Plz Appreciate ur work and tell or List in All the parts with specs of each item to get from where.. So that anyone who is interested can buy and try to make such needed and decent apparatus.. Thanks for your efforts. Nasir from uae.
आपका काम करने का तरीका बहोतही सराहनिय है। बस एक रिक्वेस्ट है, व्हिडीओ में बॅकग्राउंड म्युझिक देने के बजाए अगर आप प्रोजेक्ट के बारेमें बताते जाएंगे तो बहोतसे नये लोगोंकी प्रोजेक्ट समझमें आएगा और उन्हे बनाने मे आसानी होगी,जैसे की कांपोनेंट के नाम,+ _ टर्मिनल इ.क्यूं की सभी लोग आपकी तरह परफेक्ट और एक्स्पर्ट नही होते है। कृपया हमारी सुचना पर विचार करें और प्रोजेक्ट में म्युझिक की जगह कॉमेंट्री करें जिससे हमें समझने में आसानी हो ,धन्यवाद और शुभकामनाएं ।
YOUR INTEREST AND ABILITY IN ELECTRONICS IS AMAZING, IN THIS VIDEO. HOWEVER, I SEE AN INCONVENIENCE THE RISK OF PUTTING TOO MANY ELECTRONICS COMPONENTS IN SMALL PLASTIC BOX IS TOO HIGH.
Sorry for that. Previously i was make some video with voice but due to my voice quality i decided to put video with out voice. But i will try in future. Sorry
Hi... Sir. Aap ka ye Adjustable power supply hame bahot achha laga aur aapka ye video dekh. jaisa aap ne is me bataya hai vaise hi humne sub component ka connection Kiya magar mujhe appear aur voltage value sahi nahi bata raha hai to mujhe kya karna chahiye pls. Help me. Is me humne 24 voltage ka power supply use Kiya hai aur uska bodi steel ke sheet ka banaya hai. Pls. mujhe aap guide kijiye .
I think that you should not charge any battery without battery charger board for the specified battery model. You could damage your battery. You have to follow some basic rules to charge a (for example) 18650 battery and I assume something similar for smartphone batteries. You can just throw 5v and expect everything to go well
Its all about the amps, you can charge a 12v car battery with 1.2kv, at just a 1.2 milliamps. But yea don't do this if you don't know what your doing, you could have a bad day.
Batteries are electrochemical cells. So you have to need to keep track of the state of the cell. It appears that here the batteries will be charged in constant current mode. That won't be good for maximum cell life.
Nice for beginners n interested in project.sir can you provide circuit also so it will be more beneficial to those who r interested in making new project.Thanks sir
I've watched a lot of these DIY electronics projects videos. And I have to wonder if there isn't a website for obnoxious background music? As it seems like instead of explaining what you are doing you choose to use distracting and obnoxious music instead.
F...ing true, annoying music, and every psu build is based on finished kits and pcbs, rarely someone does a psu build from scratch + explain it later...
agar iska upar ek 6 volt ka fan lagano hoye to bohut accha hota or sidemy ventilation hota , thanks vaiji bohut bohut sukriya apko , i,m from BANGLADESH .
Try to make small holes in the top for airflow the components are tightly pack so the mosfet and other components can produce heat and their durability will be less 😊😊
I am sorry if it a stupid question but the multi turn pot switch is very expensive online. Can we use a 10k potentiometer instead. I am sorry i dont know anything about electronics. Just wanted to try this on my own.
Good afternoon After several attempts at various electronics stores; I can't find the DC to DC converter. How can I arrange these two different models presented. one says default Out1.25v the other has 2 boxes with blue adjustment screws, a circle with filaments 2 two boards with what looks like 2 transistors. thanks for listening. João Marques Noivo, Lisbon, Portugal.
Hi , Very nice work , I have made one from your previous clips , but only get maximum 24v , where i need 36v , how can i improve it ,further more you install a 10k resister in this project , but i din,t install any , can you help to provide some info to get my power supply to run at 36v .. thanks
good-easy job, but the blinking display ?(does it your choice)? Please a schematic+ parts list, the reason for wiring-resistor on the voltage POT ???? *at least give some explanations in the description
@EASY TECH What is the use of LM2596 DC converter? Is it only required for feeding 5V to USB port and can it be removed if I don't need a USB supply? Also can I feed 12Vdc to buck converter instead of 36Vdc? Please answer bhai!!
I am your subscriber and I created the project of the 64x16 light bar with esp-wroom-32 wi-fi interface for arduino. in the arduino program you suggested which interface to choose to show the door and program it ??? thanks for any response-suggestion
hi I love watching your shows and I am asking if it possible you to please send a step by step on the order sheet on how to order the voltage step up , step down DC to DC converter circuit board and the current DC to DC converter circuit board . thank you.
Hi , thanks ,, i have the same kind of power supply from the clips you produce , but i only received the output voltage as 24v , when my high voltage board should produce 36v .. what may be the problem ,,, your advice please .. tks a lot
Bhai main ne1200 watt 20 A ka stepup module liya h jiska input 10-60 V and output 12-83V hai.... jisko main 12 volt 3 A k charger se chala rha hu but jaise hi main battery ko charge me laga rha hu ye module apne aap band ho jata h.....
I'm using SZBK07 module. Original trimmer 104-100k ohm for constant voltage. So i'm use 100k ohm presecion potentiometer for replace it. So what ohm should i put for external resistor?
Plz Appreciate ur work and tell or List in All the parts with specs of each item to get from where.. So that anyone who is interested can buy and try to make such needed and decent apparatus.. Thanks for your efforts. Nasir from uae.
आपका काम करने का तरीका बहोतही सराहनिय है। बस एक रिक्वेस्ट है, व्हिडीओ में बॅकग्राउंड म्युझिक देने के बजाए अगर आप प्रोजेक्ट के बारेमें बताते जाएंगे तो बहोतसे नये लोगोंकी प्रोजेक्ट समझमें आएगा और उन्हे बनाने मे आसानी होगी,जैसे की कांपोनेंट के नाम,+ _ टर्मिनल इ.क्यूं की सभी लोग आपकी तरह परफेक्ट और एक्स्पर्ट नही होते है। कृपया हमारी सुचना पर विचार करें और प्रोजेक्ट में म्युझिक की जगह कॉमेंट्री करें जिससे हमें समझने में आसानी हो ,धन्यवाद और शुभकामनाएं ।
YOUR INTEREST AND ABILITY IN ELECTRONICS IS AMAZING, IN THIS VIDEO. HOWEVER, I SEE AN INCONVENIENCE THE RISK OF PUTTING TOO MANY ELECTRONICS COMPONENTS IN SMALL PLASTIC BOX IS TOO HIGH.
Nice love from Assam 💓🥰👍🥰
Ok rất hay... mong bạn sẽ có thêm nhiều clip hay cho ae học hỏi... chúc bạn sk hp luôn vv thành đạt trong cuộc sống...
Life is so easy these days. I designed and built my first precision switcher almost 40 years ago.
Thanks
Indeed ... As a SK ham said one day : "this is not electronics. This is just modules assembly."
But if it's there, why not ?
@@easytechzones ض
@@eldontyrellcorp thats a good point 😎
@@easytechzones Bhai aap pvc plastic box kahan se purchase Karte Hain
Nice work , but you should make some holes sides of box for cooling electronic components, or use metal box
Yes
its remainds me my third AVPS, very compact, GOOD ONE
Thanks
To reach out you need to speak out. Some more information is needed. Add circuit diagram. Try to narrate the whole process etc
Sorry for that. Previously i was make some video with voice but due to my voice quality i decided to put video with out voice. But i will try in future. Sorry
@@easytechzones waiting for your upcoming works. I hope you'll take my advices. Thanks for responding
Yes. Thanks for your advice
Hi... Sir. Aap ka ye Adjustable power supply hame bahot achha laga aur aapka ye video dekh. jaisa aap ne is me bataya hai vaise hi humne sub component ka connection Kiya magar mujhe appear aur voltage value sahi nahi bata raha hai to mujhe kya karna chahiye pls. Help me.
Is me humne 24 voltage ka power supply use Kiya hai aur uska bodi steel ke sheet ka banaya hai. Pls. mujhe aap guide kijiye .
Good Electronics knowledge
Thankyou
I think that you should not charge any battery without battery charger board for the specified battery model. You could damage your battery. You have to follow some basic rules to charge a (for example) 18650 battery and I assume something similar for smartphone batteries. You can just throw 5v and expect everything to go well
Its all about the amps, you can charge a 12v car battery with 1.2kv, at just a 1.2 milliamps. But yea don't do this if you don't know what your doing, you could have a bad day.
Batteries are electrochemical cells. So you have to need to keep track of the state of the cell.
It appears that here the batteries will be charged in constant current mode. That won't be good for maximum cell life.
Nice for beginners n interested in project.sir can you provide circuit also so it will be more beneficial to those who r interested in making new project.Thanks sir
I've watched a lot of these DIY electronics projects videos. And I have to wonder if there isn't a website for obnoxious background music? As it seems like instead of explaining what you are doing you choose to use distracting and obnoxious music instead.
Ok
You should not play music background, u can tell us more details about ur work so it will help us,
Sokil brother make more details video's of his work
F...ing true, annoying music, and every psu build is based on finished kits and pcbs, rarely someone does a psu build from scratch + explain it later...
@@easytechzones 😅
You can just mute it
agar iska upar ek 6 volt ka fan lagano hoye to bohut accha hota or sidemy ventilation hota , thanks vaiji bohut bohut sukriya apko , i,m from BANGLADESH .
Hello I like the concept very much and am interested in trying to duplicate your work. Please leave a parts list
Totally agree the absence of a parts list was disappointing. 🙂
🆒 Thank you so much for uploading this video.
👍👍👍👍👍
Sharing with community 🇵🇰
Your soldering iron, excellent bro
Try to make small holes in the top for airflow the components are tightly pack so the mosfet and other components can produce heat and their durability will be less 😊😊
Great Project! Could you please paste some part list below the film?
So nice
I like your video. Are you not concerned about dissipating any heat? Nice project. Thank you.
You are awsome creator
Лайк и подпись! Отличная работа!🇷🇺
Good video esay tech. You use what k ohm multi turn potentiometer
10k
No-one can build this from knowing only the background songs. Are we supposed to be psychic?
Yep, you are right, he can talk and describe more details , that will help begainer like me who wants to make it at home
Nice one
Super
Very Good...!!!
Nice work
Hi ! You need fan cooler.
Congratulation !
Music is fantastic next video put hindi song Hum ko Aisa Wisa na samjhe hum bade kaam ki cheese hai 😀😭🤣
What is the power rating of multiturn potentiometer that you have used.
100v and 10amps rated. But Chinese so who knows
Thanks 😺
Welcome 😊
I am sorry if it a stupid question but the multi turn pot switch is very expensive online. Can we use a 10k potentiometer instead. I am sorry i dont know anything about electronics. Just wanted to try this on my own.
Better is make 10k trim pot
Then you will save 300
Why did you use that resistor on potentiometer??
Good afternoon
After several attempts at various electronics stores; I can't find the DC to DC converter. How can I arrange these two different models presented. one says default Out1.25v the other has 2 boxes with blue adjustment screws, a circle with filaments 2 two boards with what looks like 2 transistors. thanks for listening.
João Marques Noivo, Lisbon, Portugal.
great
Aur sir is module ke sath short circuit protection bhi lagaiye na...
Taki short-circuit hone par aapka project kharab na ho.
Hi @easytechzones, can you please make one for me? What would be price?
Hi , Very nice work , I have made one from your previous clips , but only get maximum 24v , where i need 36v , how can i improve it ,further more you install a 10k resister in this project , but i din,t install any , can you help to provide some info to get my power supply to run at 36v .. thanks
😙☺☺😙☺🥲☺🥲👍🤲🤙🤏💤
Can i able to know the what is the value of this potentiometer ??
Please reply 🙏🏻🙏🏻🙏🏻
Your reply make me successful in this project
Looks great and is probably electorally fine, but I don't see any ventilation holes or fan. It will probably get very hot after hours of use.
Hmmm
Very useful project for home 👍👻💯
Thankyou
good-easy job, but the blinking display ?(does it your choice)?
Please a schematic+ parts list,
the reason for wiring-resistor on the voltage POT ????
*at least give some explanations in the description
Good video#elidea
Good
Thanx
Nice work. I have also done one like this. Try to speak out. Use less music
Ok
Nice work. 💝💝
STILL LEARNING AND NEEDS INSPIRATION
Good friend 👉💯
@EASY TECH What is the use of LM2596 DC converter? Is it only required for feeding 5V to USB port and can it be removed if I don't need a USB supply?
Also can I feed 12Vdc to buck converter instead of 36Vdc? Please answer bhai!!
arkadaşım çok güzel bir çalışma emeğinize bilginize teşekkür ediyorum
2222223
Hi brother! Can you give us the all material list please? Tks
great is it possible to put the links of the components in description below the video, it can be useful it's a tip 😉😉😉😉
Online shopping stopped now
EASY TECH for the rest this could be useful as soon as it resumes
|:
please also attache fan for cooling....other wise some open area. like air wents..
Very good work
But i think you are forget to make Holes for ventilation.
Hi plz 3.7v 18650 battery charging circuit make
Still learning I don’t know where I will buy these assembled kits so that I too can try as a hobby
I am your subscriber and I created the project of the 64x16 light bar with esp-wroom-32 wi-fi interface for arduino.
in the arduino program you suggested which interface to choose to show the door and program it ???
thanks for any response-suggestion
Good work bro.
Is it made for cold weather countries ?
And need to provide circuit diagram
For learners like me
nice
Thanks
This is my 12th time I'm watching this because I can't make this so I just watch the video to satisfy 😔
I can make it but I don't need this
Kaktalio ghotona
Hi i like your project. i just want to know can i use 10k volume instate of potentiometer?
we need component list instead of song list...anyway nice work
Sir ji Jaihind
Ye product kitni value ka bnaa h please btana ji. I want to purchase it from you ji.
How much voltage of input?
Sir your this project is too costly😔😔
hi I love watching your shows and I am asking if it possible you to please send a step by step on the order sheet on how to order the voltage step up , step down DC to DC converter circuit board and the current DC to DC converter circuit board . thank you.
You can get them from Amazon, Wish, Geek, Sparkfun, or Digikey. Probably other websites too.
Please give your sound and component details and clear video also
#"Faltu time pass ho gaya"
Keşke malzeme listesi ve fiyatlarında verseydiniz ayrıca lütfen devre semalarında açıklamalarda paylasirmisiniz teşekkürler
Hi , thanks ,, i have the same kind of power supply from the clips you produce , but i only received the output voltage as 24v , when my high voltage board should produce 36v .. what may be the problem ,,, your advice please .. tks a lot
If you use 24 v smps then you will get max 24v
@@easytechzones Friend i am using a 36v smps but output volts read as 24v ..
Sir is se votlage or amp dono alag alag argest kar skte hai kya ???
Bhai konsa component kitne kitne watt ya volt ka lena hau ye bhi bataya karo
forgive my ignorance. why did you add the 10k resistor to the potentiometer?
Bhai main ne1200 watt 20 A ka stepup module liya h jiska input 10-60 V and output 12-83V hai.... jisko main 12 volt 3 A k charger se chala rha hu but jaise hi main battery ko charge me laga rha hu ye module apne aap band ho jata h.....
@EASY TECH Is it doable to use a 16v 4.5a laptop power adapter instead? Thanks!
darun dada
Dhannabad
Thank you sir
Thanks
You are welcome sir
How to add buzzer on reversed polarity
hey! is there any short protection what if accedently touched positive and nagative
6v 12v 24v battery charger hongi isse.?
Where did you buy this plastic box? Not available at our location.
I'm using SZBK07 module. Original trimmer 104-100k ohm for constant voltage. So i'm use 100k ohm presecion potentiometer for replace it. So what ohm should i put for external resistor?
Superb....
Thanks
Lovely. How to contact you. I want to buy one??
hello very good job maybe you have designed a 36+ neutral 36- Vcc dual source thanks
music chalanay ki bjaye agar ap describe kr dete k bnaya kis trah hai to zyada behtar hota
Why did you use "extra" 10 res. on the potentiometer. How much is the value of them?
Kindly advise regarding parts availability
Please I want the correct code for the previous project for Led
Sir potentiometer kitne ohms ka use kia hai appne
Can I use 36 volts 2 amp power supply in this project
Can you tell me the ammeter connection
Nice project. Lose the music.
Sir pot me kaon sa resistance lagaye ho...
Aur kyu lagaye ho...
Can this be use to charge BMS battery packs?
Hi amazing work done,can u plz share diagram
That is AC to DC converter board right?