Ep: 1776-0011 We're talking 6mm Max with Clark Curnutt & Brian Cook
Vložit
- čas přidán 31. 12. 2023
- Happy New Year! On today's episode, we NERD out on 6mm Max. We have Clark Curnutt and Brian Cook at the table talking with Mike and Kyle. Hope you enjoy!
Clark Curnutt is multi-discipline competitive shooter. Ballistics nerd. Hobby gunsmif and relentlessly pursuing precision. (Short and sweet bio, gotta love it)
Clark's Instagram: /
Be sure to visit our website:
www.SOLGW.com
Spotify for Podcasters:
podcasters.spotify.com/pod/sh... - Zábava
The 6max cartridge looks awesome, and solves a number of issues with the 6arc. With the 6arc, a 20rd mag becomes a 15rd mag due to cartridge diameter. Also with the 6max, the bolt is able to retain material supporting the locking lugs, and reduces the shear stress on lug for the same pressures. These are the two MASSIVE advantages over the 6arc/grendel chamberings.
After talking to an insider about 6 Max and looking at all the hard data I believe we are at the front end of something truly special. My barrel is on the way as I am typing this out.
is it too much to wish for to see this saami spec'd?
If you guys make the rifles, cool.
But we also need ammo and magazines. If there is no affordable factory ball ammo you can buy and then potentially reload, and nothing but 20rnd Duramags and funky Wilson Combat versions of 15rnd Lancers, this thing is DOA. I love the idea, the ballistics check out, but please don't let it die like the thousands of other wildcats out there.
I don't want you first serious review to happen on Forgotten Weapons.
This is a wildcat round. Only one source for ammo, and guns. For this to exceed it needs SAAMI approval, so other sources for factory loaded ammo. Other manufactures for barrels and guns. The 6mm Max is from the 350 Legend. The 350 Legend is fully supported from the industry and available with on the shelf ammo and guns.
Thank you! I can't wait to get a couple of uppers. One in an 11.5, and one a 14.5. I hope those are good choices.
Very interesting cartridge, but I’m going to wait 2-3 years, before I build a rifle. Ammo availability is what’s holding me back the most. 300 Blackout took a while to be accepted, and I think it got a push, because 7.62x39 became more expensive due to Ukraine.
I can see all the reasons to use this cartridge, but I am really worried that it may not get the attention it deserves! I hope you guys keep going and I am about to switch one of my rifles over now.
Re: Magazines - I'd love to see Magpul put out some dedicated pmags.
This round is very impressive... especially out the short barrels.... 3200 fps from a 10.5" is unreal... predator hunters dream cartridge...
I was told they aren’t going to release nato pressure 6max rounds… Mike M please fix that!
@@danf4037 long as I know what powder to use ill roll my own extra spicy
Very informative, will be watching the Websight.
Great video!
I am training to be a gunsmith now ( I need a job, Mike!) I had no idea what my rifle was capable of when I was in the Infantry and that is so sad to say! I always assumed if someone shooting bad it was always their fault! Now I know it could be the rifle!
am curious what does that training entail? assuming it must be alot more than SDI's online associates degree course
Excited for the 11.5!
Good stuff boys!
I agree that 6mm Max makes 5.56 obsolete, with the logistics being the only thing that is the current consideration. As long as there are 6mm Max 30rd mags, it makes 5.56 pointless.
I can’t wait to buy this set up. Even if the barrel’s shot at 7k shots. Fuck it worth being part of this. Thank you guys for pushing the game all the time.
Stoked for these uppers to come out with ordnance grade steel barrels! I’ll be in that line to purchase one.
I know it's a late comment however my local academy has 300 PRC and they've had it since they opened last year
I have been wanting a SOLGW gun for a while and also been wanting a little further shooting rifle why not get both. I appreciate all you do for the gun industry guys thank you all for the hard work you guys do Lots of people have opinions but you guys have hard work behind your opinion. Love it I’m looking forward to this gun 6max
31:13 MAAA, THE MEATLOAF 😅😅 respect levels higher and higher ❤
If you wanna run this round the same as 556 I’d like it to remain below 2 moa as long as possible on a slow paced(100-200 rounds a month non full auto or dumping mags)shooting schedule
So long as brass and ordnance grade steel barrels are available, I will buy this cartridge. I don't own an alternative AR-15 cartridge but the 6mm Max presents itself as the best available option for myself since I've learned to reload.
I haven't watched the podcast yet, but from what I've been told it's based on the 350 Legend. If you don't have to neck turn it should be pretty easy to form.
It may be a use that most people will never need it for, but I’d like to see what the 6max does to different types of armor.
Waiting on the spr barrel 20 inch in 6Max
It sounds like a good coyote stopping round over 5.56 without the dumb Arc/Grendel bolt.
Need to get SAAMI acceptance.
Need 30rd mags.
Need to show terminal performance on ballistic gel/hunts.
Need to sell me an 11.5”-12.5” barrel. 😅
How does the 6 Max dwell time compare to 5.56?
Velocity is fantastic out of the 10.5” Max but does dwell time increase as dramatically going to 11.5” as it does with 5.56?
Ok, I'm interested.
I am very interested in this cartridge. Especially considering it’s performance in SBR style forearms.
I would like more info regarding the gas system setup per barrel length. Is it similar to the standards for carbine, mid, and rifle lengths?
I see a mk12 mod(S)olgw 6max in my future 😎
Im really drinking to coolaid here. :) Kidding aside, Im ready to move to this platform. Is a 10.5 and 16 both using carbine or do we need to have a carbine and rifle gas system setup on the lower?
Can't wait for this to release. I've never bought a fully assembled gun, but I'm probably going to buy this one. 11.5" if available. My question is how available is the Ammo? I checked online and there were few places I found. Still looking forward to a 6mm projectile from an M4 platform.
I love this nerd shit...Increasing the velocity allows for your holds overs to be much closer together at distance. The projectile isn't falling as fast due to the increased velocity at the same given distance of (x)
Not sure about switching from 6arc to 6max but.... I can say without reservations that the m89 rail and broadsword upper combo is legit.....heavy....but legit... with proof barrel....its very accurate....
I might try the max..... but you gotta get ammo to Alaska for me 😅
Ok. I'm sold. Where do we buy the barrels & Ammo?
The ar15 cartridge to end all ar15 cartridges
I understand you've done SAAMI testing, but can you say when it'll be published as a SAAMI spec?
Still can’t believe they have time for this but no time to answer their customers via email.
SOLGW, can you make a video on why to buy a more expensive SOLGW upper compared to a similar spec'ed upper that's much cheaper.
Im thinking SOLGW vs Bear Creek, but admittenly, i don't know what materials BC uses, but I think thos would be a good topic.
bear creek = illegal beaner operation undercutting american gun companies on american soil
Why don't you bring the 6 mm max to the military with your products
Sitting through this whole damn video geekin' out like a mofo. Still unclear on how bcg/bolt compatibility works.
Same bolt/bcg as 5.56, .350 legend mags unless they have released 6Max specific mags