I test these cheep burr's from China In my Dremel flex shaft. Do they work?
Vložit
- čas přidán 5. 09. 2024
- PLEASE READ COMMENTS BELOW AS THEY MAY NOT BE THE BEST BURR'S.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
All the carving tools i use are in this amazon shop listed below👇
www.amazon.com...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
etsy.me/2Usrss6
/ carving_fusion
/ carvingfusion
I ordered these and after about 2 months they came except they only sent me 3 of the 5 burrs. On top of that, they were dull in a matter of minutes. I mean no disrespect, but in my opinion, these burrs are junk.
Ok good to know thank u
I bought a set of five of these a couple of years or so back, I've used them on oak,cherry,beech,walnut and various types of pine,they still work as well as when I bought them,maybe the ones I aquired came from a better sorse,or I got lucky,they only cost just over a fiver for them as well,so very happy with them.
"Up the stairs and down the stairs" is caused by the direction of rotation of the Dremel. If you push against the rotation you get tear-out. The tear-out is caused as the tool attempts to lift the wood under the burr. Looking down onto the business end of the Dremel, the tool will rotate anti-clockwise, or clockwise when you're holding it point down.
If you are ever looking for language to help with clarity talking about going "down the stairs" with grain, I'd recommend checking out some wood turners, it's relevant in all woodworking, but it is omnipresent in wood turning so they have a lot of experience in explaining it.
Thank you
Thanks, I really value your opinion on these lesser known, cheaper products.
:)
Thank you Jordy for such a nice and practical review. After watching your video we are able to make proper decision about buying.
Thank you Jordy for the review, I've been looking at those for quite a while now.
Thanks liz, we will see how they hold out
I ordered these on Wish about 2 months ago, finally requested my refund this week, ordered them off EBay last night (almost the same price). After seeing this, I think I've done the right thing.
I've looked at these on ebay many times,just never ordered yet..👍
They work good out of the box but I'll be curious to see how long they stay sharp . I like how they come to a point should be good for detail . Thanks for the review .
Me too glen me.too
I always wear a pair of cheap ($25.00) pair of Joe Rocket mesh motorcycle gloves when carving. Saved my hands a few times. With the mesh riding gloves there is hardly any restriction of movement.
great demo. looks like if the cutters get dull they can be sharpened
Yes good point.
But...
Jordy dont sharpen burrs lol
Thanks for the review. I've been thinking about trying these. Now, I believe I will. But you are right the Kutzall style Burr looks to be more controllable. Which would make it better for carving in the long run.
If these work out though, it might be worth going to a machine shop and getting a good setor two made. Just because you can resharpen them. Just my thoughts, but what do I know. Anyway thanks for the video Jordy you did an excellent job.
Cool I remember talking to you about it and you told me to buy them and do a review. I got a set about 5 days ago and I’ll be doing a review soon.
Carlos can u use them on hard wood for a bit before u do review?
Carving Fusion By : Jordy Johnson yeah I have some really hard wood and see how it goes
@@carloscreations6241 thanks carlos live in 25 min
I just read the other comment, and I'm not noticing the bits getting dull. I am saying this with no disrespect to the other comment.
I will say these bits should only be used at an angle. Don't lean them too close to the end of the arrowhead. It will it skip.
Do not use them Tip straight down. There is no point. Only use them after the shape is carved out, and you're trying to smooth the area around the raised design.
Wear all your safety gear, an make sure the piece is on a flat surface, where it can't skip and catch your clothes. I'm also wearing my carving gloves, just incase.
Hmmm funny u say that because I use them for everything :)
@Carving Fusion : By Jordy Johnson Of course you can, and it would be way easier then changing bits. Your obviously very skilled and I just putter. I prefer the the round ball end, it's cuts cleaner. I'll take any suggestions? Did u like my pun?
thanks Jordy. I always see these adds and have hesitated to buy as you don't know what you're gonna get from Wish. But now I might give them a try. Seems like a good deal for the price.
They cut fast but dull fast as well
I'm ordering burrs and bits size 6 for wood sculpture in Botswana
Your stairs comment I think that you might mean go with the grain and not against it. but I could be wrong. I'm not a wood carver yet but I have watched many of yours and Ryan Cook u-Tubes to learn as much as possible before I start. And up to now there is not one piece that you have done that I didn't like (not that you care anyway) and yes also love you honestness about things... love from the Uk "England"
Thanks Phil alway go down the stairs when carvi g with chisls
I bought a set of these from Amazon. Not very good. Maybe for etching soft metal or plastic, but preformed poorly if at all on wood.
I will stick with something better like Kutzall or Sabertooth. More expensive but you get what you pay for.
Honestly I am not thrilled with Dremel brand burrs for wood carving either.
Sorry to hear that
Thanks for that 👍 I bought a set of 20 of the carving bits from wish but the steel is soft & doesn’t last but hey they’re only cheap.
Ok great thanks
They work on linden tree, soft wood for sculpturing, not on a hardwood. That is why they go blunt easily plonkers.
Does it say they are name for softwood?
@@CarvingFusion common sense, why would you use them on a hard wood like oak?use it on soap or linden tree
@@lu9thix keep at it
Awesome vid been curious about these didn't think they would work thanks for the test vid!
Good video Jordy appreciate it I ordered some Chinese aluminum cutting bits two and a half months ago and they're sitting in New York and have been for a month so I don't know about this crazy crap can't get nothing
Initially I thought the burrs were good and cut well, and used with care they should be another string to your bow Jordy but I just read Ed Devaronas comment saying they blunt quickly, and I saw you had replied to him. I just think it depends on the type of wood you use and they might be sharpenable say with diamond files.
I think the type of wood is irrelevant. If I'm always using hardwoods, then I want to know that they're not going to blunt mid project - it could be time critical.
Thanks for your demo. Is your burrs are still sharp? I got mine today, works very well, but i'm intrested, how long?
Thanks and greetings from Hungary.
I find these burs cut very well
can sharpen them with a Diamond sharpening plate knife sharpening whetstone credit card sharpener
Look good for doing lines that need to flow rather than rip. Thankyou 🏴🤔🧙♂️😁🏴for the tip. Still looking pretty sharp yourself ( wife thinks so) ,
I can hear the bur putting lots of pressure on the motor making the cut
This but is more of a wax cutting but for jewelry wax carving 3 blade cutters but it seems to work good in soft and hard wood
I've got them but I didnt buy the cheap ones off wish.the smallest one snapped on me first time I tried it.be careful.lucky for me it didnt fly offat me.stay lucky brother
Ok thank u
Thanks for the video, I ordered a set last week.
Interesting burs I will have to check them out.
Hi jordy,i've just taken up carving wood spirits,are kutzall the best burr to use,at the minute i am using small burrs but they are grooved unlike the kutzall,also i was given a log of mountain ash is it to hard a wood to carve.p.s love your vids.
Thanks from william in the uk.
In my opinion yes kutzall are the best burrs to use, the extreams last me the longest
Thanks jordy am gonna order a few from amazon,as for the ash log think i will leave well alone.thanks for feedback.
Still waiting on mine, supposed to arrive on Sunday the 21st. LOL Not holding my breath on that delivery date. (this is the 3rd date I have received but it says they arrived in country on June 9th.) I think someone has them in their back pack and is walking them across the country. LOL
Hahaha
Carving Fusion By : Jordy Johnson America is so on the outs with China it’s hard getting things from there for us. I ordered some from China on EBay the other day and think goodness they let me cancel. I still got some Chinese Burs out of California. Have not used but they seem really nice. They are heavy and sharpe at least! So glad you did this video. I love getting your take.
Thank you jordy 👊
Very informative. Thanks buddy
Thanks... Those are interesting Burrs and seem to cut well and quickly. Never saw that profile before. Where did you get them?... I checked the description and the links you provide and did not find them. Even tried your 'Amazon shop'... Not there either... Please Link these? Thanks.
He said on the video he got them from the Wish Store. If u don't know what that is u wouldn't have caught it.....U can download the App called "Wish". or just go on the website.... Its a Factory Direct Stuff from China. Stuff is Really Really inexpensive. Some stuff is Really Cheap other stuff is Great. I'd Highly recommend reading peoples reviews (listed under each product u check out) and see how many ppl give the product a Green light or Not. Bc as I said, some stuff is Really Good and u get exactly what u purchased. A lot of times tho its very deceiving and u don't. ALWAYS refer to the reviews. Welcome to the Wish shopping Addiction! LOL! Good Luck!
PS. Orders Take on average at least a Month to a Month and a Half to arrive. That is the worst part about the Store.
Not Always, but most of the time it takes a Loooong while. Usually coming from some weird Province in China LOL LOL! You'll see when u receive a package. Check out the Return Address. You'll be Like WTFFF!!?? From Where???? LOL!
@@markm5555 like mark said 👆
@@markm5555 thanks mark
Plenty on Ebay..
Why would you want to put it up against your skin anyway?
As a bonus you can use them to carve off calluses on toes and heels...(kidding!)
Haahha lol
Благодарю за видео ! 👍🙏😊
Bisa pesen
Hey Jordy, Thanks for that Demo. Helped a lot. Question, I see u Starting up your Dremel and running it without physically turning it on and off by hand. Seems like u maybe have some kind of Pedal attached to it, or am I wrong completely? Is there some kind of Pedal that can be attached to a Dremel like that? I have a 4000 and get tired of turning it on and off all the time.
Ahahha yes i use foot pedals, foredom or from a old sewwing machine
Fordom foot pedal is here www.amazon.com/Control-Variable-Speed-Pedal-Plastic/dp/B00WGVP6Q4/ref=sr_1_1?crid=3FBQOTFM2CQBX&dchild=1&keywords=foredom+foot+pedal&qid=1592457909&sprefix=fordom+foo%2Caps%2C186&sr=8-1
Thanks man.... didn't realize I could attach a Dremel to a Foot Pedal like that. Can't wait to have the convenience of One on mine. I Love your Videos Jordy. U awakened a Monster Carver👹 in me that I never knew was there before! LOL!🤣 Keep em Comin dude....😎👍
@@evilevilrick
DONE!!! LOL!🤣😂😎👍
@@evilevilrick thanks rick
I got em and I think there pretty good
the copy right of one painting of mine is 1 billion us dollars (1+1000+000 000) they the dogs whant to get it for 100 dollars I mean price is illusion (8448)
Looks like they chatter a little. I wonder if it's because of the longer shaft. Looks like they stick out quite a bit. Hi Jordy.
Yes they do rick u really have to work with the grain with these burs
@@CarvingFusion Well, I don't know how spencive they were, but it might be a good experiment to cut about 1/4 inch off one to see if it tracks any better. Just a thought, looks like they are long. The long shaft would allow some flex I think.
@@evilevilrick yes i agree rick, when i am doing these reviews there can be so much diffrent variables, so i just try to leave them as simple.as possable,
The only true way to do a review is to see how they last over time..
Would you agree?
That sounds like a good ideal Rick.
Cheap but dangerous 🆒✌🏻🤠
Hey Jordy 18.3 subs WOW
Thank u slowley growing
great video thanks
Don't do it on your skin, don't do it on your skin, don't do it on your skin... DAM IT! JORDY DID IT ON HIS SKIN!.
GROSS! You are in trouble mister. Always respect tools.
Lol :)
@@CarvingFusion 💕❤️💕
Have you tryed sharpening these they seem to smoke quick?
Nope not yet
ou peut on acheter ces outils?
Is it ok for hard wood
Dulls fast
@@CarvingFusion thanks I have an very dry Oliver wood and it's hard like a stone so it's not good?
@@cornelississelaar well... can't hurt to try out :) but sofrlter wood is better on any type of carving burr
@@CarvingFusion OK I will try have a nice day
Anyone knows where do I find these online? Thanks!
In my amazon store below all my videos in description
What is the name of the Burrs??
No name
No name probably tells us a lot lol. I found them on eBay for right at 6 bucks a set. So I picked up a few sets. Thanks again Jordy.