670cc 2 Stroke Go Kart FULL SEND | "Neighbors' Nightmare"
Vložit
- čas přidán 27. 08. 2024
- Our Ski Doo Mach 1 powered go kart is the most powerful go kart we've ever built. Weighing in at under 400 pounds without a rider, this 125hp go kart has a better power to weight ratio than a Dodge Challenger Hellcat. In today's episode, we install a muffler, fix the floor, install a chain guard, and send the snowmobile powered go kart around the CarsandCameras circle track, and do a burnout until the rear tires pop!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Need to get this thing out to the drag strip and get it doing timed runs, see how much of a rocketship this thing is... :D
Yes either that or a two stroke engine of this magnitude on a stretched mini bike
Its been done snowmobile twin on mini drag bike. And triples on ATV frames
@@jasonwhite8722 If people gave up on things because "it's been done", then nobody would ever do anything new, just think of all the cars ever made that would have not been made because Karl Benz already did it once so nobody did it again.........
I think an 1/8 mile paved oval would be cool, and try running both directions...
😮8😮
Can't believe Ike sent it through the field at the end
Lol 😂 I believe it it’s Ike haha. 😊
I mean… nothing new tbh lol
I believe we can all agree that Ike likes to party 😆
Imagine this monster with offroad tires on the cnc grand prix 😂.
And by the way, ' cnc - hugging a rocketship from the outside' would make a nice t-shirt 😜.
Treaded tires for the rear and died laughing at Charles “I was meant to drive this thing” “felt like a rocket , bear hugging that thing “ 😂
Same man, dude had me cracking up with those lines ahahaha
Shouldve put some off roadin tires :)
With this thing you’ll be wondering if the smoke is from the exhaust or the tires!
I’d love to see it Against the ducarti
I made that race comment on last vid & got over 240 likes. We are just 2 of many that would love to see that happen
@@mystafrawzt yeah it will be close
@@backyardrestorations I think all those in favor should like and comment on it
Maybe put some slicks on the Yard Dart too?
czcams.com/video/DD3RpEWybII/video.html
Every 3dB, the sound energy doubles(twice as loud). The mic in your phone isn't designed for anything over 120db and the exhaust is more like 145-150 at the pipe.
I kept thinking they should have measured from 100-200 feet away so they wouldn't max out the phone's microphone.
They shouldn't be measuring indoors like that, as the reflected noise will really throw off the results. Also need to test at the distance & angle each time. We test bikes using SAE J1287.
I've got a Term-Lab meter if you want to get exact measurements. Only problem is im in florida lol
my stereo in my cars a 140 db all day so whats the difference between high hz and low hz at anything over 120 db
Damn....I only hit 126, Two old school 12" Rockford Fossgate's
Continuing to remind you guys about the necessity of warming these snowmobile engines up. They need to sit for a bit or they are going to blow something. They make lots of power, but give her a few minutes before you send it! Looks terrifying fun! If you already do and cut it out of the video ignore this.
It's a contest between "what they oughta" and "what they wanna". And with a bunch of adult sized kids, which do you think will most often win out? Just sayin. 🙂
This because I know several, and to be honest, sometimes am one.
@@MrJdsenior yeah, I own one of the sleds these engines come in and I'd be lying if I said I've treated it perfectly all the time. Just trying to warn them before they have a early end to this hilarious build.
@@ian3166 you also gotta take into account that at a minimum this motor will be at 40-50F ambient. No wear near as cold as a normal sled will see at most 32-anything below F (maybe 40/50 for the last ride of the season) So the motor is already at least 10 degrees ahead and in NC it will probably see more like 40 degrees at a hot 70 day
"Cold seize" is a term in the snowmobile world.
@Dobbies Revenge They live in North Carolina not sure thats considered the south. Also like ike mentioned the muffler they put on it was soaked with oil so when it got hot it was burning it off. Also not at all surprised if its smoking more than normal its an old 2 stroke that has possibly never been gone through.
Its hard to imagine just how incredibly loud a snowmobile engine actually is unless you heard one in person... the way the sounds just echoes back is like nothing else!
Braaaaaap
Yea. Mabe the oil injection pump is stuck fully open. Had that happen to me before.
Its smoking because its being ran in not winter conditions
@@thedude7726 no it’s not, it’s because the spark plugs are fouled because too much oil is on them and that is why it is hard to start and needs to be opened up before it starts running properly
Jetting might be off. Plugs wont make it smoke more tho. Either the oil injection pump is set way too rich or stuck. Or they run premix in adition to the pump. Mabe the open primer ports affect a/f r too. Im no expert.
"It's like riding a rocketship... on the outside" that needs to be on the t-shirt for this cart 100%
and on the back of the t-shirt it can say "and there's 4 superchargers on that rocketship"
"126db.... Not great but not terrible...." Don't think the phone mic is going to pick up much more than 120dB. Still that thing is nuts. Good stuff as always.
It's 15000
Plus the mic was facing away from the source so it wasn't getting a good read anyways and it was inside so it was going to read louder due to the reverb.
😆😆😆 Charles never ceases to amaze me with his descriptions, just the way he said "its like bear hugging a rocketship on the outside"😆😆😆
You need to put dirt tires on it and take it around that circle track with some water on it. That’d be freaking awesome
Love the videos. I usually don’t click on yt notifications, but when i see it says carsandcameras i click on it right away
czcams.com/video/DD3RpEWybII/video.html
Have you ever thought about building a sprocket for a mini bike or gocart that acts like a rear bike sprocket. That way it free spins when it's rolling and locks when you give it gas
@@wishicould473 the problem with those is they give out easy with anything more powerful than a weed whacker engine unless u find some that are built for lots more
Might be cool ,not sure you could make one heavy duty enough .
@@Todd_G_FPV that's why you have to build one I've had a few ideas on how to build it but I don't have the tools to make it
Charles' pure, unadulterated joy at driving this thing was awesome to watch.
AC to DC? Sounds like you need a FULL BRIDGE RECTIFIER!! 😂
It’s so easy to wire a 220 outlet, if you can build an entire cart from scratch you can wire an outlet. Great build !
...and if your building burns to the ground and the electrical didn't pass, good luck with your insurance policy... not only that, but all of the projects that would be lost...it might not even be the cause, but insurance inspectors find any excuse to not pay or insure you in the first place...
@@sykwookiee as a home owner you can legally do your own electrical, well at least in Florida. I guess not everyone is comfortable doing it, that’s ok to.
@@dadsshenanigans9632 Not all states are Florida... Actually most states require an electrician to do new plug specially when running a 220 line.
@@SilvaDreams if you can wire a 120v outlet a 220v is one more wire. Just saying, most people are intimidated by the simplest stuff.
@@dadsshenanigans9632 If you'd seen some of the ad hawk wiring jobs I've seen people do... It's not a matter of intimidation it's doing it right so not to potentially burn down your home or shop.
Should do a ducati go kart vs snowmobile go kart
I love this thing and I hope it means a lot more 2 stroke content.
yea can never have to much 2 stroke content. And going by there latest builds it kinda seems like they are out of ideas of what to do with the predator/brigs and straton type of engine.
The good ol sound of the Rotax 617cc. My father still has a 92 Mach 1 in very nice condition. The key to starting it is to prime it a few times and when starting it have your hand holding the throttle and blip it from there
Like riding a rocket ship on the outside 🤣🤣🤣🤣🤣 Charles is so descriptive
Crazy story… went to Down Main Street ( restaurant in Washington, NC) this past Saturday night, and got seated and ordered and then walked out to get fresh air with my friend and then came back in and this man (Issac) was sitting at our table and, with a slight bit of confusion, we sat down and decided, screw it, you can eat with us, brother. Never met this man in my life and had no clue who he was. Turns out he was a really good guy and told us about this channel he was involved in. AMAZING CHANNEL. I love cars/trucks/bikes/hp/speed. Good meeting you, Issac. Small world 🌎.
You guys are such a great team. Had me in fits of giggles. That kart is truly a thing of genius and madness.
Improved content by way of more ride time than in some more recent uploads. Keep up the great work!
czcams.com/video/DD3RpEWybII/video.html
4 diodes and a load resistor should be enough to convert your ac to dc with minimal voltage drop. You could also use a lightweight voltage regulator from a racing dirt bike.
Oh Man! Charel's reaction had me ROLL'N LOL!!!!!
A little easier explanation of decibels is, for every 3 decibels, the level of sound doubles. So 123 decibels sounds 2x as loud as 120 decibels.
Beat me to it :)
You could use a silicone bridge rectifier for the fan. Their weight is negligible, and they’re real easy to wire up
czcams.com/video/DD3RpEWybII/video.html
Nothing like the cackle of a two stroke engine thru a big expansion chamber! “The 400 Pounder” sounds awesome!
as a long time watcher and a short time commentor I know you guys get this alot but I gotta say Charles is such a great asset to your team. Love everything you guys do. Thanks for sharing such awesome content.
Always on some beast builds!!! Love the energy y’all now share!!! Keep up the great content!!!
You should consider some sort of deflector just in case the radiator cap or hoses blow. The burn unit is not a fun place.
This thing is shaping up to be GREAT!
Computer fans are AC automobile and 12 volt is DC
That is a true point
You guys are amazing, after all these years you're still producing awesome content! Thanks for the smiles. Sometimes when my day is not the best , not only do you guys share in mechanical joy but also mental happiness, with all sincerity, thank you !
I swear charles is the greatest describer of feelings and addition to this show in the universe
Awesome content as always . This cart build is going great .
You might even have more power with the muffler sence it’s giving it back pressure good job keep up the good work
I'm 61 years used guys remind me of me growing up nice to see you teaching some kids how to do things right stay safe have fun and LOL
I call that, controlled chaos!!!!!! Looks like a lot of fun!!!
I'd like to see a top speed run with this engine before it blows up.
Love these videos. I’m from the north no that engine noise is a normal thing around here lol lots of snowmobiles around my area lol not often see it on a cart tho. Pretty cool guys
czcams.com/video/DD3RpEWybII/video.html
Ya they sound weird without the track noise tho
I love how John holds the piece of metal he’s welding with no gloves
Can't wait to to see this thing truly fly!! Its my favorite build to date
Hey guys love the vids and imagine there being some tires with some grippy tread that thing would be cookin
With the right silencer (stinger) on a 2T pipe, you should get even more power 👌
I've had to do all my welding mods on my truck with flux core wire with a 110 Lincoln and have had no issues with welds breaking. Yes gas would be nice, but my pockets run shallow and I can't afford to buy and keep filling a 300cf size bottle.
" mah goodness" "it's like ridin a rocket ship on the outside"
Please make this quote into some kind of shirt or Hoodie and I'll buy 3
Hell yeah
Would love to see this on pavement
would love to see this thing race against the tillitson race kart on a track to compare lap times
You can really hear it when it gets on the pipe, it's magical 2stroke music 🎵🎵🎶🎶🎵 👍👍👍
Man, i just love Charles!
Hell yeah love the skidoo engine on there.. gonna put one on my lawn mower and probably get myself killed
awesome job on this one. looks and sounds insane. I love it, I just wonder with those tires I wonder maybe try it on an asphalt track or maybe switch to dirt tires
In the 4yrs I've been watching, this is the most fun video yet... Great job guys keep em coming. 👏🏽 👍🏼💪🏽💪🏽
Daddy John and the boys 😂 “He’s not letting me have any fun” lol
Might want to check out replacing the box muffler with a Supertrapp.
Ran them on my 2 strokes and cars for years
They are also a spark arrestor.
Tearing up the the track is cool, burning it down would suck!
Keep having fun!
8:05 There is absolutely nothing wrong with a Gasless Flux Core wirefeed weld. A big gasless bead being weaker than a small tack with a MIG? GIVE ME A BREAK. I'm not sure where this bozo got his welding certificate.
The downsides to flux core? Harder to weld really thin, more sparks, more spatter, and more smoke.
Benefits to flux core? Deeper penetration at the same amperage! MUCH better for welding ourdoors in breezy conditions.
Not to mention more tolerable of less than desirable (read rusty) metal. I've found quality of flux core wire matters as well
Yeah but porus welds for fluid containers.
@@MrTheHillfolk Fair point. Though I'd say that's a pretty minor consideration when building a go-kart.
@@JerryWick Great point. It's no 6011 but it's pretty darn good at cutting through crap!
You guys REALLY need to take that Beast to the drag strip at Busco Beach at the next Mini Mayhem!
"its like ridin' a rocket ship from the outside" Perfect
Not going to lie I thought the smoke on the thumbnail was just 2 stroke smoke! So glad it was just a smoky burnout
Charles - "And that's how clouds are made." Lol!
I liked the way you took the first dB reading from the tip of the pipe and the second one from 8 foot away 👀😂😂
Years ago I had a Polaris 660 three cylinder that put out a lot more HP than your carts engine. I was clocked with me 250 pounds and my friend in the back 320 pounds for traction weight doing a 100 mph on a snowmobile. Now that is moving on a sled.
Nice work on a kart. GO WILD FOR SURE.
"Dude, I was meant to drive this thing." Best quote ever.
FABULOUS explanation!! Its like riding a rocket ship on the outside..
I think we can safely say that the Dust bowl 2022 is in the bag 🤙🏼, I believe if you put some dirt tires on back you could get that front left tire up in the air if not both, Charles described it just as it looks, riding a rocket ship on the outside 😂👍🏼,love it
Love the snowmobile engine content! It's my favorite
Charles your a wild child!! Great job guys !!
im so glad you decided to build a cover. . i was actually scared for you guys when yinz first drove it. . . lol
That thing is a late model go kart! That’s awesome!!! Now I want to build 1!!
Two words, aluminum & welding. The thing is a beast, got to get it on a paved track.
This is amazing y’all hit 1 mil subs I watched in the beginning!
Charles, " Like riding on the outside of a rocketship" loved it!!!
You guys should totally rebuild the rat rod slammed mower and run it around the track
Isaac on the cart with the tire smoke and his thumb up doing a huge burnout should be on a tshirt!
Always fun to see these Go Karts on youtube. They are all awesome. I am really starting to like the 4 wheel drive stuff. The specs are pretty impressive. But, after everything, I keep going back to my semi-stock ZX-10R with 200HP and 384 pounds that will do 200 mph for a good time while being street legal. A bike that can do 108mph in 1st gear is something else.
Mainly, it is due to the journey to the destination and the destination ride. I don't need a truck are anything else. Just a backpack and a wallet. If I go on a hard ride for a 3 day weekend, I better have a new rear tire. I can also just change the destination based on the weather or a phone call. In no way taking away from big kid toys. I want them as well.
I've been waiting for this project's final result since it started. Its as insane as I was hoping for. Awesome!
czcams.com/video/DD3RpEWybII/video.html
The smoke show was great! Pow!!! run away 😆 awesome as always thanks guys
that muffler is gonna be such a top end power killer
Nice fire escape holding up that muffler
Heck yeah something worthwhile to watch!!!
3:29 That's my new alarm sound
I seen those rave valves and i knew something serious happened. Lol love those motors.
love this channel. Great job, great entertainment. You're doing a lot more with much less than others on youtube. Congrats can't wait to see more.
Love the fun content!!
Time for a Pallet Jack scale!!
I am a yankee, and I worked with a guy from the south once. Something I have kind of noticed is, southerners a lot of times dial back the southern accent, but when they get excited, it comes out! "yer bear huggin' that thang. And there's 4 sup-ah-chargers on that rocket ship."
They young guy was ment to drive it. He makes it look fun. I love it.
Equivalent to a 2022 GSXR600 sportbike.. super awesome job guys
Thanks guys. I really needed a snowmobile powered go kart doing burnouts today. 🤘🏻😈🤘🏻
That was a allsome show down .wow 😳 that gocrarts a power house 😁🌟🎉 allsome work guys 🌟🎉 from cruzermans inventions
I couldn't make it through the intro.... John u over did yourself on editing bro.... 👏👏👏👏👏👍😎
Ike has them cat like reflexes catchin that muffler good catch man
Now that's how a go-cart shop floor should look go Issac
Put some knobby tires on the back for the dirt track and see what it can do. Love it thinking of making me one
Mad respect for you guys over there using a Rotax engine
There is no way this man called the primary and secondary cutch’s pulley’s 😂
With that burnout Vice grips garage would be proud of you Ike !!!
Multipurpose kart!! Great for a rip and for knocking down the bumps on your oval track. This thing is a beast fellas!
Ya'll need to get down to the Freedom Factory in Florida. Ol Cleetus would love this thing xD
Good deal. This is a sweet build
This cart is Insane in the membrane!
❤️❤️❤️❤️ I'd love to see the 670 kart -vs- the rat rod cross kart
Cleetus would LOVE this monster! I know I sure do!
Y’all did a good job on that I watch every video/episode❤