How To Make Fast Charging Station
Vložit
- čas přidán 11. 07. 2020
- Hello friends, In this video you will get the procedure to make a fast charging station using 12v power supply. Simple follow all the step and make your own fast charger station.
Connection diagram : easytechlearn.com/2020/07/12/h...
Share, Support, Subscribe!!!
Subscribe: goo.gl/WfYhoR
CZcams: / easytechzone
Twitter: / easytechzone
Facebook: / easytechzones
Instagram: / easytechzones
Google Plus: plus.google.com/b/10610497788...
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Track: TonyZ - Road So Far [NCN Release]
Music provided by NoCopyrightNation
Watch: • TonyZ - Road So Far (I...
Stream/Download: NCN.lnk.to/RoadsoFar
----------- - Věda a technologie
Do you realize that each of the sockets will charge the device with only 0.5A. No usb middle rises connected
I was thinking the same thing lol
Hi I could not understand your question? Did you mean that 0.5A for each usb is not sufficient? I do not have the answer to your question as I am a beginner and I am trying to understand your question.
I knew nothing about fast charge till I watched this video👍👍
Well...after this video you know less. If you have more than 2 ports connected your phone wont be charged in 4x the amount it did before. 2 ports...about normal. 1 port...then it's a fast charger
The way you have the USB connections are wrong. You have to put a resistant on the two data prongs to make it a fast charger for 5v. If you don't do that your phone will only charge at 350-550 milliamps and not 2 amps as most phones require at least 1.2amps to charge.
Im crying what is that, are you serious. You have no usb controller for fast charge 😢
Excellent Demonstration.Good for making school projects also.
czcams.com/video/XpxoFkLgy0M/video.html
How to made fast charger smart phone
* first step go to accessories shop
* second choose the charger wht u want use for
* third step go to the casher make payment
* last step there u have it
Fast charging charger smartphone
The end...
Thank me later 😑
Cheap alternative
But the thrill of making a working project is missing
Shut up
Good project 👍😊
Now realy need this one
Next day 😊 iam going to make one👍👍✌️thanks bro
Ok
czcams.com/video/XpxoFkLgy0M/video.html
@@easytechzones he commented something great an you just replied OK??? THAT IS RUDE!
@@easytechzones bhai Jan ye Sara saman khn se milega
@@easytechzones plz guide me
Thanks Bro.. but which of the DC-DC buck converter you used ? also pl. make a video on making quick charger 3.0 using IP5328P Dual USB ( with type-c ) module...please
Advance Rip in your mobile 😂😂😂😂
Like! I collected such for myself more than a year ago on 5 ports (power supply unit 5A). Only on usb it is necessary to solder average contacts data + and data-, or to solder resistors (depending on what phone) that the charge current was 1 and more amper, instead of 500 mA as in this case as the phone considers that connected to the personal computer, not to the charging device.
Because it needs a charging protocol charger + and - and TX and RX pins need to be connected to an charging ic if else your phone won't charge if charging it's not charging it's damaging the charge protection and charge ic in your phone which leads to replacement of an ic mostly they won't replace ic instead motherboard needed to be replaced
You are absolut Right! But, how can i make this only with 5V y 4Amperes? Do you know?
@@suiyen ebay buck boost converter , cost 10 bucks. 6-40v in --1.2-35 v out at 20 amps. 300w CC CV
I am a long time subscriber of all your projects , super friend tks
czcams.com/video/XpxoFkLgy0M/video.html
welcome to the smoking phone. Rest In Peace phone
ㅋㅋ'ㅋㅋㅋ
Excellent presentation.thanks
Nice video but instead of music if u will explain the parts, where to join and from where to buy, your video will be more interesting..
best of luck my dear bro in youtube you have great idea
Thankyou 🙏
czcams.com/video/XpxoFkLgy0M/video.html
What about the USB data pins - if these are left unconnected, most devices will assume it is a very low power supply and either charge at 0.5A, or refuse to charge at all.
Also most double sided tape & hotmelt glue is far from secure when it comes to mains powered devices (& $1000+ phones)
There's no way it can work properly as shown, let alone as a fast charger. At a minimum the data pins need shorting together and last time I checked glue is not a conductor 🙂 Then those buck converters are not the right tool for the job (even in the video you can see the voltages are all over the place and risk frying your device). There's also some pretty major safety fails, for example not even heat shrink covering the mains solder connections meaning one loose wire inside could kill you or your devices (the boards that get hot are held together with hot melt glue FFS which is just stupid and likely to kill someone if it's knocked and comes loose)! Seriously folks, don't try and build something like this, like that. At best it won't work properly, at worst you'll kill someone.
What a project!!
Great Work! love it!
Thankyou
@@easytechzones wkskjsj
👍djddj to get a good morning ma'am please see the attached screenshot for the prayers
This is okay for small 5v uses or its kind of okay for features phones not smart phones because those buck converters are not efficient in more than 1 ampere so it's not practically good.
A fast charger can alternate voltage from 5-9v when the device informs it, and it detects it through the data pins on the usb. Your device is incapable of that even if you used the correct quick charge cable, as the voltage is bucked to 5v only. But still nice try and well recorded.
Yes you have pointed out this flaw correctly.
Super! Sorry for a my bad english, but why did you used 2 different modules to a 5,2V charging?
Thanks you my teacher docta
Great job with all the best information
Thanks Brother
Welcome 😊
Q
U
@@easytechzones *Brother ye table kaha se purchase kiye ho* *please btao please* 🙏🏻😟
Sir please give link👇🏿 of product that you are using in video and next feucher video with MPR other wils great video and your's mind👌🏻🎆😄😃
You should replace the two resistors next to Tl431 in the 12 v dc charger instead of using buck converter , this will give you more amper
Would the charger be rapid? After replacing resisters. Are there already resisters after TI431?
He's wrong use the buck converters there capable of 4 amps I believe
@@emilyhouse9642 how can buck converter give more Amper more than 12v charger although 12v charger is powering buck converter
welcome RIP your phone...😂
Shut up
Your so genious brother
When i watch this vid my mind GOOS LIKE WHAT?😂
And connect the main to a buck/boost dc voltage converter with no protection board like what the hell man trying to born someones phone hahaha. I suggest u make a vid making a powerbank not thinga like this. But this is not a hate comment.
good
Nice Fast Charging Station...
Thankyou 🙏
@@easytechzones Welcome sir
How u can say that it's fast 🔋⚡
Super bro
It's hardly fast if you consider how many ports there are. Why do people do this lying thing all the time?
wow, you space ingeneer. 👍😮
Instead of wasting power and money on 12v 5amp smps , perchase a 5v 10-12 amp smps and use it... And don't forget to short data pins in the usb sockets...👍😀
Using a 12v supply and then converting it in to a 5v supply is not a good idea...🤔
I don't understand why use two kind of modules, what diference between LM2596 and XL4015?
Nice Project but the Shell for your fast charger It's a little Bit ugly.
My main question is can i use all 6 USB charging plugs at the same time with wich Ampere?
Not possible
@@easytechzones Can you explain why is not possible to use all the USB at a time?
Mantul bos
Sir your work is very good but one problem ,600 mah is not write for mobile for mobile maximum amps 1 amps
hi...
can you connect all the usb and don't lose amperage?
that is, if I connect several cell phones, does it not lose output voltage?
Don't try it, you will stuff up your phone's charging IC
Nice Job, Thanks for sharing
Bro you super 👍👍👍
Thankyou
Best video sir...👍
وحيش
Good idea 👍🏻😀
Thank's 4 u're knowlage 👍👍👍
Can you make a Triple USB QC 4.0 ?
Want something to charge 3 phones at 65w each
Very nice👍
Thankyou 🙏
Can you make another same video for charging like this by lead acid battery
Bro how much power to send ardinuo (like 5v or 12v or ac)sensor like recently u make one lamp
In this video i didn't use any arduino
In previous video use 5 v
In Any ardinuo only we will generate 5v or any high volt
Bro my mobile was supported 20w fast charging so can I generate 20watts or only 5v
5v 5mA dc
It's gonna be more expensive bro.. Those buck module would be 80rs each and. Power supply cost more than 500rs...nearly a 15 to 16doller project.. I have done this type off project to charge my phone but the ice gets ridiculously hot. glad that they have small heatsink.. Cool. Project
Very very good thanks you so much
supper
i am try to this projict
Use 12v 10amp smps
ok
WOW VERY VERY GOOD WORK😇😇😇
Nice work
Thankyou 🙏
What is the difference between lm2596 and xl4015?
great congratulations you could make one like this with wireles charger
czcams.com/video/XpxoFkLgy0M/video.html
Nice work appreciate
Awesome broooo
Will there be a short circuit or overload charging problem when charging Android phones and other 5 volt rechargeable devices with this multi port charger?? Please reply
How to make a power supply circuit from 3.7v-4.2v to 8.50v-9v using a D882 p transistor and a transformer?
Sempre estou ampliando os meus conhecimentos técnicos.SaoVicente-Sp/Brasil
Good job .
Thanks
Bhai 4015 buck converter 5 amp ka he agr usko mobile lagaya to mobile rahega kya?
May be for 3 and 5Ampers?
Do I need to short the data pins of the usb socket
nice bro well done
From how many rupees you purchase the 300w buck converter and from where???????
Amazon
@@easytechzones what's the price
Details dijiye items ka plz
someone explain me plz whats the difference between this and the normal charger? im just new to this type of learnings
You will get 2.5 amp from each port(1st 4 porr)
This one is garbage for more than 2 ports and will only fast charge on one
very nice vid,.//.,
Thanks 😊
When you buy this can you pls make a link for making self THX
No dont make it you are wasting your money
How bootloader in my microntroler in the mobile phone . Please make video in this topic.
Ok
It was a so nice video 😍😍😍😍😍
This is not fast charging 🤔🤔. The phone will never recognise this unit as charger, since the data pins of USB aren't connected properly. This system behaves like very slow charger. It's useful only for non standardized applications like project powering etc
You are right bro
I am thinking that thing
Nice work bro without data pin any phone couldn't take aftre from 10 watt
And also his voltage and current is not stable
And also buck converter is lass less efficient than any fast changer
He has 6 out put every out give around 7 to 8 watt because of loss in buck converter
And also his computer power brick / main power supply give 12v at 5 amp = 60 watt at maximum so every usb get 10 watt
So this is a power supply which have 6 usb ports and give around 9 ~ 8 watt in every socket
Sorry for the creator but you make a power supply to a useless thing
I agree with you.The buck converter has no charging function, so it's not fast charger. It's only the 5V adapter.
it's an advice for everyone,
I'm actually using a 3A buck converter from 9V old classic style transformer to staple 5V DC and but i use a car double usb female heads only because its has resistors between data pins it's fast and efficient but not 40W
Thank you for honest comment I like it much I am a beginner and learning from you . ang I also learned from other comments
plese i veryneed this suply in this month bro plese i see you all video and like them
Thankyou 🙏
@@easytechzones yiu make for me
It wont work. There are laws of physics that are broken here. If you think this guy has discovered a way to break ohms law, be my guest. Just so you know...he didn't. The more units you connect the less power each unit receives. It quickly becomes an ultra slow charger as you connect devices. Don't fall for this. Research everything you see online
very nice jobs tq
👌👌👌
Thankyou 🙏
Diwali me changer with rgb light video banayenge please🙏🙏🙏🙏🙏🙏🙏
Ok 😊
Good bro 👍👌
Thankyou 🙏
@@easytechzones welcome bro
Super bro
Nice
Thanks 😊
Where i can found the case ?
Can I use 5amp instead of 3amp..
Nice background music
Superb
Thankyou 🙏
How to get these modules that you had used
Ye green colour ka background jo h vo aap kha se purchase kiye hain btaiye please 🙏🏻🙏🏻🙏🏻
Amazon pe cutting mate search kijiye
@@easytechzones sir bhuttt time lga kl dundhne me tb jaa k mila thank you sir
Buenos noches amigo saludo
Con cargador de celular tambien sirve para cargar 5 Puerto conector hembra para hacer 5 conector de paralelo?
No d+ d- line, no fast charging.
this is fast charging project!!! czcams.com/video/rpP9qRbDZtY/video.html
Good
nice work
Thanks
Video is great but only two ports output 5v why only two. The amps are 1.9 for 2 only what about the others.
Thankyou 🙏
Buying 3 fast chargers for 15$ and distributor with multi ports would be much efficient!
without shorting usb data pins you wouldn't get faster charging speeds than 0.3A.
Bhai video me music mat daliye bol ke bataea apne kya lagaya kitne amr ka laga hai XL 4015 behter rahega aur samaj me aye nice video
Ok. I will try
Good job, but next time short out data pins in USB connectors.
Is it safe for devices?
i made the same project, but i replace the var. resistor with fix resistor. its charge my phone slower than average charger, but when its come to charge my powerbank, ist super quick.
Short the data pin to make the charging process faster
Bro DC socket kiya karega ?
He is big fan of Pvc box
Yes. Easily available
@@easytechzones yes
Of course
@@easytechzones 😂yeah
Nice one but can u tell me which smps toplogy used in this project
Its just a 12v adaptor. You you use 12v 10amp smps you will get better result
Bro ye 12v 5amp 60watt ka smps he jese tum adapter bol rhe ho or ye kes topology per based he me ye jana chata hu
That's not technically a fast charging box. A typical fast changing USB will initially deliver 5v then speak to the device and then deliver up to 12v.
My Samsung initially gets 5v then increases the charging voltage to 9v at around 1.4 to 1.7 amps.
Also a true multiple port USB fast charging station would need one module per port. It's a good concept but would have been good to see the total current delivered with 4 to 6 devices charging.
what is the purpose of the the banana jack ?