#mrcool5ton
Vložit
- čas přidán 25. 08. 2024
- Mr cool universal 5 ton 4 ton installation,very quiet unit , variable speed
I care air repair call us today 972-642-9554
Any questions on mr cool equipment let us know
We are located in dallas texas and service the whole metroplex .
Amazon link filter dryer: amzn.to/3d21lRU
Amazon Heat Absorbing Material, Gel, 1 qt. link: amzn.to/3njYrgj
Amazon Uniweld NV1 NitroVue Nitrogen Flow Indicator link :amzn.to/30Er9i9
Amazon Turbotorch, 0386-0835, Brazing And Soldering Kit link :amzn.to/30C3hMi
Amazon LIMICAR Electric Hoist 440LBS Overhead Lift Electric Hoist Crane link:amzn.to/30CW9PB
Amazon HONG 111 Ratchet Kayak and Canoe Bow and Stern Tie Downs Straps 1/4 link:amzn.to/3jD3JkA
Amazon LUCAS MILHAUPT SIL-FOS 15% Part #95177 Silver Solder 7 Sticks link:amzn.to/3llr4HV
Amazon Supply plenum Winchester WKDP20 Universal Plenum,galvanized steel link:amzn.to/36CKDHU
Amazon Return plenum Flow Right 17" Galvanized Return Air Filter Box link:amzn.to/3niESVv
Amazon Google T3007ES Nest Learning Thermostat 3rd Generation, Stainless Steel link:amzn.to/3lls0vV
5 Ton 17 SEER MRCOOL Universal Series Heat Pump System link:i-care-air-rep...
MRCOOL
SERIES
Universal Series 4 / 5 Ton Condenser
MODEL
MDUO1848
GTIN
00810512032938
UPC
810512032938
UNIT TYPE
Universal Series Heat Pump
LONG DESCRIPTION
MRCOOL would like to introduce you to the future of HVAC with its new 17 SEER Ultra-Heat Inverter Unitary Condensing Unit and Air Handler. This unit provides superb comfort while running at an extremely quiet dB, rapid cooling and heating, and maximum savings while running on end. Don't be stuck in the past with your traditional system, think ahead with MRCOOL.
Up to 18 SEER
Ultra Wide Operating Temperature Range
Gas Furnace Not Required
Two models 36K/60K, heat pump, to cover 24K-60K capacity range
Slim design allows more storage for warehouse inventory
Compatible with any third party air handler and thermostat including WiFi/Nest
Ideal for zero lot line homes, strict sound restriction, conventional installations, and unit replacements
Rapid cooling and heating
Internal Fan Blade Creates Low Noise
Maximum savings while running
Factory Charged
ETL and AHRI certified
SEER
up to 18
MAX SEER
18
EER
11
HSPF
10.5
CFM
824-1911
TONNAGE
4_5 Ton
COOLING CAPACITY
20000-54000
HEATING CAPACITY
20000-54000
VOLTAGE
208/230
MRCOOL
SERIES
Universal Series 4 / 5 Ton Condenser
MODEL
MDUO1860
GTIN
00810512032938
UPC
810512032938
UNIT TYPE
Universal Series Heat Pump
SHORT DESCRIPTION
4-5 ton up to 17 SEER Universal Series Condenser
LONG DESCRIPTION
MRCOOL would like to introduce you to the future of HVAC with its new 17 SEER Ultra-Heat Inverter Unitary Condensing Unit and Air Handler. This unit provides superb comfort while running at an extremely quiet dB, rapid cooling and heating, and maximum savings while running on end. Don't be stuck in the past with your traditional system, think ahead with MRCOOL.
Up to 17 SEER
I have this exact ac it sucks broke 3 times.
And good luck with the warranty department giving you any china parts
Can you show detail on how you vacuumed and charged the unit? I got the 2/3 ton unit and going to use my own lineset and in know the air handler is precharged but it's not clear if you need to open the Allen wrench valves on the condenser when vacuuming. I also will add a bidirectional filter drier near the air handler.
If using your own lines, you'll need to keep the liquid/gas valves closed on both the condenser and the evaporator, and work each line (liquid/gas) separately... flow nitrogen then braze, then nitrogen pressure test, pull vacuum, release refrigerant on only that line (open valve at each end of that line, but not both), then repeat on the other line. The majority of the refrigerant is in the condenser... do not vacuum the condenser nor the evaporator! Just the lineset. Make sense?
@@hedge605 Make sense! I appreciate your help. I have all the equipment, tools and supplies and waiting for the winter to end so I can replace the furnace without having issues come up and have no heat. Look forward to having AC too now in the summer.
do you have to use the filter drier on the 4- 5 ton ? if so where do you get one, and do you have to solder it on?
I'm having the same issue as John, I have the communication wire between the outdoor unit and indoor unit installed but when I take readings before connecting the thermostat wire it shows 240 volts which is too high since the thermostat and the thermostat wire can only take 24 volts. So pictures or a video of the wiring would be greatly appreciated. FYI each unit has its own independent and disconnects, also my whole system is fully installed. Just need to connect the thermostat.
Hi Ismael do you have any pictures of the inside connections and the outside connections , email it to me at icareairrepair@gmail.com
Hi if you have any questions or comments please let us know
I’m interested in getting 2 of these systems to replace my 2 21 year old units - do you do service in Frisco?
I am planning an install for a Mr Cool 4-5 ton Universal unit and I am curious how much condensation are you getting from the outdoor unit? I am planning on moving the location of the outside compressor unit to an upstairs balcony but I am concerned the condensation my be too great to control and divert off that deck surface? Thanks for any help.
The outdoor unit only condensate when running as heatpump , it will not condensate a lot , it also has a drain that you can connect a hose and drain it to another location. Hope this answer your question
How hard was it for you to move it around? It seems like it might be heavy.
Yes it is heavy but with the help of the dolly and another person it was ok
How is the unit functioning in heat and cool ? How loud is the indoor unit?
Hi thanks for the question the indoor unit is very quiet also I don't have a video of it running but is quiet trust me, the unit cools and heats perfect my costumer loves it !
I will take some more footage of the unit and make another video,
Mr.
We are mr cool dealer if you need one let me know you can buy from us .
.
@@hugh3rdof5 Hi if you have any questions on the unit let me know you can email me at icareairrepair@gmail.com
Sorry for the low quality video but IAM not very good at video editing you also can call me if you have any questions to 972-642-9554 ask for Miguel.
Pretty sure their mini split units do not spec a filter drier did this model?
This is not a minisplit is a variable speed unit and it does need a filter drier also it has to be a bidirectional filter drier because is a heat pump.
@@icareairrepairhvacdallas5410 I see yes yes you're right
From what I've looked through on MrCool's website this one doesn't call for a filter drier either. Maybe experience says different but if the manufacturer doesn't call for it does it really need it?
@@chrisfoxwell4128 hi for sure it need a filter dryer if you weld the pipes , if you give me your email I can send you the installation manual so you can see it from me cool web site
I tried calling your phone number and it wasn't working. Do you have a new number? I would Iike to get one of these installed.
We are installing the same unit, however, the instructions from the outdoor unit to the indoor unit and from the indoor unit to the thermostat are confusing! Any photos of the wiring inside of the unit?
Did you finished the install, do you still need the thermostat wires?
Are you using sil fos brazing rod?
Yes we use silfos 15 % on the braze of the unit.
@@icareairrepairhvacdallas5410 thanks 👍
Where are you located ?
Can you install in California ?
We are located in Dallas tx we don't have any installer in California sorry. Thanks for watching. Any ways if you have any questions let me know , there is some pre charged copper lines you can buy and you won't need to braze the copper.
@@icareairrepairhvacdallas5410 Thanks
Surprised to see brazing on a mini split type system. Usually it's a no go with most brands even with nitrogen.
This is not a minisplit system, it is a 5 ton Heat Pump with variable speed and a variable speed air handler.
I thought there was no soldering needed…
You can buy the no soldering lines if you are a diy person , we had all the equipment to do it with regular copper lines so we did it that way
You dont need to use there flare adapters. Just use a flare tool one solid line no soldering or brazing, clean