3D Printed Pin Support Challenge 😱
Vložit
- čas přidán 10. 11. 2022
- 🔥K1 MAX on Sale: www.shareasale.com/u.cfm?d=10...
$50 OFF Coupon: TIER50
🔥Creality K1 on Sale: www.shareasale.com/u.cfm?d=10...
Coupon Code: AFK130
I'm always amazed at the things that 3D Printers can do!
🌈BEST PLA Filament: www.printbed.com/home?tap_a=1...
GCode Here: fullcontrol.xyz/#/models
Patreon Support: / jjshankles
Support me on CZcams: / @jjshankles
⚙The gear I use:
3D Printer: amzn.to/3mpSBeZ
Polymaker Filaments: us.polymaker.com/products/pol...
Main Camera: amzn.to/2RNpEbV
Nifty 50 Lens: amzn.to/2Ls60ky
Sharpest Wide Lens: amzn.to/2XOj1v8
Telephoto Nikon Beast: amzn.to/2xqSUvz
Favorite Not RODE Mic: amzn.to/2C4W0se
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Atomos Ninja V Recorder: amzn.to/2FL03LO
Affordable Studio Light: amzn.to/2rzdAic
#shorts #challenge #3dprinting - Věda a technologie
Damn, clean that nozzle please...
To everyone here, you are loved, things will be ok, never give up, don’t lose hope, keep going in life, you are loved always. I’m so happy your here with us. Be safe out there! ❤ Also, there is no need for meanness, hate, or violence. Have a great day! ❤️ ❤❤❤❤❤
Yeah it always looks worse when I zoom in this much for a video! Haha
just wait until you see my printer... 😬
you don't need to deep clean your nozzle. this is how a normally used nozzle would look like, it would be a waste of time.
mine is worse after like 3 prints 😂
that imperfection will haunt me forever.
I know 🥲
Ok lol
Right?!? Hahaha that little bit of gunk. 😅
JjHHHHHHHHH HHHHHmHHHHH
Hahahah
Filthy nozzle means it stays busy 👍🏻
no pain no gain 💪🔥
no balls no babies 💪🔥
No clean tip no more projects🤔
no dirt 💩 no squirt 💧
@@traindude432🗣️🗣️EHAT💀🙏🔥
I like how the little debris on the bottom of the nozzle ended up giving you quite a convenient Little Hook to loop string through.
500 liek no coment??? 🤔
@@Imma1humanbeingannoying kid no btiches?
@@Natalietrans ik but I was actually confused usually 10 likes gets a comment but 500???
what do yoy mean?
is this faked?
with weight capacity of a gram
1. The nossle is so dirty
2. The straggler at the beginning omg
3. WHY WOULD TOU NOT SHOW IT FINISH OMGMGMMGMFMFMFM
4. .xyx
It fell at the end
Everything you said is wrong
@@capybara9521 oh no I made a typo😐
Everyone notice first point lol
That printer looks like the public bathroom that hasn’t been cleaned since 1950
The nozzle* but true LMAO
@Seeyou Seemee No it didn’t lmao, did you see the bottom of the orb? 💀
what would you use to clean the nossle?
LMFAO 🤣🤣🤣🤣
I run a 3d printing farm and my oldest printer block looks like it's been at the bottom of the ocean
me: amazed at out how it printed without turning into a spaghetti monster….
everyone else: complaining bout the nozzle 😭
Forreal!
🤣 ikr
Stick with it, you'll get there
If you are amazed by such simple thing it just means you never used or seen a 3D printer in action.
@personalemail9329 if you condescend to others about such a thing, you have a narrow world view 😊🎉
@@personalemail9329 i have seen & used 3D printers for designs when I was in school :) even considered buying one for home. thanks for your input though
The nozzle path is compensated for the extra wobble resulting in a clean spherical build, amazing❤
I love the part when he shows us the finished product
What are you talking about he didnt
I know the joke by the way. I did this just to annoy yall
Woosh
@@A_Foolish_personthat's the joke
@@A_Foolish_personsmh.
Lol
My question is how on earth did I end up on 3D printing CZcams shorts?
Happened to me on TikTok. I've now had a 3d printer for over a year.
rabbit hole
happened to me and idk they just keep coming at a rate that isn't too off putting
Cause it's a sign to join us
One of us, one of us, one of us
@@kowalski2334 stalker alert
OMG, it worked on my Prusa i3 first try... amazing what FDM can do.. looking forward to techniques showing up in slicers!
Really good visualization of how much force the nozzle puts onto the print
The "dangler" in the beginning is killing me 😱😂
Nice Like 666
1.1k nice
💀
💀
Dingleberry ahh printer 💀
printing one right now and it`s doing absolutely fantastic job at 100% speed!
To everyone here, you are loved, things will be ok, never give up, don’t lose hope, keep going in life, you are loved always. I’m so happy your here with us. Be safe out there! ❤ Also, there is no need for meanness, hate, or violence. Have a great day! ❤️ ❤❤❤❤❤
@@jesuslovesyouandisthewayto1114
😐📷
😐📸
🎞🤖
@@jesuslovesyouandisthewayto1114 thank you
@@jesuslovesyouandisthewayto1114 alright, MR bot. Your name takes two whole sentences …
@@goldenorb1210
I just love it when they never show u the finished project.
a friendly reminder. NEVER run gcode you found randomly on the internet. even if not malicious, the gcode was not written with your printer specifications in mind and can cause serious issues or even damage to some printers.
Yeah, that's very true, but you can trust a pretty famous YT Channel.
The website has you select your printer model and has unique geode for different printers
Wish I have read this few days ago.. 😢
What kind of damage?
As someone said you can choose specific printers and settings on the website, it was developed by a lecturer at my university (Loughborough in the UK), in general good advice but this site is definitely safe and let’s you do some pretty cool things by having ‘full control’ over the gcode and how the nozzle moves
X Y ZEE....
Subtitles: best I can do is X Y X
CZcams Autogenerated Subtitles: XYZ
How do you see subtitles on shorts?
@@YRO. click the three dots
Click on subtitles
Choose your subtitles
You're welcome
@@wiliwilo I meant on desktops
@@YRO. 🤷♂️
Pretty cool how it's able to stay on track even with it wobbling back and forth
Edit: *Thanks for all the likes* ❤️
Plastic do be sticky when molten
It's wobbling because its moving it
@@Lucas_van_Hout you'd be surprised how untrue that can be in printing
not really wobbling it's moving it as it prints as it prints one side it's causing it so slightly slightly lean and sped up going from side to side really does appear to be wobbling though.
Do you think the G code can be written to account for the wobbling? I'm not sure if it's wobbling or not tbh, but it would be cool if you're able to write the code in a way that takes into the account it wobbling in a certain way, to make the print look good.
Its amazing how the printer code also knows where exactly to move on top since its not standing still but at the same time perfectly fit
I can't with how shiny it is.
It's as shiny as light reflecting on water.....
This is both the most satisfying and least satisfying video at the same time.
Exactly what I thought...
Bro is getting so much heat from that “dangler” in the beginning
He reached for it, but was too late.
That's pretty impressive seeing how much that thing is moving and the computer is accounting for that little wobbly and is still perfect
Ngl, watching the nozzle climb at the start with that music would make for one of those great mesmerising youtube videos 😂
This printer looks like it would be able to handle even more.
If they bothered to clean the nozzle from time to time.
It looks like level 3 quarantine hazard
Does the program for this take into account the wobble towards the middle and top? Cause if so. Color me impressed. Just not with this nozzle please
It's not dirty, it's just high level balancing.
They didn’t even show how much it could support they just print what it could support…
I thought bother means brother
that's pretty nuts. That nozzle looks like that because this is a tool and not rare china
Tools still needs to be clean
Its like ur trying to speak, i just know it!
@Hateithere only the areas that effect work quality need cleaning. Or areas where dirt buildup slows production, cutting profits
If you work somewhere that prioritizes production speed, you will get fired if they catch you sitting around cleaning tools that would work just fine without the time and effort.
Right! Like, even if they cleaned it recently, you know it got like this again, trying to do difficult prints.
@Brian Dearden companies run their printers as much as they possibly can - its production rate that causes the mess to build so quickly - every second a business has a machine not producing products/parts, whether it be a 300amp tig welder or a 3d printer, that machine is costing them money
This is why most high-production factories run shifts and operate 24/7/365, instead of running regular operating hours (this is more true the more expensive the machine gets, so with a 3d printer it isn't as big a deal as a shop with multiple Million-dollar CNC machines
Professional-production and hobby level work are not at all comparable, this is why all the hobby guys are shocked at how dirty it is - it's a tool to make $ for a business, it's their favorite beautiful fun toy for hobby guys
The sound effects at the start 😂😂 He took the opportunity. And we all have a dirty nozzle sometimes 😂 ;)
That’s actually a 1/10th masterwork. You have an imperfection from the filament on the nozzle that dropped onto the piece perfectly, to which the nozzle drip secured onto the piece.
If not for the excess part that got secured, it would be worth very little.
The end of it is so nice with them dancing together 😂
Me after Taco Bell
😂
You start shitting out pla?
Taco bell sure does inspire creativity
I too begin printing a sphere suspended by a line from a metal nozzle upon consuming sustenance from the restaurant known as ‘Taco Bell.’
Stop 😭💀
My head still shakes after this video.
My love is 3D printing ❤
That soundtrack is real fire
Название?
@@PavloFinn Lupus Nocte - Powerhouse 1984
Tired of your golf ball falling when you tee off? Why not print the golf ball attached to the tee in the first place. This is genius!
Glad you mentioned "golf ball"
G Code challenge 3-D print a golf ball with all the dimples.
Initially I thought they were making a 3D printed Nail..
And if you fail you get a free wine glass
Nice result.
Does the code compensate for that wobble, or is it only the continual flow that's keeping the nozzle aligned..?
It’s altogether most likely the parabala
It's pretty much the 'parabala', internal radius of the speheroid shape.
I'm pretty sure that's why it's called the Pin Support _Challenge,_ because it takes a lot of code to account for the wobble and still come out with a perfect sphere.
@@MrTrevortxeartxenah, the nozzle doesn't have to move in a special way compared to a normal circular print
Im going to try this with my newest printer :D
It's a fun and quick challenge to test printer cooling
@@JJShankles it... it didn't turn out so well. 🤷
I need to tune it for using a 1.0mm nozzle
To everyone here, you are loved, things will be ok, never give up, don’t lose hope, keep going in life, you are loved always. I’m so happy your here with us. Be safe out there! ❤ Also, there is no need for meanness, hate, or violence. Have a great day! ❤️ ❤❤❤❤❤
legend says the print machine never stopped
The good thing about this compared to machining is that you don't have to worry about the cutting tool shattering and ruining the part
i saw it swaying and all i could think of was 'how do you account for that in the blueprint' and i dont remember the rest of the video. but i like the soft swaying!
Same
Amazing how far printers and Filomena have come. When I was a sophomore in HS they were really new and our class got to use them. Most prints failed but it was still cool, so impressive what you can buy today compared to the first Gen maker bots
I’m dying at how your autocorrect decided to make filament Filomena 😊
I like that you can see the after nozzle expansion very clearly 😊
It worked great on my ender 3, I tried the cone and sphere and it was so fascinating to watch it print like this.
My printer wouldn't get past the raft half the time, I really need to tune that thing
Im amazed it did so well even with the entire thing shifting side to side
That’s a really good cooling system
Can tell someone has had to clean a massive glob of filiment off the hotend before lol.
To everyone here, you are loved, things will be ok, never give up, don’t lose hope, keep going in life, you are loved always. I’m so happy your here with us. Be safe out there! ❤ Also, there is no need for meanness, hate, or violence. Have a great day! ❤️ ❤❤❤❤❤
@@jesuslovesyouandisthewayto1114 a priest molested me. Fuck your religion.
@@jesuslovesyouandisthewayto1114 Stop trying to convince me your God exists. It doesn't.
That's pretty impressive, is it just pla? I'd expect that column too snap.
Yeah just regular PLA
The Full control developers are pretty genius, you would be surprised
That nozzle has been on places thats for sure hahaha
I'm actually so mad that that little piece got stuck on it like that 😭😭😭😭
the background music doh.
It’s from the album “Public Domain Hits of the 80’s vol 7!” I prefer vol 4 track 9 but it is what it is.
Lupus nocte - Powerhouse 1984
Meanwhile, me not even able to get my printer to print a cube:
Finally one that is actually precise
I love the background music, it looks like an old shopping channel ad 😂
Looks like he was trying to make that tower from dragon ball z lol
The start looked like it was gonna teach me about some new 3D printed nail lol
The G Code is ingrained in my DNA Bruh salute from the 80s babies
The video :
My anxiety level : 📈📈📈📈📈📈
At least the mozzle cleaned itself
Injection molding is more practical and way quicker.
To the people complaining about the nozzle being dirty - it might surprise you to learn this, but the filament doesn't ooze out of the outside of the nozzle so that bit of burnt stuff on the wrench flats really won't affect much. Might throw off temp stability a smidge but it's probably negligible.
You didn't see the crap dropping onto the print due to it not being clean?!?!?
@@pdub422 Nobody cares about the "dropping crap"
@@Nsodnoajdjksl lol literally everyone cares, that's the whole point about his comment, responding to all the people who care. If you don't care about print quality then you must use the shitttiest printer available, in which case no one cares what you have to say about printing
@@pdub422 nah, I don't see a billion people caring about that.
@@pdub422 and no, "shittiest" is only used for cussing.
All of you complaining about the nozzle, its really hot so it obviously cant be clean, and it really isn't that bad at all compared to the nozzle I have.
dahell typa nozzle you be rocking bro. if its worse than this consider cleaning it
@@siddhartheaswar959they just said it’s really hot so it obviously can’t be clean
Almost threw my phone across the room when the video ended right before the ball was completed
Me getting anxious whether it's gonna complete printing the top 🥲🥲🥲
It takes specially designed gcode to print literally anything
I love watching this idk why but it’s mesmerizing
Historical footage of a 1890 3d printer
Yet mine can't even stick to the bed
Imagine if your 3dprinter could actually print this fast also be detailed and not have to restart or slow down.
The video is sped up a lot.
I realized that in order to actually print this: you need to factor in the wobble of the sphere as it's printing. That's nutz
This thing could make me golf tees like crazy
what’s the song, it’s bangin as hell
I need this song too =D
It kinda sounds like 'Noodgeval' from Goldband, a Dutch band.
Lupus Nocte - Powerhouse 1984
太厉害了，真是优秀的作品
“You’d be surprised at what your 3D printer can partially not-finish but do beautifully right up until it’s almost done and then stop” is the correct sentence for this video sir! Least that’s what the video proves 🤷🏻♂️ great way for you to get people to go to your channel though! Even though I didn’t but still! It’s worth doing.
THATS MAD IMPRESSIVE
Ok now I know why my toilet keeps clogging.😂
🙄
I’m shocked a 3d printer can do this, I was planning on getting one so I can spend hundreds of hours 3D printing halo infinite spartan armor for a cosplay 😂
buy the bambulab X1 carbon with ams
I like Bambu Labs P1P (or P1S), but do your research before buying.
almost looked like a goblet for a moment
Oh my gosh!! think that would be impossible on the printer I have!!! amazing!
Lol I seen you miss that piece on the nozzle. Happens all the time to me 😅
Qhy was this oddly sensual
This was just the comment I was looking for
IKR 😭
Damn them some bigass layer lines
That straggler in the beginning almost ruined it all 😂
how does the printer adjust for the piece moving around like it is here?
To everyone here, you are loved, things will be ok, never give up, don’t lose hope, keep going in life, you are loved always. I’m so happy your here with us. Be safe out there! ❤ Also, there is no need for meanness, hate, or violence. Have a great day! ❤️ ❤❤❤❤❤
It ideally shouldn't be moving around like it was. It just sort of got lucky that it didn't fall over.
It doesnt.
@@JJShankles
It a VASE MODE after print the RopE ( base .. )
damn, that wobble 💀💀
Went from a nail to a lamp, to a wine glass and then a balloon
this is how we integrate a hollow sphere with dx length rings
Sub! How did you film this?
With a macro lens really close to the printer!
@@JJShankles Thanks JJ
The nozzle is a lot harder to clean than people think.
No, it is not. With PLA you heat it up like 150-160 celsius, so its soft, but not melting.
Then you take a wire brush and scrape it clean. It literally takes seconds. Sometimes i only use wet glasses wipes and remove the excess with a pinching move. Cleaning the heat block is much more tricky so its better to use a silicone sock.
@@tr7851 Maybe it depends on the printer. I’ve always had a lot of trouble with it. Maybe I just did something wrong.
That little piece really triggered my ocd and I was just staring at it hoping it would fall off
A quick wipe down really doesn’t take long or any money.
And it’s just polite.
tell me u dont own a 3D printer without telling me u dont have a 3D printer
The best part of the video is the part when he displayed the finished product!
I guess you couldn't just tell us which G-Code you used 😂
There is no single G-Code that makes spheres, it would be some sort of post processor that spits out a bunch of arcs and lines.
@@clorax1357 hu... tbh that would make sense lol
Gcode is not like a little code, it's a program that has a bunch of little instructions for your printer
А если ножку сделать ещё длиннее, то болтаться будет ещё больше !!!
I love the part when he shows the printer cleaned amd the product finished
I Think, Bro Checked The Patience Level Of This Printer😂😂
Near the end it reminded me of something that it shouldn't have 🗿💀
Если ты залип на этом видосе ,то с тебя лайк))
It’s all fun and games until the printer takes and L and reacts with a Skynet… 🤖 💀