1/3 scale Cosworth DFV V8 engine. “Turn up the volume”
Vložit
- čas přidán 19. 09. 2020
- 1/3 scale Cosworth DFV V8 engine,
Over 1200 quality parts make this awesome engine run. Titanium valves aluminum block and heads, steel cylinder sleeves, billet components. Limited production. boulandmotorsusa.com
For some reason it bothered me a lot that he didn't do a longer, more drawn out rev.
Yeah me to, pissed me off.
@@halcyonoutlander2105 I was genuinely annoyed. I was sitting there waiting to hear it and I was like okay he's trying to emulate quick throttle blips. Okay, he's still doing weirdly timed super quick blips... Okay is he gonna.... NOPE, no he's not. As the video continued to play in the background I was like this is for sure why his wife left him, that's probably how he fingered her. Rapidly shoving a finger in and pulling it out just as fast only to get up walk around the bed for a different angle and shove that same finger in and out, wait like 5 seconds then rhythmlessly shove it in another two times.
@@Josh-nc6nt idk, maybe it's hard to do it but I was really annoyed too, lol.
Yes, I was talking to the video asking him why he doesn't just give it a little bit of low steady throttle. So annoying!
He couldn’t. He had no load on it so it would gave over revved and possibly come apart.
This never gets old.
Thanks, we really dig it too !
The iconic DFV in miniature, one of the most beautifully made scale engines I have ever seen! Sounds just right, and even has the quillotine throttles! Just speechless.
Thank you !
When I was a kid someone made a Merlin, it was on the cover of model engineer magazine, I think this beats even that.
@@joejoejoejoejoejoe4391 Thank You
It actually sounds a lot like a Cosworth.
The throttles look to be drums, not slides, it's a glow engine.
i would have liked to hear you slowly bring it up. blips are sweet alright but i bet it sounds amazing at a constant rpm apart from idle.
Listen again from 00:50, he does slower increases.
Screw that.... did you see the gearbox on the back? Rev the thing like normal, climbing through the gears, then back down again. I'd like to see how close this thing is to the Renault it was mounted in.
@@JerGol barely
I want to know what its power output is, and whether it puts out exactly 1/3 the power of the full size motor.
@@petetimbrell3527 1/3 scale would mean 1/27 volume (EDITED)
That sound when you piss off an already volatile chihuahua 🤣🤣🤣
🤣🤣🤣
Thanks idiot, now thats all i can hear. LOLL
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
@@devilsknight 🤣🤣
Haha!!
Utterly , utterly stunning. In every possible way , absolutely perfect.
Thanks Doug !
Couldn't agree more.
Yep, absolutely agree.
I would love to see that in an r/c car. Does that transaxle function also?
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
"Wow that would make for a very cool RC car, boat, truck, ANYTHING, really..."
You: "Yeah but I'm going to use it to power this square piece of wood."
It's Work of art.
@@mr.d.6529 True, I guess a lot of works of art are left intentionally incomplete to inspire the mind to imagine the unfinished portion...For example I imagine a scale McLaren M29 which would be much, much, much cooler than a square piece of wood.
@@billbilly7126 Much !
There’s a CZcams called like JohnnyQ50 or something like that who uses so-called down engines (v4’s, Rotary’s and others) in custom built RC cars, he even made a sweet clutch mechanism to run a 2 speed trans on one of his builds.
EDIT: it’s JohnnyQ90 and his content is elite tier basement engineering and machining
Exactly.!
So many of these engine not being used.
Shame like to see how fast a go-kart would be with one of these in...
I can hear Murray Walker now.... “and welcome to this years opening race of the F0.5 Championship season....”
Awesome
czcams.com/video/_WgE8Rng6g0/video.html
Actually that should be F0.33 championship.
“Is that Tiny Glock?”
@@nyyommm9640 Followed by Micro Rosberg
@@schumisebas with Lewis Hamiltiny in a close third
That engine sounds amazing. Killer throttle response and the growl of a proper V8. Nothing beats that.
Thank you !
@@boulandmotorsusa1228 You're, indeed, welcome.
One of the most beautiful things I have seen in my 70 years. Utter perfection.
Thank you !
THAT'S exactly what I wanted on my go-kart years ago - what a beauty!
Thank you
First small engine that is tuned correctly! Thumbs up! Bravo!
Thank you !
I'm going to add my name to those calling for this to be installed in a gokart 😁
Too small. If it were 1/2 scale or 3/4 scale then maybe you could power a kart.
Yhh
I can't begin to imagine how much work went in to this one of a kind little engine, I mean all the parts, oil pump, cooling, just amazing.
Mr Smith, we have a limited number available of these rare engines.
Thanks for your comment !
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
I've never wanted grown up toys or display models but I would LOVE a huge collection of miniature V8s. This is beautiful!
Thank you
Below are links for more pics & videos!
Thank you
Glenn
Bouland Motors USA
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
@@boulandmotorsusa1228 Thank you!
That is the coolest paperweight I have ever seen.
That’s insane and it sounds so good
This engine does sound good. !
Throttle response is right there too!
Impressive craftmanship. Thumb up
Thank you
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
I don't know why but these mini engines fascinate me. This one sounds amazing!!
Thank you,
The engines are amazing & made very well. See links below. Limited number available.
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
I think it makes it more impressive than a full size engine knowing all the parts were most likely custom made.
Thank you . Yes all custom made.
See links below for more pics & info
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Now let's hear it under load!
Absolutely, that's what I was hoping on. Sounds like it needs a heavier flywheel to help calm the speed of the revs.
@@Twed It needs to be put in a 1/3rd scale Lotus 49 and flogged proper
@@TestECull The level of Flogging that only occurs when it doesn't belong to you 😂
@@Twed Unless I'm the owner in which case I'm beating the everloving hell out of it every time I run it! CAn see in my videos too, especially the one where I tear my yard to shreds with my Scorpion XXL. I am not afraid of the loud pedal in my RCs!
@@Twed But imagine it China manufactured them dirt cheep, stick one in a go-kart or something.
it even makes a proper sound.
i am impressed.
Wow! ...just wow. That sound!
I've shared this with some guys who work at the Cosworth factory in the UK. They think it is awesome.
This engines is licensed by Cosworth.
Thank you !
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
My 6 year old daughter said that she wants that in her power wheel...
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
@@boulandmotorsusa1228 . This engine would actually fit great in a power wheels. Great reply and thanks for the specs!
No she didnt
@@marco.9900 that would be fast! 7 hp in a power wheels? Need some go kart tires for that, and you got arace car
@@Chevycamaro-rg6sd I agree that go kart tires would be needed, but my Kawasaki Klx110 has 7 hp and it is perfectly manageable. A worthy step up from the pitiful 5mph top speed of stock power wheels cars. Certain people on CZcams have even put 40hp 450cc engines in power wheels cars! At that point it is no longer a race car, but completely unmanageable lol.
It even has a gearbox installed wth lol 😂 man that lil motor sounds soo good
That is insane,unbelievable talent that people have
Thank you
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
That throttle response is something else!
Thank you Glenn !
Best throttle response ive seen.
Throttle response is right on, the 4 cams, 8 carburetors and the engine design makes for a great running engine !
@@boulandmotorsusa1228 Man I can well imagine. It sounds AWESOME!!
Would love to see this hooked up to a simple go-kart
I'd love to see this in my Ford Falcon 🤣
Exactly what I thought before I looked at the comments!
This is prolly still really strong. Way more powerful that my moped was.
@@MISTER__OWL website says it makes 7hp. That's plenty for a go-kart!
Our engine is small for Go Kart, but great for a 1/3 scale build.
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
This is so awesome!!! I love watching the cam belt spinning. Sounds amazing too!!!!! I bet you have the coolest riding lawnmower on the block!!!
Fan-bloody-tastic. Jim Clark would be buzzing from beyond.
Jim would have one of engines in his office!
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
As a CNC machinist, I appreciate the work gone into it...
Thank you ! You would know !
Omg! That sound! Exact dfv!
Absolutely glorious! Amazing. I adore it. I am massive fan of cosworth and DFV. Thanks! Wish you drew the rev more though.
Thank you we are also big fans of Cosworth DFV engines. I will post more videos! Stay tuned!
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Absolutely amazing. My favourite race engine of all time
It is a very iconic engine. That is why we made a few for sale.
Thank you !
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
@@boulandmotorsusa1228 I've got DFV books, Cosworth books,cutaway drawings, you name it. If I could afford one trust me I'd have it shipped to Ireland tomorrow! But I'm a precision engineer and know the pain and workmanship that must've went into them
@@TheBlaert thank you!
Stay safe
Okay I’ve seen a few of these miniature running engines, someone needs to create a RC car class for these mini v8’s.
theres an rc gravedigger on youtube with a conolly stinger v8
@@Savagetechie that is epic dude!! Thanks for that
Very expensive. Such a series would place them in a category above that of high end RC jet planes.
Another issue is tracks. Other than karting circuits, I don't know of anything else suitable to accommodate.
Then there is the issue of erecting purpose built high level rostrums, having the visual capacity to see very far as in having eagle eyes. You could use an onboard camera transmitter and dedicated head display receiver (more expense).
Given how high up you'd be, there'd also be a mandatory need to use race legal radio comms between yourself and pit person (more user expense).
It's an interesting idea, but given what already exists, is established and within budget for most, it's too much for it to be considered a worthy proposition. Enjoy it for what it is.
My qualification (albeit not to such a world class standard):
czcams.com/video/jMG4henrC9U/video.html
Incidentally, they are not suitable for on-board cameras. They are too fast and low:
czcams.com/video/6ykaOmx2yFM/video.html
As soon as they find a cure for apostrophe abuse 🧐😎😜
Great idea. Five year olds driving?
I would love to hear it under load on a dyno just singing and misting those baby trumpets..
Maybe going through some gears
It needs a car built around it now. The RC capabilities now are unreal. Onboard camera and actual races, too cool.
I got a semi reading this.
@@deborahchesser7375 couldn't agree more one of the lotus f1 cars I mean this engine has graced many a f1 car in it's day I love this thing
@@deborahchesser7375 you’re not thinking big enough... that in a kart would be something else (providing there’s torque)
One can tell this was an absolute work of love. Done to perfection. Bravo!
Thank you
Those cams are LUMPY! 🎶
Competition ground cams !
How impressive is THAT!!??👏🏽👏🏽
Thank you !
What a masterpiece. Beautiful sound.👍👍
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
This is the result when you’re well versed in your craft. I salute you !
Thank you !
Damm that’s a nice sounding motor.Sure was fun putting together
Thank you
This is awesome! They have kits like this but probably not as nice as this. I’ve always wanted to make one of these
Thank you!
Our engine are built, tested & tuned before shipping.
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
This is engine in scale in an go -kart wow awesome pure v8 genials 😍😍👍🏎🏎
This sir is one of the coolest things I have ever seen! BRAVO! BRAVO! I wonder why I have never seen these before?
Thank you, here is a little more information.
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
This has made my day, someone needs to make full sized versions for the enthusiast to put in their Lotus 7 replicas
I was looking at the engine wondering what power it makes as it’s plenty small enough and would weigh less than the rover k series in there at the moment.
I think Cosworth did back in the day
Amazing engineering. I respect that.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
that’d make for one hell of an amazon bike kit😂
7hp and the gas use of a suspersport.
Dude look at how cute that damn belt heads and headers look. Babe I need one for Christmas
Thanks
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
wow, drops like a rock after you drop the throttle, impressive!
very little inertia in an engine that small.
Put it in a go cart dude!
Up the hill at Goodwood!!!
Listen to that throttle response! Holy crap.
Thank you ! You understand how well the engine is tuned. Thanks
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
That engine would make one of the baddest RC cars ever! Hell yes 🤘🤘🤘🤘🤘🤘🤘🤘
Thank you,
There is a handful of RC cars using our engines!
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Keith Duckworth and Jim Clark would approve!
I’m sure they would ! And I’m sure they would have one too !
mike costin and keith duckworth surely!?
@@johnsmith-nl3js
All 3 of them, perhaps.
@@monsieurcommissaire1628 jim clark was just a driver, a fucking good one at that but costin and duckworth were cosworth!
Wow, that's so impressive. What sort of things have they gone into?
A handful of 1/3 scale Lotus 49 F1’s were built with our engines.
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
What a lovely sound for such a little guy
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
This is incredible! you sir definitely are a master and the craftmanship looks incredible. Congrats.
Thank you, but the master craftsmen is Mr. Bouland, these engines are works of art.
@@boulandmotorsusa1228 They definitely are, also props for doing a rendition of such a legendary engine too.
So cool!! You would like to see my homemade 1/5 49cc RC car!
Crikey that thing is wicked, imagine if it was a twin Turbo.....
Thanks
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Yes , then it would even more power to do absolutely nothing !
What a masterpiece :)
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Wonderful. It would look great sitting next to my DFV sitting in my garage.
It is a piece of art and would look great next to you engine.
I want to hear acceleration under load!
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Damn these F1 regulations are getting extreme.
Lol
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
The coolest model I've ever seen! Thanks for sharing!
Thank you Glenn
Very impressive, well done to you!
Thank you
7HP man that engine has more horses power then my chainsaw!
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Glenn
Bouland Motors USA
Flat plane crank sound!!
Insane engineering skills , fantastic
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Could this power a child’s go-kart?? This is absolutely bloody amazing !!
A little small for a kart , thank you
@@boulandmotorsusa1228 7hp isn't far off what the 50cc carts make tbh
And would sound 1000x better lol 😂
artwork
It is thank you
Now to put it in a 1/3 scale car. And find a 1/3 scale person to drive it.
Midget
It would be also a amazing and crazy experience to make a 3 times bigger engine than the original one. I wonder how the sound would be like 😁
I think that was done ? Lol
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
At least this guy let's the engine warm a little before revving it.
👍
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
awesome!!!
Thank you
This would be so cool in a RC Lotus type 49
It has been done John, a friend in the Netherlands has built them! Awesome
@@SV1Bricklin Thanks for the heads up. Now I know what I want for Christmas haha
@@johnherbold6539 me too !!!
That's awesome! Now you just need a 1/3 scale F1 car to put it in.
Just so happened to have my headphones on.🥰👌🎶
Would definitely like to hear that under a load.😎
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
imagine this in a scaled Lotus 49
It has been done. My friend has made a handful of 1/3 scale Lotus 49’s using the Cosworth engine. Absolutely a work of art !
@@boulandmotorsusa1228 Any chance of a video of one?
@@talon1706 check out on Facebook- Jim Clark fan club memorabilia. You will see some pics posted of the 1:3 Lotus 49
Absolutamente maravilhoso! 😍
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
@@boulandmotorsusa1228 wow, nice specs!
I’ve always wanted to stick one of these in a go-kart. I couldn’t think of a better way to use it
That would go great in my “Pitt’s Special” 1/4 scale 🤣
Slap that puppy in a go cart and let's play
I word for word just had that same thought lmao
This thing in a go cart or motorcycle would be insane
These need to be about 500cc so you could put them in a motorcycle frame.
I was going to say that!!! A different bike that no one else has might sell like icecream in july
sounds better than a lot of new cars in the market ngl
Slow the video speed down and you can hear that iconic Cosworth V8 sound! 👍👏
I will be making more videos!
Thank you for your interest in Bouland Motors & the 1/3 scale
Cosworth DFV V8 engine.
The engines come
Assembled, tested and tuned. Along with the engine your will receive a very nice start box with volt and temp gauges,fuel and coolant tanks, 12v battery. And a mini SnapOn tool box. This price includes Shipping $12,000 usd.
See links be low for more pics & info.
Thank you
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
I would love to swap this in a motorcycle.
i was thinkin that too...
@mangusti hopo 50cc scooters move people all the time. This thing is 70cc and makes 7 hp.
Swoon!
Incredible! Love it. Reminds me of the good old days of F1.
Thank you
Bouland Motors USA
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
Great model which sounds as good as the big one
now please put that in an RC car and show those posers up lol thats an engine for ya
Put it in the back of a tesla linked to the throttle for acceleration sounds , it would go with speed !!!
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
You've got to put this in something! The world needs it right now
We have a limited number available!
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
There is a few 1/3 scale Lotus 49 custom. Made with our engines!
@@boulandmotorsusa1228 7hp! I'm thinking world's best motorized bicycle
Wowzers! Imagine installing this into a race kart, holy moly😀
Thank you !
The way people drive. That all you need in today's new cars. Keep the M.P.H down. 🤣
Stunning, amazing work!
Thank you !
A beautiful piece of art! I would like to have heard it "accelerating" for more than a split secon tho 😅
Would love to see it in a Kart or something 😁
Our engine a tuned to perfection
Engine specs
Displacement - 76CC
Bore 24mm
Stoke - 21mm
Output - 7HP
Redline - 10,000rpm
Weight - 14kg
Length - 460mm
Width - 240mm
Fuel - Methanol +6% oil
Water-cooled
Electric Start
8 carburetors
instagram.com/bouland_motors_usa/
boulandmotorsusa.com/
That’s unbelievable. Holy smokes
Thank you