How to Install the Cadet 3 Toilet by American Standard
Vložit
- čas přidán 6. 01. 2019
- For a classically styled toilet with an air of simplicity, the Cadet 3 Toilet by American Standard is an excellent choice. A powerful flushing system provides exceptional performance, while our lower flow rate options can help to save water when compared to a standard toilet. Follow along with this video for step-by-step installation instructions and tips, to help make installing the toilet easy.
Learn more about the Cadet Suite: www.americanstandard-us.com/b... - Jak na to + styl
Dude the song is sick as hell on this install video!
Literally had no idea it was that simple to install a toilet! Thank you so much for the video!
Now, please do a toilet seat change out on the skirted version. How in the world does that work!?
Nice unit.thanks for making it in a 10 inch to bolt up.have a small older home and a 12 wouldn't work.it just made it and .white and round.perfect.strong flush.great.
I have the original cadet 3. Works like a champ. Just installed a new fill valve and it works amazing. American standard stop putting fluidmasters in your toilets and put korkys in. It's a perfect combo
How does one tighten up a loose seat on skirted cadet 3?!?!
My toliet appears to be 11.5" - will the 12' still work?
You could bring back the older toilets from the 50s, and allow them to use 1.25 gallons.
I don't understand 1:34. Where does that part go that was on the bottom of the screw
My American Standard toilet didn't come with the rubber gasket or metal washers for the toilet seat. Called the company and they were very unhelpful. Now my toilet seat slides around. Thank you very much American Standard.
I'm having the same issue. No washers or the rubber gasket and no help from the company. It sucks.
@@cowboyfan0786 I know. American Standard needs to improve.
@@a4e69636b One could say they're setting the...American standard. *badum tsss*
Mine came without any gaskets for the tank so it leaked immediately. Trash
@@ryans4633 What is happening to American Standard? They use to be so good with their products. Thank you for the info.
Je ne sais pas comment arrêter l'eau du réservoir de couler . Une idée s.v.p. Merci
I just got the round one and I’m installing it Friday I used to be a kohler person but their quality has dropped like a rock so it’s American Standard or nothing
Just installed a couple of Cadet 3 Dual Flush - great toilets! The one in our en-suite bathroom makes a loud filling noise every few hours- only lasts about 30 seconds but enough to cause an annoyance in the middle of the night. Any ideas?
Hello Ian - We are glad to hear that you are liking your new Cadet 3 Dual Flush toilets! We recommend giving us a call about the filling noise you are hearing so we can troubleshoot your issue. It sounds like your fill valve or flush valve seal may need replacing. Thanks!
Thanks for not including any gaskets for my tank bolts. Guess I’ll go to Home Depot and buy some myself so my 1 day old toilet stops leaking from the tanks. Good times.
I just installed this toilet. The tank to bowl screws are slowly leaking! I replaced the gasket with a regular washer style but that didn't help. I think it is the design of American standard gasket that slips through the bolt that is not working.
My initial install, one bolt was fine, but one leaked. Now it's both! I've hand tightened pretty tightly, but it's still leaking. Any suggestions?? Is this covered under the 5 year warranty.
Hello Hoang - We are sorry about the inconvenience you are experiencing! This type of leak is certainly not normal, and we recommend reviewing all of the installation details included in the instructions provided with your Cadet 3 to troubleshoot. If you are still experiencing issues, please reach out to our Consumer Connection team for additional support at (800) 442-1902. Thanks!
Where do you get that tool to tighten the plastic screws?
Hi Maria - The EZ install tools come with the EZ install tank to bowl kit and are not available as individual parts for purchase.
What size wax ring do you need for this?
Hi There - The wax ring is 4.84 inches in diameter. Thanks!
I have the Cadet 3 with the flush covered sides. Any difference in installation?
Hello Ryan - When installing one of the skirted design toilets, be sure to note where the water supply line is located. If the skirt interferes, relocation of the valve is required. Please also be sure to install the top mount seat supplied with the toilet as not all seats will fit properly. You can view skirted toilet installation example here: czcams.com/video/LebANJC2rx4/video.html Thanks!
@@americanstandard Thanks for the info. Btw I installed the toilet this past weekend with no too many difficulties other than you should let the cust know that they need a 20" water line because of the height difference. I didn't realize till after the bottom was situated and could not be moved which made it really hard to change the line with the toilet in the way. Installed now and works like a charm
Why is the underside of the toilet bowl rim left "unfinished/unglazed" on the Cadet-3 Powerwash toilet?
they glaze the parts of the toilet that will be showing for aesthetics but the underside of the rim is not visible so there is no reason to glaze it
@@ILVT_Plumbing Seems more like a cost cutting measure to me.
@@davidh7339 that too probably
Got a Cadet ordered for my small "alley" house. This model high recommendation's from friend's.
Hello. I have very large poops. Does this accommodate slightly larger (yet human-sized) levels of poop? I would say I poop as much as a NFL linebacker after eating a large Thanksgiving dinner. Some have compared it to the size of a mid-sized black bear. Anyway, thank you. God bless American Standard Toilet.
This video is NOT of the Cadet3 with the wrap around skirt! The design of the Cadet3 make it such a pain to access the the flange bolts. 😠😡🤬
Having long arms help me reach around to access the plastic nuts, but to actually tightening them enough, that's another story.
While this over all design would seem perfect for a small space, reaching around it not always possible if it is too close to the wall. Then the small access hole for the flange bolt on the side is more a medieval instrument of torture than a convenience design feature.
These are horrible I rather the 2000 version better