Arc-Fault, Ground-Fault, and Dual-Function Circuit Breakers Explained
Vložit
- čas přidán 20. 06. 2024
- Every electrician should have a complete understanding of Arc-Fault and Ground-Fault protection, not only for safety, but also to call themselves an educated professional. Here are the facts!
SPONSOR: Shneider Electric
homedepot.sjv.io/c/1242781/97... [homedepot.sjv.io]
🤘⚡️MEMBERSHIP⚡️🤘
JOIN ELECTRICIAN U - become a member and get:
FREE Continuing Education every year
FREE Practice Exams
FREE Monthly Video Courses
FREE Monthly Educational News Letter
Premium Members-Only Content
Private Discord Channel
Monthly Members-Only Discord Chats
Sign up here --- www.electricianu.com/
✍️👨🎓LIVE CLASSES👨🎓✍️
www.electricianu.com/live-onl...
👾🤖PRACTICE EXAMS🤖👾
electricianu.com/electrician-...
😎👕MERCH👕😎
electricianu.com/eu-merch/
📲👥SOCIALS👥📲
Instagram - / electrician_u
Discord - / discord
Facebook Page - / theelectricianu
Facebook Group - bit.ly/2tz7eQh
TikTok - www.tiktok.com/?electricianu
Reddit- / electricianu
Twitter - / electrician_u
LinkedIn - / electricianu
🎧🎹MUSIC AND VIDEO:🎹🎧
/ descantmv
🎬✍️ART AND ILLUSTRATION:✍️🎬
www.daverussoart.com
OTHER PRODUCTS USED IN VIDEO:
Arc-flash face shield: amzn.to/3bJFRLd
Hot gloves: amzn.to/39HnzYa
NEC Codebook 2020: amzn.to/3972SGl
There’s no doubt that if you’re in the electrical field, you’ve heard the phrases “arc fault”, “dual function”, and “GFI” a few times and been a bit confused about what the differences are, or if it even matters. Well my friends, this week we lay all questions and uncertainties to rest once and for all.
AFCI/GFCI/DF
Arc Fault detection is a semi-recent requirement of the NEC but a vital one, as a large majority of house fires are caused by faulty wiring and the resulting arc faults. These arcs have been measured at 10,000 degrees Fahrenheit or more, easily setting fire to material nearby like wooden studs or insulation, making arc fault protection a necessity in every home. Arc Fault Circuit Interrupters “AFCIs” use computing technology to detect and protect an electrical circuit from unwanted arcing by monitoring current closely and disconnecting when irregularities occur. A combination AFCI or “CAFI” is a device that detects both parallel (hot to neutral, hot to ground, and neutral to ground) and series arcs (arcing between a single line caused by a loose connection or damaged conductor). You're bound to find more CAFI breakers at stores and in the fields because the NEC no longer accepts non-combination AFCI breakers as proper arc fault protection in dwelling units without other supplemental AF protection devices.
Ground fault circuit interrupters or “GFIs” are installed to protect from electrical shock by constantly measuring current from hot to neutral. When the device detects an imbalance signaling that current is flowing through a different conductor than neutral (like water, stone, or a human), it trips in milliseconds. An older study found that 47% of annual electrocutions could have been prevented by proper GFCI protection in and around the home, a staggering percentage. With the update of technology, GFCIs aren't just clunky plugs in your kitchen anymore, nowadays it's just as common to see them in a breaker panel.
Dual Function breakers or “DFs” are specific breakers that function as both CAFIs and GFIs. This hard working breaker cuts down on the bulk of material needed for locations that require both types of protection, and is essential for locations that could make it hard or impossible to push the reset button of a GFI.
Locations and NEC Code articles
Arc Fault protection has its very own section (210.12) of the NEC under Branch Circuits that specifies the exact locations and conditions protection is needed. To summarize the article, Combination AF protection is required in any and all habitable spaces of dwelling facilities which includes, but is not limited to, kitchens, bedrooms, hallways, living/dining rooms and utility rooms. This applies not only to residential homes but also the dwelling areas in hotels/motels, dormitories, and nursing homes. Make sure to read the full article if you are unsure whether a circuit should be protected or not.
GFCI protection for personnel (the far more common use) can be found in the NEC under Branch Circuits in 210.8 and again in 210.13 for equipment over 1000A. To protect against electrical shock, ground fault protection devices are required in dwelling units wherever a receptacle circuit might be introduced to water including but not limited to kitchen countertops, within 6ft of sinks or showers, laundry rooms, garages/storage rooms below grade, and outdoor circuits.
#Groundfault #Breakers #Arcfault
Good explanation! I’ve been an electrician for 24 years now, I’ve co-owned a small electrical installation company since 2015. We’ve always installed Square D panels in our commercial and residential applications. We’ve been using the Square D Homeline for residential, and installing the plug on neutral DFCI breakers for a good while now. We RARELY have problems with those breakers failing. We discovered a long time ago that you actually get LESS nuisance tripping with a DF verses an AF, which is crazy to me at first because you would think it would trip more. These DF breakers seem to be a little more tolerant than an AFCI breaker. The only circuits we don’t DF is the garage and bathroom plugs. The reason for that is during construction it gives people plugs for saws and compressors that the DF breakers don’t like, which seems to be the only issue we have with these. On those circuits we just install a standard breaker and a GFCI plug. Keep up the good work, it’s cool to see a younger person like yourself that seems to have the love for this trade and putting good information out to those of us that want to be better, more knowledgeable, and more efficient at our jobs than we were yesterday.
good to know. Thanks
Nice job
Dude the graphics and sounds effects add a whole new level to your vids. Well done.
Your actually one of the best teachers on electrical systems I've seen so far, you explain it so easy to understand. Thanks
This is one of those rare training pieces that every single apprentice should watch. Ours will. Thanks again for an outstanding production!
This was an excellent video very well communicated by the electrician, there are many electricians that do not understand this protection.
Great video Dustin. I am a retired electrician for twenty years from the SF area. I appreciate your knowledge and delivery of all your classes. I wish someone would have had your skills to teach my apprentices this valuable new information. Continue your gift of teaching and hope many will listen to what you are throwing out there.
LOL....at 5:39 Dustin gave everyone the "Finger"....LOL....Always remember that a standard OCPD, such as a circuit breaker does handle (3) Overcurrent Conditions. They are 1) Overload, 2) Short-Circuit, and 3) Ground-Fault. Remember, GFCI Devices do not function at 4 mA or less and do function at 6 mA and greater per their UL 943 standard. We use the 5 mA as the bridge point as there are some tolerances in the devices that do take place. Great job Dustin. Keep up the great work.
This kid is articulately concise and extremely accurate to the point! Great job kid!
This is awesome! I’ve been a electrical contractor for well over 20yr’s and know most of this but just don’t have the time to keep up and have a complete understanding of all these new requirements. You are a great short cut to educate my self with some of these new requirements and devices that we’ve been installing for years but just didn’t grasp the functionality. Thank you for the show there’s always time to learn more, unless you’re working all the time!!!
Your videos are awesome, Dustin. You're a huge inspiration for me to become an electrician, and I just passed my apprenticeship phase! Rock on!
I am starting my apprenticeship this year but this is also my passion and I just want to thank you for everything you have taught me in all these videos and just want to let you know you are inspiring people and making people feel awesome and super proud to be an electrician. thanks man.
IBEW
@@nrg_fre local 11!
Jake, what state is your Electrician Apprenticeship starting, as we have a Grandson interested in great Trade?
I've been in the trade for 20yrs and I love that I can still learn everyday. I don't do a whole lot of regular electrician work any more as I'm more into medium and high voltage work but I still do enough side jobs that it's helpful to fully understand the science behind the trade. Thanks for the vid....
Man, this is SUPER helpful. Instant subscribe. I started electrical trade school 4 months ago and just this video has made a few things so much more clear! I think it also helps that you're a younger guy lol my teachers are pretty old, so sometimes they mumble and jumble their way through a lesson. THANK YOU for being so clear and concise. Keep up that energy!
As others have said I enjoy the animations and graphics that help drive home the point. Also your explanations without going too heavy on NEC terminology and personality keep me watching and learning from your videos ! Thanks!
Hell yes!! Man ever since your channel went dark there has been a content sized hole, glad to have you back brother hope all is well!
Great video. I started as a helper in 1972. Back then 3 prong outlets were the new thing. We have come a long way. I got fried a few times because someone cut the ground prong off cords to fit the old outlets and have seen and repaired some deadly installations. Got 3rd degree burns from 120 v arc flash from an outdoor light with water in the socket. I also worked an industrial job with overloaded panels. The room blew up and blew the steel door and block wall down. Nobody was there at the time, we were out about 2 hrs when it blew.
Thank you so much. You’ve spent sooo much time on making these videos. You help me make more money for my family and for that I can’t thank you enough.
I had very little understanding of electricity and this taught me a lot, thanks for great content!
Knowledge is power! I enjoy watching and learning from your videos; they bring a lot of common sense to the convoluted NEC. Thanks Dustin!
Also....5:40 giving us all the double bird. Legend.
Great video, I love your enthusiasm and knowledge. Way to give a hand up to the next generation of electricians. I have been an electrician since 1978. And I am still learning all the time. Our trade is ever evolving. Thank you for what you do.⚡
I like seeing an experienced electrician post a positive comment like this to someone who earned the respect. Thanks!
Dustin, PLEASE make a video on Megger testing insulation. c'mon man, please!
Like so he might see this...
When my company purchased a great Fluke combination VOM & 50 TO 1,000 Volt megger a few years back I sent away for a Fluke maybe 24 to 36 page megger book. Started out 50 years ago with a Bittle hand crank megger. Here are a few tips: to test a motor the shaft must not be turning not even 1/4RPM or reading will be jumping all over the place and not be accurate. Test voltage should be twice the voltage + 100 volts. So you need a 1,000 volt megger to test a 480 volt motor. For motors on VFD drives some compamies state that reading must be at least 10 megohms to ground. I perfer 20 megohms due to some drives tripping out on ground fault at 15 megohms. Never touch motor leads for a few mintues or you will recieve a nice shock. To check if a motor if grounded you must disconnect all line leads off motor leads at the pecker head. I saw lazy electricians skip this & only meggered at starter. Replaced motor and it still took out fuses due to wires were grounded. I have an expensive Simpson megger, DC Volt & ohmeter that puts out up to 5,000 volts that I used to test 4 ,160 volt motors. Ya should use a 10,000 volt megger but cost too much. Safety tip from an old fart & Nam vet: NEVER EVER purchase or use ANY test or safety equipment, tools or LED'S from lying cheating lack of quality control scum bag communist china. Not worth saving a few bucks to put your life out on slippery limb. Had crap china meter leads break within 3 months of buying. Had china LED'S driver catch on fire and china replacement smoking after only a few months. Got a made in good old USA driver and has been working great over 5 years. Glad to say that I only own 1 cheating china tool that is a replacement for a 50 year old Crafstman breaker bar. I have 2 other breaker bars so doubt if I will ever use that one. Have some German wrenches ans Swiss made precison screedrivers. Everything else was made in USA by tax paying AMERICANS.
Dustin, you are a teacher who has met our need and then some. Godspeed to you and your family.
Great videos. I work in the oil and gas industry, but much of this info is still helpful wiring and understanding control buildings and equipment. These videos are not boring, like some of the stuff out there, that will put a baby to sleep ... taught by someone who is out of touch with the field. 🇨🇱👍
I really enjoy this channel I’m a apprentice working my way to a wire man and this helps me a lot at work 💪🏼🙋🏻♂️ ‘ thanks a lot ...for you time
You are one Proton Pack away from having the most awesome background ever.
Dude, really appreciate these videos and this channel. I've always had an interest in electrical but most importantly much respect for it as well. The parents are building a house and going through some planning so I'm refreshing and learning more from your channel. I am not the sharpest tool but you're videos explain it well enough for a guy like me. I'm also in Austin so when I caught you were too, made it even cooooooler!
11:36 love the Johnny 5 short circuit reference.
“Hey laser lips, your momma was a snowblower..”. “No disassemble”
Great video, thank you for sharing, keep safe
Superb instruction. Thanks so much! I don't subscribe to anything on youtube, but I am subscribing to your channel! Can't thank you enough for your excellent explanations, clear, and thorough and easy to understand. You have a gift for teaching that most people lack.
Best description of an electrical system that I’ve ever seen!
thank you Dustin this answered my question for my house in the philippines 👍👍👍👌
Again you have explained how a breaker works very well! No one has ever said it like you did. Thanks!!!
Love the special effects ! this month is the first time i seen a plug neutral load center.
Thanks for posting the informative but entertaining video. Thanks for keeping us safer.
I bought this up to a Square D sales engineer and several inspectors. Now with AFCI required on just about every residental circuit how do they expect a neat job bundling wires where you have say 30 AFCI breakers in a panel that does not have plug in neutrals. So now you have 120 wires in a 14.5" wide panel with the long AFCI breakers taking up probsbly 25% more room then a non AFCI breaker. In my own 40 circuit panel I used a lot of sticky back ty rab bases along with probsbly 40 tie rabs to do what code says workmenship matter. Think they should make 16 or 18" wide panels.
Couple of honest questions: 1. I have seen some tests where guys have taken under the protection of an arc fault breaker and went to an outlet or switch and created an arc by repeatedly touching the conductor to the terminal screw creating an arc with the breaker failing to trip, am I missing something? 2. With the price of arc fault being so close to DF breakers, should one consider going with all DF breakers or is there a disadvantage of having a ground fault where one isn't necessary, other than sometimes a pesky trip. Thanks in advance! Love your channel man!
Around 18 minutes where you were talking about laundry rooms and mentioned the 15-20amp and 120volt, is this affected by the 2020nec changes that increased the requirements to anything that is 150volts or less to ground making the dryer require it also? I know the last one I did I had to but we moved their laundry room to the bathroom and made a combo room so not sure if that's why it was required by that change or if it's all laundry rooms
I am not an electrician but I work for an electrician and this video was hugely helpful for me! Thanks so much for sharing!
I agree. I work for a company that deals with switchboards and whenever I have a question I look for you to explain and I will be joining you club
Super informative! Loved the information density here.
I just wired my new house with plug-on neutral breakers (HOM from Square D) and it's a pleasure. You can get a very neat panel.
I didn't really understand where to put what exactly so I ended up over protecting my circuits putting Dual Function everywhere that could be wet (2 countertop circuits, bathroom, crawlspace, septic, exterior outlets) and AFCI everywhere else. I could have probably got away with less but I didn't want to research for days to save a few bucks.
Plug in is the way to go, I believe all manufacturers now offer except for GE
Extremely helpful. I'm going to be replacing a few breakers with dual function, it spooks me that there's no safety for any events on most circuits in this house, including the laundry room.
Doing some wiring at my house…a few outlets and changing out a few lighting fixtures. Thank you for sharing your expertise! You’re very knowledgeable, and I subscribed 😊
Thanks for watching and thanks for the sub!
Great video, very clear!
Another issue with e.g. a series arc, is the heat makes plastic (insulation or other) melt, and metal oxidize. So the resistance increases and the heating increases.
12:20 not quite; what the GFCI detects is the difference between the hot and neutral currents, that part is right; however it's far more likely that a person touching the hot wire will get more than 5mA through them (hot to ground, 120V) than them touching the neutral (neutral to ground, might be a few volts if the circuit is heavily loaded). Assuming that the other thing they are connected to is ground.
Would also detect them bridging between two circuits, say hot #1 and neutral #2.
14:54 guessing the code doesn't know what people will plug into a receptacle, could be anything, including a toaster with all those exposed hot wires; the sink provides a low-impedance, wet ground connection. So if you have GFCI protection on the receptacles, they can't shock themselves by touching something with one hand while the other hand is in the sink.
Wonderful graphics. Thank you.
Great video man! I did a little addition on my house, bedroom, bathroom and laundry room I'm guessing I can use dual function breakers for everything lights/receptacles that way everything will be covered is that correct?
Excellent!! I knew about Arc, GFCI and Dual breakers for sometime but was not 100% sure of their function. I replaced a breaker box in our log cabin and decided to make them all Dual. As you say better to be overprotected than under-protected.
Actually I said all, there was one breaker that is a two pole (for the mini split) but I couldn't find a Dual for it. Is there a reason for that?
So glad you emphasize how lethal electricity can be. My experience is that people tend to be more fearful of plumbing issues i.e. water, than electrical issues. With water you just get wet, with electricity your life is in your hand😀😀
Hey Dustin, great video. I am a journeyman in western Oregon and tested out in 98. I do not wire a lot of homes but from time to time find myself in one and every time it seems like the use of arc fault just keeps growing. I understand the technology behind the GFCI but am still a little fuzzy on how AFCI detects arcs. I probably should know this but have not devoted much time to it. Appreciate any comments.
Arc faults are detected using micro-controllers that look for specific voltage-current patterns. A series arc will not flow current until near the peak of the voltage cycle, then drop off after the arc forms. It's tricky because switch mode power supplies that are everywhere now also only draw current near the top of the voltage cycle. But each create a different pattern of distortion.
I like your shows because you do a good job explaining the whole situation thanks for your knowledge
Excellent topic, very informative and educational. Preferred the GFCI/ AFCI device embedded in cb housing. Reason, for device curiosity tinkers: safety first, voltage is still present on old type GFCI receptacle line side terminal.
Brilliant presentation. Your explanation of the principles of operation and functions of these devices is a great addition to our knowledge base.
Have you encountered any failures of either combination devices or stand alone AFCI devices when used on circuits with fractional horsepower motors (refrigerators, dishwashers, garbage disposals, etc.)?
If so, what was your solution?
We appreciate your generosity of knowledge.
I had learned a lots with your wise videos man I really appreciated keep up the good work stay safe..
Great exploring. Thanks
Oh my goodness!! Thanks for clearing up ground faults..
This is very informative and very well put together. I love that there aren’t 20,000 jump cuts.
This is a great video and you are a great teacher. Thank You
I really like your explanation. I wish you would have done a brief overview and then had separate videos for further explanation about arc fault works. I was curious so I went and watched other guys explain arc fault and sine waves.
Great video. Thank you for sharing your knowledge.
Great information, very well done , Good teaching videos for professionals !
We had a lighting strike a few blocks from our home in Austin, TX. A number of things are not working but the worst is the AC. My question is simpler though. It's about a GFCI in our kitchen. It has worked for many years. Now it seems to be faulty in that it does not supply power to it's sockets or the others that are wired to it.
So, handy-man that I am, I bought a new identical GFCI and a non-contact voltage probe. (The probe was so that I could identify the breaker that feeds this outlet.) With the breaker off I removed the old GFCI, labeling the wires as I removed them. There was a single ground wire, The supply had a hot (black) and neutral (white). The load had a hot and neutral also. I connected all five of those wires to the exact same ports on the new GFCI that they were removed from the old GFCI. When I turned the breaker back on a little green light appeared on the new GIF. (The old one didn't have that feature.) I plugged in the NEMA-5 3-light tester and no lights turned on.
What is wrong and how do I troubleshoot this? Point me to a video if you've covered this before. Thanks for a great channel.
Excellent editing and great information!!
thank you for the video great job!
The double bird, whether intended or not, cracked me up and made my day LOL. Great video. I'm just a generalist home inspector but run into problems with these things all the time. Pass it on to a licensed electrician for safety. I did work around a lot of ungrounded 3 phase 450 VAC in the navy in a previous life, though. Seen three people get electrocuted, and all were from less than 150 volts. It's the small stuff that'll get you.
Hey Dustin really great videos!, I love the way you teach and your passion about electricity can you please do one about ballasts? (I know you did one about the HID light ballasts) the working, different types (dimming etc.) and wiring, thanks in advance!
Nice when another electrician watches and comments on his videos.
Excellent information, thank you a ton.
Well done on explaining this.
Dustin, how about addressing nuisance tripping and strategies for dealing with them? The codemakers know it's a problem so allow fire alarm and burglar alarm circuits to be exempted. Having to go down into the basement, or in your case outside to reset a GFCI/AFCI breaker seems to be a pain in the ass to be avoided. If the NEC allows a metallic wireway to the first device, and then a dual function receptacle, wouldn't running a MC homerun to the first receptacle on a kitchen small appliance circuit and then NM cable to downstream receptacles from the load side of the dual function receptacle work? Or just MC to the first plug on a bedroom circuit and use an AFCI receptacle since they are half the price of an AFCI breaker? Easier to see and solve a problem on your kitchen countertop then in the basement.
Dustin you are amazing! thank you!
any chance you could do a video on wireways, cable trays, auxiliary gutters, busways and splitters. Their uses and differences.
Really appreciate all your videos!!
Thank you for vid...awesome 🤙❤️🔥
Can you please do a follow up video on why Arc-Fault breakers have a lot of faulty tripping. Seems like every electrician I work with hates them, even though they're code. Is there a way to prevent this? Any insight into it would be great!
according to his explanation they react to any anomaly on the circuit, not just to the big ones like the regular breakers, that explains the extra tripping.
This is complete hear-say, but I've heard a few people saying the square D dual function breakers are less likely to cause erroneous trips than just the std AFCI. Have not examined this myself yet.
Awesome video. Thank you.
Thanks again great info
Hey Dustin just wanted to say I love your videos. You are saying that in your jurisdiction the refrigerator had to be GFCI protected. In my jurisdiction it doesn't have to be. What are your thoughts on it? Do you think it should or shouldn't be?
Excellent! Thank you!
The effects are hilarious all while relaying great information. Bravo Brother!
Great instructor. Got good insights into the thought processes of a professional. Feel a lot better about your rates. A friend of mine died working on a dryer. Made one mistake. I have much respect for your profession. Thanks.
15:20 "Duel' is "Combat between two parties" vs what you actually meant, "Dual", which means consisting of two parts. Grammatically pedantic, maybe, but I already received a double-bird at 5:36, so I needed to earn it.😀 On second thought, sometimes when trying to wrestle those long Square D PDFC breakers into a busy panel, it seems like "Duel" may be a more accurate description. Great video, as always.
Beyond everything else great about the info here... I'm glad #5 was featured, otherwise I was thinking about that too much until he showed up 🤪
Loving the videos, very helpful 👍
Awesome. I love the DF breakers
I love the new editing. Cheers. Great info
HAHA!!! FLASH SUITS song....... Love your content so much, I'd EVEN buy your music recordings! Thanks for making it interesting and keeping it fun while educating. GREAT TEACHER!🔌
Great vid bud love the effects
LMFAO I love the Johnny 5 cameos! Also, excellent explanation as always Dustin.
Thank you so much man, you explain in a minutes what I'm trying to learn from a long time, just one question, if you install a dual function breaker in kitchen sink or in bathroom receptacles do I have to install a GFCI receptacle?
No
loving the graphics!!! and info... thx
Nice video. Was wondering if there are any circuits it wouldnt make sense to use a DF breaker on in a home? I get customers with young children or folks that previously in their lives had a house fire that want top notch electrical protection, whole-house protection. Thoughts?
That was a great explanation thanks
I have a serious question for you, and I'm gonna describe it as best as possible. I'm replacing my fuse box in my shop and I have been ripping all the old wiring out, and one single 120 circuit here had a double pole breaker box, just 1, double pole box, with only 120 going to it. The line came in through one lug, then there was an insulated jumper going from one breaker to the other, and then the load came out the other lug, so both breakers were installed In series, and the little clip that makes the breakers work together was removed, what would the reason for a box wired that way be? Or is it just completely wrong? (It's getting ripped out regardless).
Great video as always. Question on the GFI breakers with the neutral pigtail. If you have a couple of branch circuits to an area requiring protection like a pool, kitchen sink area, etc and you have just about room in your conduit to pull another hot so you will be sharing the neutral, will the breaker for the new hot function properly without a dedicated neutral? If not is there a way to make that new hot GFI protected? Possibly installing a GFI receptacle? Or must that new hot be paired with its own neutral?
U cannot share a neutral with gfci..it will trip due to 2 different loads on the same neutral not to mention it could overheat the common neutral connection..and if u do decide to share a neutral it must be on a double pole breaker..so when power is tripped on one circuit..both are tripped...in my opinion shared neutrals shared NEVER be allowed..not an electrician here..just my thoughts.
I have like 3 circuits in my house with 12/3 cable that all share a neutral..i have just regular older style QO breakers on these circuits and have considered upgrading my breakers to freshen them up..my question is if I use AFCI or dual function will I have problems with nuisance tripping with these circuits? And if so what do you recommend?
Great explanation!
At the time mark 11:58 you say that the GFCI will trip with the fault current within 5mA (which can be understood that trips at lower current) and some will, but majority will not. It would be better to say that GFCI trips when fault current exceeds 5mA. Beside that very good and useful video.
Excellent! Good job man!
Thanks for excellent video, I am in the process of replacing my home electric 100amp panel to 200amp with all new breakers.
My electrician thinks, I am asking too many questions regarding electric panel and breakers.
Great stuff as always bud!
Great content and explanations in this video. 👏👏💯👌