Maya 2016 tutorial : How to create twisted rope ( NEW )

#3DModeling #3DAnimation
In this video I will revisit a video that I did in 2014 as the technique to create twisted rope has changed since Maya 2014
A big thank you to my sponsor Renderpeople.
Without them I could not make these videos !
To get free 3D models from them, follow this link below.
renderpeople.com/ref/3/
Any purchase you make on their website will support my channel at no extra expense to you !
--------- A BIG THANK YOU TO MY BIGGEST PATRONS ---------
Jason Swisher
Elizabeth K. Meeker
Jamie
Dylan Void
Steven Michael Peterson Studios
____________________________________________
MY GEAR ( FOR 3D ART & VIDEO CREATION )
www.mhtutorials.com/gear
MY BLOG
www.mhtutorials.com/blog
CURRENT CHALLENGES
www.mhtutorials.com/challenge
BECOME A PATRON AND GET PERKS
/ mhtutorials
BUSINESS AND COLLABORATION INQUIRIES
www.mhtutorials.com/contact
--------- The "Send me Stuff" address ---------
MH Tutorials
Attn : Mike Hermes
P.O. Box 1000
Unit E23 2260 BA Leidschendam
The Netherlands
--------- WEBSITE ---------
Official website MH Tutorials : www.mhtutorials.com/

[@FoeThaLoveOfMoney13]

Thank you Mike! I've been waiting for this for a while! I'll try it when I come home. Thanks again!

[@n2square]

i love love love your videos. im currently at a parametric design unit at the AA and was asked to learn maya in a week time. So your videos really helped a lot. Sometimes its hard to connect different objects to the most basic shapes. But your videos showed me that. Thanks so much. Cannot explain my gratitude!

[@MHTutorials3D]

Thank you so much Natasha, I really appreciate that :-) Best of luck with your studies

[@nicolehavelyana5265]

Mike you’re amazing! this video was clear, informative, and easy to follow along with. thank you for your help!

[@acejs223]

You, sir, are a life saver!!!!! Thanks for all your videos, they are so helpful!!!!!

[@kathryn71]

Mike, another great tutorial, and particularly as it's an update. Maya changes often, and it puts the burden on educators to re-do tutorials, so thank you for the extra work on top of the regular work :) You have really great ideas for which objects to create as well.

[@MHTutorials3D]

Thank you so much Kathryn

[@KateQKing]

Thank you for your tutorial. You're very clear and easy to follow!

[@gabrielwilsonmfa8857]

Hey Mike, just wanted to say thanks so much. You have helped me get through my Graduate degree. Fyi, you made a difference in my life.

[@MHTutorials3D]

Thak you so much Gabriel. I really appreciate that !

[@jessepinkmeng1556]

this is awesome! I've been subbed to you since I started using maya and you are one of my favourite teachers by far, thank you for being you!

[@MHTutorials3D]

+Andrew Mohr Thank you Andrew, appreciate that

thanks for update,,, its crazy how often Maya changes its tiny features of any kind

[@SilverSkylark]

Perfect tutorial, thankyou so much!

[@darijozivkovic7931]

Mike, you're my personal Savior. Your tutorials, are awesome!!!!!!!!!!!!!!!!!!!

[@MHTutorials3D]

Thank you !

[@kamimint2591]

Thank you so much. This' very eazy to understand even i'm just a beginner.

[@DerickWicks]

I wanted to send a Huge thanks to Mike for your amazing tutorials. I just wanted to point out something Mike did not cover. for this tutorial to work you need to go into your extrude settings and make polygons extrude along selected curve for this to work. Maya 2016 has this disabled natively.
So Edit mesh extrude option box extrude along selected curve.
Great tutorial Mike thanks so very much and please keep up the great work!

[@MHTutorials3D]

+Derick Wicks Thanks Derick !

[@tannedbatman5597]

Oh thanks buddy i was literaly going to comment about that.

[@Katia-dh8hc]

Still works beautifully in 2019. thank you for the video. I am trying to create tree roots that are twisted around each other, and I didn't know how to create just 1 curve. I planned to make 1 curve, duplicate, and adjust. But your twist tool life and time saver!! thank you for adding info about it. also, special thanks for info where you add Twist option tool to Extude floating window. I didn't have It by default, but I do have it now ))) . This video is ROCK!

[@MHTutorials3D]

There is actually a new and updated video I posted on this

[@NachetraGhimire]

Thanks Mike! love your tutorial :D

[@blah8934]

That's awesome! Thanks for the video using this in 2020!

[@somtochukwusandra2728]

Thanks a lot for all your tutorials

[@rosszess589]

Thanks so much for your thoughtful and detailed videos! On to the soft!

[@DayaanABA]

Thank you so much for an awesome and clear tutorial! this was really helpful.

[@MHTutorials3D]

And thank you for watching it !

[@keithyakouboff8755]

Thanks man. You illuminated a couple of things for me in that tute that I never knew about 2016.

[@MHTutorials3D]

You are welcome

[@DatAznGuy59]

Thanks a bunch for doing a video on this! Simple and easy to understand on how to do it.

[@MHTutorials3D]

You are very welcome

[@sankojin]

Man thank you so much! I have been trying all day to do this by hand and I thought to my self its maya 2016 there has to be a button that does this for me. So thank you again.

[@MHTutorials3D]

You are very welcome

[@kylemcneill5751]

Extremely helpful tutorial. Thank you :)

[@driftingorb5812]

very helpful for making wicks!! thank you

[@3d-tischler100]

I love your videos. Thats the best tutorials on youtube!

[@MHTutorials3D]

+3D Ruler Thank you

[@timboslice5351]

awesome man! thank you!

[@mahaalibrahim7934]

thank you very much that was quite helpful

[@purparyumi-raimyura-2]

Yes this is very helpful.
Evergreen!

[@owosenidamilare7311]

Thank you Mike

[@harikrishnan_g]

Helped a lot. Thanks ♥

[@day8166]

Thank you so much!This was really helpful for me.

[@MHTutorials3D]

Thank you

[@OversizePotato]

I love how you seem to have infinite videos on your channel because every time I check your channel for any videos that I have not yet watched, there are so many of them.

[@MHTutorials3D]

Almost 800 :-)

[@paux4097]

Thank you for sharing this tutorial

[@NeixTiMe123]

Thank you Mike !

[@nazmulislam-nh9wc]

Hi Sir, love you so much. Thanks to share your knowledge.

[@MHTutorials3D]

You are most welcome

[@lalcom6304]

Thanks you from the bottom of my heart for this video

[@MHTutorials3D]

You are very welcome

[@ropaeuropeaitalia]

tutorial exelente para maya 2016

[@ethan-thangtran4220]

I'm right here before you answered :)) lol!!thank you very much,both your tut and you replied.

[@MHTutorials3D]

+Thăng Trần Good

[@spagyeet]

thanks for the quick tutorial!

[@EverydayVagaries]

Thank you!! You're a lifesaver :0

[@MHTutorials3D]

You are welcome

[@YoungMailly]

Appreciate the vid, sir, currently conceptualizing for my engineering presentation!

[@MHTutorials3D]

+Anthony Mailly Cool !

[@shimaparsa524]

That was fairly easy! 🙏🏽

[@jench2588]

Thanks so much, finally got it to work. :)

[@MHTutorials3D]

Great

[@jtricker1614]

very nice thank you

[@kuldeepnath4471]

Thank you sir for helping me 🖤

[@Ori___._]

I love you ♥ Its so simple

[@MHTutorials3D]

Very welcome

[@tarunaira6818]

golden channel for Maya beginners

[@MHTutorials3D]

Thank you

[@freelights-music]

Excellent

[@Carlos97x]

Still really helpful in 2019!!!

[@sirbacharach1]

I'm struggling to do this in 2019, it doesn't seem to stretch from one point to another when I click the extrude function, do you have any idea where I might be going wrong?

[@Conceptsofsanket]

Can I use maya on Nvidea 940 mx 4gb

[@lordsmith830]

your tutorial is amazing

[@bahribudak3350]

simple and valuable

[@eduardoduenez2453]

Thank you so much!

[@abdulwalial_khawlani8680]

I was always fascinated by trap soft, been listening to trap long ti and i finally decided that i will try to make my own but i was so

[@laurenking8598]

BRAVO! So pretty

[@MHTutorials3D]

Thank you Lauren

[@umangkapoor165]

amazing real looking rope ... gr8 tutorial

[@MHTutorials3D]

+Umang Kapoor Thanks

[@karljoyeux5148]

thx for this tutorial. Its awsome !

[@MHTutorials3D]

Thanks Karl :-)

[@Motusification]

Thank you. Very helpful.

[@MHTutorials3D]

Appreciated

[@adrinshams8483]

Guys be sure select the damn curve and not the control points ,select the curve in the outliner then select polygon and it will change its pivot,
Thank you for ur tutorials MaN

[@archercandy6122]

woah... thats amazing

[@MHTutorials3D]

Thanks

[@eliellgvs1]

Thanks!

[@milagroswarnholtz2137]

good video! very useful!! thanks for shearing

[@crimsonBen]

ha! genius mike!! Thanks!

[@h.korayonel7148]

Perfect tutorial thanks

[@MHTutorials3D]

You're welcome!

[@bigio0066]

Thanks man

[@Amonlith]

Still helpful in 2021 with maya 2021 :) thank you.

[@calvinchan3404]

Still really helpful in 2018!!!

[@geraldinfernandez4813]

Thank you! Execelent!

[@MHTutorials3D]

You are very welcome !

[@user-wr5tc7kr9j]

thankyou!! :)

[@santanumandal498]

I am Frome India. I am watching your CZcams channel .I love you bro

[@mdatiqmahmud-8621]

thanks sir🥰🥰

[@gamalmohamed6051]

u r avery good in maya and I'm very haapy that u continue teatch us

[@MHTutorials3D]

Thank you

[@ahmedsalahais]

Nice video, thanks.

[@MHTutorials3D]

Thank you

[@amrhassan1411]

you are amazing , thank u so much

[@MHTutorials3D]

Thank YOU

[@DevAnimate]

Thank you

[@luanamotta5073]

thats awsome!

[@MHTutorials3D]

Thank you ! ( Like your hat ! )

[@lifestories101.1]

Respect and God increase you in every good ways.

[@bajzn]

Thank you so much man :D

[@MHTutorials3D]

You are very welcome

[@vedantshinde672]

awsome

[@styrishkinny420]

It works n it's awesome good gob

[@Parkyomi]

Oh, thank you so much >

[@MHTutorials3D]

You are very welcome Yomi. Great picture by the way, are you an artist ?

[@Parkyomi]

Mike Hermes oh, yeb, I'm not good at 2D, my avatar collected from internet website, lol
I'm 3D Artist :)) but i love 2D n 3D :)

[@ReallyRedPanda]

Thanks so much for the tutorial - really concise and clear! I did run into an issue with mine though - the rope twists are more dense in the middle and they loosen at both ends. I've played around with all the sliders and I've repeated the exercise from scratch in case I missed something. Can't figure it out so I'll work with what I have for now. Thanks you again, your free tutorials for the love of teaching and sharing are beyond awesome. :)

[@MHTutorials3D]

If you use the correct sliders and nothing else it should work. Try resetting the extrude tool

[@ReallyRedPanda]

I tried that yeah, I don't know why it didn't help. Even when I set the twists to over a thousand there's still some variation. Someone else in the comments had the same weird issue. I'll try it again later though. Thanks again!

[@biancaurholmen9944]

Im having the same problem. In places where there are more vertcies, it twists more, making it a very irregular rope

[@ReallyRedPanda]

Bianca Eilertsen In my case I'm using this rope model on a smaller scale, as bits of detail on a gold crown so consistency is important. My temporary solution was to delete where the twists start to become less tight and Mesh -> Fill Hole. But after messing around some more, I finally get what I was doing wrong.
Notice how when Mike is drawing the curve, he's plotting his points evenly? That even distribution of points = even twists. So when I draw my own curve and leave a wider gap between points, the rope barely twists at all. The closer the points the twistier it is. I feel stupid for not realising this sooner. :P
Some screenshots of an example rope and what it looks like as a curve vs what it looks like extruded (500 divisions, 5,000 twists):
imgur.com/a/BBczr

[@biancaurholmen9944]

That does explain it. I wasn't evenly spacing it, either. Good to have a solution to this, thank you

[@ceriyopk7981]

thanku mava

[@hanxiaohan6908]

that's cool

[@MHTutorials3D]

+Han XiaoHan Thank you

[@user-fn3ro5rm1d]

still really helpful in 2021!

[@snipekid37]

OMG thank you!

[@MHTutorials3D]

+Snipe God You're welcome

[@arpaci]

awesome vid

[@MHTutorials3D]

+eren arpaci Thank you

[@JDeviaro]

Thanks

[@MHTutorials3D]

You are very welcome

[@realtanax8658]

Wow ✨✨✨✨

[@user-uo8di9bs9y]

супер, спасибо!

[@oookam]

Nice

[@666Exodia666]

The bset tutorial ever TY

[@MHTutorials3D]

+Fernandinho Navas Thank you

[@maritzacastaneda6964]

really really thnak u so much

[@MHTutorials3D]

Very welcome

[@user-kb4nr1xc1v]

thank you ^_^

[@dk_jack]

Cool man

[@MHTutorials3D]

Thank you Dinesh

[@Pencilworld194]

My favorite channel Mike Hermes

[@MHTutorials3D]

Thanks

[@yuanchenli1471]

First, Thanks a lot for the video. I think I found something interesting may help someone. If you select the face from hit "F11" and select them by box (which means not select one by one using click). It will not work. The only way you can successfully extrude is doing the 100% same steps like Mike's video showing.
Hope the little tip can help someone like me. LOL

[@nefwaenre]

Thank you! Can you also please teach us how to create intricate objects using cross section of an object and a curve? Or how to create a closed curve shape and then extruding it to create a polygon. I know this is done in Max, exists in Maya as well but Maya turns everything into nurbs surface.

[@BigNorman14]

Thanks for the updated tutorial. It's a little hard to follow for beginners because you move rather quickly and use several hotkeys. It would make your tutorials much easier to follow if you could display keystrokes on-screen while recording. Just a suggestion, thanks again.

[@MHTutorials3D]

+BigNorman14 Thanks, I will keep that in mind !

[@cpt.stranglewank9569]

i dont even use these programs and i love your videos

[@MHTutorials3D]

That is pretty amazing !

[@mapartche2744]

Hey Mike ! Could you make a tutorial of how to model a bird nest ? There's not a lot of tutorial about objets like nests...