How to make the cheap wood carving bits a lot better.
Vložit
- čas přidán 3. 04. 2023
- I show how I make the 3 point Chinese cutting bits a lot stronger to make them sharp longer.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?aff=24
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com/shop/carvingfu...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/carvingfusion
Shirts and gear
jordy-johnson-shop.fourthwall...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.com/?rfsn=475825...
Manpa tools👇🏻
www.manpatools.com
etsy.me/2Usrss6
/ carving_fusion - Jak na to + styl
Thanks for the sharpening lesson. Keep going, carve deeper, cause I care!
glad to see your back. Was Evilevil Rick told me how to find you.
Alright Alright Alrighty then great Tip from a awesome guy 🤘 Thanks for sharing brother 🖤🤟
hi jordy. great video as always keep em coming. stay safe.
Hey Jordy, I just subbed, Rock of ages brought me here.❤
Thanks Jordy that looks like a smooth cut too great info carry on
Thanks Jordy/Rob. Top tip.
Jordy, yes that heating is worth the effort if the cutting edge isn’t hurt. The process will harden the head of the bit. The fella in Pennsylvania did a video on his pickup mounted hoist and operated it just throwing out a idea, let me know if I can be of help
That's a good tip,those burrs are good got some a few weeks ago
good video cool tip I'm going to have to try that with my pack!! cool burs if sharpe! Stay safe!
Thanks for the tip. I’m going to try this.
New mic isn’t too bad there Jordy!
Sounds good, have to give it a shot. Thanks and sending positive energy your way.
Going to give this a try
Cheers jordy
HEY JORDY, I work in a steel mill in the heat treat department. I basically strengthen steel that is sold for automotive and oil and gas use. You are, what they call, quinch and tempering, the bur..... sad part is I've never thought of doing it to my burrs. Great video Jordy. That will absolutely strengthen the steel and lengthen the life of the burr. Now you can definitely carve deeper.
Thanks for the tips!
Good stuff!
Great tip from Just Carve Rob Jordy, looks a lot easier than hand sharpening. Thanks guys.
Thats a great tip jordy save buying new ones all the time i wont use as many as you if i need to i know what to do thanks.yesterday (tuesday ) i went to go on your new channel and it was gone and in its place was the hackers how that happened i dont know any way i just unsubscribed and resubed your new one all good now have a good mate cheers mick
Great tip Jordy thanks .
Great tip Jordy thanks I don’t use those burs that much I find they get away from me a bit but I think that’s just a matter of getting used to them I see that you reply to me in the comments sometimes but when I click on to it there’s nothing there 👍🏼🇦🇺
I frank yes I basicly use them for deep cuts, I am aware of the ghost msgs yes
Very useful trick Jordy 👌 👍
Awesome thanks for the Tip Brother.
Hum I just thought you get what ya get with burrs. I'll try that tempering thing. Be well my friend
Fantastic tip jordy thanks very much
Excellent. Got a set of these and a couple of kutzalls on the way after watching your vids. Looking forward to doing some damage to a pile of old wood, and probably a few fingers. Cheers from blighty!
Thx @Just carve rob and Jordy !
Jordy...
Please post on here about your old channel recovery and where you want us to subscribe...
Thanks !...🌿🌿🌿
Getting up close to 1000 subs jordy
🎉
I’m gonna get some carving tools out of those walnut logs and start turning out some varmints of some kind or another
A wood pig rock u need to carve a wood.pig for your pig lol
@@CarvingFusionbyjordy , Yeah, now there’s an idea, if he gets splitters he’s on his own lol
❤❤
No risk of deformation?
Is that your carving fusion back on because if it's not the hacker's are loading videos
Yes it is