helped you.

[@godisone1009]

Thanks brother 👍🏻😇

[@DjClarky78]

Thanks mate. Glad it helped.

[@sakirsukrukadoglu7244]

Thank you so much

[@DjClarky78]

Thanks

[@1999straker]

thanks for the demo we have the same problem .where did you get the replacement base unit ? is it main dealer or can you get a none hyunbdai part >>?? thanks

[@DjClarky78]

Hyundai part number is 96220-1C010 (in the description). I just copied and pasted it into eBay, and there are a few on here. Good luck.

[@lauwe54]

great thanks so much for your time now i have to change mine on daewoo matiz hope its the same and i dont have to reolace whole antenna cable to radio ?

[@DjClarky78]

+Max Rex Thanks - hope it goes well for you.

[@danielrodriguezperez8655]

Thank you a lot

[@DjClarky78]

Thanks - glad it helped.

[@nagadurgaraoroyal7039]

Super....tnx bro

[@DjClarky78]

Thanks. Glad it helped 👍

[@mohammedalzoubi8631]

Thanks

[@justinpatel75jp]

hi, do you have any advice for replacing the rear fog light, took getz for mot and thought i'd save a bit of cash and do the bulb replacement myself, removed the rear fog light cover from the bumper, no bulb or fog light socket present, just a hole!!

[@DjClarky78]

Sorry for the late reply. I'm guessing that the light is a dummy, or the socket has dropped out. What was it?

[@ryanc159]

Thanks!

[@DjClarky78]

Ryan C Thanks - Glad it helped!

[@Itz_Trixxy]

Hi
Can you please tell me where you found an ariel to fit the base for rhe getz as mine has snapped.
Cheers

[@DjClarky78]

Hi Trixy,
I bought mine from eBay.
The official Hyundai part number is in the video description below the video.good luck.

[@buicat6298]

Thank you

[@DjClarky78]

Welcome. Thanks. 👍

[@amycarden2827]

This may be a daft question, but would this work for a Citreon C1 (59 plate) too? I have damaged my aerial in a car wash and water is now leaking through into the interior light.

[@DjClarky78]

Amy Carden - i honestly have no idea. You could try undoing any visable screws, see what access it gives you? Can always put them back again. Good luck

[@juanbond7032]

Exelente! No caso una palabra en ingles!, pero se entendio gracias!!

[@DjClarky78]

Gracias- mi hermano habla espanol y ha traducido tu comunicacion. Estoy contento que el video te ha ayudado

[@darshs93]

Good work Buddy...is the procedure same for Hyundai eon car .I wanna replace the old antenna..reply

[@DjClarky78]

Hi Darshan - I don't know I'm afraid. Maybe try and see if you can get the roof lining down the same way.

[@olegp2131]

Thank you from Moscow, Russia.

[@DjClarky78]

You're welcome Comrade! Not been to Russia - on the to do list!

[@olegp2131]

Yes, in Russia go by Getz too and at them these damned this fuc..ing antennas break too :-)

[@hddbc5787]

thanks now I might be able to fix my moms car there's a huge rust spot all around that antenna base and she can't really afford to pay dealership prices

[@DjClarky78]

Thanks - glad it helped you. Have a look for a chemical rust converter/remover in the hardware store. I'm guessing you're in the US? I had a look on the Lowes website, and Loctite do a Rust Neutraliser and a rust dissolver for under $10

[@hddbc5787]

@@DjClarky78 I'm not in the us no I already bought all the things i need from biltema (norwegian hardware store) I'm probably just gonna end up reloving the antenna as the radio has never had reception around here and it's never really being used

[@DjClarky78]

@@hddbc5787 Fair enough (I saw you wrote "Mom", and just assumed you were in the US - my bad)
Let me know how you get on. What are you going to blank the hole with?

[@hddbc5787]

@@DjClarky78 I'm going to have to weld in a new piece of metal since it was completely rusted through going to the scrapyard tomorrow and then I'm going to try to make it look at least decent with body filler afterwards

[@JohnMichaelMurphy13]

So i followed your video instruction for a 2007 Kia Picanto, almost exactly the same, but after I Installed it and put all visors back I am having a few Issues with electrics. The central locking button will not work on the key and the rear fog lights will not switch on. Is it possible I blew some fuses during the installation because i did not disconnect the battery before hand ?

[@DjClarky78]

John Michael Murphy - sounds like it, although i don't think the aerial cable has anything to do with the car electrics. Did you remove anything else? I'd check the fuses. You know where the fuse box is?

[@JohnMichaelMurphy13]

DjClarky78 yep I'm good

[@DjClarky78]

Good. Fuse?

[@JohnMichaelMurphy13]

Yes It was a fuse but not the audio fuse. the 10 Amp just above it blew (R/LP) ? Not sure what is for !!.But it caused issues with internal lights, electric windows, central locking, rear fogs, fuel tank indicator, reset the clock every time I started the car and possibly more that I have not found.
All good now swapped out fuse and all working. So the moral of the story is disconnect battery first

[@JohnMichaelMurphy13]

Thanks for your help !!

[@ivanadisusanto3617]

Thanks for the video! Very helpful :) Just wondering, I am having difficulties removing the nut that locked to the mount. What is the name of the tool that you used and could you tell me also the size? So I can buy the correct size. Thanks!

[@DjClarky78]

+Ivan Adi Susanto Hi, it's a 10mm socket on a ratchet. 1/4 inch drive.

[@ivanadisusanto3617]

+DjClarky78 Thanks for sharing mate!

[@katedillon8591]

Thank you...great instructions :) I want to remove the antenna and the base mount permanently from my van as it's preventing me getting into garage. Do you have any suggestions on how to cover the holes on roof from base mount removal with something flat so there are no leaks?

[@DjClarky78]

Hi Kate,
That's an interesting question...
So, with the antenna removed (just base mount left) it is still too high to get into the garage?
You could try a grommet siliconed in place.
There are also things called "liquid tight plugs".
The only other thing I can suggest, is to get some thin(ish) black or white plastic - maybe 1mm thick. Cut a rectangle of it, then silicone it in place over the holes.
1) Cut the rectangle of plastic a bit bigger then the hole/s you need to blank.
2) Clean and dry the paintwork and the blank
3) Sit the blank over the holes, and centralise it.
4) Masking tape the paintwork around the blank, so you don't get silicone everywhere.
5) Remove the blank, then"butter" both parts (paint and blank). You butter both parts, to ensure maximum adhesion.
6) Push the blank down firmly on the paintwork, wipe off excess silicone, and put a weight on top of the blank to hold it in place while it dries - I'd certainly leave it somewhere dry overnight.
Plastic, I'd maybe look in a hardware store for something you can cut up. Plumbing section maybe?
Silicone, You can get roof and gutter silicone, that is designed to be used externally and exposed to weather.
Let me know how you get on.

[@katedillon8591]

@@DjClarky78 Thanks so much - great suggestions and now I feel confident I can remove the antenna and base mount and plug the holes without causing a disaster :)

[@SJKovac]

I have an 07 Hyundai getz and was wondering can I get s shorter antenna?

[@DjClarky78]

Jovaski Wolf Kovac - Yes. They just unscrew. Have a look on ebay. Be careful though - they can get stuck on (hence this vid)

[@adoreslaurel]

Make sure the new roof fitting earths to the underside of the roof and use a resistance meter to check the radio end with one lead and the other to body earth near the radio cradle, also check resistance between antenna and centre prong which enters radio to ensure no breaks in inside wire. Good article on this on google, tyhats where I got this info. they said these problems make for bad AM more than FM.

[@DjClarky78]

Thanks for the useful info!

[@adoreslaurel]

DjClarky78 You are welcome, Computers can be useful sometimes as well as a bloody annoyance when you can't find what you want.

[@adoreslaurel]

DjClarky78 And now for the sad news, did everything as shown, even tried to scratch paint away from the underside of the antenna hole in the roof to give contact to the aerial outer sheath before bolting it up, then actually got a reading showing connectivity between outer sheath and roof "iron". refitted radio, No difference, only thing I can now do is alter angle of Antenna, smeared some protective grease [food grade, high temp] around the outside of antenna and inside roof area to ensure no corrosion of tilt mech also on thread for antenna stork. Radio may/may not be a problem, probably not.

[@DjClarky78]

john brown Hmmm. When was the radio last working properly?

[@adoreslaurel]

DjClarky78 Car was 3 years old when we got it, AM always sounded like you were up in the country slightly out of range, 621 and 774 were reasonable but the higher number AM stations were the worst, would like to try a radio in another GETZ and see how it sounds. FM is a lot clearer..

[@kaustavdutta8659]

thnku

[@DjClarky78]

You're welcome, thanks.

[@maximtos2631]

Спасибо.

[@DjClarky78]

пожалуйста

[@CharlotteGould07]

Hi do you have a link to the mount? I’m searching eBay with no luck!

[@DjClarky78]

Hi Lotti,
Copy and paste the part number 96220-1C010 into eBay - see if that helps you.

[@ronabdilla5306]

I have a 2006 Getz guessing it would be the same.?
But couldn’t see were the part number was.?
Cheers Ron 👍

[@DjClarky78]

Hi Ron - not sure if it's the same I'm afraid.
The part number is in the description below the video - it is 96220-1C010
Hope you are able to fix it.

[@ronabdilla5306]

@@DjClarky78 cheers mate.
Thanks for the feedback 👍

[@DjClarky78]

@@ronabdilla5306 No worries Ron - let me know how you get on.

[@thanors1492]

At 3.27 roughly you mention the metal bit hits the roof and the nut goes to the left side. Would be the same on a Nissan Juke 2017 as I can loosen the nut what hits the roof which leaves the antenna base loose but can’t get it to come out off the roof. Any ideas much appreciated

[@carlostorrado8844]

Merci

[@DjClarky78]

De rien

[@nedrdiazretamales5213]

Sabes como intalar espejo retrovisor en mi auto esta la pura base pegada al parabrisa

[@DjClarky78]

(Traductor de google)
Lo sentimos, no sé cómo quitar o instalar el espejo.
Buena suerte

[@cpcnw]

the i10 is very similar to this also

[@SC-vi4xi]

I can't find a video for the i10, mine is a 2010. Do you need to remove the light or does it come down with the lining.

[@supasaz]

any difference for model with electric sunroof?

[@DjClarky78]

No idea. Sorry.

[@spirosbla]

Same work but you pull off the glass of the light and you see 2 rusks and you removed and you do the same.

[@erickestacio1068]

is it the same removal as mazda 2 demio?

[@DjClarky78]

Hi Erick - sorry, I don't know I'm afraid. :-(

[@KekkoLinkin]

How to find replacement piece? I don’t find anywhere
Hyundai i10

[@DjClarky78]

The part number for the Getz is in the description. Not sure if it's the same as the i10 ?

[@jessgranada3241]

is it just me or i hear gordon ramsay do the voiceover? :D

[@DjClarky78]

😆 Thanks Jess.
You're the second person to say that.
I'd like to have his money..

[@nedrdiazretamales5213]

Como traducir comentarios

[@DjClarky78]

Traductor de google

[@Skyscraper2015]

I can't help but notice the lean windmill in the background.

[@DjClarky78]

Yeah - the neighbor has fixed it up now - this video was filmed about 8 years ago.