FORD FOCUS 2.0L DURATEC: PCV VALVE, HOSE & INTAKE MANIFOLD GASKET (manifold bolts sequence).
Vložit
- čas přidán 30. 12. 2020
- Everything you need to know how we replace Positive Crank Shaft Ventilation Valve PCV VALVE, PCV HOSE & INTAKE MANIFOLD GASKET on FORD FOCUS 2.0L DOHC DURATEC ENGINE.
Intake manifold bolts sequence and torque.
Intake manifold bolts torque: 13 -15, ft-lbs
#fordfocus #duratec #pistonshack
PistonShack's Top Diagnostic Tools:
1. BlueDriver Bluetooth Pro OBDII Scan Tool amzn.to/2X9hnFX
2. LAUNCH X431 V+ 4.0 Bi-Directional Full System Diagnostic Tool amzn.to/3jzJaHc
3. Automotive Digital Oscilloscope Hantek 1008C amzn.to/3jzJaHc
MY TOOLS & FILMING GEAR I USE and RECOMMEND (affiliated links):
kit.co/pistonshack
More Ford Vids? Check, FORDing, We Drive Ford Playlist:
• FORDing, We Drive Ford
DISCLAIMER: Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK. - Auta a dopravní prostředky
It has been a very long time since I have had to do my own car repair. However my husband passed away 6 weeks ago very unexpectedly and my car was in need of repair at the time.. so I bought my intake manifold gasket set and I found your video and I fixed my car and I just want to say thank you so much for the videos that you post. There's no way I could have ever afforded to pay someone to fix my car especially not right now. Your video was a lifesaver
My condolences with your greatest lost Renee. So sad to hear that.
It's not that difficult to do PCV valve and intake gasket on 2.0L Ford Duratech, that it might look on a video. Let me know if you have any questions. God Blesses You.
I hope you didnt have as much trouble completing this as I have, given what you have gone through- you should be on a beach somewhere or doing something more enjoyable. condolences.
Renee did you have to Change your Pcv valve too or just a Manifold leak?
Nice Renee..
Thanks! My daughter's '06 Focus needed the PCV hose. I'm fairly experienced, but it would have taken me another hour or so without your video.
Glad it helped Erik! I was doing it for the first time as well)
Great idea placing the bolts in the screw holes on air intake & throttle body ! My father was a mechanic, I grow up in a garage my father always told me The service book are only 50/50 on information.
Great video. I broke the barb off the fuel pressure sensor too, good to remove that. Appreciate the tip on removing the throttle body.
always clear and concise videos.....thank you
Thanks Bruce! I am glad you like it! Happy New Year 2021!!
The guy who designed this motor I’m sure has family members who are mechanics.
Good point, I haven't thought about it. 2.0L Duratec engine is not too bad, most of the components hidden under the intake manifold. Cheers!
I was a bit confused on how to do this because the Haynes manual didn't explain it well. But you explained it perfectly! I will be doing this soon, thank you!
Hi FalconMFilms! Great to hear that! I couldn't find any decent information with all details online. I tried my very best to make it clear and straight to the point. Let me know if you have any questions. Whatt Ford Focus do you have? Cheers!
Sorry for the late reply, I’ve been busy fixing some more pressing issues (wheel bearing, wheel cylinder, cv axle, motor mount). Had to put the intake manifold work on hold for now. Thanks, I’ll let ya know if I got any questions. I have a 2006 focus zx5, I mainly use it for daily driving and autocross.
Keep it up man!
You bet brotha. Sounds like serious repair is going on! In Canada Ford Focus is not very popular loved vehicle at all. Take care!
great job and great video, regards from ARG
Thank you! Cheers!
The worst thing about the location of the PCV on this engine is that it can need to be replaced between every 20,000 - 50,000 miles, despite Ford's recommended 100,000 mile interval. I'm about to do mine because all the signs are there. Bank 1 lean code, rough idle both hot and cold, leaking valve cover gasket, and the car only has 65,000 miles on it.
I'm seriously considering gutting the old PCV valve so I can place the new one in a remote location out from under the manifold.
Did u manage to replace it without removing the manifold?
Great Thorough. Detsiled.
Glad it was helpful!
Job excelent and clear
Thank you Rubio! Cheers!
More interesting Ford Videos:
WHY YOU SHOULD NEVER IGNORE FAULTY PCV VALVE?! Small Valve BIG problems. Ford F250 PCV valve change. czcams.com/video/tdeoA4m2IWE/video.html
FORD FOCUS MANUAL TRANSMISSION MTX-75 GEAR OIL CHANGE PROCEDURE czcams.com/video/wqCCwpIwdDg/video.html
FORD FOCUS 2001-2007: CV AXLE SEAL, LOWER CONTROL ARM, BALL JOINT REPLACEMENT. czcams.com/video/Y9muf6Hj_TA/video.html
FORD FOCUS LOWER ENGINE MOUNT REPLACEMENT (2000-2007) czcams.com/video/PELYTVgcFsQ/video.html
FORD FOCUS 2.0L DURATEC ENGINE SPARK PLUGS REPLACEMENT (2001-2011) czcams.com/video/RsZ4h3sxaus/video.html
FORD FOCUS 2.0L DURATEC ENGINE VALVE COVER GASKET REPLACEMENT czcams.com/video/sIQE6eSf9bA/video.html
7.3 POWERSTROKE DIESEL: FUEL FILTER REPLACEMENT and PRIMING FUEL SYSTEM czcams.com/video/FNRYRRFEZmw/video.html
How To Diagnose and Replace Windshield Wiper Motor on Ford F-250, F-350 (99-07) czcams.com/video/5a5_JreHnsQ/video.html
MY LIST OF CRUCIAL QUESTIONS TO ASK CAR SELLER BEFORE YOU GO TO CHECK IT OUT. FIND GOOD CAR & SAVE $ czcams.com/video/y7FL8V9Ct9I/video.html
HOW TO REPLACE FUEL FILTER on FORD F250 F350 gasoline TRITON 5.4L V8 or 6.8L V10 czcams.com/video/AVc0Ou2DJQY/video.html
SERPENTINE BELT TENSION REPLACEMENT on FORD F250, F350 Triton V8 engine 5.4L czcams.com/video/5X-Vflmcc6o/video.html
TROUBLESHOOTING LICENCE PLATE LIGHT CIRCUIT. Any vehicle. Fixed! czcams.com/video/230Au9Y3d80/video.html
Very good! Nice vidéo my focus is on 3 ks and light keeps coming on for vaccum leak. I guess i'm going to check that. Thanks.
Glad it helped Paulty!
Thanks!
You bet! Happy New Year 2021!)
replaced the vacuum hose in 10 minutes, thank you
You're so welcome Russ!
Thanks man
You're welcome Victor!
Ive had oil leaks from valve cover gasket which needed replacement . Someone suggested I might need to replace PCV valve valve. How do we know it needs to be replaced ?
thanks i am doing this job and this has been helpful. Having a hard time with the ring that holds down the pcv valve. Which way does the plastic ring turn to take it off?
I think you have to turn that plastic locker ring counter clockwise 1/4-1/2 of the turn ti take it apart.
TIP use ratchet straps and pull motor away from radiator just a small amount and you will not damage gaskets while placing intake on
So the hose on the bottom backside is the PCV hose? How hard will it be to replace? I have a 2013 ford focus se
I semi regularly clean everything under the hood. Just use purple power cleaner spray. Spray everything let it sit few minutes then wash off.
Is this the same job that needs to be done on a mazda6 2.0 petrol from 2010?
Thanks
Hello! Could you possibly tell me the name of the hose at the 4:00 mark? I’ve been searching for the name for a while. Your video is the only one I’ve found that shows it. You don’t discuss it cause it’s not part of your problem. But your hand is over it at the 4:00 minute mark in video! Thanks in advance!!!
This PCV acts like a check valve or it allows air to pass in both directions? 👍👍👍
Hey man I just got done doing this today I’m waiting on the hose and valve. I have oil residue inside the intake where the pcv hose attaches, what does that mean ? Does it just mean the pcv valve failed??
Hi Parker. Most likely PCV valve partially stuck (clogged) closed or tube got clogged up. Little bit an oil is fine. Did you drain any from intake manifold?
Granted I haven't done this job which is why I'm watching the video, but putting the intake gaskets on after putting the manifold in there seems insane. Don't they easily fit into the plastic grooves on the intake manifold? I replaced gaskets on the valve cover and it looked like the same thing. If you are worried about scratching them with the fuel rail, the fuel rail is really easy to remove. Am I missing something?
Hey brotha! This way worked well. I tried the way you explain, I just didn't want to remove fuel rail off. Just tried to reduce amount of parts taking off. Thanks the advice. Have you done your repair already?
@@PistonShack No, it's not the weather here to be doing this right now, unfortunately. I don't have a garage. Didn't mean to be offensive.
I have a lot of oil at the bottom of intake manifold. Would replacing pcv valve and hose help?
Most likely it should take care of the oil problem.
Why not remove the fuel rail ? It appears that you may have way more access with it out of your way. Its just 2 bolts, the 4 injector wiring harness's, fuel input line and the rail and injectors pops right off. Would that not be worth the time to do it for this job ?
Good point Bevis! There's always some better ways to do it. Thanks for sharing your advice. Cheers!
I have the exact same problem. My car is also equipped with lpg from the factory. Do you know how can I move the plg injectors rail away to make space?
Hi Alin! Oh, I see. I am not sure but I think should not be much difference than removing gasoline fuel rail. Let me know what did work for you. Cheers!
@@PistonShack it was actually easier than i thought regarding the fuel rail. However i got stuck on the last 2 bolts from the center🤬🤬😭, i can't reach them i managed to get 6 bolts out and all the wires away, but those bloody bolds i couldnt and I had to abandon and put everything back together. I will try tomorrow maybe, after i buy another extension for my rachet. I had 2 extensions but they aren't enough apparently. Those bolts are way deep inside. I Have the 2009 2.0 focus and it's slighly different from the pre facelift version
I know brotha they are hard to get. Just get bunch of different length extensions, deep and shallow sockets with a swivel to rich them.
Would have maybe been easier to disconnect the hose for the PCV valve on the intake manifold side and leave it attached to the PCV valve until after intake manifold removal.
Hi Paul! Interesting point. Let me know if it work out.
Same as Mazda 2ltr petrol??? Looks same..❤❤
Is $525 a fair price for rear end crankshaft seal, replace pcv valve and a couple cracks in aluminum oil pan where AC compressor is mounted on ? 2016 Focus SE 2.0L duratech engine.
Hey Frank! Sounds like you had good deal for the work shop did. Check front side of the engine where is serpentine belt, AC compressor should be there. Thanks for you feedback.
@@PistonShack no , about to get it done. That's price he quoted me. He also said I should clean engine ( which I've done) to truly check it to see any oil leaks. Also, if timing cover is leaking oil that must mean the engine crankshaft front seal is bad too right ? I don't think it is but asking just in case.
I would clean inside the engine cover, let engine warm up and idle while looking for any leaks with bright flash light. Most likely oil get inside the engine cover. Normally, seals shouldn't leak on 5 years old vehicle.
lost 2 sockets so far, soon out if 10mm
Hello will this help with Blow by??? Thanks
If your engine isn't worn out it will help to reduce crank case pressure for sure.
do you have a part number for the pcv valve?
ever find the part number?
Do you find it ?
Thinking I'm going to do this job on my car sigh not looking forward to it
Sounds good Gage! Let me know if you have any questions.
@@PistonShack can I get the manifold out if I just take the fans out and leave the radiator in
Well, if u say the hose still good,then what was the point of the job? Thanks.
Hey Norbert. PCV hose itself wasn't bad but we replaced with new valve and hose as well.
I hope engineers are not religious because I mentioned all the saints available. My showel sized hand can't reach that damn bracket on the pcv valve, I'm already 10 hours into this.
Brother, I feel your pain! I was struggle for me as well.
They make long nose grip pliers.....
You do a lot of senseless babbling that doesn’t give any real useful information. Things I was looking for to see where they were or how they came off you didn’t cover at all.
Blab, blab, blab,
Maybe you should have taken more than 8 minutes