Reviving a FORGOTTEN BIG BLOCK Race Go Kart!
Vložit
- čas přidán 17. 08. 2021
- We love racing go karts at CarsandCameras, especially racing karts that have been retired for the track, and are now yard karts. They're low to the ground, handle great, and can take a decent amount of power. We're working on Charles' big block Briggs and Stratton powered yard racing go kart in today's video! It needs TLC, it's not running right, the exhaust is restrictive, and more. Then, we have a John vs. Charles racing showdown around our Dust Bowl 500 racing oval.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
28mm flat slide Mikuni carburetor: bit.ly/3oWSFRJ
RLV racing muffler: bit.ly/3uQxBQD
Header sleeve: bit.ly/37SOlMP
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video. - Auta a dopravní prostředky
It’s big block week at CarsandCameras!
Yo
That thing looks mean
Chas, did ya take the governor out?
Ya know what you guys need for the new shop? A dyno!
We need a revival amd update on the drag rail
Charles is a smart man, just a few times letting off the throttle each lap to make sure John leaves with the win. Job security 🤣
I'm so impressed with how Charles handles himself in the shop...he is very open to accepting criticism and always asks for advice when doing something he's not 100% comfortable doing for the first time on his own...I wish I could find a guy like him in my bathroom remodeling company...its SO dam hard to find a Charles
If you notice, he’s becoming the thumbnail model for C+C too.
Being open to criticism and able to ask for help when needed equals an efficient and safe worker.
I'm from Argentina. Get me to united states and I ll be your charles! Lol
Dude that old generator's happier than a tornado in a trailer park... he's lovin' life!
Is that a mater joke lol jk jk I’m sure anyone would say that too
@@photondebuger45 weeeee hooooo
'm
Nnn
As much as I like you guys, this new kid is a breath of fresh air. Love his enthusiasm and work ethic. Thanks for hiring him on, he is a GREAT addition to the team!!
@NuBz I just want to know if Ike bought his vette
Charles was a great choice and a new team member is just what they needed and the timing is spot on with Ike's busted arm.
Im with you all the way , Nice kid for sure.
"It works as a Bottle opener" Charles "I tried it this morning", roll The Doors, Roadhouse Blues. "Woke up this morning and got myself a Beer"!
I so glad you guys are getting a proper garage. The shack works fine and all but you guys deserve the size of space to be able to work on more than 1 project at a time. You guys rock!!
M,
Charles is awesome. No ego, just all brains and entertainment.
Charles was a great addition. I like what he brings to the table.
I was coming here to comment exactly that. He fits in so well that it feels like he has been part of the team for years.
Is it Bacon?.. does he bring Bacon to the table?
I've been thinking this for as long as he's been on the channel.
Much agreed! :)
I loved seeing John's face when he found out he was faster! I love the friendly competition. I can't wait for Isaak to be healed up as well!
I think you should keep Charles on the team, if he wants to that is, seems like a genuine nice guy!. 👍
He's not going anywhere. I read positive comment about his ever week. Still yet to hear a negative comment tord him.
Just want to take a sec to wish the c and c family a happy kart anniversary. Tomorrow 8/19 marks the 7th anniversary of the 9 reasons to buy a yard kart episode. The one that pretty much started it all. Big shout out to John and Ike. And now congrats to Charles and Peyton also. But we can't forget a few others like early guests Burt and Tobias. John's girlfriend in those early episodes. Also big shout out to Taylor. But most of all ....Jeb Bush.lol
Thanks for the years of entertainment and here is hoping for many more.
Thanks JJ!
those were the days crazy its been that long
Rip Jeb the bush 😔😔
I think they canned Peyton. If not they should.
Charles do you know where that kart came from? Looks like one I raced at Thunder Road in Barre Vermont in the early 90s.
I am so glad to see how Charles is fitting in with the CarsandCamera family. Great addition to the team. 👍
It did change things up in a good way Charles fits right in.
I am too...there is something very relaxing about Charles...easy going & likeable right from the start.
Who else thinks Charles is a great addition to the cars and cameras team?
I’m glad that I’m seeing this. I’ve been thinking the exact same thing. I did not like the dude before
Literally everyone.
I agree with Eggplant, I love John and Issac, but Charles adds a new flavor to the team. His enthusiasm and general disregard for personal safety makes him fun to watch. He also has pretty good camera presence.
Charles An Excellent Addition To Your Team. I Enjoy All The Videos
Charles is the third musqueteer guys...🤘✌🇨🇦👍..loving the vibe.
Charles your doing a great Job, I know those Guys are glad/grateful to have you part of the team. Keep Up the Great Content Cars and Cameras.......... But Be SAFE
This channel is firing on all cylinders right now
Great video guys! New shop is lookin good... John is tough to beat on that track! Hey Charles, luv the Tyranis 🦖 stickers on your kart!
I so happy Charles is apart of the channel keep him around 😎👍
i know i dont know you, but only know you for what i see on camera. But i think everyone these days always needs positive thoughts and some encouragement. But john dude super proud of you for how far you have came with this channel. Old days of the goofy ass dorky john n ike building outa your dads garage ripping up your dads lawn to having your own go kart paradise and having two shops and a great group a friends to help you along the way. Please dont get complacent and dont take them for granted or what you have. Seriously great job for sticking to the channel and pumping out content for us and you guys to enjoy! Thanks man!
Good to see one of Owen's old projects feature in a C&C video. He got a flame-throwing hearse ??? 🤣🤣🤣 #partoftheteam 👍👍
That little red pickup truck is so cool!
I'm so glad Charles has joined the team
Charles and John are my favorites
For years now, you guys have kicked butt, and you just keep putting up great kart stuff, thanks. Charles' kart is the first one set up like an oval racer, very cool. Maybe bank the corners on that oval, just a little.
Charles is awesome to have on this show.
Please...start doing some video of the inside of the new shop & talk about interior plans & layout & such...the shop is the glue that keeps it all together, give her some attention also!
Yeah, they are keeping it kinda secret and I would enjoy the entire concept to the final touches. Are they thinking about a small compressor room for noise or a couple attic fans or lifts for bikes and so on. I personally love planning a project out so you don't regret it later.
I'm 54... learned how to weld in Ag.... my ag shop instructor taught us to say "Cover " when welding..... glad to see you guys using that precaution.....
Those old outlaw karts are fun even in a backyard. I have a old kart that has a stock 212 wish I had enough room to let her rip
Looked great guys. The carburetor was bouncing around. May want to shorten intake or make a carb support
charles fitting in good! knows his place and is not annoying!. Ive been watching for 7 years
We need to see a built 670 or any V twin yard cart!
That would be stupid fast
i love it whenever you guys make or play with these high horse power racing karts and drag karts, its so much fun to watch, love you guys
Good move replacing the carb. As son as I seen it was Nikki, I knew that was the only option! Been there, done that...over and over and over.
Just found you guys about 8 months ago and have enjoyed every video you guys have put out. Kinda partial to the drag rail as that's home for me. Keep up the good work and welcome to Charles!
"I know what to do with my hands"
- Charles
Its crazy to think I've been watching this channel for 7 years😳.. You guys and rather b welding have made my childhood from 12-19. I will always b thankful for your guys.
You guys are the best, Charles is a great great third member.
A good name for that would be *BIG BLOCK BERTHA* !
I love all the Briggs and Stratton content! Great job guys, I’m loving all the variety in the content
Guys, If shipping was not so costly to New Zealand would have had a hat and tee shirt a long time ago. this is the best channel out there in this kind of format,Im coming up 65 and totally love this channel and Ike's channel also.
You guys are awesome! You've come a long way from doing speed runs up and down that little neighborhood street!
That trick kart frame has seen some better days. We raced them for years. Super tough. Still got spindles and parts for them in the race trailer.
I run a newer Trick, it is fast.
Right on time! For my first time ever!
Congrats on the new building. Long time coming!
Turn the old shop into your painting booth! That way you won't get painting in the new shop when coating your projects 👍. Keep up the good work boys! I'm always eager to Monday's and Wednesdays to arrive. Makes my evenings!
Damn yall need a few pair of these ... it Rips!
I can't explain at all in any words how much im looking forward to all the fab tools to be in one spot. Bender and notcher at ikes. Plasma table at John's. The new shop will be awesome guys
That thing absolutely rips, even with the smooth tread.
That thing is awesome. Man that carb done the trick. I'd love to see it on a bigger track and even a top speed run. That made my night right there. Yeah the new guy should stick around. He seems to know a pretty good bit and would make a good edition to the team.
It is so much fun watching Charles with this team. I have always loved Ike and John, but man having Charles around is so awesome. Quickly becoming a favorite!
That was a BIG new shop, can't wait for the walk around
Hell yeah chuck gets his personal kart fixed!!!!
Kart looks so natural on that track
Carb just flaps in the wind, needs a bracket.
I seen that
That kart is a true hot rod! Man, that looks like so much fun! 🇺🇸
Charles is a good guy.....they made the right decision on adding him to the C&C team
Nice new shop !! The new headquarters !! Can’t wait to see you guys move in !
New shop looks great guys, you deserve all those blessing and im sure the builds will get better with the shop upgrade...
You answered my question about the bottle opener..Im impressed, Thank you!!
Ike is such a supportive, patient, and all around great mentor.
Bigger shop this means more projects can't wait guys . Charles needs revenge beat on his own kart lol
oh yeah. the olde charles vs john. nice episode fellas.
Dang Charles welds look pretty good
Wait a minute we need to see the snow mobile powered go cart. We gotta talk about chronological order here bobby.
2 things on this mini track, would love to see a small pit garage, when carb needs fixing you could pull it into the on track pit garage, with viewing box up top. Also, would love to see ya guys build a couple slow carts for bumper racing around the track. Great Vids guys. Charles is a good addition.
Awsome. I love old race karts
You can almost never reuse them gaskets in those carbs, they always rip, or at least leak when reassembling them. Love the vid!
I really like the oval track episodes. 👍🏼👍🏼
You fellas r just living the dream!!👊✊💨💨💨👍
I joined youtube in 2012 and im pretty sure this was one of my first subbed channels. Crazy how far you guys have come since the og garage and tiny work area.
They need 2 more of thoes.. a build off between John an Issac.. having a race with all 3 would be super cool an fun to watch
Like the pro-racing move, having a bigger wheel on the side taking the most stress.
can’t freaking wait to see more of the circle track ! y’all should make a board of times for it!
That Cart is fast as the day is long , great video boys
Man I think that plasma cutter is the best investment y’all have ever made!!! 😁😁😁
Love the revival it run great and it moves
Ahh!!! 😏I thought for sure it was going to be the black widow!!!! The best big block cart ever !!!! I think she needs some love maybe a bigger back wheel and tire and it could play again.
Still yet to see a negative comment about Charles in the comments. Everyone loves him. Perfect timing. You guys getting old in a way and needed some young motivation in the shop.
Im Proud for Yal.. from where yal Came from to Where yal are going. Its amazing the growth. The new shop looks awesome!
So glad to see you guys, love your videos
Slo-mo drifting shots are the best.
Great video guys! You inspire to build. Its wonderful
So my son just showed this to me to get me on board in reviving his old go cart. It's on! Thanks guys
Love the zip-tie sheetmetal work.
The video was great can't water to see ike racing with you guy's
Cool cart Charles 👍 Good stuff guys.
Sure am looking forward to sir Ike to be back in the saddle.
You gotta paint that Sidewinder in a snake skin pattern!
John jumped the start. That was the difference in time.
Hey guys love the content!
The new shop is going to be great.
That thing is a beast when it's running right!
the way that carb was jumping around! intake manifold break in 3.2.1!
You guys should do a drift bike or kart with a hand brake for skids 😎
Got my pins order placed, you guys do great work and it shows how much you love what you do, good on you for making your own path
That things a beast when it was running right towards the end!!
Put a turbo on it. So it goes vroom vroom fast.
Just an FYI... Those jets are not molded in and can be removed. They can be difficult to push out due to crud packed around in between the plastic and the jet, but you can get them out. I work on mowers and generators for a living and see those carbs all the time. Great vid keep up the good work!
love the undercover work there lol