Oil on the aperture blades in Non-Ai Nikkor-S 50mm 1:1.4
Vložit
- čas přidán 11. 09. 2017
- Oil on the aperture blades in Non-Ai Nikkor-S 50mm 1:1.4
I use 99% Isopropylalcohol to clean the aperture blades and other aperture parts.
Here are some link's to different repair tool's and lubricating stuff:
"ORBIT" HEPA Blower:
photosol.com/products/orbit-h...
You can buy it here:
www.adorama.com/cpkhjdb.html
"Liqui-Moly" LM 50 Litho HT:
www.amazon.co.uk/Liqui-Moly-L...
"Liqui-Moly" LM47 MoS2 grease with Molybdenum disulfide:
products.liqui-moly.com/lm-47...
or on Amazon:
www.amazon.co.uk/Liqui-Moly-3...
Contact glue:
www.loctiteproducts.com/en/pr...
Japan Hobby Tool rubber cone:
www.amazon.com/Japan-Vacuum-C...
18 different size rubber repair tool's:
www.amazon.com/Sizes-Lens-Fil...
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
www.amazon.com/dp/B00QRPWCN0/...
JIS cross head screw driver's:
www.amazon.com/Moody-Tools-58...
Or this set, that is the set I use:
eustore.ifixit.com/en/Tools/D...
Lens cleaning wipes (PEC-PAD):
www.amazon.com/dp/B0161VIZZ8/...
Thin Cotton Buds x 200 you can buy them here:
www.muji.eu/pages/online.asp?...
DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm:
www.amazon.com/DSLRKIT-Repair...
Japan Hobby Tool Helical Grease Made in Japan:
www.amazon.com/Japan-Hobby-He...
Loctite 222 50ml Threadlocker
www.amazon.com/Henkel-Loctite...
very accurate work.you are a true guru of this kind of work.
Good Job! Unmounting, cleaning and mounting the diaphragm lames is allways a critical and difficult matter, I have done that only one time, on a Canon EF-S 17-85, and it was enought for me! ;-D
I bought a defect Sigma 24-70 2.8 for Nikon (35 USD) , i hope i can repair it. Thank you for the vids.
Hi Mikeno, Just found a nikkomart FT in my grandfrather's closet. I can't chance the aperture so I thought the problem was with the aperture blades, but along your video I figure out it's not opening/closing the aperture because the silver ring with a fork inside. It's kind of lose and the fork keep falling from the screw. What can I do to fix it? Thank you so much :)
Thank you for your videos Kenneth! Do you happen to have one for Nikkor 35mm f/1.4 Ai-S?
Not at the moment...
Hej Kenneth. Virkelig gode videoer du uploader. Jeg er i gang med at reparere to canon 17-85mm f4-5.6 og en canon 17-55mm f2.8. Jeg har set at du har arbejdet med nogle af de moderne canon objektiver også. Jeg oplever, at 'zoom barrelen' bliver ujævn og strammere, når man zoomer. Jeg vil derfor prøve med noget 'grease'. Jeg er dog lidt fortabt i ,hvilken grease jeg skal købe... Kan du anbefale noget? Er super lube godt til zoom barrelen, eller kan du anbefale noget bedre? Jeg håber du har tid til at hjælpe! Mvh Rolf
Ville Super Lube være godt?
i repaired my Sigma 24-70 2.8, but i need two new Brushes. any ideas where i can buy them. thank you!
You can try this site: camerarepairparts.com/sigma-spare-parts-1681-c.asp
Hi Mike, I have a 28mm f2.0 non ai n nikkor lens that can't focus at infinity. You can show mw how to disassembky the lens. I will try to fix the problem. Thanks in advance
Well Marco, I only have the Non-ai 28mm 1:3.5, but I will make a film about that lens. I think it's made the almost same way, about that focus system.
Cheers
Kenneth
Very good video recording was this on your own?
Thanks Geoff, yes it is my own.