Fix It Right! :: Headlight Assembly Replacement :: 2012 Chrysler Town And Country
Vložit
- čas přidán 26. 08. 2024
- "Fix It Right!" Series Two
Headlight Assembly Replacement :: 2012 Chrysler Town And Country
Synopsis
Replacing yellowed or frosted (or both) headlight assemblies is an effective way to revitalize the look of a car. However, on many vehicle this job entail removing the bumper cover. In this video, the process of replacing headlight assemblies without fully removing the bumper cover. Although the specifics will vary, similar tactics can be used for a variety of passenger vehicles.
Soundtrack
The featured artist for this video is TeknoAXE, who offers a sizeable library of songs for free under the "Creative Commons - By Attribution" license.
Visit the TeknoAXE CZcams channel for more, at: / teknoaxe
Tracks used in this video are:
Basic Distortion Run by TeknoAXE
Link: • TeknoAXE's Royalty Fre...
License: creativecommons...
At One With The Sky (Remastered) by TeknoAXE
Link: • At One With the Sky Re...
License: creativecommons...
Dude Get Off My Wave (Remastered) by TeknoAXE
Link: • Dude Get Off My Wave R...
License: creativecommons...
Evading The Enemy (Remastered) by TeknoAXE
Link: • Evading the Enemy Rema...
License: creativecommons...
This is a job I've done multiple times before, came back for a refresher. Thank u for the video, I just turned the volume down and was able to follow your directions just fine.
I watched about 5 videos on how to do this to confirm what I had already thought was possible, instead of ripping the whole front end off just to get to those 10mm bolts under the headlight assembly just remove the screws in the wheel well and the top of the cover assembly and peel it back. I am glad someone else didn't feel like laying under their van to access those push pins and deal with the fog lamps etc. I don't have access to a lift to access the bottom of my van very well and odds are I'll be doing this work on the road, I really don't feel like getting ran over. Great video, glad there is some heavier music involved if it was elevator music I would have fallen asleep. Sounds like from the other comments the saying " If it's too loud your too old" comes in to play! Rock on!!🤘
A lot of replies here whining about the music. Someone should put a video up for them on how to find their frikkin volume control and which button to push on their parent "pewter' to mute the music, IF they don't like. Personally, I TURNED IT UP!
Thank you! I will be doing this soon. While im at it, I'll put in all-new light bulbs, just because it’s easier. And I like the music! Of course i was watching at 1.75x😂
The usefulness of this video far outweighs the horrible music. I gave it a "like".
then I guess you couldn't find the volume control on your own device either. Wonderful.
video showed what I needed to know.
Excellent video. Great job. The others showed removal of front bumper. Your clip shows just unbolt front clip and lay forward to access necessary bolts.
Life saver idea... Want to do this myself. Other videos looked to complicated, thought I would have to have my mechanic do the job and charge small fortune for extra labor to remove front clip..
Should have been engineered much easier.
My old Pacifica. 2 bolts 2 minutes to replace...
Thanks a million... Great job....
Absolutely not a car guy here, but I just bought some new headlights for our van. Thanks for the video, and wish me luck! 🙂
Good video, the music is definitely something you should have cut after the intro.
Got new headlights,,, waiting few days to warm up so I can do this outside.
Thanks!
Well😂😢😢 did we forget the most important thing realignment of the headlight lol . That is the fun part
You totally rock
Thanks for sharing! Looks like I don’t have to unplug the fog lights after all! I get my lights tomorrow, and will do the same!
Great video very helpful
Thanks for the video. Very helpful.
Good visual......lose the music....replace with your dialog. Thanks
There is an up and down volume control. The ICON looks like a speaker.
Where did you order your replacement headlamp assemblies and roughly how much were they per side? I really need to replace the drivers side because the seal is broken and leaks water inside. Thx
This guy has it done the fast way i will do it your way . Me removing the hole bumper i dont think so
good job, please skip the "music" next time.
OMG- It is far easier for you to just turn the sound down than it is for us to ADD the baddass tunes in the background. Reminds me of the music on Heavy Metal game on my X-Box. Rock on!
Can you show me how to replace the support system for the headlight
I need to replace the supports for the headlight on the driver side and then the fender needs replaced and the hood and the rest of the front clip
Is there a certain brand of replacement headlight housings that you’d recommend?
Did you have to adjust the headlights after you replaced the housings? Or was it still in the same specs?
Your music is really annoying !!!
The music destroyed my attention and could not watch the video. Pls remove the music fir next videos. Thanks
Then why didn't you just turn down the sound from the beginning?
OMG- lose the stupid music and add dialog!
I like the music. Just lower or mute the video and sing along with your own tune. Problem solved.
Like others have said...lose the incredibly irritating music. I would have watched the whole thing but couldn't last longer than 30 seconds. Otherwise I am sure it would have been a helpful video
Death Metal got annoying fairly quickly. About a minute in I realized there was no dialog. Thanks but no thanks
It is 2 screws and a few bolts. We don't need to hear someone's life story. The music was very refreshing. Stright and to the point video. Believe it!
They should be a lot easyer to replace. The older model they were held in with a few bolts. Stupid design