Schluter DITRA Installation Mistakes and How You Can AVOID Them

Sdílet
Vložit
  • čas přidán 24. 04. 2024
  • This video shares Schluter DITRA installation mistakes and how you can avoid them. If you're remodeling a bathroom and need help, join our Video Library at homerepairtutor.com
    #howto #diy #bathroomremodel
    Schluter DITRA Installation Mistakes and How You Can Avoid Them
    0:01 Schluter DITRA installation mistakes
    0:18 Tile floor selection
    0:29 Tile requirements for Schluter DITRA
    0:58 Floor joist requirements
    1:55 What are the requirements for DITRA subfloor
    2:43 Bathroom subfloor repairs
    3:40 What type of mortar do you use for Schluter DITRA
    4:36 How to prep plywood subfloor for DITRA
    5:18 What size trowel to use for DITRA
    5:26 How do you attach DITRA to subfloor
    These supplies were used in our video:
    -Schluter DITRA
    -ALL-SET Mortar
    -Schluter DITRA Trowel
    -Raimondi Fido Hand Support
    Some product links may be Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
    Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
    Disclaimer:
    Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.
  • Jak na to + styl

Komentáře • 12

  • @OwBrown
    @OwBrown Před 19 dny +1

    Thank you for this video, very informative

    • @HomeRepairTutor
      @HomeRepairTutor  Před 19 dny

      Thank you for watching and for your kindness 🙏🏼

  • @martinkoenig172
    @martinkoenig172 Před 19 dny +1

    Well done.

  • @chih-yuhung2391
    @chih-yuhung2391 Před 3 dny

    so should I prime the subfloor and then dampen it before apply thinnest?

    • @HomeRepairTutor
      @HomeRepairTutor  Před 3 dny +1

      If the subfloor looks like it has contaminants I’d prime it

    • @chih-yuhung2391
      @chih-yuhung2391 Před 2 dny

      @@HomeRepairTutor OK, I thought prime would stop water dampen subfloor. Thanks

  • @jasonsgrowingtree5764
    @jasonsgrowingtree5764 Před 19 dny +1

    I just tiled a small laundry room floor and didn’t wet down concrete. Then I see this video the very next day. Ugghhh

    • @HomeRepairTutor
      @HomeRepairTutor  Před 19 dny

      You might be fine. It's just an installation principle to follow to reduce the odds of installation failure.

  • @mrdavester
    @mrdavester Před 19 dny

    Why do we need ditra? i mean i did a schluter tiled.. curbed shower, but regular water resist vinyl flooring planks on the bathroom floor..

    • @HomeRepairTutor
      @HomeRepairTutor  Před 19 dny +1

      DITRA is mostly used for ceramic, porcelain, and natural stone floors. It uncouples the tile floor from the substrate and prevents tile/grout from cracking. Thus, it's not necessary for vinyl. That said, I'm not a big fan of vinyl because water can get get between the seams and trapped underneath. This trapping of water can ultimately cause water damage to the subfloor. If you installed it over concrete, then it's less of an issue. But I like tile more than vinyl because it's hygienic and imo more aesthetically appealing. It's just a personal preference.

    • @mrdavester
      @mrdavester Před 19 dny

      @@HomeRepairTutor I chose the vinyl over tile ultimately because it was thinner. Too much of a tripstep up from the hallway. I like floor transitions as flush as possible