So many angry viewers over recent video!
Vložit
- čas přidán 3. 06. 2024
- ▼ IMPORTANT DETAILS ABOUT VIDEO: ▼
- The most dangerous angle grinder hacks: • The most DANGEROUS too...
- Video about disc mounting direction: • ASK THE EXPERT: Which ...
★THIS VIDEO WAS MADE POSSIBLE BY★
Sjobergs Workbenches: affinitytool.com/brands/sjobergs
My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery: www.harveywoodworking.com/
My hand tool collection includes premium tools from Bridge City Tool Works: bridgecitytools.com/
Please help support us by using the link above for a quick look around!
(If you use one of these affiliate links, we may receive a small commission)
Some other useful links:
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-sub...
-Check out our project plans: stumpynubs.com/product-catego...
-Instagram: / stumpynubs
-Twitter: / stumpynubs
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-BOW Featherboards: amzn.to/430ldhv
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission) - Jak na to + styl
▼ *IMPORTANT DETAILS ABOUT VIDEO:* ▼
- The most dangerous angle grinder hacks: czcams.com/video/o-imZgxAyIE/video.html
- Video about disc mounting direction: czcams.com/video/H4jayQQbYQ8/video.htmlsi=QbiGoyUjCV7TXYv-
★THIS VIDEO WAS MADE POSSIBLE BY★
Sjobergs Workbenches: affinitytool.com/brands/sjobergs
*My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery:* www.harveywoodworking.com/
*My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/
*Please help support us by using the link above for a quick look around!*
(If you use one of these affiliate links, we may receive a small commission)
*Some other useful links:*
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-subscribe/
-Check out our project plans: stumpynubs.com/product-category/plans/
-Instagram: instagram.com/stumpynubs/
-Twitter: twitter.com/StumpyNubs
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-BOW Featherboards: amzn.to/430ldhv
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission)
@@meinkamph5327 This new rap is pure fire, bro.
Using reasoning and sound judgement to cure the internet police? What gonads you have..
As an expert in safety and industrial hygiene , I can tell you that overemphasizing safety has negative effects because people start resenting the safety sally. People need to be mostly responsible for their own safety so they can take ownership. Wagging your finger at some random video (clearly made for views only) on the internet assumes people are too stupid to come to the same conclusion.
@@thearmy88ify Who overemphasizes safety?
Someone who uses clearly unsafe internet acts and tries to tell people how unsafe they are. Also, companies who have daily safety moments to tell their college educated employees to drive slow in the snow.@@StumpyNubs
Thanks for being a voice of calm and sanity in a sea of overreaction.
Yes indeed. 👍 Thank you John.
Thanks, Stumpy. There's a lot of knuckleheads out there even though you're too polite to say so.
Ditto. I've long considered an angle grinder a dangerous tool and I was pleased to see your warnings. No real reason to even listen to the morons that think they know things but really only know superstitions of the hive mind.
Yipp ❗a 9" Disc on a 2hp Angle grinder rotating at 6,000 Rpm in the centre can be quite lethal & wants to take off..❗
Plunging that into a piece of Steel to cut no matter how thin can be not only hairy but outright dangerous particularly if you don't have the correct size diameter safety washers at the axle & threaded washer often given with the DIY packageis minimal❗ You have to increase the said washers size in accordance to stipulated safety regulations Gazetted in Safety Ordinances,;failing which you have no legal claims if it disintergrates in your hands like a Handgrenade, i've seen a close call with my own Eyes whilst doing Production Engineering for 5 years after my Apprenticeship in Elc't & Mech' Eng..its not a joke..❗
an Angle grinder can be a lethal piece of equipment, i've seen them tumble down Scaffolds during Power Outages etc., on inspection to a Construction Site & cause havoc❗👍🏻
Keep up the good work young man..❗🙇♂️
Bernard B.Arch. M.Phil., PhD (Bld. Sci) Now retired and enjoying my Hobby Bladesmithing and Tool & Die making and treat an Angle Grinder with great caution and respect..❗🙇♂️
Bench Saws are equally dangerous & i cringe when i see blade covers removed and hands near revolving blade without the necessary kick-back precautions..❗🤦♂️
100% agree 👍
"That's why you might stub your toe even though you have 50 years walking experience."
Bro, that is an outstanding analogy. I'm definitely using that in the future!
And, you may have walked that same path for years without stubbing your toe!
I have nearly 60 years of walking experience and managed to stub my toe yesterday on the kitchen door. It wasn't my fault, I didn't realise my toe was on the end of my foot!
I think of this every time I bite the inside of my cheek. You think I'd be better at it by now?
Turning trolls into teaching …Educational judo. Keep up the great work👏🏻👏🏻👏🏻👏🏻👏🏻
This is amazing. He so calmly and fairly responds to everyones critiques and in the process completely slays the trolls. There should be a mic drop at the end of this
Then everybody clapped
A mike drop...with an angle grinder? Do you know how dangerous that kind of thinking is? (kidding)
My husband passed away a number of years ago. Your videos taught me how to safely use a number of his tools that I had previously been unfamiliar with.
Not only do I trust you, but you are delightful.
Thank you.
Sorry for your loss , happy to hear that your utilizing his tools for yourself . woodworking can be very cathartic .
@@redbeard6493 It can be disarming.
This is the way
😢 sorry for your loss. He would be so proud of you grabbing the tools and learning how to use them. This guy is really good can't go wrong with following his tips. ❤
@@deancyrus1 thank you so much for your kind words.
I can't believe anybody would give you a hard time, especially if they are a regular viewer. I, like most of your viewers, appreciate what you do.
There are a lot of lonely miserable people
Most likely not a regular viewer
They are what are known as trolls and have no real life. Keep up the great wok. Always look forward to your videos.
I've been a woodworker for 40yrs and I have watched your channel for at least 10 yrs. I've found your channel very informative with tips, tricks, and great new tool ideas. Your previous video on angle grinders with a chainsaw-like wheel made me toss that wheel. You are right it's just too scary. As to your critics; it's admirable that you mention them, but it seems their just being nitpicky. Don't let them get you down you are doing a fantastic job. Thanks again
Well said. I’m 81 and grew up around deadly machinery large and small and have a tendency to think our very safety conscious contemporary work practises are exaggerated because of insurance and liability concerns. But I’ve taken to wearing eye protection since I no longer wear glasses since I had my cataracts fixed. And I don’t take the battery off my tools but will now on the grinder and various saws when I change the blades or disks.
This video is a perfect example of why you are still my favorite CZcams woodworking channel.
I believe you look out for your viewers safety more than most so thanks for all your efforts much appreciated.
Not only does James share his knowledge of safety on his videos, I have seen where he has politely left comments on a smaller channel where he saw the creator showing something that was dangerous. He took the time to respond to their reply and explain why it was dangerous. He is not just about getting clicks on his own channel.
Absolutely love your ability to turn sour grapes into teachable moments. Keep on keeping safety 1st!
I am 78 and have been a keen woodworker since my teens. Nevertheless, I find your work informative and interesting, as there is always something new to learn, and your presentation of facts is always calm and logical. Keep up the good work.
You can't fix stupid. Thanks for providing good info to those of us willing to listen.
You can fix stupid but darn it's gonna hurt
You took the words out of my mouth!
But is the popsicle stick actually unplugged?? Did you check twice? James, I admire both your sense of humour and your courage to keep doing what you are doing and not fearing dumb-ass comments. Keep it up, man! You have taught me a lot and provided a number of laughs.
Good point! I’d think twice about handling any popsicle stick while it’s plugged in 😆😆
Dude, don't make light. I once checked to make sure a popsicle stick was unplugged, but it was an older model and still had a small charge in the capacitors and a round in the breach. It was 1946 at Bikini Atoll, and the government had to fake a nuclear bomb test to cover the colateral damage.
Great follow up on negative response. Love the parallels you made, particularly 50 years of walking but still stubbing a toe… so true (at 56). Your calm and professional return on snarky comments is well spoken and clear. 👍
Wonderful restraint from blasting your stoooopid critics. You just must be a most forgiving person, With
A- common sense
B- critical thinking
C- Humility
Thank you for YOUR service 😊
I’m a HS teacher and I really enjoy your approach to teaching us all. I wish all professional teachers were as clear and thorough as you are. Keep up the amazing work!
My HS woodshop teacher in the early 70's taught us the safe way to use each power tool in the shop. I have followed those rules since and cringe when I watch videos of people who clearly were never taught properly or just don't care.
I am a 68 year old man who has been using these tools all my life. I watch and learn from all your safety videos all the time. you had one on that chain saw disk you put on an angle grinder, I have one and have used it a few times and it scared the piss out of me. you convinced me to send it off for scrap metal. you may have saved me a hand!
thanks stumpy...
Anywhere you were tempted to use that circlet cutter the new electric tiny chain saws are a better tool (complete with chain brake and room for both hands) they work well for things like carving bears and similar projects.
I'm afraid to use my second- hand compound miter saw because I'm thinking that motor shaft is metal- fatigued and could snap anytime and disc rolls towards me.Has that ever happened in miter saw history?
@@rodenreyes6320 Mine came off recently and when I pulled it apart the gears were shredded. It was really old. The disk never flew off. It came off but it stayed in place and quickly stopped spinning. It would also be stopped by the blade cover. I just bought another one. If you're concerned about it's condition then maybe that's a sign that it should be disposed of.
My dad was a carpenter his entire life, until he died at 69. Most of his tools were carefully stripped of their safety provisions. He used all the most dangerous tools: circular saws, table saws, angle grinders, welders, torches, radial arm saws. Despite ignoring all the safety guidelines, he never had a serious injury. He never fell off a ladder. Never got his hand caught in the table saw. Never endured more than the usual minor injuries one expects when working with his hands. Dad was an amazing carpenter who understood his craft, and his tools, like few others. He knew the dangers, and he knew the best ways to minimize those dangers. Very seldom did the safety provisions that came on a tool actually make the tool safer. They were often clumsy, ill-engineered contraptions that amounted to little more than lawyer repellant. They made the tool more dangerous, because they got in the way, and obscured his ability to monitor the real dangers inherent in a tool.
Most people will never understand how hard it is to be a great craftsman. It takes decades of back-breaking work. However, most people can understand basic safety guidance. Thus, it's easy to look at a craftsman and say something about his craft, without knowing anything at all, by critiquing him on some imagined safety infraction.
Stumpy Nubs has been doing this a long time and, despite his ill-chosen screen name, does not have any stumpy nubs, even though he uses very dangerous tools. As such, he can probably tell us a lot more about safety than we can tell him. Let's allow him do his craft without having to worry about a bunch of safety Nellies poking at him.
I’m sorry to hear that are so many people looking for a place to attack , even when you go so deep on every aspect of any question as allways. You really have a good and patient heart. Thanks for not quiting on us .
You see, this is why I'm convinced to subscribe to you;
1. Calm and informative videos
2. Use of common sense
3. The promise of information you made in the 'clickbait thumbnail' is delivered well
Even a bag of sand is dangerous . I have the scars to prove the validation of these safety videos.😊
Seems rather boring to me. I would think he was about to give an iphone review if he didnt have an angle grinder in his hands.
"My superpower is common sense."
- "Wow, that is a super rare superpower!"
As a retired shop teacher, it’s always nice to see someone who truly knows what they are talking about instructing others. Keep up the good work and don’t let the haters get you down, you are much appreciated!
I for one appreciate your tips, may save some fingers! Thank you!
Shop teacher? Didn't they disappear after the last ice age?
Ha! joking. In my 60's and valued every one I had in school.
The first video I have ever watched of yours was the "most dangerous tool in your shop" video and boy did I (we) need to hear it! I happen to have an old angle grinder that was given to me by a friend with no guard on it and you could no longer even change the blades (jammed up too tight) and it is old, no guard etc....but I kept using it with the remnants of the existing blade and even my wife took it upon herself to go use it with me being unaware! I told her about your video and we are so thankful for you telling us and that nothing happened before hand.. It is trash now, they are cheap so whatever.
You have a new subber here and we really appreciate you. Obviously you are a wise and level headed person with good intentions and lots of valuable experience. Your tolerance of chronic and persistent idiocy from others is impressive. Thank you again, you may have saved one of us from serious injury or.....?
Yours was the first woodworking channel I subscribed to. I wanted to use an 80 year old craftsman tablesaw, given to me by a neighbor, without losing a finger. Your safety videos are great and a public service. I will always be grateful that you and your channel were here when I began to learn woodworking.
I applaud you for calling out the morons who just have to nitpick (even incorrectly) over every little detail. Your videos have been a goldmine for any and all woodworkers and I, for one, will always be a big fan. Keep up the good work.
On the plus side, every moron commenting is feeding the CZcams algorithm and helping to promote the channel. Hopefully it exposes the channel to more viewers who can learn a lot from stumpy.
Your teaching has been an awesome experience for many. Don't let a few dispiriting comments matter. Your detailed information is greatly appreciated.
He's not letting anyone actually, the rarity of this video came from the fact that he's trying to teach even to those who try to do anything beside and before learning, like posting dumb comments without turning on their brains.
@@giorgiochiappini1931 he is trying...and you are assuming they have a brain to turn on. Some of the comments really make me wonder.
Absolutely a great video! My very first safety rule for any power tool I am using (which is usually chainsaws) is a line from a Dirty Harry Clint Eastwood movie, which says “a man has got to know his limitations”. The times I have been hurt are usually the times when I’m getting tired and should’ve stopped.
Hey James. Please don’t let the few butt heads get you down. I truly wish you would just silently delete their hate and not bring it up. We all owe you so very much. You are a great voice of reason, intelligence and wisdom beyond your years. I really do owe you for the great things I have learned. Please stop putting the microscopic number of chronic complainers who are not fit to shine your shoes a voice. Just ignore them and do what you do best. Teach with amazing clarity and thought. They don’t deserve a nod. Just be stumpy and keep up the fantastic work. We all love you man.
I started watching your videos after i almost completely lost my right thumb in a tablesaw accident.
It was just about one careless second. Thanks for all your good advice.
And please don't lose your humour. From now on i will always point my tablesaw to the ground.
Yes. And only use it when you are at least 15 feet away.
My wife's uncle just lost his thumb and 2 fingers to a table saw. It wasn't HIS accident, he got bumped on a worksite and his hand landed on a table saw with the blade guard removed. This is a great reason why the "I know what I'm doing" argument is lame too, the owner isn't the only one at risk from a modified tool.oh and for sure, always carry power tools at the low-ready, especially SDS assault drills!
You should aim for the sky.
Just yesterday I was setting up for a cut and I couldn't get it set in a way I thought was safe. Always think through the whole process. 2 things I learned. Band saws are easier than they look, and time to upgrade my old Ace Benchtop table saw to a less useless model. ps I did end up using it to cut some half lap joints.🎉
Never ever ever look down the barrel of any gun unless you are wearing safety glasses! Facts!
Stumpy, I am nearly 70 and watch videos like yours because I am not infallible and have probably forgotten too much. As you said, there are people who nit pick instead of shutting their mouths and taping their fingers together to stop the flow of bullshit exuding from their orifices. The day you stop learning, or being reminded of safety, is literally the day you have the nails driven into your coffin. Thank you mate and keep up with the videos. 835 thousand followers can't all be wrong.
Terry from Australia.
Well said
I’ve known people who were still learning new things in their 80s and others who at 30 had decided they already knew enough. Tome the second type were the walking dead.
@@janderson8401you’re never too old to learn.
I'm 74 and still learning. I'm not ashamed to admit it.
Only getting to see this 6 months after the fact! This has to be one of the funniest "serious" vids I've seen you put out James. Absolutely loved it and the poise with which you dealt with "negative" commentary! To the point, you got the messages of safety out there but in a great manner.. and then for me, well reading through the comments had me in stitches. We belong to eclectic quirky fraternity who are bound together by the love of makin stuff with our hands, sharing our experiences and really appreciate the learnings from men like yourself James. Thank you sir, you truly are appreciated! Regards, Mark (South Africa)
I sent your last video to my brother, an Emergency Room doctor. He said he has seen a lot of injuries from grinder accidents. Right up there with chain saw accidents! Thanks for putting out these must-know safety videos.
Just to warn you, you should never hold a grinder in your left hand when you are a Scorpio, the moon is in the waning phase, in the 10th month of the year of the Pig. This is a basic safety tip, I can't believe you don't know this. Never look into the barrel of your angle grinder. /s
If you do not look into the barrel of the grinder, how do you know if it needs to be cleaned? Just asking 😊. (Loved your comment)
This comment needs more love. Absolutely love how incredulous you went with this. Well played.
😂❤😘
You're such a silly person. But I love sharing this planet with folks like you.
You didn't mention what position your mouth and jaw should be in. Shame!
THANK YOU for being such a calm voice of good old fashioned reason. These "hacks" drive me crazy. I buy tools to do specific jobs. The right tool to do the right job, as my late father used to tell me. I don't modify tools to do things they weren't designed to do. I have worked in the medical fields for many years (initially as an EMT, then Paramedic, now an RN in a hospital). Everytime I thought I'd seen all of the 'stupid human tricks' anyone could possibly come up with, someone proves me wrong. Tools, especially power tools, are NOT toys. They ARE dangerous. You respect them, or they will hurt you.
5:20 HAHAH GOTTEM I spat out my drink when you revealed there was no battery LOL
The people who are always finding fault usually have too much time on their hands and too little movement in their brain! I have been watching and learning from you and your presentations for years. I would like to someday personally thank you for sharing your knowledge with all of us!
I must admit when I first looked at the grinder 'the wheel is on backwards" was the first thing that came into my head. I sold and serviced grinders and other power tools related tothe welding industry along with abrasives for a number of years (many years ago now). The majority of abrasive wheels we sold would have been depressed centre grinding and cutoff wheels...only one way to install them, and the labels were always on the back of the wheels. We did sell the flat cutoff wheels too but it was never suggested they could be mounted with the label facing outward. I like the idea of being able to confirm the type of wheel on the grinder though...thanks for sharing this video and the education. (It seems you CAN teach an old dog new tricks...lol.
On a personal note: the guard is a MUST...even if you are just turning on the grinder to make sure it is operating properly...my left index finger bears the scar to prove it (right to the bone with just a quick touch to the wheel...ouch!!).
The guard on my personal grinder saved me a lot of pain when a cutoff wheel got bound up and exploded...THAT was 'fun'.😨
Cheers from New Brunswick, Canada...eh. 🇨🇦
As an ER registrar, on the topic of having plans in place in case things go wrong (especially when using a particularly dangerous tool), have at least emergency contact and medical info written down. I know in college, the electrics shop I worked in had us fill out a sheet with all of that info in it, and I think I remember high school scene shop had us do a similar thing. Make it so that if today's the day that the circumstances of fate mean the dangerous (but usually managed) tools you're working with send you to the ER, your supervisor just has to grab your sheet of info to make sure that your spouse is called, that the nurses and docs know if you're on blood thinners or other meds, all that fun stuff.
I applaud your calm, reasonable demeaning while attempting to be the voice of reason. I love your content and thoroughly enjoy watching you. When I first started my millwright training my boss told me to always remember just one vital piece of information. He told me "never underestimate your equipment. It can only be made idiot proof when you have nobody using it." The best advice I ever got and I still remember it 50+ years later. Thank you for your content.
I'm a newbie, and I find your videos extremely informative and your delivery matter-of-fact and diplomatic.
You just can't make some people happy because their unhappiness comes from somewhere else.
Thanks for teaching me so much!
Well said Robin
Please keep doing your level-headed and educational videos. I've been woodworking about 50 years, and still learn from you. Don't let the turkeys get you down!
Thanks for this, Stumpy! Loved the video and the message. Keep up the great content, regardless of the negativity you receive. Most of us appreciate your well thought out, reasoned approach to improving our woodworking experience.
Very well dealt with! I despair of those critics who do their best to find fault, in almost all situations! Your presentation truly highlights their folly! Len (Devon 🇬🇧)
Stumpy, I found your videos about 9 months ago when I decided to do some woodworking at home. Your videos have been invaluable to me, I have watched and rewatched many of your safety videos. Please ignore the trolls, thousands and thousands of us really appreciate what you do.
I always enjoy a video from Stumpy Nubs (a.k.a James) & one of the main reasons for that is because he has such a great commentary voice and has such a safe, reasoning outlook towards everything in the workshop. Definitely one of the best woodworkers on CZcams!
Hey Stumpy Nubs, just letting you know I’m starting out in woodworking and I appreciate the safety advice from all over the channel.
I always consider you to be the professor when it comes to tools and woodworking. I've made a lot of decisions and ways I do things in the shop based on your keen knowledge. Thanks for doing these videos. For an amateur woodworker you've helped me out immensely. Keep up the good work!
I’ve appreciated every one of your safety-related videos. I try to be careful in my shop, and your safety videos are great reminders to me to STAY ALERT!
Terrific video. As a corporate trainer and a fledgling woodworker I appreciate your integrity and ability to connect and teach. I have learned a ton from this channel and hope to continue. Keep making this great and relevant content. Disregard the haters ... many of us appreciate your efforts to mold us into well informed and responsible hobbyists/professionals.
I love your videos and I think you are spot on. Keep doing it the way you’ve been doing it and have faith that there are thousands of us who appreciate you and what you are doing. I’m a retired engineer and I know from personal experience how important it is to keep safety fresh and in the forefront of my mind. I’m a wood worker, I do a lot of tree cutting, and I’m a motorcyclist. I know I cannot afford to not think about safety! And I know that it is as important now, and even more important now that I’m getting older (which is a point that you made). Thank you. I’m a fan! Mike
Teaching safety is paramount! Even if you saved one person a trip to the hospital that's huge. Keep up the good work !
I believe a very large percent of your subscribers and viewers understood your message about shop safety. Continue to be positive and putting out great content. Thanks for sharing.
Hey Stumpy, just to let you know, you are fine the way you are and the videos you do. You are not crazy. keep them coming. I look forward to your insight. An 64 year old pipefitter from Michigan. Peace. I love power tools !
You did a terrific job on the first and now this, the second video about the people that criticize you. I’m a fan. Keep it up.
Calm and cool video, really nice background! Most of the mouth breathers commenting in a negative way have no business handling any tool. These are the people that will get you hurt in a productive shop. Thanks for your efforts you put out some great stuff!!
First off, I just wanted to give you a big round of applause for how gracefully you handle criticism and ignorance. It's not an easy feat, and I truly admire your approach. Your videos have been an incredible source of information and help, and I can't thank you enough for that.
I did want to chime in with a little safety tip, especially since I work as an electrician. In our field, safety is paramount. We're trained to de-energize circuits whenever we work on them, and even when everything's powered down, we treat every wire and component as if it were live. It's all about that extra layer of caution, you know? So, when it comes to replacing or making changes to power tools, it's vital to exercise utmost care.
Keep up the fantastic work, and I'm looking forward to more of your insightful content!
James, watched the entire video before I commented (which was tough)... The Forest Gump line "stupid is as stupid does" was looping in my brain. There are many things that we can fix... but stupid is not one of them. James, you are a wonderful teacher--you keep doing that and hopefully someday that Forest Gump quote will be disproved. But, until that day comes please keep doing what you do so eloquently and succinctly--who knows it may even teach some embolden leprechaun behind a keyboard and screen something... please don't hold your breath on that tho. Be well and keep teaching!
i'm a little more wordy expressing the same thought:
ignorance is not knowing. you can learn. stupid is to be ignorant and refuse to learn.
I used to be very careless with my power tools.
Even removing the safety shield from every angle grinder I own.
Out of sheer dumb luck I have not been hurt.
I've been changing my reckless habits though.
You just bought to my attention the need to unplug tools before changing bits.
This is obvious to most people but since I've been so careless for years it is something I haven't thought of.
So thanks mate for making this video.
You've helped at least one person.
Hey Stumpy... I would like to add my vote of confidence to your work. Years ago I lost part of a finger to my Delta table saw. As I'm sure you have probably guessed, the table saw was without fault in this incident. Looking back, I knew I was doing something stupid, and should have stopped and figured out a safer way to make my cuts. Instead I had a trip to the ER followed by all the hospital bills which simply added insult to injury. I love watching your videos as they have great information as well as important tips on how I can hold onto the rest of my fingers . Please keep doing what you are doing. You are a great resource, and I have no doubt that you have saved a number of woodworker from making the same mistakes that I did.
Too many angry people out there. People who disagree are seen as the enemy nowdays so they justify rudeness and disrespect. Keep doing what you're doing bro. I have learned so much from your vids in the way of safety. If there are some who don't appreciate that, ignore them, period. Thanks for sharing your knowledge and experience for relatively new wood workers/turners like me! 👍🏾
Love the videos, Stumpy! These couple on angle grinders and related safety have been wonderful.
If I may pose an additional facet to the unplugged/unloaded point; I have been a long time shooter, been taught and trained by a wide variety of people, using a wide variety of weapons, and taught a wide variety of people how to shoot safely and effectively. With that comes the inevitability of making mistakes and having to unlearn wrong instruction and relearn poor instruction. The relevant point I’d like to bring to the conversation is that we are often taught “always treat a gun like it’s loaded” and the reason is usually given that sometimes you make a mistake and it may be loaded, making the gun unsafe to handle. I’ve since taken a different approach when teaching this point, which is: even if we KNOW beyond doubt, having multiple people do multiple checks and confirming that the weapon is unloaded; we still treat it like it is loaded to form and maintain that habit; so that it’s second nature and subconscious to do so, thus making the user a safer user. An unloaded gun is not dangerous after all, rather; the users are.
On a different point you mentioned; just as there are times that we must handle the cutting edge of our power tools there are many occasions where one must handle firearms or firearm parts in such a way that would otherwise be considered dangerous, such as; when assembling or disassembling, cleaning, or leaving a gun in storage. All these situations may necessitate “breaking the rules” such as the muzzle pointing at something you’re unwilling to destroy, but; this is why we have layered methods to performing these actions such that a large number of steps MUST be performed incorrectly for an accident to be able to occur, just like de-energizing your power tools before doing maintenance.
Apologies for the long winded comment. I hope this might help reinforce what you were saying; safety is a very important focus and, yes; every rule is written in someone’s blood. Let’s learn from them and not add our own to the record! 🩸
Great vid! I've literally been dealing with the same nit picking trolls lately. I feel really sorry for them. They have nothing better to do with themselves. And they will never admit when they are wrong. Just block them. No need it.
Thanks for the good and reasonable advice about tool safety. Over the years, I have learned how important it is to periodically review safety rules and also review my own behaviors. I know I need to do this to prevent myself from becoming careless and falling into bad habits or to correct that bad behavior when needed. Unfortunately, it took a few years and some injuries before I took this to heart.
As always, thank you for your insight and patience with the folks out there who just have to sound off. I am a Paramedic of many years experience and a woodworker of somewhat fewer years. I listen to all of your safety advice, as I have seen in my professional practice the terrible things that tools can do when misused or misunderstood. It only takes a moment of lost attention to generate lost digits - or worse. It has been my medical experience that those whom I transport to hospital for tool-related injuries are almost never novices. It is always those of us with experience who are thinking two steps down the road in our project and forget to be safe in the moment. Please continue to remind us about shop safety. It is a reminder that all of us who love this craft can never hear often enough.
You are one of my go-to instructors when I am wondering about how to use cetain tools, and work out how to build something. I had NO idea how dangerous using a table saw without a push stick could be. Now when I see CZcamsrs cutting without a push stick I cringe. Thank you so much for your voice of reason, professionalism and good sense of humor. And Haters gonna hate, UGH!
7:02 When a blade or bit dulls I throw the entire power tool away. You can never be too safe!
Dude! That was masterful! Seriously! Not only did you not allow yourself to be dragged down but you were still supportive to the angry knuckleheads. Do you have kids? Well, you are the kind of person who should.
After many years working with metal and being hopeless with the woody stuff, I have recently taken up woodwork in retirement. Your videos and Mr Sellers' videos are my main sources for instruction of safe handling/sharpening , and technique of this strange substance timber. Please keep making your excellent videos; they are a joy to watch and listen to.
Hey man. There is a huge amount of us who listen to you, in awe, because we think that you are an amazing teacher, engaging and clear in your explanations. We often fail to tell haters "just shut up", just out of boredom, and because it takes time. But please believe, your supporters are, well, just supporting you. At least in our souls.
Kind regards, and please keep up with your fantastic work. And thank you.
As a welding instructor, I was glad someone (you) addressed these dangers. Tools must be used as intended!! I can recall many close calls students have recited from welding shops all over Alberta.
Grinders are safe if used as intended but can be (and are) deadly if misused.
I'm a novice wood worker and have learned so much from your channel. My confidence grows each time I learn has to stay safer in the shop. Thank you so much!
Forgot to comment on that video. I was using a cupped and knotted wire brush on the end of some tubing. That thing kicked like a mule, spun up in the air 4 foot.
Your video was very well produced and is much needed!!
Thank you Stumpy for not giving up in frustration, we all learn so much from you. Keep up the good work and keep sharpening that wit of yours like one of your chisels. We all know how hard it is to cut through stubborn and stupid, but you do it with ease.
I used to have an angle grinder that squirted water. It had a garden hose attachment and sprayed a stream of water for use in conjunction with diamond impregnated grinding/polishing discs for concrete. The water carried away the resulting debris in a slurry. The tool was from China and had a very questionable GFCI cord attached to it. I used it with a separate GFCI outlet because I didnt trust the one that came with it. While using the tool, you could feel light electric shocks on wet skin. There wasn't so much of a kickback danger, and the disks were ran at relatively low speed. But I'm sure you would still tear it up on safety concerns.
Always appreciate your great experiences with not only hand tools, but with power tools also and caring enough to share with us your ups and your downs. It's great to learn from others and that's what this community is all about. Thank you! Have a great safe working day.
For one I find your safety videos very helpful. Keep up the good work and keep making safety videos and tips regardless of what some may same. Thank You for your efforts to save our fingers and eyes!
Great response video. We all make mistakes in the shop, driving and it the home. Perfect we are not. But we can all strive to be more careful in everything we do. Thanks for being a voice of reason.
I think your material is excellent, well balanced and does not patronise your viewers. It amazes me that people should be so offended by it. Keep up the good work. Thank you
THIS is the video that just got you a new subscriber.
Good tips + common sense + calling out self-righteous idiots (y'all know who you are) == new subscribers
Amen brother, and my thanks for all of your safety videos. Your comment in a table saw safety video resonates with me to this day, to paraphrase 'if you think what you're about to do is sketchy, step back and rethink it'. I have made this my wood working gospel with all power tools. It never hurts to 'think' first.
Yipp..in Engineering design we always say it's less costly to correct the error on a piece of paper first than afterwards in hindesight when it's already built & failed..❗🤦♂️
I want to add my thanks to all of the others here for enduring the criticism to keep others safe. I’m a better woodworker but more importantly I’m safer from watching years if your videos. Cheers to you Stumpy!
I have watched loads of videos about power tools and you sir are, by a country mill, the calmest, easy to listen to, knowledgeable and instructional presenter on CZcams.......in my opinion. Keep at it. Take care, stay safe.
Best advise I got on angle grinder safety: leave it in the box, and use another tool if you can 😄 It scares me worse than the table saw or router (or the gun for that matter)
You're not wrong, mine is still new in the box. Bought it, started looking into how to use it, and haven't touched it in 10 years.
I would disagree, I’ve used a grinder for ~40 years and am more comfortable with it than the table saw some of the time. To each their own but don’t fault you for not using it if you’re scared of it. Have a good day!
I had to take the time to comment on this one. Hilarious video. My hat is off to you and all you tubers who must put up with morainic comments . Thank you to you and the other hard working people giving us a plethora of information on all kinds of topics. I must believe that the majority of people watching are of sane minds and appreciate your passion and experience to help us make more saw dust.
This is probably the most sane, rational, and thought provoking safety video I've seen. And I learned something (without the blood resulting from driving the point home) that maybe there are things I can't just assume. Obviously things like circular saw blades have an orientation. But are there angle grinder discs that can be installed backwards, and do not have a big arrow saying this side up or such. I don't always look for the warnings, as I assumed the nanny state has required features as on your Makita. Thanks for providing a straightforward and non-threatening presentation.
Been a fan for years. First of all, I wish I could handle criticism and negativity with such bulletproof grace. Second, kudos to you for teaching safety. 👏👏👏 No one should *ever* bash someone for teaching about the safety and reality of dangerous power tools. People take their life and wellbeing for granted. It only takes one human mistake to cause a serious, life changing accident.
I for one have a little more respect for my angle grinder after watching your videos. You're right; these things spin at dangerously high RPMs.
This is one of your most entertaining videos in a while! Love your dry sense of humor!
This is the stupidest video ever, meant in the sense that it's stupid that it is necessary to make it at all. 😉
Thank you for all of your videos through the years. I watch a ton of CZcams videos on a wide range of subjects and almost never read the comments precisely because of the kinds of responses that drove you to make this video. It’s a shame that you and others providing responsible tutorial content, feel they have to put so much time and effort into responding to the few “out there” who apparently derive their sense of satisfaction and worth by reacting with thoughtless/baseless negativity to whatever strikes them at first blush to be wrong. It’s always better to give the benefit of the doubt first, ask politely if there is an explanation for what we ‘think’ we saw or heard. They may be right - okay - engage in constructive dialogue to make things right, or if your wrong get the dispassionate explanation (not you Stumpy - I’m talking about the irresponsibly negative commenters out there).
In any case, it is never appropriate to be rude or insulting. Doing so only demonstrates to the world our own ignorance, intolerance, lack of self control, and certainly that we have no inclination or desire to dialogue in search of truth. Such people who lurk on these sites to live out their negativity are so sad to observe. I hope at some point they can spend at least a fraction of the time they invest in tearing down others, to contemplate honestly their own inner issues and motivations. As Socrates famously said, “The unexamined life is not worth living.”
Chill out everyone!
Thanks for another great video. I've watched your videos for years and consider you a true champion of safety. I would never believe you are handling an energized tool. Those nitpickers need to get a life.
Makes me wonder if these folks making idiodic comments should come with warning labels. Thank you for being a voice of reason.
Excellent presentation and thank you for all the tips over the years, we are all much better off having watched your videos and taken heed of the many many nuggets.. appreciate it more that you imagine!
I guess I'm just one of those guys who recognizes your expertise and enjoys learning from you. Your videos have made me a safer user of power tools, and I appreciate the education.
I have been watching your videos for quite a while. I was basically raised in a wood shop with both my grandfather and father being terrific craftsmen. I continued by taking multiple shop classes to sharpen my skills and learn from others. Your videos are very informative, and, like others have stated, calming and pleasing to the ears. Unfortunately, in this world of the internet, there are "asshats" who always are miserable and must degrade others in order to make themselves feel better. It goes without saying that they should be ignored. Keep up the great work.
Mr. Stumpy nubs I just watched your video and I want you to know that I admire your woodworking knowledge and also how you handled the negative comments regarding this video. I want to wish you continued success and encouragement, ignore the negative and keep on doing what you do best. Kind regards and an inmense respect for your craftsmanship.
I'm new to creating, the negativity..wow. but everyone has an opinion. But then looking at the haters profiles, most have never upload anything, made anything, edited anything.. keep up the good videos👍👍👍
CZcams activity is hopefully not the full picture of someone's life
Love your videos. You are #1 on my woodwork list. First time I am commenting and I admire your patience dealing with these characters. Something I learned recently in life and that's "ENVY" sad but true. I usually do not make comments because of same negativity. I loose it really bad, so I am taking a chance here.
Again, LOVE your videos, I learn alot as a woodworker and looking foward for more.
Great video. I think that the majority of us who create content for CZcams have experienced those crazy, and often hateful comments. 🤪 It's a sad reflection of human nature.
I have to admit Stumpy, I am one of those that looks your video’s over with a fine toothed comb to see what’s wrong or what I am missing. Not because I wanna nitpick you. But thank you for making my point about distractions. And I will admit yes I have screwed up at times with power tools, it’s how I have ruined a few of my favorite skirts, but I have never hurt myself thankfully. Now the reason I comb over your videos the way I do, is so I understand exactly what you are saying and the message you are conveying. Like how I keep the key to my angle grinder on the end of the cord, so I know to unplug it before swapping blades.
Good video, you handled things in a very calm and deliberate way. Although at right around 8:10… when you were handling the cutting blade i was half expecting the old Stumpy Nubs to come out, with the angle grinder suddenly turning on in a halloween blood fest. Oh well. Keep the safety videos coming. Some of us do pay attention.