STIHL Man Runs ECHO & Husqvarna FOR FIRST TIME - 545 562XP 620P
Vložit
- čas přidán 10. 09. 2024
- #stihl #husqvarna #chainsaw @ECHOTools @echousa
Today is special Show where we got to Collaborate with Mike @TheRustyGarageandHomestead . It was a super fun time and he is a great guy full of knowledge, tips and information! I look forward to working with him again in the future. Make sure you check is channel out if you have not been there yet.
LINK HERE To Rusty Garage and Homestead - / @therustygarageandhome...
--------------------------
Amazon Links for best pricing:
-Oregon VersaCut Aluminum Core Light Bar: amzn.to/49qgZCF
-Oregon EXL Chain: amzn.to/3wgoQV1
-Husqvarna Technical Chaps: amzn.to/3S9M7AB
-Husqvarna Functions Helmet: amzn.to/3NZ3rpk
- Hour Meter: amzn.to/3JsRSEl
- 3M WorkTunes (sells 6k+ per month) - amzn.to/4aM7aQg
- LogOx Firewood Tool: amzn.to/3SCJWWE
- Woodchuck Hookeroon : amzn.to/49AhgTh
As an Amazon Associate I earn from qualifying purchases. We will provide relevant links above or below.
Buy Me A Coffee: www.buymeacoff...
One of the best ways to support the channel is watch the video and coment letting us all know you are here. Don’t forget to hit Thumbs Up and if you find the content helpful or entertaining, please share with your friends and family via text, email, Social Media and by word!
We thank you as a family for the support!
-------------
Beautiful place mike has. Refreshing to see a person who's loyal to a brand but not blinded by it😅👍🏻
Hey Aaron. I love my Stihls. They have worked great for me. I'm excited to get a husky saw now and start using it. They sure where a pleasure to run
You are 100% correct AP!
This was a fun video that ported CS-620PW really rips, I have a CS-600P and a CS-620P I did a muffler mod to the 600 now it behaves like the 620 the both rip. Have a great Memorial Day weekend
You as well! Thank you for watching and taking the time to share once again!
Very cool that he's so close to you. He seems like a really nice guy. Humble and down to earth.
He is super nice and full of mechanical knowledge. Great guy to be able to spend some time with.
Nice job, boys. Two fine gentlemen right here. I caught onto Mike channel real quick. He's a stand-up to the point guy.
This was a fun day! I am excited to see his content. I learned a BIG lesson while I was there and think that will be one of the first videos he posts!
Hey Mr Kenny. Thank You.
@@oakiewoodsman Mike knows his stuff.
You got that right
Awesome video!!
I have 4 tanks now on the novice lumberjack’s cs590 with 620 piston and it’s very strong.
Awesome! I cannot wait to see it. It is quite a bit more strong than your other? Did he just muffler mod it or do you have your pipe on it? Cannot wait to hear some more!
I have Sugi and Tsumura light bars and both are excellent! 110 bucks shipped for a 24in tsumura is a excellent deal from Eric Weakland! Ive got 4 Stihls 5 Huskys and i pick up the Huskys the most just because of the smoothness and less vibration! My white knuckle hands tell me they are the best far as vibration. My Echo rarely gets used just because in no time my hands are numb! Good stuff gentleman and see ya next time!
Thank you for sharing where you are getting your bars and you experience with them. I have also heard good things about them. I believe that the Stihl Light bars are a bit lighter than the two Japanese light bars. Please let me know if that is wrong. I know that Tsumura (i think) has those very light bars that are more comparable in weight to the STIHL light bars but are far more flexible. I want to say that I saw that on Mitchells Backyard Logging.
I totally get it about the smooth factor! Today when I was cutting I had the 460 out and the 562. I did not intend on running the 562 for much other than marking the firewood lengths because it had the laser on it. Well, I just couldn't help myself. In the Firewood pile, the 562 was so excellent in the 12" wood. I liked running the 460 but was drawn back to the 562XP.
Thank you again Ted!
@@oakiewoodsman That 460 is a great saw. Hard choices for you Mr Joe. Your are surrounded by great saw's
The problem is when you want to add more 😂
@@oakiewoodsman The Stihl light bars are a tad lighter but way too spendy for me!
@@tedneitzel gotcha. Anything would be an upgrade for me I would think.
I have an old Husky 51 that its longevity sold me on the brand. I bought a 585 last year for milling and just recently bought a 562. LOOOOOOVE IT!!! Being from and living in North Carolina, they know nothing about full wrap handles but I ordered one for each and it’s a total game changer. I’m a lefty and it definitely gives you more options to hold onto than a stock handle. I also bought a 28” bar and that’62 pulls it with ease. It’s great for bucking when you have a trashed lower back. I also have a 24” for it to for general felling. I’m not a pro tree guy, but I inherited our family farm of 56 acres and it’s been in the family for close to 200 years (190 to be exact) and I have a bunch of big pines that are begging to be turned into slabs and used to build a barn with. I haven’t run an Echo and have a Stihl weed eater that I really love. It’s a great machine but the guy at my local Saw shop went to school with my son and hooked me up on a really great deal on that 585 ( $1100 out the door) and an equally great deal on the 562. They have a 395 that’s calling my name as well. I see another orange saw in my future 😂🤣. Much love to y’all from across the country and you fellas be safe out there. God Bless🤙🤙
I sure appreciate you watching and being here. Also, it sounds as if you have had some really cool circumstances between the property and the saws to maintain it! You sure have a good lineup. I have heard that many people say the 585/592 are actually worthy of taking over the 395s place so you have a very good line up. Over where you are at, you should have some Loblolly pines right? The pines at my location are Short leaf and are a tad different. A little bit slower growing and more fire resistant. Do you have a sawmill yet or are you just chainsaw milling?
@@oakiewoodsman Roger that on the Loblolly’s. I have some big ones out there. There’s a 10 acre spot that’s been untouched for At least my Dads lifetime ( almost 80 years). At the moment, I am just Alaska milling it but I have a set of plans for a gas powered mill and I have been a welder and fabricator for 20+ years. I missed out on a really great deal for one that had been sitting for a few years and needed some carb work and general TLC. All in due time. I’m not in a rush. I just enjoy the process. You can fire up a saw and forget about all the woke BS going on and do Man stuff. And trying to pass on the knowledge that I have gained over the years to my grandchildren. And that 585 is no slouch. I don’t know what would be gained by 7 more CC’s , but I’m probably going to try and find out 🤣😂. I used to be really bad off on pain pills, I have about 12 years sober and I guess now, instead of investing in more pills, I have traded one addiction for another 😉. I can definitely think of worse things to piss my money away on. Going to try and do a pipe mod for both newer saws soon. My 51 will stay like it is until it loses compression and then I might upgrade it as well. I would definitely recommend a full wrap bar for that 62. Gives you a lot more flexibility. I’m definitely sold on that particular west coast vibe. Hoping you folks stay safe during this stormy time of year out there. It’s getting ready to be Hurricane season here in NC so I’ll be ready with at least 5 gallons of mix gas and and a handful of chains for each saw to get out and help if the need arises. And I know about shorleaf pines as well. We have a few around here but they aren’t usually the norm, just the exception. Much love to you folks🤙🤙
Excellent news on being sober! Thank you for taking the time to share and I would love to hear about your experiences with the mods and the sawmill when you get it done. I sincerely appreciate you writing all of that out. It is sometimes nice to step away from the cares of the world. The weather has been particularly volatile here this Spring and since I have been here, I would say the most damage has occurred in a relatively close proximity. Thank you again and you be safe as well!
I'd really like a 545 for Christmas 🎄
try the 550xp first, same size same weight but more power and chain speed I love mine and Im a stihl guy
I picked the 545 over the 550 just because I didn't like the high revs coming from the 550. The new 562 mark ll is also something I'd love to own.
hahahaha.... that would be a good gift Mike!
@hillcresthayfarms9664, I have never run one but I had a bit of concern with the saw being pushed a little too far for the bearings and stuff. I know many like them really well. I kinda had the same thought as Kenny @OpenAirAdventure. Thank you!
I enjoyed this one guys👍🏻
I appreciate you watching Doug. He sure likes them bars buddy.
Nice work Gentlemen 👍👍. Yeah I'm with you Oakie - if I was going to start over I'd run Stihl light weight bars on all my saws with an adaptor. Good news for you Mike - when you get your 1st Husky large mount saw (H572 hint hint wink wink) you can adapt all your Stihl bars over...
I think the 572 would be a great saw for him since he has the 660 clone that runs fairly strong from what I have seen. I meant to run it while I was there..... but forgot and got busy. He could certainly make some use of the 572 without a doubt. He has a ton of Firewood cutting on his property with blow downs and dead standing hardwood. Thank you for being here once
I think you are right. The 572's look awsome. Maybe i just need to get a 572, 545, & a 395xp lol
@@TheRustyGarageandHomestead now you're talking like a true chainsaw addict like the rest of us 🤣🤣
Great video I love my Artur Rodak Ported 550XP so much so that I really only run that and my MS462. It has taken away the need for my 60-65cc saws.
Are you from the states and got Artur to build a saw? Yeah, he knows his stuff.
Thank you PV for sharing. I believe you have told me before that your 550 was ported but I had forgotten. I have not heard this particular name before but apparently Indiana Doug has. Thank you for watching and sharing once again sir!
@@oakiewoodsman Artur is one of only a few people doing good port work in the country. I am glad his reputation has reached the US.
@@patrickvennard838 that is awesome! no regulatory issues over there?
@@IndianaDoug Hi I live in the UK and you are right he knows his stuff.
👍👍👍 nice place!
Good saw review.
Thank you for watching CF!
👍👍
I've owned Stihl and Husky saws over the years but at 74
Years old I needed a saw with
Low weight and lower. The
Husky 550 xp mark 11 is the
Answer. Try one you'll like it.
Power not lower.oops😮
I would love to try one out for sure. It seems as if the Mark ii versions of their saws are generally pretty good versions and they have worked out the trouble spots. I really enjoy my 545 and have heard the 550 is even better. Thank you for watching and taking the time to share your experience. I know Mike sure liked running them!
🤙🏻😎
👊
Right on buddy. Thanks for stopping by!
Also i tend to run longer bars than most, much easier on the lower back not having to bend over....I also have a long bar on my 50cc Husky, skip tooth on small cc with long bars y'all if your saw needs it
Appreciated. 28” is about perfect for me but I have run a 32 for the ultimate stand up and buck setup. Definitely would like some lights bars for that however.
I like stihl light bars better then the cannon myself the cannon are an over priced laser bar to me i had 2 bent the tip first time out there way more flimsy then stihl bars some people say the stihl bars chip worse but ive not had any problems
Ah! I appreciate you sharing this info Mr Mitchell! I have ZERO experience with the Cannon bars so I thank you. This will prove useful information for Mike and I both. Thank you for watching and chiming in.
That is great information. Thanks you for it
No problem some have told me the cannon bars are better but for the money there really not better
Wes, makes total sense!
Im both, Stihl & Husky man, Id like to put my 76cc 372XPW & my 99cc 2100XP in his hands, also my 440 magnum, all pro grade saws. Srihl has more low end torque, husky more of a top end screamer
Thank you for watching and sharing. I would love to run those saws myself! 440 and 372 are two super great saws. I know very little about the 2100 but I have a friend with one. It isn’t running at the moment.
1st
I slept in 🤪
I watch the real okie
@@toddcaskey9984 lol mornin Mr Todd
hahahah!
hahahah.
My 7310 is husky mount, it's ported as well but it is heavier. I still use my ported 620pw and honestly the 501p ported is my favorite saw it just so nice and light and balances. The onky downside to my 620p is it sure does drink fuel and red armour isn't cheap but man is it the best oil
Do you think that the 7310 uses less fuel then? Thanks for sharing again!
@@oakiewoodsman bigger tanks so hard to say. I use the 7310 for milling so the port and muffler mod are geared towards that vs pure power. My 620p from what I see in the video is much more agreessive of port than what yours is. I got nine done by donny walker who's pretty experienced. The 7310 have the best filter on the market so with milling it's a pretty nice feature since you are making so much fine dust
I have heard that the 7310 has a great filter setup. My 620 is likely to get a bit spicier because I have new jug coming my way at some point. I really want to try a 7310!
@@oakiewoodsman it's a nice saw for sure very happy with it, and your 620 can get way spicier haha. I'm not sure what walker did to mine but it's a monster. But like I said she drink the fuel. Also I have mine all tuned for 32:1
@@oakiewoodsman also I do run av gas in mine since here in Ontario everything has ethanol in it
Morning
Good morning! Thank you for being here again. I Hope your enjoyed your rest. You and I worth both oblivious to the world when this posted.
👍🆙OW
Thank you buddy. The Storms were SUPER BAD just south of me again last night. Dang man. How did you fair this time?
@@oakiewoodsman nothing here 🤞 hopefully get the🌳down tomorrow... and then let the fun begin!
Yes sir! Claremore OK got super messed up man.
🤞no wind 4 a few days
💯