Thank you for stopping by and watching our video. We hope it helped you out. If you need a brand new painted bumper, Where to buy: bit.ly/16ElantraFrBumper If you need any other painted car parts, Visit us at : www.revemoto.com
Thank you for watching. I will drop the link for our bumper below. We also have 2 other videos on installing the bumper and changing out the grilles. Take care! bit.ly/16ElantraFrBumper
Worth a thumbs up… since I have a 2016 Elantra that I’m getting ready to replace the front and rear bumper covers! Door dashing all winter in Alaska has left its signature on the car and I want to fix it myself. Question- do you have a list or link of the body panel clips (sizes) and locations, I’ve already bought one universal kit(?), I can now fix a bunch of other kinds of cars, I just need some stuff for my Elantra now! Thanks for the video, I’ll be watching your channel religiously
Thanks Robert! For body parts go to www.Revemoto.com. The universal clip kit is what I would of recommended. The bolts I would just get 10mm at your local auto store or if you want the cheaper online like eBay. Other than that I am not sure about the other misc clips but I would just get those unique ones at the dealership
Hey man what is the part with the Hyundai emblem attatched to the bumper called? It was missing when I purchase a new bumper, so I need to buy a new one but don’t know what it’s called. Thank you 🙏🏾
Appreciate it good sir. If you need the bumper you can get it at www.ReveMoto.com. Tell all your friend and family we would really appreciate it. Let me know if you have any questions
Having an extra person always helps but it's not required. If you can clip on under the headlights (start with the middle, then to the sides) it will usually stay put. Then just insert the top bolts/clips to hold the bumper. Then snap it in under the fender and start inserting the bolts/clips. Thank you for watching!
Hello, and great question. The covers pretty much work the same way as the fog light brackets. So, you just have to unplug the fog lights and disconnect the brackets or transfer them to the new bumper. It's usually a couple screws on the brackets. Thank you for watching!
Hello! Yes, a lot of vehicles will come with the wires on the harness even if you did not buy the car with those options. Please double check with the Elantra forums but they are most like for the fog lights. You'll just need to get the lights, brackets and bezel for the fog lights. It's a pretty easy install. Thank you for watching!
Hi Kenneth! No you don’t have to take the whole bumper off. It will just be easier since you can put the bumper on a stand. The way I will tell you you have to be under the car. So you will have to take the fender liner off not the whole thing, but just underneath the bumper. Locate the fog light and it should be 2-3 screws you have to take off and unplug harness. Then you can just put the new one on doing the reverse of what you just did.
You can follow the link here for the part. bit.ly/16ElantraFrBumper The labor to replace a part is usually around $150 or $50-90 an hour for 2-3 hours depending on a lot, but that's the average. Thank you for watching!
Hello Thomas. We are located in Houston, Texas. If you are in town, just give us a call. A standard replacement is around $150 and up, depending on the severity of the accident and the technician doing the labor. Please let us know if you have any more questions. If you are looking for a bumper, check the links above.
@@clintonwalls3642 No one asked and no one cares. This isn’t your GM job and it isn’t a GM car either. Everyone understood what he meant…everyone except you, apparently.
Thank you for stopping by and watching our video. We hope it helped you out.
If you need a brand new painted bumper,
Where to buy: bit.ly/16ElantraFrBumper
If you need any other painted car parts,
Visit us at : www.revemoto.com
DUDE, THANK YOU!! REPLACING MINE THIS MONTH FINALLY!!
Thank you for watching. I will drop the link for our bumper below. We also have 2 other videos on installing the bumper and changing out the grilles. Take care! bit.ly/16ElantraFrBumper
Thanks, I need to add some aftermarket fog lights and this video is a huge help.
Glad it helped. The fog lights give it such a cool look!
The tutorial is very much appreciated, I am currently doing this exact project and wouldn't have succeeded without this.
Just the level of detail I needed. Thanks
Awesome! So glad it helped. Go to www.ReveMoto.com if you need any parts
This was so helpful. Very well explained and very easy to see the stuff we need to reach. Thanks!
So glad to hear it and thank you for watching. Please subscribe if you haven't, it helps us a ton! 😃
Thank you, appreciate your help!
Thank u a ton, I'ma go fix my brothers front bumper, he just bought and scraped it really bad
Thank you! Anyone can do this job with a few tools determination. Good luck.
Thank you brotherin
Thank you so much for this video, brother!
Glad it was helpful!
Looks pretty easy! Thanks for the vid!
It is! Anyone can do this. Thanks for watching.
Worth a thumbs up… since I have a 2016 Elantra that I’m getting ready to replace the front and rear bumper covers! Door dashing all winter in Alaska has left its signature on the car and I want to fix it myself. Question- do you have a list or link of the body panel clips (sizes) and locations, I’ve already bought one universal kit(?), I can now fix a bunch of other kinds of cars, I just need some stuff for my Elantra now! Thanks for the video, I’ll be watching your channel religiously
Thanks Robert! For body parts go to www.Revemoto.com. The universal clip kit is what I would of recommended. The bolts I would just get 10mm at your local auto store or if you want the cheaper online like eBay. Other than that I am not sure about the other misc clips but I would just get those unique ones at the dealership
Thank you
Thanks!
Thank you for watching!
Hey man what is the part with the Hyundai emblem attatched to the bumper called? It was missing when I purchase a new bumper, so I need to buy a new one but don’t know what it’s called. Thank you 🙏🏾
Oh just tell them upper grille or contact www.ReveMoto.com. They can help
Merci beaucoup!
avec plaisir
Thanks,very helpful and simple really!!
Glad you think so!
thank you great video
Appreciate it good sir. If you need the bumper you can get it at www.ReveMoto.com. Tell all your friend and family we would really appreciate it. Let me know if you have any questions
I need to replace the plastic piece you were unscrewing in the beginning do you know the exact name of it / part number?
Hello Jon! I believe that is referred to as the engine splash shield, or lower engine cover. Thank you for watching!
Would it required two people putting it back on
Having an extra person always helps but it's not required. If you can clip on under the headlights (start with the middle, then to the sides) it will usually stay put. Then just insert the top bolts/clips to hold the bumper. Then snap it in under the fender and start inserting the bolts/clips. Thank you for watching!
Thank you. Will subscribe.
Thank you, it really means a lot!
Good stuff 👍🏻
Thank you for the support!
Do I need to do anything extra when I have fog lights?
Hello, and great question. The covers pretty much work the same way as the fog light brackets. So, you just have to unplug the fog lights and disconnect the brackets or transfer them to the new bumper. It's usually a couple screws on the brackets. Thank you for watching!
Can you please do 2018 front bumper with LED lights?
If we can get in the door, we'd love to do it!
Is that pre-installed wiring for fog lights?
I have been wondering if these cars come with pre-installed wiring even if they came without fog lights from the factory
Hello! Yes, a lot of vehicles will come with the wires on the harness even if you did not buy the car with those options. Please double check with the Elantra forums but they are most like for the fog lights. You'll just need to get the lights, brackets and bezel for the fog lights. It's a pretty easy install. Thank you for watching!
I'm trying to replace a fog light can I just do one side of the bumper do I have to hook pull the whole bumper off to change the assembly
Hi Kenneth! No you don’t have to take the whole bumper off. It will just be easier since you can put the bumper on a stand. The way I will tell you you have to be under the car. So you will have to take the fender liner off not the whole thing, but just underneath the bumper. Locate the fog light and it should be 2-3 screws you have to take off and unplug harness. Then you can just put the new one on doing the reverse of what you just did.
@@ReveMoto thanks I'll get that a try
@@BleedCubbieBlue77 Awesome let me know if you run into any issues
@@ReveMoto for the life me googled can't find what size screw is needed to fasten fog light assembly
How much does it cost to replace
You can follow the link here for the part. bit.ly/16ElantraFrBumper
The labor to replace a part is usually around $150 or $50-90 an hour for 2-3 hours depending on a lot, but that's the average. Thank you for watching!
Can somebody please help me. I found a cheap 2015 front bumper but I have a 2013. Will it fit.
If you have the Elantra GT (Hatchback) then yes. But, if you have the Elantra (Sedan) then no. If you want it pre-painted, check out revemoto.com
@@ReveMoto Thanks for your help my friend, would the hood of the 2015 work on the 2013 thought ?
@@Pesopalabra Yes it wll
How much it cost if bring my car to you to replace?
Hello Thomas. We are located in Houston, Texas. If you are in town, just give us a call. A standard replacement is around $150 and up, depending on the severity of the accident and the technician doing the labor. Please let us know if you have any more questions. If you are looking for a bumper, check the links above.
@@ReveMotolol, but I am in LA, but I would like to move to Houston. Let’s see though
@@thomasbruno364 Everyone's welcomed in Houston. We'll be here!
It's called a ( front ) fascia, not a bumper.
Hi Clinton, in the United States that part is called the bumper.
Yeah the U.S calls these a front bumper 😂
@@ReveMoto I worked in a sequencing house for 16 years sequencing front and rear FASCIAS not bumpers for General Motors.
@@clintonwalls3642
No one asked and no one cares. This isn’t your GM job and it isn’t a GM car either. Everyone understood what he meant…everyone except you, apparently.
@@throwaway5926 and bumpers were made from metal little boy. Chrome bumpers!!!