Thanks For Watching! What other vehicle maintenance videos would you like to see? Let me know in the comments! TINKER FORWARD HIDDEN ROBOT CHALLENGE! Did you find the hidden robot popup somewhere in the video? If so, be the first person to indicate the time you saw it along with your best comment to get your name and CZcams channel featured in our Hall of Fame on our Tinker Forward website at www.tinkerforward.com
Thanks so much for the help. I am an old lady and I was able to replace both of my front turn signal bulbs. I did discover one thing that made it a little easier. The light in our garage wasn’t great and I had trouble finding the hole when reinserting, the bulb apparatus. By shining my flashlight from the outside hole left when I removed the bulb and looking for the light under the hood it was much easier to replace the bulb in the right spot. Hope this helps another old lady :-)
Usually I have to wait for my husband to do this kind of stuff, and it usually involves many requests/reminders. Today I decided to try it myself, after watching your video. Success!!! I am empowered 😁.
I have zero knowledge when it comes to car repairs. Fortunately you are well-spoken and make simple bulb replacement procedures easy to understand. THANK YOU!!
Too many simple how-to diy auto videos have annoying downtime, or steps are shown too quickly or slowly or at awful angles. This video did none of those things. A+ sir, well-done, big help!
Thanks for the help, and more importantly thank you for not spending 10 minutes explaining how the car was made and what the manufacturing process is for lights! We came for instructions and we received instructions!
Thanks so much! I'm a traveling artist and it went out last night traveling from Tempe to El Paso. I'm back in Ft. Worth now and was able to change it. Super easy. Thanks!
Thanks Jeff for making this video so easy. I’m all for short and easy DIY videos. 🥰❤️ I’ll just add 2 pointers….Wear disposable gloves and use bulb grease on the bottom part of the bulb that goes in the connector. Have a very blessed day!!! 🥰❤️
A clear, complete, and succinct explanation. Took all of 5 minutes - paying attention to how the wires were aligned before pulling it out made it easy to realign the grooves when putting it back.
The bulb replacement was easy on my 2010 Town and Country. The upper radiator hose is right where your hand needs to be, so on the right front you need to change the bulb when the engine is cold. Thanks for a great video. You are a great teacher! Steve from Florida
Thanks so much for a short concuse video with good camera angles for this video. I have a 2013 year model. I was able to change this in 2 minutes after the confidence i had and watching your video just once. Thank you. I will try changing the cabin air filter next. My dealer said it needed changed.
I did it! I did it! I am a 75-year-old who is young enough to be taught new trricks. My hands were also small enough to fit in the engine and grab and turn the light. I had a problem finding the spot to plug it back in, but I looked at the left front directional to see where it went back in. I was successful. Thank you for the video.
Jeff, Thank you for this video. I was worried about how to get the bulb out of the socket so the video helped! You are right about the corrosion. As it turned out, the local parts store sold me the wrong bulb. I was able to clean off the contacts of my old bulb. I reinstalled it, and now I have a working signal again.
Awesome! I'm glad the video was helpful! Be sure to check out my other car maintenance and tips to keep your car / minivan running great such as how to change your cabin air filter, windshield wipers, how to unfreeze van doors and more in my playlist here: Car Tips & Enhancements: czcams.com/play/PL-ejpb-NKxVAfkLkQ2_MvYqAF7vDl9FIH.html
Just wanted to say Thank you very much your video was great and key to helping this non-mechanic replace the blinker without having to call for back-up!!
Simple, short video. Great explanation. Didn't know how to change a blinker 5 min ago, just finished changing it in the Auto Zone parking lot. Thanks big high 5!
Seamless! Really appreciate your help. Like other people have said, it took less than 5 minutes in the parking lot of the auto supply store. Extra credit for the Devil’s Lake State Park shirt!! 🙌🏼woot!
Congrats! You were the first one to spot Tinker, our hidden robot, and give his specific time popping up in this video! You’ve been added you to our Tinker Forward Hall of Fame at www.tinkerforward.com and I’ll give you a shout out in my next video. Thanks for watching! Be sure to subscribe and click the bell icon to get notified when I release new videos! - Jeff :)
That's great to hear Melodie! I just showed you the steps, you are the superhero! Thanks so much for watching! Be sure to check out some other great videos on my channel to help you with DIY projects and more!
Thanks for the advice Jeff!! My change was plagued by a dropped bulb into the recess that hold it 😂!!! Luckily, like a “real man” would have, I had a small extension magnet and was able to coax it back it out and change it with ease!!!
You're welcome! I also worry about dropping the replacement bulb into areas I can't reach easily. A small extension magnet would get it back, thanks for the tip! I'm glad you were able to get it changed! I appreciate you watching!
Glad you liked it! I appreciate you watching! Be sure to check out my other helpful Chrysler Town and Country maintenance videos in this playlist here: czcams.com/play/PL-ejpb-NKxVDwofVYQEb4LOERB-e4_J8n.html
GOOD viedeo there is not much room to get a hand in there. The only other thing i would say is to spray the connection with electracle spray and try the signal before putting in back in the car. Good job b
Thank you so much…..I know very little about fixing cars yet your video EMPOWERED me, and I WAS SUCCESSFUL. If you are on Instagram I would love to tag you to my post. Very Grateful For Your Teaching Video!
You are very welcome! Thanks so much for watching, I'm Glad the video helped and I'm proud of you for doing your own vehicle maintence. Yep, I'm on Instagram @Tinkerforward
Replaced my turn signal bulb, and it still does not blink, looked for a fuse and did not see a fuse for the blinker, wondering if you had any suggestions.
I replaced the bulbs with a new led version. The blinkers work visually outside but inside you get the fast blink with a message saying the bulb isn't working
I changed the bulb but it's acting like I didn't. Goes to notifying me and the rapid blinks. The light is in blinking rapidly as well. Any suggestions?
Thanks For Watching! What other vehicle maintenance videos would you like to see? Let me know in the comments!
TINKER FORWARD HIDDEN ROBOT CHALLENGE!
Did you find the hidden robot popup somewhere in the video? If so, be the first person to indicate the time you saw it along with your best comment to get your name and CZcams channel featured in our Hall of Fame on our Tinker Forward website at www.tinkerforward.com
How about showing how to change the side marker light for the left side marker on a T&C 2012?
Thanks so much for the help. I am an old lady and I was able to replace both of my front turn signal bulbs. I did discover one thing that made it a little easier. The light in our garage wasn’t great and I had trouble finding the hole when reinserting, the bulb apparatus. By shining my flashlight from the outside hole left when I removed the bulb and looking for the light under the hood it was much easier to replace the bulb in the right spot. Hope this helps another old lady :-)
Usually I have to wait for my husband to do this kind of stuff, and it usually involves many requests/reminders. Today I decided to try it myself, after watching your video. Success!!! I am empowered 😁.
That's awesome! Im glad you tried it! Way to go! Thanks for watching!
I have zero knowledge when it comes to car repairs. Fortunately you are well-spoken and make simple bulb replacement procedures easy to understand. THANK YOU!!
Too many simple how-to diy auto videos have annoying downtime, or steps are shown too quickly or slowly or at awful angles. This video did none of those things. A+ sir, well-done, big help!
Awesome! Glad I could help! Thanks for watching!
My little boy and I watched your video and went out and did it! Daddy will be surprised when he gets home.
That's awesome! Great job! Thanks for watching!
Thanks for the help, and more importantly thank you for not spending 10 minutes explaining how the car was made and what the manufacturing process is for lights! We came for instructions and we received instructions!
No problem 👍
Super easy to the point
Thanks for sharing how to change that bulb! Five minutes later it is done!!
Thank you! We were ready to take off the whole front bumper. You saved us from catastrophe!!!
You're welcome! I'm glad the video was helpful! It's always great when you don't have to take off a whole bumper!
Thanks so much! I'm a traveling artist and it went out last night traveling from Tempe to El Paso. I'm back in Ft. Worth now and was able to change it. Super easy. Thanks!
You're welcome!
Thanks Jeff for making this video so easy. I’m all for short and easy DIY videos. 🥰❤️ I’ll just add 2 pointers….Wear disposable gloves and use bulb grease on the bottom part of the bulb that goes in the connector. Have a very blessed day!!! 🥰❤️
A clear, complete, and succinct explanation. Took all of 5 minutes - paying attention to how the wires were aligned before pulling it out made it easy to realign the grooves when putting it back.
Helped me out!!! Got it with minimal effort thanks to you!!!!
The bulb replacement was easy on my 2010 Town and Country. The upper radiator hose is right where your hand needs to be, so on the right front you need to change the bulb when the engine is cold.
Thanks for a great video. You are a great teacher!
Steve from Florida
Thank you so much I was going to have a guy help me, but after I seen this video, I did it myself
Worked like a charm. In fact, it was just a loose connection. After removing and reinserting, it works!
Thank you so much for this video. I was able to do this myself and it was super easy. I felt on top of the world when I successfully completed it!!!
You're welcome? I'm glad the video was helpful! It's a great feeling when you can do your own maintenance!
I did it! Thank you for clear, easy-to-understand directions!
Awesome! You're welcome!
Thanks to your video, I changed out my bulb! Again, thank you!
Thank you... need to change my 2010 Voyager turn signals , and this video was clear and easy for understanding 👍🙌
You're welcome! Good to hear! Good luck changing your turn signals!
Thanks so much for a short concuse video with good camera angles for this video. I have a 2013 year model. I was able to change this in 2 minutes after the confidence i had and watching your video just once. Thank you. I will try changing the cabin air filter next. My dealer said it needed changed.
I did it! I did it! I am a 75-year-old who is young enough to be taught new trricks. My hands were also small enough to fit in the engine and grab and turn the light. I had a problem finding the spot to plug it back in, but I looked at the left front directional to see where it went back in. I was successful. Thank you for the video.
That's awesome to hear that you were able to have success changing your turn signal! I'm glad my video was helpful! Thanks so much for watching!
Jeff, Thank you for this video. I was worried about how to get the bulb out of the socket so the video helped! You are right about the corrosion. As it turned out, the local parts store sold me the wrong bulb. I was able to clean off the contacts of my old bulb. I reinstalled it, and now I have a working signal again.
Hey Phil, that's great to hear that you were able to clean the contacts of the old bulb and get it working again! Thanks for watching!
Tinker was on the radiator cap when talking about removing corrosion from the bulb holder. Thanks
Thank yah mate, it was easy peasy and I didn't break the plug!
Yes, I followed your instructions and I was able to do the job. Thanks for explaining so clearly!
Thank you very much for this video. You helped a young lady out 😊
Thanks so much! I was able to change my turn signal bulb super easy while watching your video!
Awesome! I'm glad the video was helpful!
Be sure to check out my other car maintenance and tips to keep your car / minivan running great such as how to change your cabin air filter, windshield wipers, how to unfreeze van doors and more in my playlist here:
Car Tips & Enhancements: czcams.com/play/PL-ejpb-NKxVAfkLkQ2_MvYqAF7vDl9FIH.html
Just wanted to say Thank you very much your video was great and key to helping this non-mechanic replace the blinker without having to call for back-up!!
Simple, short video. Great explanation. Didn't know how to change a blinker 5 min ago, just finished changing it in the Auto Zone parking lot. Thanks big high 5!
Thank you for posting this video. I changed the light no problem.
Thank you! I need to do mine today, and I'm a visual learner (:
Great job! Straightforward and didn't try to make it complicated or condescending. Thanks!
I did a car thing and it worked lol Thanks a bunch!
Awesome! Glad it worked!
Thanks a million!! 2010 Pacifica (same as a T&C), bub went out yesterday. Headed to parts store in the morning!
You're welcome!
Thank you, I was able to change my turn signal bulb watching your video!
The robot flashed around 4 minutes. Thank you for this video
Thanks for a clear tutorial. I went ahead and changed both bulbs though only one failed. Preventative maintenance, 😉
Nice work!
Thanks so much for the straightforward explanation! I am mechanically challenged but I now have a blinker that works. And I am a new subscriber.
Awesome to hear! Thanks so much for watching!
Thanks Jeff!
Great job Jeff!!
Thanks!
Got it to work!! Thank you!!
Seamless! Really appreciate your help. Like other people have said, it took less than 5 minutes in the parking lot of the auto supply store. Extra credit for the Devil’s Lake State Park shirt!! 🙌🏼woot!
You're welcome! I'm glad the video was helpful! And Devil's Lake is a great getaway destination as well!
Thank you so much i was trying to take off housing i really appreciate u
Glad I could help
This was very useful, thank you.
You're welcome! Thanks for watching!
Saw tinker at 3:53 on the video. Im going to try your steps as soon as i get paid to buy the bulb. Thanks for posting this.
Congrats! You were the first one to spot Tinker, our hidden robot, and give his specific time popping up in this video! You’ve been added you to our Tinker Forward Hall of Fame at www.tinkerforward.com and I’ll give you a shout out in my next video. Thanks for watching! Be sure to subscribe and click the bell icon to get notified when I release new videos! - Jeff :)
Thanks man that was easy! Got er done!
Nice job!
I did it, thanks to YOU!!!!!
That's great to hear Melodie! I just showed you the steps, you are the superhero! Thanks so much for watching! Be sure to check out some other great videos on my channel to help you with DIY projects and more!
Thank you! Changed it in under 5 mins! You rock.
I did it by myself!!!! Thanks Jeff for your help 🤗
Great job Andrea! I appreciate you letting me know! Thanks for watching!
Thanks for this. Fixed!
Thank you! I’m about to go try it 😊
Thank you so much.. I did it all by myself in 2 minutes
Glad it helped!
Thanks Jeff
Success! Thanks! Mine is a 2008 (same color as the one on your video), same procedure. Again, thanks.
Thank you so much.😊
Muy buena la explicacio gracias
Thank you
You're welcome! Thanks for watching!
Thank you for the video. Super easy fix for a novice!!!
Worked perfect thanks
Thank you!
big help thanks for sharing !
thank you so much for this!!! i never had anyone teaching me how to fix basic things for my car so this was a huge help!
You're welcome! I'm glad I could teach you! Thanks for watching!
Thank you so much. I changed both of my turn signal bulbs.
Thx Jeff 😁
Thank you so much! This helped so much!
You're welcome!
Thanks for the help! Super easy to follow!
Great video
Thanks!
Thanks works great
thank you so much
Super easy
Thanks a lot
I did it!! Thank you!
Thanks
Thanks for the advice Jeff!! My change was plagued by a dropped bulb into the recess that hold it 😂!!! Luckily, like a “real man” would have, I had a small extension magnet and was able to coax it back it out and change it with ease!!!
You're welcome! I also worry about dropping the replacement bulb into areas I can't reach easily. A small extension magnet would get it back, thanks for the tip! I'm glad you were able to get it changed! I appreciate you watching!
Thank you!!!!
I did it....thank you so much
Thank you! Extremely helpful consists and clear!
Thank you very helpful
You're welcome! Thanks for watching!
Thank you Jeff. I succeed
That's awesome!
@@TinkerForward Yes, it is. Thanks to you
worked like a charm. Thanks!
That's great to hear!
very good video thank you
Glad you liked it! I appreciate you watching! Be sure to check out my other helpful Chrysler Town and Country maintenance videos in this playlist here: czcams.com/play/PL-ejpb-NKxVDwofVYQEb4LOERB-e4_J8n.html
GOOD viedeo there is not much room to get a hand in there. The only other thing i would say is to spray the connection with electracle spray and try the signal before putting in back in the car. Good job
b
Worked like a charm!✨✨👌🏾 Thanks so much!
Great to hear!
Thanks for the video, just want to say fabulous shirt!
Awesome 😀
Thank you couldn’t find the bulb
You're welcome!
I did it! Thanks so much!
Awesome video helped a lot 🥳
You are welcome! Thanks for watching!
Thank you so much…..I know very little about fixing cars yet your video EMPOWERED me, and I WAS SUCCESSFUL. If you are on Instagram I would love to tag you to my post.
Very Grateful For Your Teaching Video!
You are very welcome! Thanks so much for watching, I'm Glad the video helped and I'm proud of you for doing your own vehicle maintence. Yep, I'm on Instagram @Tinkerforward
Thank you!!
How to change the small blinker at the front
My passenger seat heating element is out and my driver side overheats and my Town & Country 2014
Replaced my turn signal bulb, and it still does not blink, looked for a fuse and did not see a fuse for the blinker, wondering if you had any suggestions.
I replaced the bulbs with a new led version. The blinkers work visually outside but inside you get the fast blink with a message saying the bulb isn't working
i need to know how to change the left hand bulb
What about the driver side bulb?
I changed the bulb but it's acting like I didn't. Goes to notifying me and the rapid blinks. The light is in blinking rapidly as well. Any suggestions?
Is it the same on the driver side?