⏲️How to Test or Diagnose a Faulty Speed Control Knob on A Mobility Scooter
Vložit
- čas přidán 8. 07. 2024
- SUBSCRIBE FOR A CHANCE TO WIN A FREE MOBILITY SCOOTER! WE GIVE AWAY A SCOOTER ONCE A MONTH!
If your scooter is throwing a 7 beep code, it means that the potentiometer could be bad. There are 2 potentiometers. The speed control knob and the throttle control (usually a paddle system). In this video we're showing you how to test a speed control knob which is pretty easy. You just need a multimeter that is set to measure resistance in OHM's. You can test the 2 outside wires with the multi meter probes and when you rotate the knob you should see the resistance go up and down smoothly. When the knob reaches the highest speed, you should see a reading of zero.
Be sure to check out our repair/troubleshooting mobility scooter playlist for more tips like this one (link below):
• 👨🔧Mobility Scooters D...
To view our complete selection of mobility scooter parts, visit our website with the link below:
mobilityscootersdirect.com/mo...
To view our complete selection of mobility scooters, visit our website with the link below:
mobilityscootersdirect.com/mo...
You may also request a FREE CATALOG via USPS by filling out the form on our website which is linked below:
www.mobilityscootersdirect.co...
If you're on the market for a mobility product, please consider our company (888) 263-5601. We have been in business since 2014 and we the best customer service in the industry. Feel free to check out our reviews and customer testimonials which we proudly display on our website and they can also be seen across various platforms like Google and Facebook.
Thank you for watching this video, don't forget to subscribe or to leave a comment if you have any questions about our products. You can also call us toll-free to speak with a sales expert any time at 888-263-5601
Our Facebook: / mobilityscootersdirect
Our Google Business Listing: g.page/mobility-scooters-direct/
Join this channel to get access to perks:
/ @mobilitydirect - Jak na to + styl
Cheers for this. My scooter is stuck on the highest setting but when I test the speed pot with the multimeter it reads near 100 when applying to the 2 outer wires with no gradual resistance when turning the knob but will move gradually between 0 -100 when connecting the multimeter to the middle wire with either outer wire. Could this be a controller issue?
It is most likely the case. You can reach out to the dealership where you got the scooter from for assistance or if you got it from us, you can reach us at (888) 263-5601.
I have a pride sundancer scooter I need to replace speed pot can I do it myself
It depends, have you any tech experience with low voltage repairs or parts replacement?
How do I know if the scooter module is defective? Good afternoon
You follow along with the video, and you should see an even range of resistance on each side of the mid-point.
Can I connect the speed control lever to a direct link
I'm not sure I understand the question. Connect what to the speed control lever with a direct link?