Engine restoration Diesel engine cleaning and How to diesel engine restoration Toyota
Vložit
- čas přidán 8. 03. 2021
- Toyota 2J Engine Full Restoration. How to rebuild engine. Rebuilding an engine. How to diesel engine restoration video. How to repair engine. Toyota 2j engine restoration. Engine restoration engine clean.
Rear Wheels Hub Repairing : • Repairing Broken Rear ...
The guy at 9:27 said “who will watch such a long video”. Little does he know that millions are watching and admiring their work from all corners of the world.👏🏻
that's wonderful
really hardworking guys
this crew makes a ring compressor out of scrap and we complain about not having the best brand this ring compressor worked better then some name brands lol and easier to wth haha way to go guys .
Thank you so much for your comments ❤️❤️
They need to make and sell them.
Htg tu muy g
Anyone who works on machinery can see that these men have the fine "mechanic's feel". Wonderful!
I assume that you are just kidding.
@@jamesmckay9966 No. @ 9:50 watch the guy give the L wrench a little snap as he tightens home the bolts.
All car and truck repair students in the States should be required to watch all of these, another excellent video, keep them coming!
Thanks ❤️
😄Two words Torque Wrench. Two more words Deck plane. These guys would be great apprentices in the states but would have to learn much much more to be competitive in a market with modern vehicles.
@@joedell71 Exactly.
They can get away with what they do, because they're dealing with a basic engine here. In reality this isn't a rebuild though. They cleaned things, and it looks like they replaced the rings. But the scuffed pistons, and ugly looking bearings were re-installed. No idea if any valve work was done.
Guaranteed this doesn't have the compression, or oil pressure a new, or properly rebuilt engine has.
@@joedell71 nothing a good ol shellac can't fix
@@erikj.2066 Lol in the US and Europe you would get sued to hell for not properly rebuilding a engine... this aint road worthy. and i would not let ANY students watch these videos... its a good way to ruin a good engine actually.
Если застучавший двигатель разобрать, тщательно помыть и потом покрасить, то после сборки он ещё походит. Кстати, если вдруг где то большая выработка или большие зазоры то покрасить можно в два слоя.
посмеялся))) вкладыш после проворота нужно простучать молотком об шейку и залачить в три слоя))
И дырки, дырки , много дырок насверлить в поршнях, во вкладышах
Собрали покрасили и как контрактный в Россию отправили
Тоже самое хотел написать😅
@@vn3946 по вкладышам видно что старые выработку видно, а кольца вроде новые только это все равно кувалдо- тряпочный ремонт такой дизель долго не будет ходить, а без шлифовки еще и газить начнет
precision hand-rebuild done with no power tools, no lifts, no fancy parts washer, no fancy gauges or greases or oils, just pure work ethic and knowledge. i want the dude at 21:58 doing my next race engine build; dudes obviously got it down pat
Yeah I don't think u want that lol
سعودی عرب سے: -
حیرت انگیز کام اور ہمارے پاکستانی بھائیوں کی تخلیقی صلاحیتیں
SHUKRIA bhai ❤️❤️
To anyone who really doesn't understand the very basics of how any combustion engine works (whether it be diesel or petrol) the enormity of what these guys are achieving will pass them by. I can only say an enormously well done.
They didn't resurface the cylinder walls. I see they took everything apart and cleaned it, They appeared to just put it back together. The piston rings look like the old ones. They went in a circular pattern to torque down bolts, which is wrong. I could go on and on. I think they even used the old connecting rod bearings. This thing will be burning oil on first crank. But its got a fresh paint job...
@@StockIndexFuturesALGO This! not to mention all the rust on the engine is going to eat through it. that engine will not survive for long.
@@StockIndexFuturesALGO I agree, why didnt they just give the outside a paint job, nothing new on the inside...used piston rings LOL, thats funny!
@@chadsimmons6347 hey, straight 50W motor oil covers a multitude of sins!😁
@@hoost3056 Cold winter starting might suck, but yeah oil- grease would stay in the block😀
Ребята, согласитесь, они молодцы. Смотришь и видишь, что многое можно не заметить, а починить и будет не хуже нового. Ведь мы все не просто так залипаем на них.
Hello my friend writing with great pleasure🔔🔔🔔🔔
Он ( двигатель) уже на утилизацию... Не хуже нового? Это вечный геморрой владельцу.... Но ,вынужден признать, что весь современный автопром ведёт себя аналогично- задача стоит в том,чтобы подобный этому агрегат ,прослужил только гарантийный срок ( а это не так уж и много) и далее ,владелец такого ( извините) мотора ,а зачастую и всего автомобиля,начинает открывать двери фирменного автосервиса исключительно ногой, все работники данного сервиса обращаются к нему по имени- отечеству,а владельцы магазинов фирменных запчастей встречают его с хлебом- солью...
@@user-mg9gw4ir2m Hello my friend writing with great pleasure🔔🔔🔔🔔🔔🔔
@@vetersevernyi6181 только не рассказывай мне - авторемонтнику с 40 летним стажем,кто из нас диванный эксперт...хорошо?
@@vetersevernyi6181 это не ерунда - подумай сам.дело происходит где то в Пакистане или Индии,этот автомобиль попал туда уже очень уставшим, эксплуатировался он там жестоко,обслуживания грамотного он никогда не видел,все рабочие жидкости( масла,антифриз) с вероятностью в 99% не соответствовли тем что предписаны....По крайней мере то,что они вылили из поддона,маслом назвать нельзя .Далее- Весь ремонт заключался в разборке и отмывании деталей,которые сильно б.у С ЦПГ не делалось ничего- даже кольца не поменяли, коленвал ржавый,,ГБЦ тоже даже не проверили на герметичность и прилегание..и собрали мотор практически на земле в песке Моментный ключ? Не не знаю..Лучше этот двигатель после ремонта ну никак не стал( разве что снаружи чище) Ну да ладно - в следующей реинкарнации у водителя будет новый двигатель.... возможно. Потому,что с таким ремонтом он" превратится в баобаба,и будет баобабом тыщу лет,пока помрёт"
Не вижу никакого смысла в таком ремонте.
И да, за соседа хлестаться не надо Сам то по жизни кто? Что умеешь,чем на жизнь зарабатываешь? Или мама пока кормит?
This engine is now ready for another one million kilometer ! Thanks for restoring things and giving it a second life. I read a few comments on how things were not done perfectly, but at least you do it and an old engine runs Again. Here in Europe the labour is so expensive they would just scrap the whole thing and buy a new truck all together. . but at the same time, everybody says we have to save the planet....you are really doing something for the planet by restoring this engine ! So i support your job 100% and you can be very proud of your work ! I would be so glad to come to Pakistan and meet you ! Respect and keep doing it ! Regards from Europe
Thank you so much for your comments ❤️❤️
MAYBE 200k miles from the way they rebuilt it, nothing spec together, no torque patterns, might look nice but won't last long.
Well said same thing in here in the US just parts changers buy everything new so bad for the environment imagine the amount of pollution it takes to make a new truck
@@terrancel108 You've never done it so how do u know.
@@Mike__james , you have no idea what I've done in 57 yrs, I've got more toolboxes than you've got hands and feet, and more toolsets than you have fingers and toes. I do know YOU haven't done it or you wouldn't say jack.
Its amazing what these guy can do, we are so privileged with all these fancy tools and these guy just rebuilding an engine in the dirt.
40 different people including kids working on this engine and no bickering. Just amazing.
Thanks for watching ❤️❤️, kids are learning 😊
No bickering on camera that is ;)
I'm a driver, but I watch your videos often. It's really useful. Thank you.
Thank you so much for watching & comment ❤️❤️
Их бы на нашу металлоприёмку, они бы стали оттуда машины выпускать.
У нас своего автопрома достаточно
@@aldeep2042 Своего говнопрома,
На наши приёмки машины своим ходом приезжают
Anyone else hear the electric planer in the background ??? !
Very good work guys. Great result. 👍👍👍👍👍
😍❤️
@@PakistaniTrucker 👍
Think I saw a feeler gauge but nothing more complex. No pocket calculator or Plastic gauge, just teamwork and hand tools and old fashioned hard work. These guys are awesome.
Thanks 😊❤️
Пацаны, по-русски говорите? Респект и уважуха вам, от души ✊🏻
большое вам спасибо ❤️️❤️️
Я не могу говорить по-русски. Я использую Гугл переводчик
@@PakistaniTrucker (Удачи!) Good luck! 🍀
Пожалуйста не говорите этим ребятам про микрометр,нутромер, выработку в цилиндрах вкладышах , маслонасосе, динамометрический ключ и т.д.
Они очень будут удивлены
Покрасили мотор на столько основательно что толкатели пришлось забить молотком)
Не следует считать себя умнее других. Всё они прекрасно знают и умеют пользоваться! Вам не приходило в голову что этот мотор принёс клиент и попросил перебрать практически за "спасибо"? Как говориться "какие бабки, такие тапки."
These are REAL men! Nothing in our world is impossible to those with strong spirit and will to survive. No excuses only action!! Amazing work!!
Thank you so much ❤️️❤️️
Real men that reuse old crank shaft bearings haha this engine wont last long waste of time and effort
Why won't it last they did the semi equivalent to an in frame rebuild they replaced the sleeves piston rings rod bearings and resealed it very common in the diesel truck industry if its within spec there's no reason to waste time and money replacing it .. I guess that's the difference between those who sit on the sidelines making excuses and those in the game making shit happen. I'm sure that engine will be around and running long after you become worm fodder
@@Mudsuitable Right, thanks for your comments 😊❤️️
@@Mudsuitable i'm with you...ive used old bearings many times in the early days...never had a problem......i like mr tension wrench:):) ive done that before when didnt have one
you brothers are not just mechanics
you are highly skilled engineers who can repair anything without being in debt to a snap on tool seller for the rest of their life ,alot of tools can be made as needed
and it is great to overcome problems if you make that tool , you combine all the skills metalwork , welding , and turning and i dont think you guys have been beaten with any old machine
keep the wheels rolling
and may peace be upon you
Вот кто бы что плохое не писал, все было здорово, я сам моторы собирал себе и еще смогу...есть недочеты, но мотор будет жить, не нужно придираться к качеству, в заголовке указано восстановление...не нужно понимать восстановление как бы сделал Я...вот когда сделаете то и покажите видео как сделали бы вы, нормальный рабочий вариант, парням с руками из правильного места уважение за мастерство, имхо ни кого не хотел обидеть или оскорбить
Большое спасибо, за ваш душевный трогательный комментарий. Добро пожаловать брат ❤️❤️
@@PakistaniTrucker добро всегда несет добро спасибо , брат,
Не будет там ничего жить. Если внимательно смотреть, песка внутри на деталях очень много.
@@alexeis6106 это ресурс,мастер сам определет ресурс,1,2,3 подмечено клево
It's a great feeling of accomplishment when you take something completely apart and bring it back to life. This is how i learned to rebuild an engine.
Thank you so much ❤️❤️
Been watching this channel for a while, and it's unbelievable what the Pakistani workers are capable of. No screwing around, just get it in there, repair it, and get it back on the road. Fantastic!!
Thank you so much for watching & your comments ❤️❤️
Just one of these workers is worth one hundred American mechanics!
Bloody brilliant!
Only new bits were the glow plugs, the paint and the belts.
Self torquing elbow, diesel pump that’s plonked on, and spanner’s.
Whether the engine lasts or not - don’t care, fair play to all of them all.
Lovely video.
These guys would go nuts at a harbor freight
LMAO I know. When I was growing up over there, I realize that theyhardly anyone uses power tools (bikes/cars) except maybe high end car mechanics.
Edit: I guess they won't have problem with bolt stripping LOL
I have a more complete set of tools behind the seat of my truck, you know, for emergencies. Very impressive what they can do.
@@rexmundi8154 and to think that I bitch and complain when I have to get back out from under the hood to switch socket extensions
They don't need harbor freight they make their own tools, probably better quality too.
Yes I love the skills of all these guys from these type of videos the part that frightens me though is these chemicals that they're soaking their hands in not even realizing the potential future cancer causing elements to their thyroid hypothalamus pituitary you name it a simple gloves would help but I know every penny counts in some of these people live off of less than a dollar a day
Кольца, гильзы, свечи , сальники и все? Дай бог мотору большого ресурса. Цвет красивый.
Молодцы ребята. Вся работа в спокойной обстановке и без лишних движений
Прикалываешься???
From now on I'm gonna start saying "It Ain't Over Until The Pakistani Mechanic Says There's Nothing He Can Do With It."
Thank You so much 😊❤️
🤣🤣 indeed very indeed
😂😂😂😂😂👍
Indeed, they are good in everything... have you seen there food industry. You will 🏃♂️🏃♂️🏃♂️for it. I pray they bring it to Africa, (kenya)
mechanic: sorry bud there's nothing I can for you.
Pakistani mechanic: hold my beer, give me 15 minutes.
Imagine if these guys had access to decent tools, workshop equipment and manuals. They keep stuff working with almost nothing.
Thank you pete lacey ❤️❤️
They wouldn't use them...i saw this when i was in iraq.
Hello my friend writing with great pleasure🔔🔔🔔🔔
@@alizahraelbldozeir5539 thank you ❤️️❤️️
Whats your you're idea of decent tools snap on Matco them tools don't make you a good mechanic. Just common sense
Most beautiful scene I have witnessed. Guys working together instead of competing with each other.
😍❤️🇵🇰
Молодцы парни, теперь попробую сам таким макаром. 👍👍👍
Спасибо большое ❤️
The mechanical diesel engine was one of the world’s greatest inventions!
Right 😊👍❤️❤️
True mate backbone of transportation industry 😌
Это улучшенная версия "Психопатов синдиката"! Помыть и продать))))))))))))!
Смотрите внимательно. В конце видео видно, что этот мотор будет использоваться как привод для генератора. Для машины не сгодится, а вот обеспечивать электроэнергией какой-нибудь отдаленный аул - самое то. На холостых и с минимальной нагрузкой ему ещё пахать и пахать.
I am fascinated by the fact so many can work together on the one engine and not get mixed up, great work. Also they have a great feel for what they do and so the hammer is left aside.
@Terrence Bullock me too....it makes you wonder... do we 'over do' this procedure over here...is that why a rebuild is so f....n expensive in our country...? the other day i watched a video of them rebuilding of all things...a clutch...an item that gets thrown and replaced over here.....wtf....RESPECT
в советское время , когда не было запчастей и нормального инструмента , примерно так и собирали движки . ходили они правда совсем мало и очень тихо ) затяжка головки по какой-то уникальной схеме проведена ) клапана сами в процессе отрегулируются !
Pakistani mechanics are very good even with basic tools gets the job done..cheers from philippines.
Thank you so much ❤️❤️
Все четко пацаны!!!! Так держать!!! Никого не слушайте!!! Я бы порекомендовал бы еще внутри цилиндры покрасить, во первых не так сильно поршня болтаться будут, ну и красиво же))))))))))))))))))))))
а ведь умные, бумага чистая для прокладок, не в клеточку и не газета )
Necessity is the mother of invention.that kid is going to own this shop one day.this is called hands on learning.
Right ! Thanks for watching
The engine was almost dead! A great team work brought it to life!!👍👍
Thank You ❤️️❤️️
I think you could make a 3 hour asmr video of that engine running and you'll get over 3M hits!!
Right 😊
Thanks for watching & comment
и ещё 10 лет проходит до следующего ремонта. отлично, молодцы.
I love it! These guys are the real mechanics, they make it work and work with what they have 👌🏻👌🏻👌🏻
اجمل شيء العمل الجماعي من مصر احييكم ياخوتي من باكستان الشقيقه احسنتم العمل باقل الامكانيات
Блин, ну вот люблю я смотреть, как ремонтируют в Пакистане! Какое-то всё родное, наше! Ну точно, как у нас!
большое вам спасибо ❤️
Не могу не согласиться... к сожалению)
Глянь канал. Про моторы
Не унас снег, и минус 30. А так тоже самое.
Главное что бы детали лишние не остались 🤗👨🏻🔧👍
Love the Snap On filthy towel piston ring installer tool.
Assalaam alekum ustad ji our aisa koi video banay mai ye video kai bar dekh kar bhi acha lagta hai love for you and your team ❤💖💕 love from India 🇮🇳
This was me last summer rebuilding the engine on my Ford 3000 diesel tractor. I had the benefit of a machine shop to fit the pistons and valves though. All in all not much different than these guys. Not what I would call an easy job. Hats off to these hard working men.
Thank you so much Brother ❤️❤️
Ну хоть масляный фильтр вроде новый, а то я думал старый покрасят.
Я думал что его вскроют почистят и заварят😄
неа его разобрали промыли и обратно собрали и покрасили в черный цвет
Они умеют свою делу уважаю вас МашаАллаh
@@vadiku6935 я тоже так думал!!!
Просто все скинулись аулом и купили 1 фильтр.
No torque wrench needed all the magic is in the mechanics hands. Good job appreciate the video thanks for posting.
no gloves - and repairing WHILE SMOKING. I'm referring to the guy with no thumbnail.
but seriously, these men are gods in their town. that's definitely a coveted job.
Ровно работает, красава моторист.
Спасибо ❤️
So you don't need an $8000 tool box and $16,000 dollars of tools to rebuild a engine? That's NOT what the Snap-On rep told me....
Exactly
Who's got the torque wrench? We don't need no stinkin' torque wrench!
The sad part is these guys probably do a better job rebuilding an engine in dirt with $20 in tools than most of the guys that own those tool truck setups.
Fucken right . This prove you dont need expansive and fancy tools .
After a good amount of miles you _will_ notice the difference in the poor quality of the (applying of) sealant, the cheaper gaskets, rings, oils and the lack of properly torqued screws. But I guess in India, that's the moment when you bring in your engine for another restoration ;)
У них там даже человек с динамометрическими руками есть, все как положено.
ага, под пиковую нагрузку еще мальца подтягивает
😆😆😆
попробуй собери также?!....
У них даже трещетки нету
+90* доворота)))
Мотористы от Души!!!
Благодаря ти много !
Bonjour respect, du bon travail (sans nos outils) !
Если авто попало в Пакистан, то оно обречено жить вечно.😀
Жизнью это сложно назвать, это скорее мучительная смерть растянутая на бесконечность
И получит он имя ,,борбухайка,,
Вечна агония !!!
Это чистилище
Машины которые плохо вели себя при жизни- попадают в Пакистан.
German Torque Spec GUD’N’TYTE 😳😆
Awesome work
I love their method! No nonsense! And Love their torque setting! It works! Toyota Engine!
Nice to see true mechanics at work, no torque wrenches just by eye - that is the sign of a true engineer.
A true mechanic/engineer would have used a torque wrench, just like the factory did when the engine was first built. Not using a torque wrench is not the correct way to do the job.
Not taking anything away from these guys, they do a great job with what they have available to them, but let’s be realistic, they are not doing a proper engine rebuild here.
@@TechRossNZ You completely miss the point of the comment, sitting in a western 1st world country is all very well. I have seen people rebuilding a LR diff in the desert and sand complete it with ease with very few but essential tools. Torqueing down bolts whilst ideally done with a gauge of some type can be done with lots of experience with reasonable success. Remember these engines are not freaky intolerant divas but workhorses that are built like tanks. I was commenting on the abilities of these guys to do the job with very little. May be well to remember that when the AK47 came out everyone trashed them but I've seen one picked up after weeks in dirt and mud in a dry area, all that was needed was the bolt kicking open a bit of a shake and off it went. A lot of simple engineering is similar.
These Guys are amazing given the circumstances. Excellent work 👍👍👍👏👏👏✌❤☘
Thank you so much ❤️❤️❤️
Как всё покрасили! 35 лошадок к карме)
In the distant past, a served my apprenticeship servicing and repairing HGVs and PSVs. I watched this video and know that I could rebuild that engine. Sadly no one in the UK values or needs these skills. I have a garage full of tools that in the future when I leave this world, the younger generation will not want or have any use for.
Maybe you teach a person and gift your tools to that person so the person continue working and carry on your legacy ❤
@@UmerAbbas8 I spent 30 years as a school teacher. Would be nice to send them to Pakistan and gift them to the locals? Take care buddy.
Наконец-то секретные кадры по сборке двигателей с завода Тесла. Думал не дождусь!
The guy with the mangled thumb is the boss.....he takes his smoke breaks over the open pans of gasoline.
I believe it's kerosene. :-)
Not giving a single fuck is an art
Great job guys amazing job. Extremely impressive you guys working together I wish our guys would do the same.
Ha, ha.
Overpriced Snap-On and Matco tool trucks don't bother stopping, just keep on driving.
Great video.
Good work and very clean parts love from India 🇮🇳
Cleaning and some paint is the ultimate way of repair even totally ruined engines☺️
No need for new bearings either
Wymienili tylko uszczelki i pomalowali blok silnika . Widać jakie zuzycie tłoka w górnej części i gładzi cylindra . Głowicy nawet nie demontowali .
The scored pistons and painted lifter bores are what sold me. Total crap work.
Another great video, I look forward to each one! These guys do this fast, cheaper with the same results than here in the states. Hats off to them!
Thank you so much !
No machine work required.
@@misterhipster9509 thanks for watching & comment ❤️
These mechanics are amazing to get this done in the shop they are in no complainers in that shop or snap on man great video thank you
I have rebuilt many diesel engines myself. I have done every engine the way I was taught to be correct, by measuring everything and buying new parts and premade gaskets and using torque wrenches ........the whole nine yards. STILL after I get it together and start it sometimes there would be a issue somewhere. For example I measured all my cylinder bores with my inside mic. order my new slugs from clevite, and still got a hundred thousand under size piston from Clevite. Of course I made the mistake of trusting Clevite and didn't measure my new pistons before installing them. So after all the money for new parts and replacing all the pistons and rings and bearings and so on, I get the diesel engine all done and start it and there is a constant tapping sound in one of the cylinders, because of the just so slightly undersized piston, the piston was rocking up and down the cylinder and the piston skirts was knocking on the cylinder wall. My point is, I did everything correct and sometimes you can still have a issue. These guys are so good the can look and feel the parts going together and know if everything is within spec enough to work perfectly!!!! And oh my god, look how they worked together so perfectly!!! Hell here in America we are so spoiled and want everything our way, that two mechanics working on that engine would kill each other within 20 minutes of working together!!!! These people have no choice!!! They either do it or they don't have the engine!!! I am so impressed!!! I would bet that engine will run for many more years flawlessly now!!!! That was just impressive!!! it even looked like they made their own gasket sealing paste!!!?? Using old manilla office folders to cut gaskets!!! And painting over gasket areas, hell that paint when it gets hot will probably just help everything stick together and seal even better!!!! I have been a mechanic for over 20 something years and I have seen a lot of shit and done a ton of shit, BUT never seen anything like this and it WORKS OUT GREAT!!! This is just because of their experience and know how!!!
Love reading long comments, I appreciate you sharing your personal experience relating to the video ❤
А потом на авито-"ребилдинг из америки-воссстановленный в заводских условиях"
The sound of start itself indicates that engine was perfectly restored and precisely repaired.
❤️❤️
Basic tools simple approach result !! Impressed respect guys well done 👍
Ну что разобрали помыли покрасили собрали ещё 100 тысяч пройдет.Главное Молодцы все умеют нечего не теряют.Да ещё при сборке запчастей не остаётся.
Можно много где докапаться, но блин, мотор собран на коленке. Гараж 54 и тот бы хуже сделал😄
Дружище, мотор не собран, а скидан до кучи, все это полнейшее фуфлище от начала и до конца. Знаю, что говорю.
@@samuraispb согласен полностью. Может у них туго с детальём, раз так собирают. У них как глянешь - всё подобным образом чинится)
@Авто Хирург наверное так заказал клинент, собрать с говна и палок😅
Надеюсь не весь Пакистан так моторы собирает
@@samuraispb у них навык руки набиты, даже вес чувствуют😁
Разобрали, помыли, собрали=капиталка.
Я думал покажут как гильзовали блок, шлифовали поршни и т.п. А ведь правда - помыли, покрасили и всего делов)))) Индийские поделки... Так мило)))
Только не показывайте Артёму К Пауэр а то скажет дядя шлёпа собирал 🤗😂👍💣
@@user-bl9jb1wq2z он от увиденного в обморок упадёт! потом очнётся и начнёт перебирать моторы так же!
как мило он вколачивает толкатели штанг по покрашенному... или выхлопной коллектор садит на герметик по покрашенному... клапана так вообще походу не регулировали...
@@romanbabin5574 вся капиталка сводится к мойке покраске и замены колец и вкладышей.
Ek banda bech me bolta hy ki "itni baddi video dekhyga koon" .. That was funny..but bhai g.. India me ,im watching it. N im saying you guyes do awsome job sir.. Great work
G bohat bohat shukria app ny itni gor sy dekha r suna ❤️️❤️️❤️️ !
Wo mechanic ny bola, wo boht khush hoty han video bnao to...
The Chief Mechanic is very skilled and respected.
Thank you so much jon Young ❤️
Я один ждал не перематывал когда они двигло изнутри покрасят?😁
Они 100 раз так делали
Я ждал что Хон на гильзах в ручную наждачной нанесут)
@@user-vf6tw2gj8v можно было и поршень наплавить
@@user-vf6tw2gj8v Так нанесли же на поршнях)
Двигло не двигло, а каналы толкателей штанг газораспределения явно покрасили, а потом их туда молотком захреначивали. Это какой-то пипец, давно такой рукожопости не видел
Nobody can't beat a shit out of an old school toyota engine.
Absolutely love the organization skills.
Very good to watch so many skillful mechanics!
Aqui no Brasil vocês ficariam ricos, os mecânicos daqui são preguiçosos. Parabéns pela determinação amigos
interesting video, specially when the site has a dirt floor and pistons are worn out... Oh well you do what you have to do with the resources that you have. Well done!
Thank you so much KLAUS MAARTENS ❤️❤️
Western mechanics and farmers used to be like this. When you didn't have it you made it, and if it's cracked or broken you fixed it. You had to keep going, and you figured it out. Limited resources equal maximum ingenuity.
Most machines were not built to the tolerances that we have now and that really was the secret. Just get it in range, and it will run👍
Brutální, technicky katastrofa, ale výsledek je skvělý.
Зовите Ходоса , пускай учится )
Человек из леса так же делает
просто покрасил и воткнул
😂
За Ходоса в точку)
Спасибо поржал! В точку!
You can always judge the experience of the head mechanic by his thumb and the way he pronounce click when the correct torque is meet.
Jon Jessen
thank you so much for watching & comment !
@@piperdoug428 skills🙂
Old School Mechanical Engineer!
Ripper comment mate
I think the clicker is broken...he’s waiting for the snap-on truck to come by. Hmm where is that snap-on truck.🤔
This mechanic are the real mechanic not lake ones today they need 100 k tools to change a tire great jobs guy do what you have to do to get the job done no torque no ratchets you see the and nothing wen you crank and start is Toyota to great job guy 👍👍👍👍💪🏼💪🏼💪🏼💪🏼
I have been in the business 30 years
For the most part it is part replacement over rebuilding of drivetrain components.
It’s cool to do work from scratch, that’s one reason I like to do custom exhaust, because you can make something
Anyways
These men are very good at keeping clapped out vehicles going down the road
Блин, есть куча замечаний - и то , что водой детали мыли, и то что замки колец не правильно установили, но видео все равно понравилось. Стер матюки и пишу это, как не крути, прикольно все таки получилось.
Такая же фигня, там все в помойку пора выкинуть, а они бережней чем с новым обходятся.
Parabéns muito lindo o trabalho de vocês
Looks like it spent some time under water? Quite a cleaning process to get it into operation. Great video thanks for posting.
Es ist ein Traum euch bei der Arbeit zu sehen. Ehrlich Top Arbeit! Danke für das Video!!!
Все инструменты из чего-то собраны, все процедуры на коленке сидят по братски мотор ремонтируют
А фули .урбаны
@@yurijeremenko1734 эти фурбаны как ты выразился на шее у родителей не сидят в отличии от тебя, и на пиво не шибают! Они руками себя кормят.
Молодцы. Умелые руки и минимум комфорта
Спасибо ❤️❤️
@@PakistaniTrucker владеете русским?
@@arkadiynifantiev6947 Нет, я использую гугл переводчик 😊
@@PakistaniTrucker удачи вам!
These are real masters who understand how a car engine breathes. God bless you!
@Karl Juice transaksion error 😉
ماشالاه ماشالاه به شما استادان و مکانیکهای پاکستانی که با کمترین امکانات چنین کارهای بزرگی را انجام میدید
مکانیکهای اروپایی باید جلوی شماها لنگ بندازن احسن به شما و اینشالاه زنده باشید